Abstract:Driven by intriguingly high energy density up to 2600 Wh/kg, lithium sulfur (Li–S) battery is considered as one of the most promising energy storage devices compared with conventional lithium ion battery. The main obstructions plaguing Li–S batteries associated with the electrical resistivity of sulfur/lithium sulfides, the dissolution of polysulfides in ether-based electrolyte and the large volume variation, result in poor cycling performance and rate capability. Here, we develop a polymer optimized cathode that is polydopamine layer coated on the surface of sulfur loaded hierarchical porous graphitic carbon composites (HPGC-S-PD) by a simple in-situ polymerization method toward the highly suppressed shuttle effect, thus the significantly improved cell performance. Attributed to the superiorities of the structure engineering including the strengthened polysulfide trapping, accelerated ionic conductivity and stable electrode construction, this cathode can deliver an excellent cycling performance over 700 cycles at 1 C, a high areal capacity of 7.25 mAh/cm2 with raised sulfur loading as high as 5.15 mg/cm2. Meanwhile, the obtained cathode can work well with a lower E/S ratio compared with the non-coated cell, which suggests the immense possibility for yielding a practically Li–S battery with high energy density based on this electrode architecture. Strikingly, the pouch cell with optimized cathode material can realize an energy density of 272 Wh/kg after 40 cycles at 0.1 C. This rational design of sulfur cathode combining HPGC with polymer coating by a scalable strategy provides a comprehensive understanding of the structural engineering for sulfur cathodes in pursuit of practically high performance Li–S batteries.

Suppressing shuttle effect by large oxygen-containing crosslinked hyperbranched polyurethane as cathode encapsulated layer for high-performance lithium-sulfur batteries

Unprecedented Strong and Reversible Atomic Orbital Hybridization Enables a Highly Stable Li-S Battery

Suppression Of Polysulfide Shuttling With A Separator Modified Using Spontaneously Polarized Bismuth Ferrite For High Performance Lithium-Sulfur Batteries

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Suppressing Shuttle Effect Using Janus Cation Exchange Membrane for High-Performance Lithium-Sulfur Battery Separator.

Electrostatic-spraying an ultrathin, multifunctional and compact coating onto a cathode for a long-life and high-rate lithium-sulfur battery

Unprecedented strong and reversible atomic orbital hybridization enables highly stable Li-S battery

In-situ constructing cathode protective film toward high performance of Li-S batteries at high sulfur loadings

Effective Suppression of the Polysulfide Shuttle Effect in Lithium–Sulfur Batteries by Implementing rGO–PEDOT:PSS-Coated Separators via Air-Controlled Electrospray

Strategy for practically constructing high-capacity sulfur cathode by combining sulfur-hierarchical porous graphitic carbon composite with surface modification of polydopamine

Synergistic inhibitory effect of ultralight CNTs-COOH@Fe3O4 modified separator on polysulfides shuttling for high-performance lithium–sulfur batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Effective Inhibition of the Polysulfide Shuttle Effect in Lithium–Sulfur Batteries By Rgo-PEDOT:PSS Coated Separators Via Air-Controlled Electrospray

Catalytic Effects in Lithium–Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect

Engineering Strategies for Suppressing the Shuttle Effect in Lithium–Sulfur Batteries

Suppressing Polysulfide Shuttling in Lithium–Sulfur Batteries via a Multifunctional Conductive Binder

Nitrogen and Oxygen Dual Self-Doped Flexible PPTA Nanofiber Carbon Paper as an Effective Interlayer for Lithium–Sulfur Batteries

SiO2 hollow nanotubes composite aramid fiber interlayer for absorbtion of polysulfides in highly stable lithium-sulfur batteries

Suppressing Shuttle Effect via Cobalt Phthalocyanine Mediated Dissociation of Lithium Polysulfides for Enhanced Li‐S Battery Performance

Capturing Polysulfides with a Functional Anhydride Compound for Lithium–Sulfur Batteries

Elastic, Conductive Coating Layer for Self‐Standing Sulfur Cathode Achieving Long Lifespan Li–S Batteries