Abstract:Sn-C bonding coupled MXene/SnSe2 composite with SnSe2 nanosheets vertically coating on the MXene surface was prepared successfully by the solvothermal method, in which MXene matrix etched separately by HF and LiF/HCl was used to explore the improving effect on the electrochemical performance of SnSe2. It is found that MXene etched by HF acid shows more obvious accordion-like structure with larger layer spacing, and its composite with SnSe2 demonstrates better lithium and potassium storage properties. When employed as potassium-ion batteries (PIBs) anode, MXene/SnSe2 electrode can deliver a reversible capacity of 222.8 mAh·g−1 till 300 cycles at the current density of 200 mA·g−1. As an anode for lithium-ion batteries (LIBs), MXene/SnSe2 could provide high reversible capacity (515.6 mAh·g−1 after 300 cycles at 200 mA·g−1) and rate capacity (1015.1 mAh·g−1 at 500 mA·g−1 and 496.2 mAh·g−1 at 5000 mA·g−1). Even at 2000 mA·g−1, the capacity of MXene/SnSe2 can be maintained at 322.6 mAh·g−1 after 500 cycles. Further analysis by ex-situ SEM finds that the MXene/SnSe2 electrode undergoes structural reconstruction at the high current density of 2000 mA·g−1. In the first few cycles, SnSe2 nanosheets are changed into a network structure and then in-situ pulverized into many small nanoparticles, all which immerged on MXene surface and between layers. Although MXene/SnSe2 electrode experiences structural transformation, it retains apparent layered structure. This provides a fast channel for electrons and ions migration, resulting in higher Li+ diffusion rate and diffusion-controlled storage capacity. It is believed that the work could be acted as a reference for design composite with MXene and used for anode as well as other materials.

Potassium Ion-Assisted Self-Assembled MXene-K-CNT Composite as High-Quality Sulfur-Loaded Hosts for Lithium-Sulfur Batteries

Composite of Two-Dimensional Titanium Carbonitride Mxene and Nano-Sulfur As Cathode for Li-S Batteries

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

MXene-based Sulfur Composite Cathodes

Surfactant-free self-assembled MXene/carbon nanotubes hybrids for high-rate sodium- and potassium-ion storage

Triple Effect of "Conductivity-Adsorption-Catalysis" Enables MXene@FeCoNiP to be Sulfur Hosts for Lithium-Sulfur Batteries

Self-assembled sandwich hollow porous carbon sphere @ MXene composites as superior LiS battery cathode hosts

Layered CoS@NC in situ loaded onto Ti3C2Tx MXene as an efficient lithium-ion battery anode

Carbon Nanotubes-Intercalated Co-N-C As a Robust Sulfur Host for Lithium-Sulfur Batteries

High-Performance Stable Potassium–Sulfur Batteries Enabled by Free-Standing CNT Film-Based Composite Cathodes

Ultrathin MXene Nanosheets Decorated with TiO2 Quantum Dots As an Efficient Sulfur Host Toward Fast and Stable Li-S Batteries

MXene-supported NH2CNT and BiOCl composite as sulfur reservoir for Li-S batteries with high energy density

Mechanochemical Synthesis of K x Mn[Fe(CN) 6 ] and CNT Composite for High-power Potassium-ion Batteries

CuCo2S4 Nanoparticles Embedded in Carbon Nanotube Networks as Sulfur Hosts for High Performance Lithium-Sulfur Batteries

Metal‐Halide Gelated MXene and Its Use as a Bifunctional Sulfur Host Stabilizing Both Cathode and Anode for Practical Lithium–Sulfur Batteries

Composites of carbon nanotube and protonated montmorillonite as structural and chemical dual-encapsulation sulfur carrier for lithium-sulfur battery

Constructing carbon nanotube-optimized hollow Ti3C2 MXene hierarchical conductive networks for robust lithium-sulfur batteries

In situ growth of MOF-derived nitrogen-doped carbon nanotubes on hollow MXene spheres for K-ion storage

Sns2 Nanosheets Anchored On Nitrogen And Sulfur Co-Doped Mxene Sheets For High-Performance Potassium-Ion Batteries

MXene-based porous and robust 2D/2D hybrid architectures with dispersed Li3Ti2(PO4)3 as superior anodes for lithium-ion battery

Chemically bonded MXene/SnSe2 composite with special structural transformation as a high-performance anode for lithium and potassium ions battery