Abstract:Objective: It is important to guarantee intra-aneurysmal stability of microcatheters during coil embolization. We developed a simple and reproducible microcatheter shaping method for medially-directed paraclinoid internal carotid artery aneurysms. Methods: An injection needle cap was used to make a smooth curve on the mandrel, which was first wound around the back end of the cap to create a primary curve. Next, a secondary curve was created using near the tip of the cap. Thus, a two-dimensional (2D), pigtail-shaped mandrel with a two-stage curve was created. The pigtail-shaped mandrel was inserted from the tip of a straight microcatheter and heat-shaped using a heat gun. Lastly, a microcatheter having a curve whose tip was approximately 6 mm longer than that of the preshaped J was created. We evaluated the ease of navigating the microcatheter into the aneurysm and its stability during coil embolization. Results: In all, 34 consecutive medially-directed paraclinoid internal carotid artery aneurysms were treated using the shaped catheters. It took 50-300 seconds (intermediate value: 90 seconds) from inserting the microcatheter with a microguide wire to navigate and place it into an aneurysm. There were no cases that required reshaping of the microcatheters during navigation into the aneurysm. There were no cases that resulted in kickback of the microcatheters from the aneurysm during coil placement, and microcatheter stability was good until the end of the procedure. In all, 12 cases required the balloon-assisted technique and three cases required stent-assisted coiling. The angiographic outcomes immediately after embolization were as follows: 25 cases (73.5%) with complete occlusion; 3 cases (8.8%) with dome filling; and 6 cases (17.6%) with a neck remnant. There were no perioperative complications. Conclusion: The shaping method with a pigtail-shaped mandrel using an injection needle cap is simple and reproducible, and is useful for medially-directed paraclinoid internal carotid artery aneurysms.

Optimal combination of microcoils, flow control, and n-butyl cyanoacrylate–Lipiodol–iopamidol (2:3:1) for feasible embolization of medium-sized arteries in an in vitro vascular model

Difference of coil distribution made by finishing coils in large size aneurysm model with radiolucent coils

Iodinated Cyanoacrylate‐based Novel Liquid Embolic Compositions with Inherent Radiopacity for Endovascular Embolization

In-vitro Pliability Assessment of Embolization Coils for Intracranial Aneurysm Treatment.

Shape Self-Adaptive Liquid Embolic Agent for Ultrafast and Durable Vascular Embolization

Pre‐shaped 4d Photocurable Ultra‐Tough Organogel Microcoils for Personalized Endovascular Embolization

Intermediate catheter use is associated with complete occlusion and dense packing in coil embolization of unruptured cerebral aneurysms: a propensity score matched study

Janus particle-engineered structural lipiodol droplets for arterial embolization

Numerical Simulation of Three-Dimensional Pulsatile Flow after Coil Embolization of a Lateral Aneurysm with a Straight Parent Vessel

How to perform intra-aneurysmal coil embolization after Pipeline deployment: a study from a hemodynamic viewpoint

Injectable Hydrogel Capable of In Situ Covalent Crosslinking for Permanent Embolization

Fusible and Radiopaque Microspheres for Embolization

[Preparation and Evaluation of Radiopaque Microspheres].

Simple and Reproducible Microcatheter Shaping Method for Coil Embolization of Medially-directed Paraclinoid Internal Carotid Artery Aneurysms

Liquid embolic agents for interventional embolization

Embolization of Ruptured Aneurysms in the Intracranial Peripheral Arteries Using N-Butyl Cyanoacrylate Glue: A Case Series

Use of 0.014-in. pushable bare platinum coils in super-selective embolization through the 1.6-Fr. microcatheter of the triaxial system

Rheological Properties of Non-Adhesive Embolizing Compounds-The Key to Fine-Tuning Embolization Process-Modeling in Endovascular Surgery

Computational Modeling and Simulation for Endovascular Embolization of Cerebral Arteriovenous Malformations with Liquid Embolic Agents

Radiopaque Highly Stiff and Tough Shape Memory Hydrogel Microcoils for Permanent Embolization of Arteries

Poly(acrylic Acid) Microspheres Loaded with Lidocaine: Preparation and Characterization for Arterial Embolization.