ÆTIOLOGY OF JUVENILE-ONSET DIABETES A Prospective Study

A. Cudworth,G. White,J. Woodrow,D. R. Gamble,R. Lendrum,A. Bloom

DOI: https://doi.org/10.1016/S0140-6736(77)92602-2

IF: 202.731

1977-02-01

The Lancet

Abstract:

What problem does this paper attempt to address?

Machine-learning Reprogrammable Metasurface Imager.

Lianlin Li,Hengxin Ruan,Che Liu,Ying Li,Ya Shuang,Andrea Alù,Cheng-Wei Qiu,Tie Jun Cui

DOI: https://doi.org/10.1038/s41467-019-09103-2

IF: 16.6

2019-01-01

Nature Communications

Abstract:Conventional microwave imagers usually require either time-consuming data acquisition, or complicated reconstruction algorithms for data post-processing, making them largely ineffective for complex in-situ sensing and monitoring. Here, we experimentally report a real-time digital-metasurface imager that can be trained in-situ to generate the radiation patterns required by machine-learning optimized measurement modes. This imager is electronically reprogrammed in real time to access the optimized solution for an entire data set, realizing storage and transfer of full-resolution raw data in dynamically varying scenes. High-accuracy image coding and recognition are demonstrated in situ for various image sets, including handwritten digits and through-wall body gestures, using a single physical hardware imager, reprogrammed in real time. Our electronically controlled metasurface imager opens new venues for intelligent surveillance, fast data acquisition and processing, imaging at various frequencies, and beyond.
Addressable Structured Light System Using Metasurface Optics and an Individually Addressable VCSEL Array

Chenyang Wu,Xuanlun Huang,Yipeng Ji,Tingyu Cheng,Jiaxing Wang,Nan Chi,Shaohua Yu,Connie J. Chang-Hasnain

DOI: https://doi.org/10.1364/prj.516942

IF: 7.6

2024-01-01

Photonics Research

Abstract:Structured -light (SL) based 3D sensors have been widely used in many fields. Speckle SL is the most widely deployed among all SL sensors due to its light weight, compact size, fast video rate, and low cost. The transmitter (known as the dot projector) consists of a randomly patterned vertical -cavity surface -emitting laser (VCSEL) array multiplicated by a diffractive optical element (DOE) with a fixed repeated pattern. Given that the separation of any two speckles is only one known and fixed number (albeit random), there are no other known scales to calibrate or average. Hence, typical SL sensors require extensive in -factory calibrations, and the depth resolution is limited to 1 mm at similar to 60 cm distance. In this paper, to the best of our knowledge, we propose a novel dot projector and a new addressable SL (ASL) 3D sensor by using a regularly spaced, individually addressable VCSEL array, multiplicated by a metasurface-DOE (MDOE) into a random pattern of the array. Dynamically turning on or off the VCSELs in the array provides multiple known distances between neighboring speckles, which is used as a " built-in caliper " to achieve higher accuracy of depth. Serving as a precise " vernier caliper, " the addressable VCSEL array enables fine control over speckle positions and high detection precision. We experimentally demonstrated that the proposed method can result in sub -hundred -micron level precision. This new concept opens new possibilities for applications such as 3D computation, facial recognition, and wearable devices. (c) 2024 Chinese Laser Press
Metasurface‐Based Structured Light Sensing Without Triangulation

Chengzhi Li,Xin Li,Cong He,Guangzhou Geng,Junjie Li,Xiaoli Jing,Yongtian Wang,Lingling Huang

DOI: https://doi.org/10.1002/adom.202302126

IF: 9

2023-11-22

Advanced Optical Materials

Abstract:Abstract Structured light (SL) sensing technology, based on the triangulation principle, is widely employed for depth perception in various applications such as face recognition, human‐computer interaction, machine vision, and more. In this approach, the baseline length, which refers to the distance between the projection device and the camera, is a critical parameter that affects depth measurement and system miniaturization. Recently, metasurfaces have emerged as promising devices for constructing compact optoelectronic systems due to their excellent performance in wavefront modulation of light and ultra‐thin characteristics. In this study, a metasurface‐based monocular SL depth detection scheme is proposed that incorporates a specially designed 3D holographic projection. Under this projected light field, the entire 3D space is labeled, and depth information can be obtained without considering the baseline length, which can further reduce the volume of SL systems. Additionally, a template‐matching algorithm based on correlation coefficient analysis is developed and experimentally demonstrates its feasibility by precisely positioning objects. It is believed that this work opens up a new perspective for compact, lightweight, and flexible design of SL sensing systems, and has a promising future in quantitative detection, automatic location, and industrial measurement.

materials science, multidisciplinary,optics
Metasurface-driven full-space structured light for three-dimensional imaging

Gyeongtae Kim,Yeseul Kim,Jooyeong Yun,Seong-Won Moon,Seokwoo Kim,Jaekyung Kim,Junkyeong Park,Trevon Badloe,Inki Kim,Junsuk Rho

DOI: https://doi.org/10.1038/s41467-022-32117-2

2022-10-10

Abstract:Structured light (SL)-based depth-sensing technology illuminates the objects with an array of dots, and backscattered light is monitored to extract three-dimensional information. Conventionally, diffractive optical elements have been used to form laser dot array, however, the field-of-view (FOV) and diffraction efficiency are limited due to their micron-scale pixel size. Here, we propose a metasurface-enhanced SL-based depth-sensing platform that scatters high-density ~10 K dot array over the 180° FOV by manipulating light at subwavelength-scale. As a proof-of-concept, we place face masks one on the beam axis and the other 50° apart from axis within distance of 1 m and estimate the depth information using a stereo matching algorithm. Furthermore, we demonstrate the replication of the metasurface using the nanoparticle-embedded-resin (nano-PER) imprinting method which enables high-throughput manufacturing of the metasurfaces on any arbitrary substrates. Such a full-space diffractive metasurface may afford ultra-compact depth perception platform for face recognition and automotive robot vision applications.
Metasurface for Structured Light Projection over 120° Field of View

Yibo Ni,Sai Chen,Yujie Wang,Qiaofeng Tan,Shumin Xiao,Yuanmu Yang

DOI: https://doi.org/10.1021/acs.nanolett.0c02586

2020-09-09

Abstract:Structured light projection is a widely adopted approach for depth perception in consumer electronics and other machine vision systems. Diffractive optical element (DOE) is a key component for structured light projection that redistributes a collimated laser beam to a spot array with uniform intensity. Conventional DOEs for laser spot projection are binary-phase gratings, suffering from low efficiency and low uniformity when designed for a large field of view (FOV). Here, by combining vectorial electromagnetic simulation and interior-point method for optimization, we experimentally demonstrate polarization-independent silicon-based metasurfaces that can project a collimated laser beam to a spot array in the far-field with an exceedingly large FOV over 120° × 120°. The metasurface DOE with large FOV may benefit a number of depth perception-related applications such as face-unlock and motion sensing.
Embedded Three-Dimensional Shape Measurement System with Microprojector

Farong Hu,Wanzhen Zhang,Bin Lin

DOI: https://doi.org/10.1117/12.975229

2012-01-01

Abstract:An embedded system implementing fringe encoding, image acquisition and algorithm processing has been recently designed and developed for 3D shape measurement based on structured light technology. Compared with traditional 3D shape measurement system, which has disadvantages of complex structure and slow processing speed, our embedded system is more effective in industrial quality detection. With self-developed digital micro projector based on liquid crystal on silicon, the structured light patterns are projected by high-resolution such as 720p. In the generated module of the stripes, we add a Gamma value to lower the projection error. Image acquisition sensor is synchronized with the micro projector by EP2C8 FPGA hardware circuits, which simultaneously control the phase encoding fringes according to different characteristic objects. To get high performance, accurate synchronization is crucial, especially in Phase Shifting Method, there are sequential images with shifting phases, in other words hardware circuit guarantee the processing speed before algorithm processing. We improved the three step phase algorithm, using the intensity modulation, which is a relatively simple method to solve the intensity imbalance of the three images. By implementing the digital signal processing (DSP) TMS320DM642 system, we realized three-dimensional measurement with a pipeline process of structure light encoding, image acquisition and three-dimensional reconstruction. Finally the measure experiment shows that the processing frame rate is up to 16 fps, and the measurement error is less than three percent. It means we can quickly and accurately detect three-dimensional profile with the portable device.
Polarimetric Target Depth Sensing in Ambient Illumination Based on Polarization-Coded Structured Light.

Xiao Huang,Yujie Luo,Jian Bai,Ruiqi Cheng,Kejing He,Kaiwei Wang,Qun Liu,Yupeng Luo,Juan Du

DOI: https://doi.org/10.1364/ao.56.007741

IF: 1.9

2017-01-01

Applied Optics

Abstract:Depth sensing is a basic issue in three-dimensional computer vision, and structured light is one of the most prevailing methods for it. However, complex surroundings and strong ambient illumination are fairly unfavorable to depth sensing based on structured light. Complex surroundings increase computation overhead and require extra effort to be separated from the target object. Strong ambient illumination is unfavorable to the signal-noise ratio of structured light and, thus, increases the difficulty of decoding. In this paper, we propose that the polarization-coded structured light is capable of target enhanced depth sensing in ambient illumination. We present the polarimetric principle, an improved algorithm of polarization-coded structured light, and signal-noise-ratio analysis in ambient illumination. Experimental results show that polarization-coded structured light is efficient and robust for target depth sensing of a complicated environment. The polarization-coded structured light is promising to the target depth sensing in an outdoor scenario and industrial inspection.
Metalens-integrated Compact Imaging Devices for Wide-Field Microscopy

Beibei Xu,Hanmeng Li,Shenglun Gao,Xia Hua,Cheng Yang,Chen,Feng Yan,Shining Zhu,Tao Li

DOI: https://doi.org/10.1117/1.ap.2.6.066004

IF: 13.582

2020-01-01

Advanced Photonics

Abstract:Metasurfaces have demonstrated unprecedented capabilities in manipulating light with ultrathin and flat architectures. Although great progress has been made in the metasurface designs and function demonstrations, most metalenses still only work as a substitution of conventional lenses in optical settings,whose integration advantage is rarely manifested. We propose a highly integrated imaging device with silicon metalenses directly mounted on a complementary metal oxide semiconductor image sensor, whose working distance is in hundreds of micrometers. The imaging performances including resolution, signal-to-noise ratio,and field of view（FOV） are investigated. Moreover, we develop a metalens array with polarization-multiplexed dual-phase design for a wide-field microscopic imaging. This approach remarkably expands the FOV without reducing the resolution, which promises a non-limited space-bandwidth product imaging for wide-field microscopy. As a result, we demonstrate a centimeter-scale prototype for microscopic imaging, showing uniqueness of meta-design for compact integration.
Calibration-free Deep Optics for Depth Estimation with Precise Simulation

Zhengyue Zhuge,Hao Xu,Shiqi Chen,Jiahui Xu,Qi Li,Huajun Feng,Zhihai Xu,Yueting Chen

DOI: https://doi.org/10.1016/j.optlaseng.2024.108313

IF: 5.666

2024-01-01

Optics and Lasers in Engineering

Abstract:Monocular depth estimation is an important computer vision task widely explored in fields such as autonomous driving, robotics, and more. Recently, deep optics approaches that optimize diffractive optical elements (DOEs) with differentiable frameworks have improved depth estimation performance. However, they only consider on-axis point spread functions (PSFs) and are highly dependent on system calibration. We propose a precise end-to-end paradigm combining ray tracing and angular spectrum diffraction. With this approach, we jointly trained a DOE and a reconstruction network for depth estimation and image restoration. Compared with conventional deep optics approaches, we accurately simulate both on-axis and off-axis PSFs, eliminating the need for calibration. We have validated the high similarity between captured PSFs and simulated ones at 19.4∘ field-of-view (FOV). Our optimized phase mask and network achieve state-of-the-art performance among semantic-based monocular depth estimation and existing deep optics methods. During real-world experiments, our prototype camera shows depth distributions similar to the Intel D455 infrared structured light camera.
Harnessing Geometric Phase Metasurfaces to Double the Field of View in Polarized Structured Light Projection for Depth Sensing

Chia-Hsun Chang,Wen-Cheng Hsu,Chih-Ting Chang,You-Chia Chang,Chi-Wai Chow,Hsin-Chieh Yu,Yao-Wei Huang,Gong-Ru Lin,Yu-Heng Hong,Hao-Chung Kuo

DOI: https://doi.org/10.1109/jphot.2024.3429348

IF: 2.4

2024-07-26

IEEE Photonics Journal

Abstract:Herein, a lucid meta-holographic approach leveraging geometric phase metasurfaces and photonic crystal surface-emitting lasers is presented. Such a straightforward technique inherently enables polarized structured light projection with opposite circular polarization states, effectively doubling the field of view for depth sensing applications. Furthermore, the innate polarization state of projected light provides enhanced resistance to environmental interference. To demonstrate the practical utility of this method, an integrated depth sensing system based on the geometric phase meta-hologram has been developed and successfully detects targets at an operating distance of 75 cm, paving the way for advanced 3D sensing applications in various fields.

engineering, electrical & electronic,optics,physics, applied
Multi-wavelength structured light based on metasurfaces for 3D imaging

Baiying Lyu,Chen Chen,Jian Wang,Chang Li,Wei Zhang,Yuxiang Feng,Fei Dong,BaoShun Zhang,Zhongming Zeng,Yiqun Wang,Dongmin Wu

DOI: https://doi.org/10.1515/nanoph-2023-0885

IF: 7.5

2024-02-09

Nanophotonics

Abstract:Structured light projection provides a promising approach to achieving fast and non-contact three-dimensional (3D) imaging. The resolution is a crucial index that represents security and accuracy in applications such as face recognition and robot vision. It depends on the density of dots in the projection. However, further improving the density of dots in the current system must be at the cost of speed or volume. Here, an all-dielectric ultra-thin metasurface is designed and fabricated to project a multi-wavelength dot array. The density of dots is improved because projected dots with different wavelengths fill the gaps with each other. The experimental results demonstrate that the multi-wavelength projection improves the resolution of 3D imaging. Furthermore, the multi-wavelength system is beneficial to measuring a surface with varying colors. The approach has the potential to achieve a new generation of high-resolution systems for tiny fluctuations and colorful 3D imaging in dark environments.

optics,physics, applied,materials science, multidisciplinary,nanoscience & nanotechnology
Compact structured light generation based on meta-hologram PCSEL integration

Wen-Cheng Hsu,Chia-Hsun Chang,Yu-Heng Hong,Hao-Chung Kuo,Yao-Wei Huang

DOI: https://doi.org/10.1186/s11671-023-03866-w

2023-06-19

Abstract:Metasurfaces, a catalog of optical components, offer numerous novel functions on demand. They have been integrated with vertical cavity surface-emitting lasers (VCSELs) in previous studies. However, the performance has been limited by the features of the VCSELs such as low output power and large divergence angle. Although the solution of the module of VCSEL array could solve these issues, the practical application is limited by extra lens and large size. In this study, we experimentally demonstrate reconstruction of a holographic images using a compact integration of a photonic crystal surface-emitting laser and metasurface holograms designed for structured light generation. This research showcases the flexible design capabilities of metasurfaces, high output power (on the order of milliwatts), and the ability to produce well-uniformed images with a wide field of view without the need for a collection lens, making it suitable for 3D imaging and sensing.
Single-shot 3D imaging with point cloud projection based on metadevice

Xiaoli Jing,Ruizhe Zhao,Xin Li,Qiang Jiang,Chengzhi Li,Guangzhou Geng,Junjie Li,Yongtian Wang,Lingling Huang

DOI: https://doi.org/10.1038/s41467-022-35483-z

2022-12-21

Abstract:Three-dimensional (3D) imaging is a crucial information acquisition technology for light detection, autonomous vehicles, gesture recognition, machine vision, and other applications. Metasurface, as a subwavelength scale two-dimensional array, offers flexible control of optical wavefront owing to abundant design freedom. Metasurfaces are promising for use as optical devices because they have large field of view and powerful functionality. In this study, we propose a flat optical device based on a single-layer metasurface to project a coded point cloud in the Fourier space and explore a sophisticated matching algorithm to achieve 3D reconstruction, offering a complete technical roadmap for single-shot detection. We experimentally demonstrate that the depth accuracy of our system is smaller than 0.24 mm at a measurement distance of 300 mm, indicating the feasibility of the submillimetre measurement platform. Our method can pave the way for practical applications such as surface shape detection, gesture recognition, and personal authentication.
Single-shot three-dimensional imaging with a metasurface depth camera

Shane Colburn,Arka Majumdar

DOI: https://doi.org/10.48550/arXiv.1910.12111

2019-10-27

Abstract:Depth imaging is vital for many emerging technologies with applications in augmented reality, robotics, gesture detection, and facial recognition. These applications, however, demand compact and low-power systems beyond the capabilities of state-of-the-art depth cameras. Here, we leverage ultrathin dielectric metasurfaces to demonstrate a solution that, with a single surface, replicates the functionality of a high-performance depth camera typically comprising a spatial light modulator, polarizer, and three lenses. Using cylindrical nano-scatterers that can arbitrarily modify the phase of an incident wavefront, our metasurface passively encodes two complementary optical responses to depth information in a scene with a single camera snapshot. By decoding the captured data in software, our system produces a fully reconstructed image and transverse depth map of three-dimensional scenes with a fractional ranging error of 1.7%. We demonstrate the first visible wavelength and polarization-insensitive metasurface depth camera, representing a significant form factor reduction for such systems.

Optics,Image and Video Processing
A Meta-Device for Intelligent Depth Perception

Mu Ku Chen,Xiaoyuan Liu,Yongfeng Wu,Jingcheng Zhang,Jiaqi Yuan,Zhengnan Zhang,Din Ping Tsai

DOI: https://doi.org/10.1002/adma.202107465

Abstract:The optical illusion affects depth-sensing due to the limited and specific light-field information acquired by single-lens imaging. The incomplete depth information or visual deception would cause cognitive errors. To resolve this problem, an intelligent and compact depth-sensing meta-device that is miniaturized, integrated, and applicable for diverse scenes in all light levels is demonstrated. The compact and multifunction stereo vision system adopts an array with 3600 achromatic meta-lenses and a size of 1.2 × 1.2 mm2 to measure the depth over a 30 cm range with deep-learning support. The meta-lens array can act as multiple imaging lenses to collect light field information. It can also work with a light source as an active optical device to project a structured light. The meta-lens array can serve as the core functional component of a light-field imaging system under bright conditions or a structured-light projection system in the dark. The depth information in both ways can be analyzed and extracted by the convolutional neural network. This work provides a new avenue for the applications such as autonomous driving, machine vision, human-computer interaction, augmented reality, biometric identification, etc.
Monocular Metasurface for Structured Light Generation and 3D Imaging with a Large Field-of-View

Yixiong Luo,Xiaoyin Li,Runzhe Zhang,Yinghui Guo,Mingbo Pu,Yulong Fan,Qi Zhang,Qiong He,Jianqiang Che,Zeyu Zhao,Xiangang Luo

DOI: https://doi.org/10.1021/acsami.4c09254

IF: 9.5

2024-07-19

ACS Applied Materials & Interfaces

Abstract:Structured light three-dimensional (3D) imaging technology captures the geometric information on 3D objects by recording waves reflected from the objects' surface. The projection angle and point number of the laser dots directly determine the field-of-view (FOV) and the resolution of the reconstructed image. Conventionally, diffractive optical elements with micrometer-scale pixel size have been used to generate laser dot arrays, leading to limited FOV and point number within the projection...

materials science, multidisciplinary,nanoscience & nanotechnology
On‐Chip Generation of Structured Light Based on Metasurface Optoelectronic Integration

Qiu‐Hua Wang,Pei‐Nan Ni,Yi‐Yang Xie,Qiang Kan,Pei‐Pei Chen,Pan Fu,Jun Deng,Tai‐Lai Jin,Hong‐Da Chen,Ho Wai Howard Lee,Chen Xu,Patrice Genevet

DOI: https://doi.org/10.1002/lpor.202000385

2021-02-01

Abstract:<p>Metasurfaces offer complete control of optical wavefront at the subwavelength scale, advancing a new class of artificial planar optics, including lenses, waveplates, and holograms, with unprecedented merits over conventional optical components. In particular, the ultrathin, flat, and compact characteristics of metasurfaces facilitate their integration with semiconductor devices for the development of miniaturized and multifunctional optoelectronic systems. In this work, generation of structured light is implemented at an ultracompact wafer‐level through the monolithic integration of metasurface with standard vertical cavity surface‐emitting lasers (VCSELs). This work opens new perspectives for the design of structured light systems with compactness, lightweight, and scalability. Ultracompact beam structured laser chips with versatile functionalities are experimentally demonstrated, including multichannel beams array generation, on‐chip large‐angle beam steering up to 60°, and wafer‐level holographic beam shaping with a wide field of view (about 124°). The results will promote the development of compact light structuring systems with great potential in 3D imaging, displays, robotic vision, human–computer interaction, and augmented/virtual reality.</p>

physics, condensed matter,optics, applied
High-precision 3D shape measurement based on time-resolved VCSEL

Jing Ye,Changhe Zhou,Chao Li,Chaofeng Miao

DOI: https://doi.org/10.1117/12.2502417

2018-11-08

Abstract:High-speed and high-precision human face 3D shape measurement plays a very important role in diverse applications such as human-computer interaction, 3D face recognition, Virtual Reality. This paper introduces a structured light system based on VCSEL(Vertical Cavity Surface Emitting Laser) with one simulated projectors and two camera for human face 3D shape measurement. Large-scale production cost of VCSEL is low, because of the manufacturing process compatible with LED. VCSEL has the advantages of projecting a large area of diffractive structure light and easy to integrate into lens array internally. The process of VCSEL projecting the structural light that changes over time to human face is simulated by computer. The ICP algorithm is used to match the image of single frame structure light from the right camera to the left camera. A single frame image of three-dimensional face point cloud is obtained by using binocular stereo vision principle. The multi-frame images of point cloud that change along time series are superposed to obtain higher density point cloud data and improve the measurement accuracy. This 3D measurement based on VCSEL has advantages of low cost, high precision, and small size and should be useful for practical applications.
MEMS-mirror-based Dynamic Structured Light Projection System for Three-Dimensional Measurement with High Precision

Yihao Tao,Gaopeng Xue,Ning Ding,Qian Zhou,Kai Ni,Xiaohao Wang,Xinghui Li

DOI: https://doi.org/10.1117/12.2602222

2021-01-01

Abstract:Three-dimensional (3D) measurement based on structured light, as a non-contact, active, and high-precision measurement technology, is widely applied in the diverse fields of industrial detection, face recognition, reverse engineering, and so on. We adopted an adjustable grating-stripe coding as the dynamic structured-light mode, which can continuously cover the entire measured surface to guarantee high accuracy. A one-axis resonant-mode MEMS mirror combined with a linear laser was used to project the desired adjustable grating stripes, leading to a miniaturized module size. To make the scanning angle of the MEMS mirror matching the intensity distribution of the linear laser, we further introduced a single-chip microcomputer (STM32) to receive the feed-back signals from MEMS mirror, and synchronously controlled the laser power with corresponding function relationship output. Here, the MEMS mirror could provide a resonant frequency of 1.15 kHz, a scanning optical angle of +/- 30 degrees, a feed-back scanning-angle resolution of 0.05 degrees, and a reflected mirror size of 3 mm-diameter circle, respectively. Also, the laser source could generate a line width of 70 mu m at a 300 mm focused distance. To decrease the error in the energy amplitude of each cycle of the structured light stripes, the empirical mode decomposition (EMD) was used to perform principal component analysis and recombination of the structured light stripes. In addition, total harmonic distortion (THD) is used to evaluate the quality of structured light stripes. Finally, the structured light based on the scanning of the MEMS mirrors exhibits a good sinusoidal stripes and high refresh rate, implying high adaptivity for the 3D reconstruction.
Realizing depth measurement and edge detection based on a single metasurface

Siwen Yang,Qunshuo Wei,Ruizhe Zhao,Xin Li,Xue Zhang,Yao Li,Junjie Li,Xiaoli Jing,Xiaowei Li,Yongtian Wang,Lingling Huang

DOI: https://doi.org/10.1515/nanoph-2023-0308

IF: 7.5

2023-07-13

Nanophotonics

Abstract:How to simultaneously obtain the depth, edge, and other light information of the scene to accurately perceive the physical world is an important issue for imaging systems. However, such tasks usually require bulky optical components and active illumination methods. Here, we design and experimentally validate a single geometric metasurface that can achieve depth measurement or edge detection under incoherent or coherent light respectively. Double helix point source function is utilized, and three verification experiments are carried out, including double-helix beam calibration, 2D object and 3D object detection, respectively. Additionally, two-dimensional edge detection can also be achieved. This compact imaging system can enable new applications in various fields, from machine vision to microscopy.

optics,physics, applied,materials science, multidisciplinary,nanoscience & nanotechnology

ÆTIOLOGY OF JUVENILE-ONSET DIABETES A Prospective Study

Machine-learning Reprogrammable Metasurface Imager.

Addressable Structured Light System Using Metasurface Optics and an Individually Addressable VCSEL Array

Metasurface‐Based Structured Light Sensing Without Triangulation

Metasurface-driven full-space structured light for three-dimensional imaging

Metasurface for Structured Light Projection over 120° Field of View

Embedded Three-Dimensional Shape Measurement System with Microprojector

Polarimetric Target Depth Sensing in Ambient Illumination Based on Polarization-Coded Structured Light.

Metalens-integrated Compact Imaging Devices for Wide-Field Microscopy

Calibration-free Deep Optics for Depth Estimation with Precise Simulation

Harnessing Geometric Phase Metasurfaces to Double the Field of View in Polarized Structured Light Projection for Depth Sensing

Multi-wavelength structured light based on metasurfaces for 3D imaging

Compact structured light generation based on meta-hologram PCSEL integration

Single-shot 3D imaging with point cloud projection based on metadevice

Single-shot three-dimensional imaging with a metasurface depth camera

A Meta-Device for Intelligent Depth Perception

Monocular Metasurface for Structured Light Generation and 3D Imaging with a Large Field-of-View

On‐Chip Generation of Structured Light Based on Metasurface Optoelectronic Integration

High-precision 3D shape measurement based on time-resolved VCSEL

MEMS-mirror-based Dynamic Structured Light Projection System for Three-Dimensional Measurement with High Precision

Realizing depth measurement and edge detection based on a single metasurface