Thermal diffusivity and nuclear spin relaxation: a continuous wave free precession NMR study.

T. Venâncio,M. Engelsberg,R. Azeredo,L. Colnago

DOI: https://doi.org/10.1016/J.JMR.2006.03.011

2006-07-01

Abstract:

What problem does this paper attempt to address?

Grafting Mechanisms in Hybrid Miniemulsion Polymerization

JG Tsavalas,YW Luo,FJ Schork

DOI: https://doi.org/10.1002/app.11916

IF: 3

2003-01-01

Journal of Applied Polymer Science

Abstract:The ultimate objective of hybrid miniemulsion polymerization is to produce a water-based crosslinkable coating through in situ grafting of a free radical growing acrylic polymer with an unsaturated resin. Certain authors have reported low grafting while others have reported higher. This article explores the factors that influence the grafting tendencies of these systems. Methacrylates such as methyl methacrylate (MMA) have a sterically hindered radical center that lowers its reactivity toward unsaturated resin. This steric hindrance from the methyl group forces grafting of this type of monomer to occur by abstraction of a hydrogen allylic to a resinous double bond. This chain transfer produces a relatively inactive radical on the resin that reduces the grafting efficiency. The transfer process also inherently produces some degree of terminated PMMA polymer within the particle. Grafting occurs in this type of system through termination of living PMMA chains with that radical produced on the resin. For relatively water-soluble monomers such as MMA, grafting efficiency is further lessened by homogeneous nucleation resulting from the monomer hydrophilicity. These newly created particles cannot contain alkyd due to its hydrophobicity and thus inability to transport across the aqueous phase, and hence cannot produce grafted polymer. Nonetheless, degree of grafting of nearly 50% was observed in these systems. For hybrid systems involving an acrylate monomer such as butyl acrylate (BA), virtually complete grafting with alkyd was observed. This is due to the uninhibited BA radical center allowing the molecule to add directly through a resin double bond. This process offers the possibility for complete grafting. Homogeneous nucleation is not involved in this system due to the insolubility of BA in the aqueous phase. Resin double bond content and degree of conjugation also play an integral role in the grafting process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1825–1836, 2003
Highly Efficient Biobased Synthesis of Acrylic Acid

Johannes G. H. Hermens,Andries Jensma,Ben L. Feringa

DOI: https://doi.org/10.1002/anie.202112618

2021-12-13

Angewandte Chemie International Edition

Abstract:Petrochemical based polymers, paints and coatings are cornerstones of modern industry but our future sustainable society demands greener processes and renewable feedstock materials. A challenge is to access platform monomers from biomass resources while integrating the principles of green chemistry in their chemical synthesis. We present a synthesis route starting from biomass-derived furfural towards the commonly used monomers maleic anhydride and acrylic acid, implementing environmentally benign photooxygenation, aerobic oxidation and ethenolysis reactions. Maleic anhydride and acrylic acid, transformed into sodium acrylate, were isolated in yields of 85 % (2 steps) and 81 % (4 steps), respectively. With minimal waste and high atom efficiency, this biobased route provides a viable alternative to access key monomers.

chemistry, multidisciplinary
Advances in Acrylamide Bioproduction Catalyzed with Rhodococcus Cells Harboring Nitrile Hydratase

Song Jiao,Fulong Li,Huimin Yu,Zhongyao Shen

DOI: https://doi.org/10.1007/s00253-019-10284-5

IF: 5

2020-01-01

Applied Microbiology and Biotechnology

Abstract:Acrylamide is an important bulk chemical used for producing polyacrylamide, which is widely applied in diverse fields, such as enhanced oil recovery and water treatment. Acrylamide production with a superior biocatalyst, free-resting Rhodococcus cells containing nitrile hydratase (NHase), has been proven to be simple but effective, thereby becoming the main method adopted in industry to date. Under the harsh industrial conditions, however, NHase-containing Rhodococcus cells in a natural state are prone to deactivation. Thus, multiple genetic strategies able to evolve recombinant Rhodococcus biocatalysts at either the enzyme or cell level have been reported. While most of the methods on enzyme engineering concentrate on NHase stability enhancement by strengthening the flexible sites, Rhodococcus cell engineering with various methods can enhance both the NHase activity and stability as well. Developing some new types of reactors, especially the microreactor, is also an effective way to improve the hydration process efficiency. Compared with the conventional stirred tank reactor, the membrane dispersion microreactor can enhance the heat and mass transfer in the hydration process with Rhodococcus cells as biocatalysts, thereby significantly improving the productivity of the acrylamide bioproduction process.
Synthesis of biobased and versatile monomers from itaconic acid and homocysteine thiolactone and their applications in step-growth and radical polymerization approaches

Fato Niang,Adèle Brunou-Bouard,Gérard Cruz,Nadège Pantoustier,Fanny Coumes,Nicolas Illy

DOI: https://doi.org/10.1039/d4py00565a

IF: 4.6

2024-08-21

Polymer Chemistry

Abstract:In the context of the development of fully bio-based materials, access to multi-functional bio-based monomers represents one of the primary industrial challenges in the upcoming years. Itaconic acid and N -acetyl homocysteine thiolactone are two promising sustainable building blocks displaying complementary reactivities. In this paper, we design new sustainable monomers, β- N -homocysteine thiolactyl itaconamic acid and α,β- N , N ′-homocysteine thiolactyl itaconamide, by functionalizing itaconic acid with one or two thiolactone moieties by amidification reaction in water. These synthesized monomers are very versatile bearing both an activated vinyl group that can react through either radical or Michael addition mechanisms, and a thiolactone ring, which is prone to undergo nucleophilic ring-opening reaction with primary amines liberating a highly reactive thiol. The polymerizability of these two monomers was then examined according to two polymerization pathways. In a first stage, the step-growth polyaddition of both monomers according to an aminolysis-thiol-Michael addition mechanism was studied in the presence of various functional primary amines, leading to the preparation of original multi-functional oligopoly(amide-thioether)s. In a second stage, the chain-growth free radical (co)polymerization of both monomers was investigated and enabled the synthesis of COOH-containing and functionalizable polymethacrylates. All the monomer and (co)polymer structures were carefully characterized by 1 H, 13 C, COSY, and HSQC.

polymer science
Fully Oxygen-Tolerant Visible-Light-Induced ATRP of Acrylates in Water: Toward Synthesis of Protein-Polymer Hybrids

Kriti Kapil,Arman Moini Jazani,Grzegorz Szczepaniak,Hironobu Murata,Mateusz Olszewski,Krzysztof Matyjaszewski

DOI: https://doi.org/10.1021/acs.macromol.2c02537

IF: 5.5

2023-02-20

Macromolecules

Abstract:Over the last decade, photoinduced ATRP techniques have been developed to harness the energy of light to generate radicals. Most of these methods require the use of UV light to initiate polymerization. However, UV light has several disadvantages: it can degrade proteins, damage DNA, cause undesirable side reactions, and has low penetration depth in reaction media. Recently, we demonstrated green-light-induced ATRP with dual catalysis, where eosin Y (EYH2) was used as an organic photoredox catalyst in conjunction with a copper complex. This dual catalysis proved to be highly efficient, allowing rapid and well-controlled aqueous polymerization of oligo(ethylene oxide) methyl ether methacrylate without the need for deoxygenation. Herein, we expanded this system to synthesize polyacrylates under biologically relevant conditions using CuII/Me6TREN (Me6TREN = tris[2-(dimethylamino)ethyl]amine) and EYH2 at ppm levels. Water-soluble oligo(ethylene oxide) methyl ether acrylate (average M n = 480, OEOA480) was polymerized in open reaction vessels under green light irradiation (520 nm). Despite continuous oxygen diffusion, high monomer conversions were achieved within 40 min, yielding polymers with narrow molecular weight distributions (1.17 ≤ D̵ ≤ 1.23) for a wide targeted DP range (50-800). In situ chain extension and block copolymerization confirmed the preserved chain end functionality. In addition, polymerization was triggered/halted by turning on/off a green light, showing temporal control. The optimized conditions also enabled controlled polymerization of various hydrophilic acrylate monomers, such as 2-hydroxyethyl acrylate, 2-(methylsulfinyl)ethyl acrylate), and zwitterionic carboxy betaine acrylate. Notably, the method allowed the synthesis of well-defined acrylate-based protein-polymer hybrids using a straightforward reaction setup without rigorous deoxygenation.

polymer science
Facile Polymerization of Water and Triple-Bond Based Monomers Toward Functional Polyamides

Jie Zhang,Wenjie Wang,Yong Liu,Jing Zhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1021/acs.macromol.7b01592

IF: 5.5

2017-01-01

Macromolecules

Abstract:Water is an abundant, natural, and sustainable resource. However, it has not been used as a monomer for the construction of polymers. In this paper, we take this challenge and develop a new polymerization of water and triple-bond based monomers of isocyanides and bromoalkynes, and polyamides with high molecular weights (up to 41 700) and stereoregularities (the fraction of Z-isomer generally higher than 80%) are obtained in excellent yields (up to 98.1%) under mild reaction conditions. The polymers possess good solubility and exhibit high thermal stability and refractive index. The tetraphenylethene-containing polymers show the unique aggregation-enhanced emission (AEE) characteristics. Moreover, thanks to their containing bromoacrylamide groups in the main chains, these polyamides could be easily easily postmodified through different reactions, providing a convenient platform for polymer functionalization. Thus, this work not only established a stereoselective polymerization of water and triple-bond based monomers but also provided a powerful strategy for the preparation of functional polyamides under mild reaction conditions.
Zinc-Mediated Allylation-Lactonization One-Pot Reaction to Methylene Butyrolactones: Renewable Monomers for Sustainable Acrylic Polymers with Closed-Loop Recyclability

Zhen-Hua Zhang,Xing Wang,Biwei Weng,Yixin Zhang,Guozhu Zhang,Miao Hong

DOI: https://doi.org/10.1021/acspolymersau.2c00001

2022-04-18

Abstract:Despite biomass-derived methylene butyrolactone monomers having great potential in substituting the petroleum-based methacrylates for synthesizing the sustainable acrylic polymers, the possible industrial production of these cyclic monomers is unfortunately not practical due to moderate overall yields and harsh reaction conditions or a time-consuming multistep process. Here we report a convenient and effective synthetic approach to a series of biomass-derived methylene butyrolactone monomers via a zinc-mediated allylation-lactonization one-pot reaction of biorenewable aldehydes with ethyl 2-(bromomethyl)acrylate. Under simple room-temperature sonication conditions, near-quantitative conversions (>90%) can be accomplished within 5-30 min, providing pure products with high isolated yields of 70-80%. Their efficient polymerizations with a high degree of control and complete chemoselectivity were enabled by the judiciously chosen Lewis pair catalyst based on methylaluminum bis(2,6-di-tert-butyl-4-methylphenoxide) [MeAl(BHT)2] Lewis acid and 3-diisopropyl-4,5-dimethylimidazol-2-ylidene (I i Pr) Lewis base, affording new poly(methylene butyrolactone)s with high thermal stability and thermal properties tuned in a wide range as well as pendant vinyl groups for postfunctionalization. Through the development of an effective depolymerization setup (370-390 °C, ca. 100 mTorr, 1 h, a muffle furnace), thermal depolymerizations of these polymers have been achieved with monomer recovery up to 99.8%, thus successfully constructing sustainable acrylic polymers with closed-loop recyclability.
Recent progress in one-step synthesis of acrylic acid and methyl acrylate via aldol reaction: Catalyst, mechanism, kinetics and separation

Gang Wang,Zengxi Li,Chunshan Li

DOI: https://doi.org/10.1016/j.ces.2021.117052

IF: 4.7

2022-01-01

Chemical Engineering Science

Abstract:With the gradual depletion of petroleum resources, the one-step synthesis of acrylic acid/ methyl acrylate from acetic acid/methyl acetate and formaldehyde via aldol reaction, instead of propylene selective oxidation, has stimulated researchers' interest. Current research in this field focus on catalyst modification, structure–activity relationships, catalytic mechanism and kinetics, and separation process design. The faced challenging problems are efficient catalyst development, mechanism-based kinetics calculation for reactor design and separation process optimization, which hinder the industrial progress, although great efforts have been made in the last decades. Therefore, it is necessary and meaningful to review the achievements as the basis for the further exploration and application in this area. This review aims to systematically summarize and analyze the catalytic performance and structure–activity relationships of developed catalysts, catalytic mechanism and kinetics, and separation process design, as well as suggest the prospective research.

engineering, chemical
A Novel Synthesis of Acrylic Acid Containing Polymers

ML Xiang,M Jiang,XM Kong,YQ Yang,WK Lu

DOI: https://doi.org/10.1002/marc.1997.030180505

IF: 5.006

1997-01-01

Macromolecular Rapid Communications

Abstract:A novel synthesis of linear acrylic acid containing polymers, poly(styrene-co-acrylic acid) and poly(acrylic acid), was accomplished through hydrolysis of the respective parent polymers, i.e, poly(styrene-co-methyl acrylate) and poly(methyl acrylate), with trimethylsilyl iodide under mild conditions. Combination of H-1 NMR,C-13 NMR, FTIR, DSC and chemical titration confirms that the conversion from methoxycarbonyl to carboxyl is almost complete. This method is further successfully applied to synthesize poly(ethyl methacrylate-co-acrylic acid) through selective hydrolysis of the methyl acrylate units in poly(ethyl methacrylate-co-methyl acrylate).
Advancement of catalyst systems towards the formation of acrylates from CO 2 and ethylene

Niladri Maity,Nestor Garcia,E.A. Jaseer,Samir Barman,Abdullah M. Aitani,Mansour M. Tijani,Nabil Al-Yassir

DOI: https://doi.org/10.1016/j.rser.2024.114483

IF: 16.799

2024-05-18

Renewable and Sustainable Energy Reviews

Abstract:Catalytic CO 2 conversion has always been a fascinating area of research in chemistry. CO 2 being a highly abundant and commercially cheap carbon feedstock, it is immensely appealing if such conversion could be advanced to novel economical and sustainable routes to take over the existing industrial processes for accessing highly demanding organic products. Acrylic acid is produced industrially by two-step catalytic processes involving partial oxidation of propylene. Catalytic acrylic acid production by a direct oxidative C–C coupling between olefin and CO 2 has remained a great challenge for the research community due to unfavorable thermodynamics. However, reactions conducted in the presence of a suitable base leading to the acrylate product were envisaged to shed some light on this end. Indeed, this domain of exploration has gained significant interest, especially towards achieving a direct catalytic carboxylation of ethylene by CO 2 . While several earlier reviews probed into catalyst systems associated with this research, the recently surfaced promising catalysts remained unaddressed. These developments provide vital insights for designing high-performance materials in intentional applications and commercial technologies for catalytic acrylate production. Examining these developments creates an opportunity for more sustainable processes, utilizing CO 2 as a C1 feedstock, contributing significantly to the circular carbon economy. This review explores the latest advancements, offering a comprehensive overview of the gradual evolution of catalyst systems, and identifying optimal candidates for intentional applications. Special attention is given to proposed reaction mechanisms supported by theoretical studies, enhancing understanding of reaction cycles and suggesting new strategies for better catalyst systems.

energy & fuels,green & sustainable science & technology
Enzymatic Graft Polymerization from Cellulose Acetoacetate: a Versatile Strategy for Cellulose Functionalization

Wang Ruochun,Rong Liduo,Ni Shujing,Wang Qiankun,Wang Bijia,Mao Zhiping,Feng Xueling,Yuan Jinying,Sui Xiaofeng

DOI: https://doi.org/10.1007/s10570-020-03577-w

IF: 6.123

2020-01-01

Cellulose

Abstract:A novel approach was developed to prepare cellulose acetoacetate-graft-copolymers via horseradish peroxidase (HRP)-mediated polymerization. Cellulose acetoacetate (CAA), the macroinitiator, was obtained by transesterification between tert-butyl acetoacetate (t-BAA) and cellulose in ionic liquid. The CAA-graft-polyacrylamide (CAA-g-PAM) was synthesized using a ternary initiator system consisting of CAA, HRP and hydrogen peroxide (H2O2). The results of surface-initiated polymerization showed that the formation of free polymers could be inhibited in this process. The kinetics exhibited that this method is a powerful tool for obtaining graft copolymers. The effects of H2O2 concentration and reaction temperature were investigated to explore the optimal conditions for the process of enzymatic initiation. The synthesized copolymers were characterized by FT IR, NMR, TGA and elemental analysis to confirm the successful grafting of polyacrylamide chains onto the cellulose backbones. Furthermore, generality of the HRP-mediated graft polymerization approach was demonstrated using various monomers, including 2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA) and sulfobetaine methacrylate (SBMA). This efficient and robust strategy has great potential in fabrication of cellulose-based functional polymers. Enzymatic grafting polymerization from cellulose acetoacetate
Heterogeneous Brønsted Catalysis in the Solvent-Free and Multigram-Scale Synthesis of Polyalcohol Acrylates: The Case Study of Trimethylolpropane Triacrylate

Massimo Melchiorre,Maria E. Cucciolito,Roberto Esposito,Simone Silvestro,Francesco Ruffo

DOI: https://doi.org/10.3390/molecules29040918

IF: 4.6

2024-02-20

Molecules

Abstract:This article presents a thorough investigation into the synthesis of trimethylolpropane triacrylate (TMPTA) via the esterification reaction of trimethylolpropane (TMP) with acrylic acid using AmberliteTM 120 IR (H+), Amberlyst® 15, and DowexTM 50WX8 resins as heterogeneous catalysts. Preliminary comparative tests explored the impact of air flow on water removal during the reaction and different acid-to-alcohol molar ratios (3:1, 6:1, or 9:1 mol:mol). The findings revealed that introducing air significantly enhances TMPTA yield and -OH group conversion, particularly at a 6:1 acid-to-alcohol molar ratio. Based on cost considerations, AmberliteTM 120 IR (H+) was selected as the preferred catalyst for further optimization. This included evaluating the effect of catalyst loading (10%, 5.0%, and 2.5% w/wtot) and assessing the impact of a pre-drying process on resin efficiency. The study concluded that optimal conditions did not necessitate drying, requiring 120 °C, a catalyst loading of 10% w/wtot, a 4 h reaction time, an acid:alcohol ratio of 6:1 mol:mol, the presence of MEHQ (0.1% mol/molAA), and air bubbling at 6 ± 1 Nl/h. Catalyst recycling was effectively implemented with a slight reduction in catalytic activity over consecutive runs. Furthermore, the study explored a scaled-up system with a mechanical stirrer, demonstrating the potential for multi-hundred grams scale-up. Considerations for optimizing the air flow stripping system are also highlighted. In summary, this study provides valuable insights into designing and optimizing the esterification process for TMPTA synthesis, laying the foundation for potential industrial applications.

chemistry, multidisciplinary,biochemistry & molecular biology
Glycerol Ketals as Building Blocks for a New Class of Biobased (Meth)acrylate Polymers

Shailja Goyal,Fang-Yi Lin,Michael Forrester,William Henrichsen,Grace Murphy,Liyang Shen,Tung-ping Wang,Eric W. Cochran

DOI: https://doi.org/10.1021/acssuschemeng.1c02931

2021-07-26

Abstract:Here, we present an approach for developing the next generation of bio(meth)acrylates using glycerol ketals as a platform for property differentiation. Crude glycerol, a biodiesel byproduct, and ketones, derived from biomass valorization, are the building blocks for these polymeric materials. Biobased materials are witnessing a prominent boom in research and commercialization due to increased awareness about the carbon footprint and depletion of petroleum resources. Biodiesel and biopolymers are major linchpins to improve sustainable energy and material needs of the world in the coming years. Glycerol ketal (meth)acrylate monomers synthesized by the reaction of glycerol and various ketones consist of 65–74 wt % bioderived content. Glycerol ketals from different ketones used in our study (acetone, cyclopentanone, and butanone) are the pendant groups on the (meth)acrylate polymer backbone. We studied the effect of various pendant side chain ketal groups on the thermal and rheological properties of these polymers. The methacrylate polymers had a higher glass transition temperature (Tg) (8–40 °C), whereas the acrylate derivatives had a much lower Tg between −11 and 2 °C. The side chain group on these polymers offers us a robust knob to tune the thermal properties (e.g., Tg) and rheological properties (e.g., modulus and entanglement behavior) for varied applications such as hard block polymers and adhesives.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02931.CYCART RAFT chain transfer agent synthesis, 1HNMR spectra of premonomers and monomers synthesized, 1HNMR spectra of cyclopentanone ketal synthesis from crude glycerol, GC–MS spectra of glycerol ketal acrylates, TGA of (meth)acrylate glycerol ketal polymers, GPC traces of IBA macromonomer precursor and the IBA-GSA-IBA elastomer, RAFT polymerization recipes for all polymers, and characteristics of GSA containing triblock copolymers studied for PSA application (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Copolymerization of Biomass-Derived Carboxylic Acids for Biobased Acrylic Emulsions

Ashish Bohre,Mohammad Asif Ali,Martin Ocepek,Miha Grilc,Jožefa Zabret,Blaž Likozar

DOI: https://doi.org/10.1021/acs.iecr.9b04057

2019-10-09

Abstract:The production of biobased copolymers such as poly(styrene-co-butyl acrylate-co-methacrylic acid) for paints and coating applications is indispensable for the establishment of sustainable biorefineries, but it is challenging because of the utilization of fossil-based sources for the syntheses of methacrylic acid (MAA) from biomass. We have studied the catalytic decarboxylation of biobased itaconic acid, citric acid, and aconitic acid to MAA. Among different tested catalysts, the spinel BaAl12O19 chemical substance was found to grant an additional active catalysis, it optimized selectivity, and a 50% synthesis yield of MAA was achieved. The as-synthesized MAA vinyl monomer has been consequently utilized for the production of a chain-growth poly(St-co-BA-co-MAA) copolymer, industrially manufactured for coating, adhesive, and paint end-user applications. The latexes' physical properties of bio-MAA-incorporated structured polymers have also been compared with a copolymerized commercial poly(St-co-BA-co-MAA) terpolymer, fabricated from petroleumbased MAA. The functional group distribution, measured molecular weight (Mw), determined polydispersity index (ĐM), glass transition temperature (Tg), and integrated solid content (wS) of copolymerization poly(St-co-BA-co-MAA) constituent units were comparable with benchmarks.

engineering, chemical
Measurement and Modeling of Semi-Batch Solution Radical Copolymerization of N-tert-Butyl Acrylamide with Methyl Acrylate in Ethanol/Water

Gagandeep Kaur,Maryam Agboluaje,Robin A. Hutchinson

DOI: https://doi.org/10.3390/polym15010215

IF: 5

2023-01-01

Polymers

Abstract:The synthetic polymer industry is transitioning from the use of organic solvents to aqueous media in order to reduce environmental impact. However, with radical polymerization kinetics affected by hydrogen-bonding solvents, there is limited information regarding the use of water as a solvent for sparingly soluble monomers. Thus, in this paper, the radical polymerization of methyl acrylate (MA) and N-tert-butylacrylamide (t-BuAAm) is studied in water and ethanol (EtOH), as the copolymer product is of commercial interest. A series of semi-batch reactions are conducted under a range of operating conditions (i.e., reaction temperature, solvent-to-monomer ratio, and comonomer composition) to demonstrate that the copolymer can be successfully synthesized without significant drifts in product molar masses or composition. The experiments provide additional data to probe the influence of the solvent on the polymerization rate and copolymer properties, as the low monomer concentration maintained under starved-feed operation leads to a solvent-to-monomer ratio different from that in a batch system. A model that captures the influence of backbiting and solvent effects on rate, previously developed and tested against batch polymerizations, also provides an excellent description of semi-batch operation, validating the set of mechanisms and kinetic coefficients developed to represent the system.

polymer science
The biosynthesis of amidated bacterial cellulose derivatives via in-situ strategy

Jianbin Lin,Bianjing Sun,Heng Zhang,Xiaoli Yang,Xiao Qu,Lei Zhang,Chuntao Chen,Dongping Sun

DOI: https://doi.org/10.1016/j.ijbiomac.2023.124831

IF: 8.2

2023-05-01

International Journal of Biological Macromolecules

Abstract:Bacterial cellulose, as a kind of natural biopolymer produced by bacterial fermentation, has attracted wide attention owing its unique physical and chemical properties. Nevertheless, the single functional group on the surface of BC greatly hinders its wider application. The functionalization of BC is of great significance to broaden the application of BC. In this work, N-acetylated bacterial cellulose (ABC) was successfully prepared using K. nataicola RZS01-based direct synthetic method. FT-IR, NMR and XPS confirmed the in-situ modification of BC by acetylation. The SEM and XRD results demonstrated that ABC has a lower crystallinity and higher fiber width compare with pristine 88 BCE % cell viability on NIH-3 T3 cell and near zero hemolysis ratio indicate its good biocompatibility. In addition, the as-prepared acetyl amine modified BC was further treated by nitrifying bacteria to enrich its functionalized diversity. This study provides a mild in-situ pathway to construct BC derivatives in an environmentally friendly way during its metabolism.

polymer science,biochemistry & molecular biology,chemistry, applied
Hydrophilic Poly(meth)acrylates by Controlled Radical Branching Polymerization: Hyperbranching and Fragmentation

Kriti Kapil,Arman Moini Jazani,Julian Sobieski,Leticia P Madureira,Grzegorz Szczepaniak,Michael R Martinez,Adam Gorczyński,Hironobu Murata,Tomasz Kowalewski,Krzysztof Matyjaszewski

DOI: https://doi.org/10.1021/acs.macromol.4c00408

IF: 5.5

2024-05-29

Macromolecules

Abstract:Topology significantly impacts polymer properties and applications. Hyperbranched polymers (HBPs) synthesized via atom transfer radical polymerization (ATRP) using inimers typically exhibit broad molecular weight distributions and limited control over branching. Alternatively, copolymerization of inibramers (IB), such as α-chloro/bromo acrylates with vinyl monomers, yields HBPs with precise and uniform branching. Herein, we described the synthesis of hydrophilic HB polyacrylates in water by copolymerizing a water-soluble IB, oligo(ethylene oxide) methyl ether 2-bromoacrylate (OEOBA), with various hydrophilic acrylate comonomers. Visible-light-mediated controlled radical branching polymerization (CRBP) with dual catalysis using eosin Y (EY) and copper complexes resulted in HBPs with various molecular weights (M n = 38 000 to 170 000) and degrees of branching (2%-24%). Furthermore, the optimized conditions enabled the successful application of the OEOBA to synthesize linear-hyperbranched block copolymers and hyperbranched polymer protein hybrids (HB-PPH), demonstrating its potential to advance the synthesis of complex macromolecular architecture under environmentally benign conditions. Copolymerization of hydrophilic methacrylate monomer, oligo(ethylene oxide) methyl ether methacrylate (OEOMA500), and inibramer OEOBA was accompanied by fragmentation via β-carbon C-C bond scission and subsequent growth of polymer chains from the fragments. Furthermore, computational studies investigating the fragmentation depending on the IB and comonomer structure supported the experimental observations. This work expands the toolkit of water-soluble inibramers for CRBP and highlights the critical influence of the inibramer structure on reaction outcomes.
Efficient and catalyst free synthesis of acrylic plastic precursors: methyl propionate and methyl methacrylate synthesis through reversible CO2 capture

Santosh Govind Khokarale,Jyri-Pekka Mikkola

DOI: https://doi.org/10.1039/C9GC00413K

2019-10-07

RSC Green Chemistry

Abstract:Methyl propionate (MP) and methyl methacrylate (MMA) are considered as industrially important precursors upon large-scale acrylic plastic production. The existing industrial synthetic protocols of these precursors utilize expensive catalysts accompanied with toxic and explosive gases such as carbon monoxide, ethylene and hydrogen. Herein, we for the first time report highly selective, catalyst-free and room temperature synthesis of MP and MMA precursors through organic superbase involved reversible CO 2 capture approach. In short, initially equimolar mixture of organic superbase 1,8-diazabicyclo-[5.4.0]-undec-7-ene (DBU) and methanol were reversibly reacted with molecular CO 2 and the obtained switchable ionic liquid, [DBUH][MeCO 3 ] further reacted with an equivalent amount of propionic anhydride or methacrylic anhydride to form MP or MMA, respectively. These reactions were accomplished in different solvents such as DMSO and methanol whereupon, in case of methanol, separation of reaction products occurs from in-situ formed DBU derivatives such as [DBU][propionate] or [DBU][methacrylate]. In case of both MP and MMA synthesis, after use of methanol as a solvent, good recovery of alcoholic solution of esters were achieved where 85% and 92% yields of MP and MMA were obtained, respectively.The molecular DBU was recovered using NaCl saturated alkaline solution. Further, the recovered MMA with methanol was polymerised to poly-MMA using a benzoyl peroxide induced free radical polymerisation process. The synthesis and separation of MP or MMA as well as recovery of DBU was monitored by NMR analysis. Hence, unlike DMSO, methanol not only performed as a regent in CO 2 capture and as a solvent media in MP, MMA and poly-MMA synthesis but also assisted in the recovery of DBU from the reaction mixture. Most importantly, here we represented a more efficient, safer and single solvent based alternative synthetic approach for the synthesis of acrylic plastic precursors MP or MMA compared to existing industrial methods. Also, no toxic or expensive catalysts were required.
Sustainable Production of Acrylic Acid via 3-Hydroxypropionic Acid from Lignocellulosic Biomass

Sarang S. Bhagwat,Yalin Li,Yoel R. Cortes-Pena,Emma C. Brace,Teresa A. Martin,Huimin Zhao,Jeremy S. Guest

DOI: https://doi.org/10.1021/acssuschemeng.1c05441

IF: 8.4

2021-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Lignocellulosic biomass is a promising renewable feedstock for the sustainable manufacturing of biofuels and bioproducts. Among emerging bioproducts, 3-hydroxypropionic acid (3-HP) is of particular interest as a platform chemical to produce commercially significant chemicals such as acrylic acid. In this study, BioSTEAM.an open-source platform.was leveraged to design, simulate, and evaluate (via techno-economic analysis, TEA, and life cycle assessment, LCA) biorefineries producing acrylic acid via fermentation of sugars (glucose and xylose) to 3-HP. The biorefinery could produce acrylic acid with a minimum product selling price (MPSP) of $1.72-2.08.kg(-1) (5th-95th percentiles; baseline at $ 1.83.kg(-1)). Advancements in key technological parameters (fermentation yield, titer, and saccharification solids loading) could greatly enhance the biorefinery's performance (MPSP of $1.29-1.52.kg(-1) with similar to 88% probability of market-competitiveness, a global warming potential of 3.00 [2.53-3.38] kg CO2-eq.kg(-1), and a fossil energy consumption of 39.9 [31.6-45.1] MJ.kg(-1)). A quantitative sustainable design framework was used to explore alternative fermentation regimes (neutral/ low-pH fermentation across titer, yield, and productivity combinations) and alternative feedstocks (first/second-generation feedstocks across price and sugar/carbohydrate content). Overall, this research highlights the ability of agile TEA-LCA to screen promising biorefinery designs, navigate sustainability trade-offs, prioritize research needs, and establish a roadmap for the continued development of bioproducts and biofuels.
Catalytic Aerobic Oxidation of Lignocellulose-Derived Levulinic Acid in Aqueous Solution: A Novel Route to Synthesize Dicarboxylic Acids for Bio-Based Polymers

Lei Song,Rui Wang,Li Che,Yu Jiang,Mo Zhou,Yu Zhao,Jifeng Pang,Min Jiang,Guangyuan Zhou,Mingyuan Zheng,Tao Zhang

DOI: https://doi.org/10.1021/acscatal.1c02531

IF: 12.9

2021-09-03

ACS Catalysis

Abstract:The world is facing grand and ever-increasing pressures on energy and environmental issues. Using carbon-neutral biomass to prepare monomers such as dicarboxylic acids for degradable polymers is of great significance and an urgent but challenging task. Herein, we report a catalytic route for the synthesis of 2-hydroxy-2-methylsuccinic acid, an excellent monomer: e.g., it is able to remarkably enhance the comprehensive properties of polybutylene succinate as shown herein. By catalytic aerobic oxidation of levulinic acid, a bulk platform chemical derived from lignocellulose, the target product was obtained with a very high selectivity of up to ca. 95%. The mild reaction conditions below 100 °C in water and the low-cost reusable heterogeneous catalyst further make the process highly attractive for applications. This process was also found to be effective for the conversion of homologues of levulinic acid to dicarboxylic acids. We studied the C–C bond rearrangement and the roles of catalysts in the reaction that are highly likely involved in a superoxide anion radical mechanism. This study may provide inspiration for the synthesis of bio-based dicarboxylic acids via alternative routes.

chemistry, physical

Thermal diffusivity and nuclear spin relaxation: a continuous wave free precession NMR study.

Grafting Mechanisms in Hybrid Miniemulsion Polymerization

Highly Efficient Biobased Synthesis of Acrylic Acid

Advances in Acrylamide Bioproduction Catalyzed with Rhodococcus Cells Harboring Nitrile Hydratase

Synthesis of biobased and versatile monomers from itaconic acid and homocysteine thiolactone and their applications in step-growth and radical polymerization approaches

Fully Oxygen-Tolerant Visible-Light-Induced ATRP of Acrylates in Water: Toward Synthesis of Protein-Polymer Hybrids

Facile Polymerization of Water and Triple-Bond Based Monomers Toward Functional Polyamides

Zinc-Mediated Allylation-Lactonization One-Pot Reaction to Methylene Butyrolactones: Renewable Monomers for Sustainable Acrylic Polymers with Closed-Loop Recyclability

Recent progress in one-step synthesis of acrylic acid and methyl acrylate via aldol reaction: Catalyst, mechanism, kinetics and separation

A Novel Synthesis of Acrylic Acid Containing Polymers

Advancement of catalyst systems towards the formation of acrylates from CO 2 and ethylene

Enzymatic Graft Polymerization from Cellulose Acetoacetate: a Versatile Strategy for Cellulose Functionalization

Heterogeneous Brønsted Catalysis in the Solvent-Free and Multigram-Scale Synthesis of Polyalcohol Acrylates: The Case Study of Trimethylolpropane Triacrylate

Glycerol Ketals as Building Blocks for a New Class of Biobased (Meth)acrylate Polymers

Copolymerization of Biomass-Derived Carboxylic Acids for Biobased Acrylic Emulsions

Measurement and Modeling of Semi-Batch Solution Radical Copolymerization of N-tert-Butyl Acrylamide with Methyl Acrylate in Ethanol/Water

The biosynthesis of amidated bacterial cellulose derivatives via in-situ strategy

Hydrophilic Poly(meth)acrylates by Controlled Radical Branching Polymerization: Hyperbranching and Fragmentation

Efficient and catalyst free synthesis of acrylic plastic precursors: methyl propionate and methyl methacrylate synthesis through reversible CO2 capture

Sustainable Production of Acrylic Acid via 3-Hydroxypropionic Acid from Lignocellulosic Biomass

Catalytic Aerobic Oxidation of Lignocellulose-Derived Levulinic Acid in Aqueous Solution: A Novel Route to Synthesize Dicarboxylic Acids for Bio-Based Polymers