Proceedings: Cyclic adenosine-3', 5'-monophosphate in cerebrospinal fluid.

M. Dascombe,A. Milton

IF: 7.3

1975-06-01

British Journal of Pharmacology

Abstract:

What problem does this paper attempt to address?

NASA-approved Rotary Bioreactor Enhances Proliferation and Osteogenesis of Human Periodontal Ligament Stem Cells.

Shi Li,Zhaofeng Ma,Zhongying Niu,Hong Qian,Dongying Xuan,Rui Hou,Longxing Ni

DOI: https://doi.org/10.1089/scd.2008.0371

2009-01-01

Stem Cells and Development

Abstract:Previous studies have suggested that periodontal ligament stem cells (PDLSCs) play crucial role in regeneration of periodontal defects, and recently tissue engineering based on PDLSCs to enhance periodontal regeneration has been the focus of periodontal research. A theoretical way to achieve this goal would be to provide a "stimulatory'' environment to rapidly expand PDLSCs in vitro to expedite tissue engineering of periodontium. We hypothesize that three-dimensional (3D) dynamic simulated microgravity (SMG) culture system have effect on periodontal stem cells, and would benefit periodontal stem cells proliferation and differentiation, but up to now, there are no related reports on this aspect. In this study, we investigated the biological effect of three-dimensional dynamic SMG induced by rotary cell culture system (RCCS) on human periodontal ligament stem cells (hPDLSCs) in vitro. hPDLSCs were isolated from surgically extracted human teeth and enriched by collecting multiple colonies. hPDLSCs were inoculated on Cytodex 3 microcarriers and cultured in RCCS. The results showed that SMG affected the biology of hPDLSCs as indicated by promotion of proliferation and viability, alterations of morphology, and disorganization of microfilament system. Besides, SMG-treated hPDLSCs presented increased matrix mineralization and up-regulated expression of mineralization associated genes after incubation in osteogenic medium. For it is the first time to investigate effects of SMG on PDLSCs, the research may lend insight into variations of cell response in 3D environment, and contribute to achievement of desirable periodontal regeneration utilizing PDLSCs-based tissue engineering approaches.
Bone Marrow Mesenchymal Stem Cell-Derived Small Extracellular Vesicles Promote Periodontal Regeneration

Li Liu,Shujuan Guo,Weiwei Shi,Qian Liu,Fangjun Huo,Yafei Wu,Weidong Tian

DOI: https://doi.org/10.1089/ten.TEA.2020.0141

Abstract:Bone marrow mesenchymal stem cell-derived small extracellular vesicles (BMSC-sEVs) can be used as a potential cell-free strategy for periodontal tissue regeneration, and we aim to investigate the effect and possible mechanism of BMSC-sEV in periodontal tissue regeneration in this study. The BMSC-sEV was isolated by the Exosome Isolation™ reagent and identified by transmission electron microscopy, nanoparticle tracking analysis, and Western blotting. The human periodontal ligament cells (hPDLCs) were cocultured with BMSC-sEV in vitro to detect the effects of BMSC-sEV on hPDLC migration, proliferation, and differentiation. The BMSC-sEV loaded by hydrogel was injected into experimental periodontitis rats to verify the therapeutic effect and possible mechanism. The results showed that BMSC-sEVs were 30-150 nm vesicles and expressed the exosome protein CD63 and tumor susceptibility 101 (TSG101), which could promote the migration, proliferation, osteogenic differentiation of hPDLCs. The BMSC-sEV-hydrogel had a therapeutic effect on periodontitis rats. After administration for 4-8 weeks, microcomputed tomography and histological analysis showed that alveolar bone loss, inflammatory infiltration, and collagen destruction in the BMSC-sEV-hydrogel group were less than that in the phosphate-buffered saline (PBS)-hydrogel group and periodontitis group. Further immunohistochemical and immunofluorescent staining revealed that the number of tartrate-resistant acid phosphatase-positive cells and the expression ratio of osteoprotegerin (OPG) and receptor-activator of nuclear factor kappa beta ligand (RANKL) in the BMSC-sEV-hydrogel group were lower than that in the PBS-hydrogel group and periodontitis group, while the expression of transforming growth factor-beta 1 (TGF-β1) and the ratio of macrophage type 2 and macrophage type 1 (M2/M1) were opposite. Therefore, BMSC-sEV can promote the regeneration of periodontal tissues, and that may be partly due to BMSC-sEV involvement in the OPG-RANKL-RANK signaling pathway to regulate the function of osteoclasts and affect the macrophage polarization and TGF-β1 expression to modulate the inflammatory immune response, thereby inhibiting the development of periodontitis and immune damage of periodontal tissue. Impact statement Bone marrow mesenchymal stem cell-derived small extracellular vesicles (BMSCs-sEVs) have been proven to have similar functions to BMSCs, such as promoting the regeneration of heart, liver, kidney, and bone tissue and regulating immune responses. BMSCs are candidate seed cells of periodontal regeneration, but it is unclear about the role of BMSC-sEV on periodontal regeneration. In this study, we explored the effects and possible mechanism of BMSC-sEV on periodontal regeneration. The results of this study provide the evidence of BMSC-sEV as a cell-free strategy for periodontal regeneration.
Method for the determination of optical constants of thin films: dependence on experimental uncertainties.

J. M. del Pozo,L. Díaz

DOI: https://doi.org/10.1364/AO.31.004474

IF: 1.9

1992-08-01

Applied Optics

Abstract:The analytical dependence of sigma(n) and sigma(k) on related experimental uncertainties when conventional reflectance-transmittance methods for the determination of optical constants of thin films are used has been found. Two kinds of singularity appear. These are responsible for the loss of solution in these methods. From the properties of the derivatives of n and k with respect to the measured thickness, a new method has been developed without loss of solution. Different derivative behaviors for physical and nonphysical solutions were found. The film thickness is also determined by this method with an accuracy better than 0.2%. The method has been applied to thin films of amorphous germanium.
Extrusion bioprinting of cellular aggregates improves mesenchymal stem cell proliferation and differentiation

Liting Liang,Zhao Li,Bin Yao,Jirigala Enhe,Wei Song,Chao Zhang,Ping Zhu,Sha Huang

DOI: https://doi.org/10.1016/j.bioadv.2023.213369

Abstract:3D extrusion bioprinting brings the prospect of stem cell-based therapies in regenerative medicine. These bioprinted stem cells are expected to proliferate and differentiate to form the desired organoids into 3D structures, which is critical for complex tissue construction. However, this strategy is hampered by low reproducible cell number and viability, and organoid immaturity due to incomplete differentiation of stem cells. Hence, we apply a novel extrusion-based bioprinting process with cellular aggregates (CA) bioink, in which the encapsulated cells are precultured in hydrogels to undergo aggregation. In this study, alginate-gelatin-collagen (Alg-Gel-Col) hydrogel containing mesenchymal stem cells (MSCs) were precultured for 48 h to form CA bioink and resulted in high cell viability and printing fidelity. Meanwhile, MSCs in CA bioink showed high proliferation, stemness and lipogenic differentiative potential in contrast to that in single cell (SC) bioink and hanging drop cell spheroid (HDCS) bioink, which indicated the considerable potential for complex tissue construction. In addition, the printability and efficacy of human umbilical cord MSCs (hUC-MSCs) were further confirmed the translational potential of this novel bioprinting method.
3D Bioprinting of a Bioactive Composite Scaffold for Cell Delivery in Periodontal Tissue Regeneration

Guohou Miao,Liyu Liang,Wenzhi Li,Chaoyang Ma,Yuqian Pan,Hongling Zhao,Qing Zhang,Yin Xiao,Xuechao Yang

DOI: https://doi.org/10.3390/biom13071062

IF: 6.064

2023-06-30

Biomolecules

Abstract:Hydrogels have been widely applied to the fabrication of tissue engineering scaffolds via three-dimensional (3D) bioprinting because of their extracellular matrix-like properties, capacity for living cell encapsulation, and shapeable customization depending on the defect shape. However, the current hydrogel scaffolds show limited regeneration activity, especially in the application of periodontal tissue regeneration. In this study, we attempted to develop a novel multi-component hydrogel that possesses good biological activity, can wrap living cells for 3D bioprinting and can regenerate periodontal soft and hard tissue. The multi-component hydrogel consisted of gelatin methacryloyl (GelMA), sodium alginate (SA) and bioactive glass microsphere (BGM), which was first processed into hydrogel scaffolds by cell-free 3D printing to evaluate its printability and in vitro biological performances. The cell-free 3D-printed scaffolds showed uniform porous structures and good swelling capability. The BGM-loaded scaffold exhibited good biocompatibility, enhanced osteogenic differentiation, apatite formation abilities and desired mechanical strength. The composite hydrogel was further applied as a bio-ink to load with mouse bone marrow mesenchymal stem cells (mBMSCs) and growth factors (BMP2 and PDGF) for the fabrication of a scaffold for periodontal tissue regeneration. The cell wrapped in the hydrogel still maintained good cellular vitality after 3D bioprinting and showed enhanced osteogenic differentiation and soft tissue repair capabilities in BMP2- and PDGF-loaded scaffolds. It was noted that after transplantation of the cell- and growth factor-laden scaffolds in Beagle dog periodontal defects, significant regeneration of gingival tissue, periodontal ligament, and alveolar bone was detected. Importantly, a reconstructed periodontal structure was established in the treatment group eight weeks post-transplantation of the scaffolds containing the cell and growth factors. In conclusion, we developed a bioactive composite bio-ink for the fabrication of scaffolds applicable for the reconstruction and regeneration of periodontal tissue defects.

biochemistry & molecular biology
Sustained Release of BMSC‐EVs from 3D Printing Gel/HA/nHAP Scaffolds for Promoting Bone Regeneration in Diabetic Rats

Tingting Yang,Yunsheng Dong,Jinpeng Wan,Xiangsheng Liu,Yufei Liu,Jiaxing Huang,Jie Zhou,Hui Xiao,Lizong Tang,Yanying Wang,Shufang Wang,Hong Cai

DOI: https://doi.org/10.1002/adhm.202203131

IF: 10

2023-03-02

Advanced Healthcare Materials

Abstract:Extracellular vesicles (EVs) play an important role in intercellular communication, and have become the research focus of cell‐free tissue engineering in recent years. Previous studies have shown that the function of EVs mainly depends on the state of source cells. To determine the effect of diabetic microenvironment on EVs secreted by bone marrow mesenchymal stem cells (BMSCs), we explored the effect of normal glucose (5.5 mM) cultured BMSCs derived EVs (NG‐EVs) and high glucose (30 mM) cultured BMSCs derived EVs (HG‐EVs) in regulating the migration, proliferation and osteoblastic differentiation of BMSCs in vitro. In order to improve the bioavailability of EVs, we constructed a sustained release system of polydopamine (PDA) functionalized 3D printing gelatin/hyaluronic acid/nano‐hydroxyapatite scaffolds (S/PDA) and verified its function in the calvarial defect model of diabetic rats. We confirmed that both NG‐EVs and HG‐EVs can promote proliferation and migration, inhibit apoptosis and promote osteogenic differentiation, but the function of HG‐EVs was weaker than that of NG‐EVs. Therefore, EVs secreted by autologous cells of diabetic patients are not suitable for self‐repair. We hope that the 3D printing scaffold designed for sustained‐release EVs will provide a new strategy for acellular tissue engineering bone repair in diabetic patients. This article is protected by copyright. All rights reserved

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Expression and function of two nicotinic subunits in insect neurons.

A. Vermehren,B. Trimmer

DOI: https://doi.org/10.1002/NEU.20088

2005-02-15

Journal of Neurobiology

Abstract:Nicotinic acetylcholine receptors (nAChRs) in insects are neuron-specific oligomeric proteins essential for the central transmission of sensory information. Little is known about their subunit composition because it is difficult to express functional insect nAChRs in heterologous systems. As an alternative approach we have examined the native expression of two subunits in neurons of the nicotinic-resistant, tobacco-feeding insect Manduca sexta. Both the alpha-subunit MARA1 and the beta-subunit MARB can be detected by in situ hybridization in the majority of cultured neurons with an overlapping, but not identical, distribution. Changes in intracellular Ca(2+) evoked by nicotinic stimulation are more strongly correlated to the expression of MARA1 than MARB and are independent of cell size. Unlike the previously reported critical role of MARA1 in mediating nicotinic Ca(2+) responses, down-regulation of MARB by RNA interference (RNAi) did not reduce the number of responding neurons or the size of evoked responses, suggesting that additional subunits remain to be identified in Manduca.
Bioprinted PDLSCs with high-concentration GelMA hydrogels exhibit enhanced osteogenic differentiation in vitro and promote bone regeneration in vivo

Yaru Zhu,Wen Wang,Qiyu Chen,Tianshui Ren,Jianguang Yang,Gan Li,Yanbin Qi,Changyong Yuan,Penglai Wang

DOI: https://doi.org/10.1007/s00784-023-05135-7

2023-07-12

Clinical Oral Investigations

Abstract:We aimed to explore the osteogenic potential of periodontal ligament stem cells (PDLSCs) in bioprinted methacrylate gelatine (GelMA) hydrogels in vitro and in vivo.

dentistry, oral surgery & medicine
Small extracellular vesicles from dental follicle stem cells provide biochemical cues for periodontal tissue regeneration

Liya Ma,Nanquan Rao,Hui Jiang,Yuzhe Dai,Songtao Yang,Hefeng Yang,Jiangtian Hu

DOI: https://doi.org/10.1186/s13287-022-02767-6

2022-03-03

Abstract:Abstract Background Treatments based on stem cell-derived small extracellular vesicles (sEVs) have been explored as an alternative to stem cell transplantation-based therapies in periodontal regeneration. Dental follicle stem cells (DFSCs) have shown great potential for regenerative medicine applications. However, it is unclear whether sEVs derived from DFSCs (DFSCs-sEVs) could be used in periodontal regeneration. This study investigates whether DFSCs-sEVs could regenerate damaged periodontal tissue and the potential underlying mechanism. Methods DFSCs-sEVs were isolated and identified, and periodontal ligament stem cells (PDLSCs) were cocultured with the isolated sEVs. The effect of DFSCs-sEVs on the biological behaviour of PDLSCs was examined using EdU assay, CCK-8 assay, cell cycle analysis, wound healing, alizarin red staining, qRT-PCR, and western blot analysis. RNA sequencing and functional enrichment analysis were used to detect the signal pathway involved in the effect of DFSCs-sEVs on PDLSCs. PDLSCs were pretreated with ERK1/2 or p38 MAPK inhibitors to investigate the possible involvement of the ERK1/2 and p38 MAPK pathways. Additionally, DFSCs-sEVs were combined with collagen sponges and transplanted into the periodontal defects in SD rats, and then, pathological changes in periodontal tissue were examined using haematoxylin and eosin (HE) staining and micro-CT. Results PDLSCs could internalize DFSCs-sEVs, thereby enhancing the proliferation assessed using EdU assay, CCK-8 assay and cell cycle analysis. DFSCs-sEVs significantly enhanced the migration of PDLSCs. DFSCs-sEVs promoted osteogenic differentiation of PDLSCs, showing deep Alizarin red staining, upregulated osteogenic genes ( RUNX2 , BSP , COL1 ), and upregulated protein expression (RUNX2, BSP, COL1, ALP). We found that p38 MAPK signalling was activated via phosphorylation. Inhibition of this signalling pathway with a specific inhibitor (SB202190) partially weakened the enhanced proliferation. After DFSCs-sEVs transplantation, new periodontal ligament-like structures and bone formation were observed in the damaged periodontal area in rats. Labelled DFSCs-sEVs were observed in the newly formed periodontal ligament and soft tissue of the defect area. Conclusions Our study demonstrated that DFSCs-sEVs promoted periodontal tissue regeneration by promoting the proliferation, migration, and osteogenic differentiation of PDLSCs. The effect of DFSCs-sEVs in promoting PDLSCs proliferation may be partially attributed to the activation of p38 MAPK signalling pathway. DFSCs-sEVs provide us with a novel strategy for periodontal regeneration in the future.

cell biology,medicine, research & experimental,cell & tissue engineering
The effect of BMP-mimetic peptide tethering bioinks on the differentiation of dental pulp stem cells (DPSCs) in 3D bioprinted dental constructs

Ji Hoon Park,Gregory J Gillispie,Joshua S Copus,Weibo Zhang,Anthony Atala,James J Yoo,Pamela C Yelick,Sang Jin Lee

DOI: https://doi.org/10.1088/1758-5090/ab9492

2020-07-01

Biofabrication

Abstract:The goal of this study was to use 3D bioprinting technology to create a bioengineered dental construct containing human dental pulp stem cells (hDPSCs). To accomplish this, we first developed a novel bone morphogenetic protein (BMP) peptide-tethering bioink formulation and examined its rheological properties, its printability, and the structural stability of the bioprinted construct. Second, we evaluated the survival and differentiation of hDPSCs in the bioprinted dental construct by measuring cell viability, proliferation, and gene expression, as well as histological and immunofluorescent analyses. Our results showed that the peptide conjugation into the gelatin methacrylate-based bioink formulation was successfully performed. We determined that greater than 50% of the peptides remained in the bioprinted construct after three weeks in vitro cell culture. Human DPSC viability was >90% in the bioprinted constructs immediately after the printing process. Alizarin Red staining showed that the BMP peptide construct group exhibited the highest calcification as compared to the growth medium, osteogenic medium, and non-BMP peptide construct groups. In addition, immunofluorescent and quantitative reverse transcription-polymerase chain reaction analyses showed robust expression of dentin sialophosphoprotein and osteocalcin in the BMP peptide dental constructs. Together, these results strongly suggested that BMP peptide-tethering bioink could accelerate the differentiation of hDPSCs in 3D bioprinted dental constructs.

engineering, biomedical,materials science, biomaterials
Development of a Bone-Mimetic 3D Printed Ti6Al4V Scaffold to Enhance Osteoblast-Derived Extracellular Vesicles' Therapeutic Efficacy for Bone Regeneration

Kenny Man,Mathieu Y Brunet,Sophie Louth,Thomas E Robinson,Maria Fernandez-Rhodes,Soraya Williams,Angelica S Federici,Owen G Davies,David A Hoey,Sophie C Cox

DOI: https://doi.org/10.3389/fbioe.2021.757220

2021-10-26

Abstract:Extracellular Vesicles (EVs) are considered promising nanoscale therapeutics for bone regeneration. To date, EVs are typically procured from cells on 2D tissue culture plastic, an artificial environment that limits cell growth and does not replicate in situ biochemical or biophysical conditions. This study investigated the potential of 3D printed titanium scaffolds coated with hydroxyapatite to promote the therapeutic efficacy of osteoblast-derived EVs. Ti6Al4V titanium scaffolds with different pore sizes (500 and 1000 µm) and shapes (square and triangle) were fabricated by selective laser melting. A bone-mimetic nano-needle hydroxyapatite (nnHA) coating was then applied. EVs were procured from scaffold-cultured osteoblasts over 2 weeks and vesicle concentration was determined using the CD63 ELISA. Osteogenic differentiation of human bone marrow stromal cells (hBMSCs) following treatment with primed EVs was evaluated by assessing alkaline phosphatase activity, collagen production and calcium deposition. Triangle pore scaffolds significantly increased osteoblast mineralisation (1.5-fold) when compared to square architectures (P ≤ 0.001). Interestingly, EV yield was also significantly enhanced on these higher permeability structures (P ≤ 0.001), in particular (2.2-fold) for the larger pore structures (1000 µm). Furthermore osteoblast-derived EVs isolated from triangular pore scaffolds significantly increased hBMSCs mineralisation when compared to EVs acquired from square pore scaffolds (1.7-fold) and 2D culture (2.2-fold) (P ≤ 0.001). Coating with nnHA significantly improved osteoblast mineralisation (>2.6-fold) and EV production (4.5-fold) when compared to uncoated scaffolds (P ≤ 0.001). Together, these findings demonstrate the potential of harnessing bone-mimetic culture platforms to enhance the production of pro-regenerative EVs as an acellular tool for bone repair.
Mesenchymal Stem Cell Culture within Perfusion Bioreactors Incorporating 3D-Printed Scaffolds Enables Improved Extracellular Vesicle Yield with Preserved Bioactivity

Stephanie M Kronstadt,Divya B Patel,Louis J Born,Daniel Levy,Max J Lerman,Bhushan Mahadik,Shannon T McLoughlin,Arafat Fasuyi,Lauren Fowlkes,Lauren Hoorens Van Heyningen,Amaya Aranda,Sanaz Nourmohammadi Abadchi,Kai-Hua Chang,Angela Ting Wei Hsu,Sameer Bengali,John W Harmon,John P Fisher,Steven M Jay

DOI: https://doi.org/10.1002/adhm.202300584

Abstract:Extracellular vesicles (EVs) are implicated as promising therapeutics and drug delivery vehicles in various diseases. However, successful clinical translation will depend on the development of scalable biomanufacturing approaches, especially due to the documented low levels of intrinsic EV-associated cargo that may necessitate repeated doses to achieve clinical benefit in certain applications. Thus, here the effects of a 3D-printed scaffold-perfusion bioreactor system are assessed on the production and bioactivity of EVs secreted from bone marrow-derived mesenchymal stem cells (MSCs), a cell type widely implicated in generating EVs with therapeutic potential. The results indicate that perfusion bioreactor culture induces an ≈40-80-fold increase (depending on measurement method) in MSC EV production compared to conventional cell culture. Additionally, MSC EVs generated using the perfusion bioreactor system significantly improve wound healing in a diabetic mouse model, with increased CD31+ staining in wound bed tissue compared to animals treated with flask cell culture-generated MSC EVs. Overall, this study establishes a promising solution to a major EV translational bottleneck, with the capacity for tunability for specific applications and general improvement alongside advancements in 3D-printing technologies.
Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA

Guifang Gao,Arndt F. Schilling,Karen Hubbell,Tomo Yonezawa,Danh Truong,Yi Hong,Guohao Dai,Xiaofeng Cui

DOI: https://doi.org/10.1007/s10529-015-1921-2

2015-07-22

Biotechnology Letters

Abstract:ObjectivesBioprinting of bone and cartilage suffers from low mechanical properties. Here we have developed a unique inkjet bioprinting approach of creating mechanically strong bone and cartilage tissue constructs using poly(ethylene glycol) dimethacrylate, gelatin methacrylate, and human MSCs.ResultsThe printed hMSCs were evenly distributed in the polymerized PEG-GelMA scaffold during layer-by-layer assembly. The procedure showed a good biocompatibility with >80% of the cells surviving the printing process and the resulting constructs provided strong mechanical support to the embedded cells. The printed mesenchymal stem cells showed an excellent osteogenic and chondrogenic differentiation capacity. Both osteogenic and chondrogenic differentiation as determined by specific gene and protein expression analysis (RUNX2, SP7, DLX5, ALPL, Col1A1, IBSP, BGLAP, SPP1, Col10A1, MMP13, SOX9, Col2A1, ACAN) was improved by PEG-GelMA in comparison to PEG alone. These observations were consistent with the histological evaluation.ConclusionsInkjet bioprinted-hMSCs in simultaneously photocrosslinked PEG-GelMA hydrogel scaffolds demonstrated an improvement of mechanical properties and osteogenic and chondrogenic differentiation, suggesting its promising potential for usage in bone and cartilage tissue engineering.

biotechnology & applied microbiology
Three‐dimensional printed biomimetic multilayer scaffolds coordinated with sleep‐related small extracellular vesicles: A strategy for extracellular matrix homeostasis and macrophage polarization to enhance osteochondral regeneration

Xu‐Ran Li,Qing‐Song Deng,Po‐Lin Liu,Shu‐Hang He,Yuan Gao,Zhan‐Ying Wei,Chang‐Ru Zhang,Fei Wang,Xiao‐Qiu Dou,Helen Dawes,Shang‐Chun Guo,Shi‐Cong Tao

DOI: https://doi.org/10.1002/viw.20230069

2024-01-12

View

Abstract:Our research revealed MT‐sEV's bioactive functions for extracellular matrix homeostasis and macrophage polarization. And we utilized 3D bioprinting technology to construct a multilayer, biomimetic scaffold incorporated with MT‐sEV to promote enhanced osteochondral regeneration. Cartilage defects resulting from injury or degeneration are a common clinical problem, and due to its avascular nature, articular cartilage has poor self‐healing capacity. Three‐dimensional (3D) bioprinting has attracted great attention in tissue engineering. Melatonin (MT), a hormone mainly secreted at night, plays an important role in tissue repair. Small extracellular vesicles (sEV) are considered ideal drug delivery vehicles and MT‐sEV (sleep‐related sEV) have the potential ability to promote cartilage regeneration. Here, biomimetic multilayer scaffolds were fabricated using 3D bioprinting. A double network hydrogel, composed of methacrylated hyaluronic acid and gelatin methacryloyl (HG), was prepared. MT‐sEV and HG hydrogel were used to create a cartilage layer. A bone layer was formed using poly(ε‐caprolactone) and hydroxyapatite ultralong nanowires. Additionally, two bioinks were alternately printed at the interface layer. The results of RNA sequencing revealed the potential regulatory mechanisms. MT‐sEV showed promotional effects on cell migration, proliferation, chondrogenic differentiation, and extracellular matrix (ECM) deposition. Moreover, MT‐sEV altered macrophage polarization and regulated the expression of inflammatory cytokines. In vivo experiments demonstrated that the biomimetic multilayer scaffolds promoted cartilage regeneration. These experiments demonstrated the ability of MT‐sEV to regulate the immune microenvironment and promote the secretion of ECM, providing a promising strategy for cartilage regeneration.

materials science, biomaterials,nanoscience & nanotechnology
The Synergistic Effect of Cyclic Tensile Force and Periodontal Ligament Cell-Laden Calcium Silicate/Gelatin Methacrylate Auxetic Hydrogel Scaffolds for Bone Regeneration

Jian-Jr Lee,Hooi-Yee Ng,Yen-Hong Lin,Ting-Ju Lin,Chia-Tze Kao,Ming-You Shie

DOI: https://doi.org/10.3390/cells11132069

IF: 6

2022-06-30

Cells

Abstract:The development of 3D printing technologies has allowed us to fabricate complex novel scaffolds for bone regeneration. In this study, we reported the incorporation of different concentrations of calcium silicate (CS) powder into fish gelatin methacrylate (FGelMa) for the fabrication of CS/FGelMa auxetic bio-scaffolds using 3D printing technology. Our results showed that CS could be successfully incorporated into FGelMa without influencing the original structural components of FGelMa. Furthermore, it conveyed that CS modifications both the mechanical properties and degradation rates of the scaffolds were improved in accordance with the concentrations of CS upon modifications of CS. In addition, the presence of CS enhanced the adhesion and proliferation of human periodontal ligament cells (hPDLs) cultured in the scaffold. Further osteogenic evaluation also confirmed that CS was able to enhance the osteogenic capabilities via activation of downstream intracellular factors such as pFAK/FAK and pERK/ERK. More interestingly, it was noted that the application of extrinsic biomechanical stimulation to the auxetic scaffolds further enhanced the proliferation and differentiation of hPDLs cells and secretion of osteogenic-related markers when compared to CS/FGelMa hydrogels without tensile stimulation. This prompted us to explore the related mechanism behind this interesting phenomenon. Subsequent studies showed that biomechanical stimulation works via YAP, which is a biomechanical cue. Taken together, our results showed that novel auxetic scaffolds could be fabricated by combining different aspects of science and technology, in order to improve the future chances of clinical applications for bone regeneration.

cell biology
3D bioprinting optimization of human mesenchymal stromal cell laden gelatin-alginate-collagen bioink

Kazuyo Takeda,Alaadin Alayoubi,Eman Mirdamadi,Ahmed Zidan,Heba Degheidy,Stephen William Sawyer,Steven R. Bauer

DOI: https://doi.org/10.1088/1748-605x/aca3e7

2022-11-19

Biomedical Materials (Bristol)

Abstract:3D bioprinting technology has gained increased attention in the regenerative medicine and tissue engineering communities over the past decade with their attempts to create functional living tissues and organs de novo. While tissues such as skin, bone and cartilage have been successfully fabricated using 3D bioprinting, there are still many technical and process driven challenges that must be overcome before a complete tissue engineered solution is realized. Although there may never be a single adopted bioprinting process in the scientific community, adherence to optimized bioprinting protocols could reduce variability and improve precision with the goal of ensuring high quality printed constructs. Here, we report on the bioprinting of a gelatin-alginate-collagen bioink containing human mesenchymal stromal cells (hMSCs) which has been optimized to ensure printing consistency and reliability. The study consists of three phases: a pre-printing phase which focuses on bioink characterization; a printing phase which focuses on bioink extrudability/printability, construct stability, and printing accuracy; and a post-processing phase which focuses on the homogeneity and bioactivity of the encapsulated hMSC printed constructs. The results showed that eight identical constructs containing hMSCs could be reliably and accurately printed into stable cross-hatched structures with a single material preparation, and that batch-to-batch consistency was accurately maintained across all preparations. Analysis of the proliferation, morphology and differentiation of encapsulated hMSCs within the printed constructs showed that cells were able to form large, interconnected colonies and were capable of robust adipogenic differentiation within 14 days of culturing.
Three-dimensional Cell Printing of Gingival Fibroblast/acellular Dermal Matrix/gelatin-Sodium Alginate Scaffolds and Their Biocompatibility Evaluation in Vitro

Peng Liu,Qing Li,Qiaolin Yang,Shihan Zhang,Chunping Lin,Guifeng Zhang,Zhihui Tang

DOI: https://doi.org/10.1039/d0ra02082f

IF: 4.036

2020-01-01

RSC Advances

Abstract:Tissue engineering has emerged as a promising approach for soft tissue regeneration. Three-dimensional (3D) cell printing showed great potential for producing cell-encapsulated scaffolds to repair tissue defects. The advantage of 3D cell printing technology is precise cell loading in scaffolds to achieve tissue regeneration instead of only relying on the cells from surrounding tissue or blood. A new acellular dermal matrix/gelatin-sodium alginate (ADM/A/G) scaffold with living gingival fibroblasts was constructed by 3D cell printing technology for potential oral soft tissue regeneration in this study, and the biological characteristics of the 3D cell printing scaffolds were evaluated. The residue of nucleic acid and growth factors in ADM were detected. Three biomaterials were mixed at an appropriate radio with human gingival fibroblasts (hGFs) to prepare bioinks. Two kinds of layer scaffolds were fabricated by 3D cell printing technology. The mechanical strength and degradability of the scaffolds were determined by measuring their compressive modulus and mass loss. CCK-8 assay and calcein-AM/PI staining were conducted to detect the cell proliferation and viability in 3D cell printing scaffolds. The morphology of the hGFs in the scaffolds were observed using SEM and FITC-phalloidin staining. The expression of COL1A1, PECAM1, and VEGF-A of hGFs in the scaffolds were quantified by qRT-PCR. The gelatin-sodium alginate (A/G) scaffolds were used as control group in all experiments. Compared with the control group, 3D cell printing ADM/A/G scaffolds showed better mechanical strength and longer degradation time. The ADM/A/G scaffolds obviously had a better promotion effect on cell proliferation and viability. Most of the hGFs observed had a fully extended spindle morphology in the ADM/A/G scaffolds but oval morphology in the control group. The expression of COL1A1 was significantly higher than in the control group with time, and the expression of PECAM1 and VEGF-A was slightly higher in ADM/A/G scaffolds on day 14. 3D cell printing gingival fibroblast-ADM/A/G scaffolds showed excellent biological properties, which could be potentially useful in oral soft tissue regeneration.
3D-printed mesoporous bioactive glass/GelMA biomimetic scaffolds for osteogenic/cementogenic differentiation of periodontal ligament cells

Nianrou Mei,Yiwen Wu,Binglin Chen,Tian Zhuang,Xinge Yu,Baiyan Sui,Tingting Ding,Xin Liu

DOI: https://doi.org/10.3389/fbioe.2022.950970

IF: 5.7

2022-10-19

Frontiers in Bioengineering and Biotechnology

Abstract:Integrated regeneration of periodontal tissues remains a challenge in current clinical applications. Due to the tunable physical characteristics and the precise control of the scaffold microarchitecture, three-dimensionally (3D) printed gelatin methacryloyl (GelMA)-based scaffold has emerged as a promising strategy for periodontal tissue regeneration. However, the optimization of the printing biomaterial links the formulation and the relationship between the composition and structures of the printed scaffolds and their comprehensive properties (e.g. mechanical strength, degradation, and biological behaviors) remains unclear. Here, in this work, a novel mesoporous bioactive glass (BG)/GelMA biomimetic scaffold with a large pore size (∼300 μm) was developed by extrusion-based 3D printing. Our results showed that the incorporation of mesoporous bioactive glass nanoparticles (BG NPs) significantly improved shape fidelity, surface roughness, and bioactivity of 3D-printed macroporous GelMA scaffolds, resulting in the enhanced effects on cell attachment and promoting osteogenic/cementogenic differentiation in human periodontal ligament cells. The excellent maintenance of the macropore structure, the visibly improved cells spreading, the release of bioactive ions (Si 4+ , Ca 2+ ), the upregulation of gene expressions of osteogenesis and cementogensis, and the increase in alkaline phosphatase (ALP) activity and calcium nodules suggested that BG NPs could endow GelMA-based scaffolds with excellent structural stability and the ability to promote osteogenic/cementogenic differentiation. Our findings demonstrated the great potential of the newly formulated biomaterial inks and biomimetic BG/GelMA scaffolds for being used in periodontal tissue regeneration and provide important insights into the understanding of cell–scaffold interaction in promoting the regeneration of functional periodontal tissues.

multidisciplinary sciences
Metabolism of four thiobis(formamidine) insecticides in the mouse and the rat.

R. E. Hornish

DOI: https://doi.org/10.1021/JF00121A029

IF: 6.1

Journal of Agricultural and Food Chemistry

Abstract:
A 3D‐Bioprinted Functional Module Based on Decellularized Extracellular Matrix Bioink for Periodontal Regeneration

Xueting Yang,Yue Ma,Xiuting Wang,Shengmeng Yuan,Fangjun Huo,Genzheng Yi,Jingyi Zhang,Bo Yang,Weidong Tian

DOI: https://doi.org/10.1002/advs.202205041

IF: 15.1

2022-12-16

Advanced Science

Abstract:A biomimetic and functional periodontal module is developed using the methacrylate gelatin/decellularized extracellular matrix bioink by employing a 3D bioprinting approach. The module simulates natural anatomical complexity and biochemical microenvironment, and exhibits strong biological induction activity. Well‐aligned periodontal fibers, highly mineralized alveolar bone, as well as satisfactory bone–ligament interface integration are achieved after 3 months of implantation in vivo. Poor fiber orientation and mismatched bone–ligament interface fusion have plagued the regeneration of periodontal defects by cell‐based scaffolds. A 3D bioprinted biomimetic periodontal module is designed with high architectural integrity using a methacrylate gelatin/decellularized extracellular matrix (GelMA/dECM) cell‐laden bioink. The module presents favorable mechanical properties and orientation guidance by high‐precision topographical cues and provides a biochemical environment conducive to regulating encapsulated cell behavior. The dECM features robust immunomodulatory activity, reducing the release of proinflammatory factors by M1 macrophages and decreasing local inflammation in Sprague Dawley rats. In a clinically relevant critical‐size periodontal defect model, the bioprinted module significantly enhances the regeneration of hybrid periodontal tissues in beagles, especially the anchoring structures of the bone–ligament interface, well‐aligned periodontal fibers, and highly mineralized alveolar bone. This demonstrates the effectiveness and feasibility of 3D bioprinting combined with a dental follicle‐specific dECM bioink for periodontium regeneration, providing new avenues for future clinical practice.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry

Proceedings: Cyclic adenosine-3', 5'-monophosphate in cerebrospinal fluid.

NASA-approved Rotary Bioreactor Enhances Proliferation and Osteogenesis of Human Periodontal Ligament Stem Cells.

Bone Marrow Mesenchymal Stem Cell-Derived Small Extracellular Vesicles Promote Periodontal Regeneration

Method for the determination of optical constants of thin films: dependence on experimental uncertainties.

Extrusion bioprinting of cellular aggregates improves mesenchymal stem cell proliferation and differentiation

3D Bioprinting of a Bioactive Composite Scaffold for Cell Delivery in Periodontal Tissue Regeneration

Sustained Release of BMSC‐EVs from 3D Printing Gel/HA/nHAP Scaffolds for Promoting Bone Regeneration in Diabetic Rats

Expression and function of two nicotinic subunits in insect neurons.

Bioprinted PDLSCs with high-concentration GelMA hydrogels exhibit enhanced osteogenic differentiation in vitro and promote bone regeneration in vivo

Small extracellular vesicles from dental follicle stem cells provide biochemical cues for periodontal tissue regeneration

The effect of BMP-mimetic peptide tethering bioinks on the differentiation of dental pulp stem cells (DPSCs) in 3D bioprinted dental constructs

Development of a Bone-Mimetic 3D Printed Ti6Al4V Scaffold to Enhance Osteoblast-Derived Extracellular Vesicles' Therapeutic Efficacy for Bone Regeneration

Mesenchymal Stem Cell Culture within Perfusion Bioreactors Incorporating 3D-Printed Scaffolds Enables Improved Extracellular Vesicle Yield with Preserved Bioactivity

Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA

Three‐dimensional printed biomimetic multilayer scaffolds coordinated with sleep‐related small extracellular vesicles: A strategy for extracellular matrix homeostasis and macrophage polarization to enhance osteochondral regeneration

The Synergistic Effect of Cyclic Tensile Force and Periodontal Ligament Cell-Laden Calcium Silicate/Gelatin Methacrylate Auxetic Hydrogel Scaffolds for Bone Regeneration

3D bioprinting optimization of human mesenchymal stromal cell laden gelatin-alginate-collagen bioink

Three-dimensional Cell Printing of Gingival Fibroblast/acellular Dermal Matrix/gelatin-Sodium Alginate Scaffolds and Their Biocompatibility Evaluation in Vitro

3D-printed mesoporous bioactive glass/GelMA biomimetic scaffolds for osteogenic/cementogenic differentiation of periodontal ligament cells

Metabolism of four thiobis(formamidine) insecticides in the mouse and the rat.

A 3D‐Bioprinted Functional Module Based on Decellularized Extracellular Matrix Bioink for Periodontal Regeneration