Abstract:Polymer films are widely used as biomaterials, electronic devices, food packaging materials and gas separation membranes. practice, cross-linking is an effective method to enhance their stability and increase the strength of these films. However, conventional cross- linked polymer films cannot degrade under mild conditions. Herein, we fabricated two cross-linkable, yet biodegradable, polymer films of similar to 0.2 mm via solution casting using cinnamate-grafted polycaprolactones, namely: a poly((alpha-(cinnamoyloxymethyl)-1,2,3-triazol) caprolactone) (PCTCL133) homopolymer and a poly(caprolactone-stat-CTCL) (P(CL156-stat-CTCL28)) copolymer. The successful syntheses of the polymers were confirmed via proton nuclear magnetic resonance (H-1 NMR) spectroscopy, size exclusion chromatography (SEC), and Fourier transform infrared (FT-IR) spectroscopy. The PCTCL homopolymer appeared as a transparent film, owing to its side groups that impede its crystallinity; in contrast, the copolymer film appeared translucent, owing to its PCL segments that are easily crystallized. The cinnamate groups facilitated the cross-linking of the polymer films when irradiated by ultraviolet (UV) light; this is indicated by its insoluble character in tetrahydrofuran, which is a good solvent for both polymers. SEC analysis indicated that a fraction of the P(CL156-stat-CTCL28) film remained un-cross-linked after irradiation, owing to its crystalline structure. In contrast, UV irradiation caused the PCTCL homopolymer film to become homogeneously cross-linked, which exhibited a cross-linking density of 49% after 2 has indicated by the H-1 NMR results. Thermogravimetric analysis (TGA) indicated that cross-linking of the PCTCL films caused a minimal change in thermal stability. Both the cross-linked polymer films were able to degrade upon the addition of a modest amount of concentrated hydrochloric acid, as confirmed by SEC and 1 H NMR. However, the degradation rate significantly decreased after cross-linking, thereby indicating its tunable character that can be altered by varying the cross-linking density. In addition, the rate of degradation can be adjusted upon varying the fraction of cross-linked PCTCL groups in the copolymer. In principle, treating the polymer films with sufficient amounts of acid could form degradation products with molecular weights less than 300 g.mol(-1). To further explore the mechanical properties of such materials, we investigated the correlation between the initial concentration used for solution casting and the Young's modulus of the film by employing molecular dynamics simulations. These results indicate that tougher films are prepared when using more concentrated polymer solutions, owing to a higher degree of chain entanglement. In summary, the prepared films with tunable degradability are promising materials for biomedical applications. In principle, this platform could be utilized in hydrogels and coating materials for a broad scope of applications.

Polycaprolactone-Based Films Incorporated with Birch Tar-Thermal, Physicochemical, Antibacterial, and Biodegradable Properties

Birch Tar Introduced into Polylactide and Its Influence on the Barrier, Thermal, Functional and Biological Properties of the Film Obtained by Industrial Extrusion

Biodegradable and Gas Barrier Polylactic Acid/Star-Shaped Polycaprolactone Blend Films Functionalized with a Bio-sourced Polyelectrolyte Coating

On the Development of Polylactic Acid/Polycaprolactone Blended Films with High Retention Capacity

Poly(ε‐caprolactone): A potential polymer for biodegradable food packaging applications

Intermolecular interactions between carbon dioxide and the carbonyl groups of polylactides and poly(ε-caprolactone)

Fabrication and characterization of biodegradable active films with modified morphology based on polycaprolactone-polylactic acid-green tea extract

Cross-Linkable Yet Biodegradable Polymer Films

Development and Characterization of Biodegradable Antimicrobial Packaging Films Based on Polycaprolactone, Starch and Pomegranate Rind Hybrids

Development of a biodegradable polycaprolactone film incorporated with an antimicrobial agent via an extrusion process

Study of Thermal, Mechanical and Barrier Properties of Biodegradable PLA/PBAT Films with Highly Oriented MMT

Preparation and property evaluation of poly(ε-caprolactone)/polylactic acid/perlite biodegradable composite film

Natural lignocellulosic biomass structure inspired CNF/Lignin/PBAT composite film with thermoplastic, antibacterial and UV-blocking abilities

Degradation of Polylactic Acid/Polypropylene Carbonate Films in Soil and Phosphate Buffer and Their Potential Usefulness in Agriculture and Agrochemistry

Comprehensive study of antimicrobial polycaprolactone/clay nanocomposite films: Preparation, characterization, properties and degradation in simulated body fluid

Supercritical CO2 impregnation of PLA/PCL films with natural substances for bacterial growth control in food packaging

Biomass-Derived Plant Extracts in Macromolecular Chitosan Matrices as a Green Coating for PLA Films

Cellulose Acetate-g-Polycaprolactone Copolymerization Using Diisocyanate Intermediates and the Effect of Polymer Chain Length on Surface, Thermal, and Antibacterial Properties

Barrier and Mechanical Properties of Biodegradable Poly(ε‐caprolactone)/cellophane Multilayer Film

Phytolacca americana extract as a quality-enhancing factor for biodegradable double-layered films based on furcellaran and gelatin - Property assessment

Study on Thermal, Rheological, Mechanical, Morphological, and Barrier Properties of Poly(butylene Adipate-Co-terephthalate)/thermoplastic Starch/poly(propylene Carbonate) Biodegradable Blown Films