Abstract:All-carbon flexible supercapacitors are highly promising in powering up wearable electronics in smart textiles. However, their low energy density hinders their practical application due to the lack of an effective fabrication method of highly conductive fiber electrodes with high specific capacitance. Herein, we develop a sustainable, scalable, and cost-effective method to fabricate lignin-based carbon/graphene fiber (GF) hybrid electrodes with a hierarchically porous structure. This engineered structure is achieved by coaxially wet spinning a graphene oxide fiber (GOF) as a core structural support and 0–10% lignin/graphene oxide (GO) as a surface layer, followed by carbonization and KOH activation processes. The obtained fiber electrodes exhibit the highest specific capacitance of 260.48 mF cm–2 at a current density of 0.1 mA cm–2, which is 11 times that of the neat GF from conventional wet spinning. The entire-device energy density of the assembled fiber-based flexible supercapacitors from the optimal fiber electrode is 5.79 μW h cm–2 in a H2SO4/poly(vinyl alcohol) electrolyte. Furthermore, the fiber-based flexible supercapacitors show ultralong cycling life and cycling stability (the capacitance retention rate is 98% after 7000 cycles of charge/discharge at a current density of 0.1 mA cm–2). This work enables the high-value utilization of low-cost carbon precursors (lignin and GO) in potential applications such as energy storage devices for smart textiles.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01379.Polarized optical microscopy image of GO solution at 15 mg mL–1; SEM images of the neat GF and unactivated 5% ; FTIR images of the GOF and GF; CV and GCD curves of the GF, unactivated 5% recorded at 5 mV s–1 and 0.1 mA cm–2; CV and GCD curves of flexible supercapacitors tested in a 2-electrode cell in 1 M H2SO4/PVA electrolyte of 0–10% ; electrical conductivity of ; calculated CA, CV, Esingle,A, and Psingle,A values of fiber electrodes based on GCD curves at a current density of 0.1 mA cm–2; calculated CA of fiber electrodes at different scan rates based on CV measurements; and calculated CA of fiber electrodes at current densities based on GCD measurements (PDF)This article has not yet been cited by other publications.

Silk template enabled multi‐hollow graphene fibers for electrochemical electrode

Core-shell structured carbon nanofibers yarn@polypyrrole@graphene for high performance all-solid-state fiber supercapacitors

Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

Electrochemically Exfoliated Graphene Oxide Enhanced Hybrid Fibers with High Rate Performance for Fibrous Supercapacitors

Silk fibroin reinforced graphene fibers with outstanding electrical conductivity and mechanical strength

Hybridizing Wood Cellulose and Graphene Oxide Toward High-Performance Fibers

Boosting Lithium Storage Properties of MOF Derivatives Through a Wet-Spinning Assembled Fiber Strategy.

Electrochemical Performance of Coaxially Wet-Spun Hierarchically Porous Lignin-Based Carbon/Graphene Fiber Electrodes for Flexible Supercapacitors

Aqueous supercapacitors based on carbonized silk electrodes

High‐Entropy Engineering Reinforced Surface Electronic States and Structural Defects of Hierarchical Metal Oxides@Graphene Fibers towards High‐Performance Wearable Supercapacitors

A Fiber Supercapacitor with High Energy Density Based on Hollow Graphene/Conducting Polymer Fiber Electrode

Tough, Strong, and Conductive Graphene Fibers by Optimizing Surface Chemistry of Graphene Oxide Precursor

Construction of ion/electron transfer multi-channels for the composite film electrode from GO and cellulose derived porous carbon in supercapacitor

Fabricating of High-Performance Functional Graphene Fibers for Micro-Capacitive Energy Storage

Conductive copper-based metal-organic framework nanowire arrays grown on graphene fibers for flexible all-solid-state supercapacitors

Chemical reduction-induced fabrication of graphene hybrid fibers for energy-dense wire-shaped supercapacitors

Cover Feature: Boosting Lithium Storage Properties of MOF Derivatives Through a Wet‐Spinning Assembled Fiber Strategy (chem. Eur. J. 52/2018)

Fabrication of PEDOT:PSS/rGO fibers with high flexibility and electrochemical performance for supercapacitors

Highly Crystalline Graphene Fibers with Superior Strength and Conductivities by Plasticization Spinning

Phase Inversion-Based Microfluidic-Fiber-Spinning Assembly of Self-Supported Rgo/pedot FiberFabrics Towards Wearable Supercapacitors

Ultrastrong Hybrid Fibers with Tunable Macromolecular Interfaces of Graphene Oxide and Carbon Nanotube for Multifunctional Applications