Guest Editors' Introduction - Special Issue on Supporting Multiple Criteria Decisions

P. Korhonen,J. Wallenius

DOI: https://doi.org/10.1142/S021962201302001X

2013-10-02

Abstract:

What problem does this paper attempt to address?

Functionalized Non-Glass Fiber Nanoporous Separator for High-Performance Aqueous Zinc Ion Batteries

Dian Zhao,Yanzhu Luo,He Qi,Shaojie Guo,Ziyan Zheng,Bangju Wang,Liqiang Mai

DOI: https://doi.org/10.1021/acsanm.3c06229

IF: 6.14

2024-03-15

ACS Applied Nano Materials

Abstract:The escalating demand for energy coupled with the escalating concerns over environmental pollution has propelled the advancement of renewable energy technologies. Among these, aqueous zinc ion batteries (AZIBs) stand out as the most promising energy system for large-scale storage, attributed to their high safety standards, cost-effectiveness, and substantial volumetric capacity. However, significant scientific challenges persist, encompassing issues such as the formation of zinc anode dendrites, hydrogen precipitation reactions, and the dissolution of anode materials in AZIBs. A critical component in this context is the separator, which serves as a pivotal barrier preventing direct contact between the positive and negative electrodes, thereby exerting a substantial influence on the reversible cycle life of AZIBs. Notably, commercial glass fiber (GF) separators are marred by insufficient mechanical toughness and considerable thickness, resulting in compromised electrochemical performance. Consequently, there exists an urgent imperative to explore and scrutinize alternative non-GF nanoporous separator materials to realize high-performance AZIBs. This paper provides a comprehensive review of recent non-GF nanoporous separator types and summarizes the current research status on their modification methods. Moreover, the paper offers a forward-looking perspective on the potential advancements in separators for AZIBs.

materials science, multidisciplinary,nanoscience & nanotechnology
Enhancing aqueous zinc-ion energy storage performance with ion-mediating carbon quantum dots-modified separators regulating zinc deposition behavior

Ting Wang,Penggao Liu,Xinyue Chen,Yingying Guo,Chunrong He,Jia Guo,Weifang Liu,Shasha Gao,Yan Lv,Kaiyu Liu

DOI: https://doi.org/10.1016/j.jcis.2024.08.175

2024-08-24

Abstract:Aqueous zinc-ion batteries (AZIBs) hold promising applications owing to their safety, cost-effectiveness, and competitive capacity. However, issues such as zinc dendritic formation and side reactions severely impede their practical viability. Utilizing carbon quantum dots (CQDs) to modify cheap, tenacious, and highly hydrophilic filter paper (FP) as separator effectively improves the electrochemical performance of zinc ion energy storage systems. The structured arrangement of CQDs redistributes zinc ion transport and induces uniform zinc icon deposition, thereby improving zinc ion reaction kinetics. Moreover, the rich functional groups on the surface of CQDs readily form hydrogen bonds with active H2O, further inhibiting corrosion reactions. With the assistance of CQDs, the FP-CQDs separator maintains high ionic conductivity and a high zinc-ion transference number, ensuring dendrite-free and corrosion-resistant operation with high coulombic efficiency and a prolonged lifespan of 1200 h at 1 mA cm-2. Zn//AC hybrid capacitors incorporating FP-CQDs separator demonstrate superior capacity retention compared to those using FP separator alone, with a high capacity retention after 600 cycles at 1 A/g, while Zn//V2O5 full batteries also exhibit excellent cycling stability. Given these findings, this study presents a new composite separator for advanced aqueous zinc-ion energy storage systems.
Advanced Filter Membrane Separator for Aqueous Zinc‐Ion Batteries

Yao Qin,Ping Liu,Qi Zhang,Qi Wang,Dan Sun,Yougen Tang,Yu Ren,Haiyan Wang

DOI: https://doi.org/10.1002/smll.202003106

IF: 13.3

2020-09-02

Small

Abstract:Aqueous zinc‐ion batteries with low cost and inherent safety are considered to be the next‐generation energy storage device. However, they suffer from poor cycling stability and low coulombic efficiency caused by the serious zinc dendrites during the cycling. In this work, a porous water‐based filter membrane is first proposed as separator due to its good toughness and uniform pore distribution. The results demonstrate that the symmetrical cell using a filter membrane can cycle over 2600 h with a low voltage hysteresis of 47 mV. Moreover, an aqueous Zn//NaV3O8·1.5H2O cell based on the filter membrane is constructed, which demonstrates a high capacity retention of 83.8% after 5000 cycles at 5 A g−1. The mechanism research results reveal that the excellent dendrites inhibiting the ability of the filter membrane should be attributed to its uniform pore distribution rather than its composition. This work proposes a filter membrane separator and reveals the great influence of separator on the zinc stripping/plating process, which will shed light on the development of high‐performance aqueous zinc‐ion batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
PBC@Cellulose-Filter Paper Separator Design with Efficient Ion Transport Properties Toward Stabilized Zinc-ion Battery

Linbo Li,Jiaxin Peng,Xuefeng Jia,Xiaojie Zhu,Bicheng Meng,Kai Yang,Dewei Chu,Naixing Yang,Juan Yu

DOI: https://doi.org/10.1016/j.electacta.2022.141129

IF: 6.6

2022-08-31

Electrochimica Acta

Abstract:The uneven pore structure and sluggish transport kinetics of the separator will accelerate the growth of dendrites and directly deteriorate the performance of zinc metal battery. Herein, we present a simple and unique interface engineering strategy to anchor persimmon branch carbon (PBC) material onto a cellulose-filter (CF) paper separator to address these issues. The novel PBC material demonstrates a hierarchical pore structure, uniform distribution of carbon dots, and rich N, and O functional groups, and an efficient ion transport modulator separator is designed to serve the dual function of promoting ions transfer and suppressing dendrite growth. Owing to the anchoring of PBC on CF and uniform filling of the surface interspace, the PBC modified separator not only greatly facilitates Zn 2+ transport between the fiber-electrolyte interface, but also evenly redistributes the ion transport on the anode interface. As a result, highly reversible Zn plating/stripping is achieved in the symmetric Zn-Zn cell with the separator. Meanwhile, the modified Zn-LiFePO 4 dual ion full battery can retain a specific capacity of 109.4 mAh g −1 after 200 cycles at 1 C with an excellent capacity retention of 86 %. The unique PBC material and facile separator engineering provide a new perspective to designing advanced separators for high-performance aqueous Zn dual ion full battery.

electrochemistry
Mediating Triple Ions Migration Behavior via a Fluorinated Separator Interface toward Highly Reversible Aqueous Zn Batteries

Fang Shen,He Du,Hongyu Qin,Zongwu Wei,Wei Kuang,Nan Hu,Wensong Lv,Zhihui Yi,Dan Huang,Zhengjun Chen,Huibing He

DOI: https://doi.org/10.1002/smll.202305119

IF: 13.3

2023-09-01

Small

Abstract:PVDF modified glass fiber separator (PVDF@GF) is developed to achieve high‐performance aqueous zinc ion batteries (AZIBs) by repelling SO42−, alleviating proton activity and regulating Zn2+ transport and deposition behavior, enabling corrosion‐free and dendrite‐free Zn anodes, as well as long‐term stability in Zn|VOX full batteries. Rampant dendrite growth, electrode passivation and severe corrosion originate from the uncontrolled ions migration behavior of Zn2+, SO42−, and H+, which are largely compromising the aqueous zinc ion batteries (AZIBs) performance. Exploring the ultimate strategy to eliminate all the Zn anode issues is challenging but urgent at present. Herein, a fluorinated separator interface (PVDF@GF) is constructed simply by grafting the polyvinylidene difluoride (PVDF) on the GF surface to realize high‐performance AZIBs. Experimental and theoretical studies reveal that the strong interaction between C─F bonds in the PVDF and Zn2+ ions enables evenly redistributed Zn2+ ions concentration at the electrode interface and accelerates the Zn transportation kinetics, leading to homogeneous and fast Zn deposition. Furthermore, the electronegative separator interface can spontaneously repel the SO42− and anchor H+ ions to alleviate the passivation and corrosion. Accordingly, the Zn|Zn symmetric cell with PVDF@GF harvests a superior cycling stability of 500 h at 10 mAh cm−2, and the Zn|VOX full cell delivers 76.8% capacity retention after 1000 cycles at 2 A g−1. This work offers an all‐round solution and provides new insights for the design of advanced separators with ionic sieve function toward stable and reversible Zn metal anode chemistry.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A high strength, anti-corrosion and sustainable separator for aqueous zinc-based battery by natural bamboo cellulose

Jinzhou Fu,Hanwei Wang,Ping Xiao,Cheng Zeng,Qingfeng Sun,Huiqiao Li

DOI: https://doi.org/10.1016/j.ensm.2022.02.052

IF: 20.4

2022-06-01

Energy Storage Materials

Abstract:Although aqueous zinc-based batteries (AZBs) have aroused extensive research, there are little studies to develop a separator specifically for AZBs, and the widely used Glass Fiber (GF) has poor mechanical strength, which is difficult to meet the requirements of AZBs. Here, a bamboo cellulose membrane (BCM) with natural nano-scale pores is developed by cellulose nanosheets self-assembled, which can be used as a special separator for AZBs. The hierarchical structure formed by cellulose nanosheets endows BCM with a tensile strength up to 81 MPa, 150 times that of GF, able to well block the penetration of zinc dendrites. The rich natural nano-scale pores in BCM can help to facilitate the homogeneous Zn2+ flux at the surface of zinc anode to achieve uniform deposition. Moreover, BCM shows excellent anti-corrosion properties in a wide pH (3.6–13.6) range. The zinc symmetric cell equipped with BCM exhibits much prolonged cycle life, e.g. up to 5000 h and 5000 h (0.5 mA cm−2 0.5 h) in 3 M Zn(CF3SO3)2 electrolyte and 1 M KOH electrolyte, in contrast to 30 h and 4 h for the cell with conventional GF separator. This work demonstrates that developing special separator is very important for the construction of high-performance AZBs.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Hierarchical Porous Separator with Excellent Isotropic Modulus Enabling Homogeneous Zn2+ Flux for Stable Aqueous Zn Battery

Fenglin Zhang,Fanyang Huang,Renzhi Huang,Ning Dong,Shuhong Jiao,Ruiguo Cao,Huilin Pan

DOI: https://doi.org/10.1007/s40843-022-2239-8

2022-01-01

Science China Materials

Abstract:Low-cost, high-safety aqueous Zn-ion batteries show promise for large-scale energy storage, but the unsatisfactory cycling stability of Zn anodes and the lack of a suitable hydrophilic separator for rechargeable aqueous Zn batteries limit their practical applications. In this work, we report a scalable method for the preparation of a homogenous polyvinylidene fluoride-lithium bistrifluoromethanesulfonimide (LiTFSI) (PVDF-Li)-based separator for aqueous Zn batteries. The homogenously mixed LiTFSI salt interrupted the crystalline framework of PVDF with excellent mechanical strength and led to hierarchical pore structures for the rapid and uniform Zn 2+ flux through the separator. Meanwhile, the PVDF-Li separator exhibited excellent wettability toward aqueous Zn electrolytes. With the advanced PVDF-Li separator, the Zn dendrite growth can be suppressed greatly, showing an improved cycle life. The Zn||V 2 O 5 full cell with PVDF-Li separator exhibited a 27% higher initial capacity (324 mA h g −1 ) and considerably better capacity retention than the traditional glass fiber separator due to the uniform reaction on the V 2 O 5 cathode and Zn anode sides. This work provides new insights into the development of high-performance aqueous batteries by regulating the reactions on the cathode and anode through functional separators.
Design and Conformation of Separators for High-performance Aqueous Zinc-Ion Batteries

Ben Niu,Die Luo,Xianru He,Xin Wang

DOI: https://doi.org/10.1002/chem.202402689

2024-08-05

Chemistry

Abstract:Aqueous zinc-ion batteries (AZIBs) are considered promising candidates for large-scale energy storage due to their high safety, low cost, and environmental friendliness. As a core component, separator plays a unique yet oftentimes overlooked role in providing electrochemical stability in AZIBs. This concept focuses on the exquisite structure-property relationship of separators, highlighting three forms of these components and their structural design requirements, i.e., traditional membranes, solid-state electrolytes, and electrode coatings. The mechanism by which separators influence the zinc anode and the cathode is discussed. The article also identifies the challenges and potential future directions for functional separators in the development of high-performance AZIBs.
Wet-laiding hybrid PVA fibers into high electrolyte-uptake zinc-air battery separators: an efficient and cost-saving approach

Kunbin Kuang,Qingshan Li,Yuanna Sun,Najeeb ur rehman Lashari,Qingyi Lv,Zhenhao Zhang,Jiawei Wang,Limeng Yang,Junbo Wang

DOI: https://doi.org/10.1007/s10008-023-05462-5

IF: 2.747

2023-03-24

Journal of Solid State Electrochemistry

Abstract:Zinc-air battery receives continuous attention as an environment-friendly energy storage device, whose potential commercialization is calling for alternative separators, as traditional ones (such as Celgard 5550) often require complex preparation and induce less competitive cost-effectiveness. Moreover, higher electrolyte-uptake is needed for the separators to extend the service life of the batteries. In this paper, separators based on hybrid PVA fibers are prepared through a facile wet-laid nonwoven process within just 25 min. The insoluble PVA fibers work as the skeleton, while the water soluble PVA fibers function as the adhesive in the prepared separators. Microstructure, pore distribution, and electrochemical performance of the wet-laid separators are measured. Results show that the wet-laid separators possess superior electrolyte wettability compared with commercial ones, sufficient porosity, as well as uniform sub-micron pore size distribution. Lower bulk resistance and charge–discharge polarization are achieved. The zinc-air batteries employing the wet-laid separators exhibit comparable cyclic performance with the commercial ones. The key to achieve the better performance of the separators are deemed to be the highly hydrophilic raw materials along with the proper porosity induced by the wet-laid method.Graphical abstract

electrochemistry
Designing Anti‐Swelling Nanocellulose Separators with Stable and Fast Ion Transport Channels for Efficient Aqueous Zinc‐Ion Batteries

Shanchen Yang,YaXin Zhang,Ying Zhang,Jie Deng,Ningxin Chen,Sida Xie,Yue Ma,Zhaohui Wang

DOI: https://doi.org/10.1002/adfm.202304280

IF: 19

2023-06-16

Advanced Functional Materials

Abstract:An anti‐swelling nanocellulose separator is designed to promote homogenized, stable, and fast Zn‐ion transport by Zr4+‐hydrolysate‐induced coating and cross‐linking, which simultaneously homogenizes interfacial electric field distribution and suppress side reactions. Such separator yields dendrite‐free Zn electrode with an excellent zinc plating/stripping cycling lifespan for over 700 h even at 10 mA cm−2. Separators swelling in aqueous electrolytes can cause inhomogeneous ion flux and unregulated dendrite propagation, yet the corresponding phenomenon and mitigation strategy are rarely studied. This article deals with the issue of pore structure variation caused by separator swelling in aqueous zinc‐ion batteries (AZBs) by employing nanocellulose separator as a representative example. A multifunctional separator composed of Zr4+‐hydrolysate‐coated nanocellulose (Zr‐CNF) is developed by in situ hydrolysis of Zr4+, which demonstrates excellent swelling resistance, pore‐structure stability, and percolating porosity due to cross‐linking and hydrogen bond shielding effect. Consequently, the homogeneous Zn‐ion flux, high ionic conductivity, and Zn2+ transfer number are maintained upon cycling. Moreover, the amorphous ZrO containing coating induces a homogeneous directional electric field around the interface, accelerating the Zn2+ influx, reducing the nucleation overpotential, and promoting homogeneous nucleation for Zn deposition. The Zr‐CNF separator enable dendrite‐free Zn anode with high Coulombic efficiency (99.7%) and exceptional cyclability for 680 h under 5 mA cm−2/5 mAh cm−2. The feasibility of the Zr‐CNF separator is verified in PANI/V2O5‐based AZBs and activated carbon‐based Zn‐ion capacitors. This study provides a facile approach to address separator swelling issue, enlightening novel insights into the efficient and sustainable aqueous battery technologies in the future.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Cellulose filter papers derived separator featuring effective ion transferring channels for sodium-ion batteries

Hongyang Zhou,Jin Gu,Yuyi Wei,Weiwei Zhang,Jiancong Kang,Jian-Qiu Huang,Biao Zhang,Chuanshuang Hu,Xiuyi Lin

DOI: https://doi.org/10.1016/j.jpowsour.2023.232649

IF: 9.2

2023-01-08

Journal of Power Sources

Abstract:As a basic component of batteries, separators are proposed to apart the two electrodes while allowing the transport of ionic charge carriers. Cellulose separators have attracted tremendous attention due to their excellent thermal stability and wettability. In this study, we prepare all-cellulose composite (ACC) separators coated with Zn 5 (OH) 8 Cl 2 ·H 2 O (ZHC) particles. The surface of the cellulose filter paper is partially dissolved by the 65% ZnCl 2 solution, forming a tortuous and porous all-cellulose composite membrane. At the same time, ZHC is generated in situ on the surface during the removal of residual ZnCl 2 from the cellulose, which effectively promotes the passage of a sodium ion (Na + ) and substantially improves the cycling performance of the batteries. Density functional theory (DFT) calculations demonstrate that suitable adsorption energy on ZHC is favorable for promoting Na + transport. The corresponding ACC separator exhibits high ionic conductivity (2.75 mS/cm) and Na + transference number (0.82), correspondingly the assembled Na/hard carbon half-cells show an excellent reversible specific capacity (315 mA h/g at 25 mA/g) and cycling stability (the retention is 97.77% after 50 cycles at 50 mA/g), outperforming the glass fiber separator in both sodium-ion half-cell and full-cell.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Cotton-derived cellulose film as a dendrite-inhibiting separator to stabilize the zinc metal anode of aqueous zinc ion batteries

Weijun Zhou,Minfeng Chen,Qinghua Tian,Jizhang Chen,Xinwu Xu,Ching-Ping Wong

DOI: https://doi.org/10.1016/j.ensm.2021.10.002

IF: 20.4

2022-01-01

Energy Storage Materials

Abstract:Benefiting from high safety, low cost, and competitive energy density, aqueous zinc-ion batteries (AZIBs) have become a very promising technique for grid-scale energy storage. However, the life span of AZIBs is severely influenced by the uncontrolled zinc dendritic growth and undesirable side reactions. To address this issue, this work employs cotton-derived cellulose film prepared by a facile filtration method as the separator for AZIBs. The obtained separator offers dense and uniform nanopores, abundant hydroxyl groups, excellent mechanical properties (29.2 MPa in strength and 4.16 GPa in modulus), and large ionic conductivity (56.95 mS cm–1). These properties enable this separator to increase the zinc ion transfer number, lower the desolvation barrier of hydrated zinc ions, reduce the zinc nucleation overpotential, and accelerate the zinc deposition kinetics, in comparison with the commonly used glass fiber separator. Therefore, the cellulose film separator can effectively inhibit zinc dendrites and harmful side reactions. Impressively, the Zn//Zn symmetric cell with this separator remains stable at a cumulative zinc plating capacity of 1,000 mAh cm−2 and can endure ultra-large areal capacity of 20 mAh cm−2. The assembled Zn-MnO2 battery also achieves significantly improved rate capability and cyclability compared to those using other separators. This study provides new insights into designing reliable, efficient, and cost-effective separators of electrochemical energy storage devices.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
A low-cost separator enables a highly stable zinc anode by accelerating the de-solvation effect

Jin Cao,Dongdong Zhang,Rungroj Chanajaree,Ding Luo,Xuelin Yang,Xinyu Zhang,Jiaqian Qin

DOI: https://doi.org/10.1016/j.cej.2023.147980

IF: 15.1

2023-12-16

Chemical Engineering Journal

Abstract:Aqueous zinc-ion batteries (ZIBs) are promising as the next-generation energy storage system due to their inherent safety and low cost, but challenges relating to H 2 O-induced side reactions and dendrite growth of the zinc anode are restricting its practical application. Herein, a low-cost separator (CNF + LMS) composed of cellulose nanofibers (CNF) and lithium magnesium silicate (LMS) has been prepared to eliminate the obstacles through accelerating the de-solvation process and facilitating the homogeneous zinc deposition. As verified by the experimental results and theoretical calculations, the battery with CNF + LMS separator shows a lower de-solvation activation energy (44.13 kJ mol −1 ) and faster de-solvation kinetics due to the superior water adsorption capacity of LMS molecules. Additionally, the CNF + LMS separator also presents superior wettability, large tensile strength, and excellent ionic conductivity, thus enabling dendrite‐free zinc deposition, long cycling life (1000 h at 1 mA cm −2 ; 500 h at 5 mA cm −2 ), superior Coulombic efficiency (99.12 % at 1 mA cm −2 ). The CNF + LMS separator, which cost as low as ¥ 6.36 per m 2 , can also be utilized in Zn||VO 2 full battery and pouch cell to boost their electrochemical performance. Considering the facile preparation, low cost and practical feasibility, the CNF + LMS separator offers a new opportunity for developing practical ZIBs.

engineering, chemical, environmental
Regulating zinc deposition behaviors by using a functional PANI modification layer on a separator for high performance aqueous zinc-ion batteries

Fangfang Wu,Fukai Du,Pengchao Ruan,Gangfeng Cai,Ye Chen,Xinyu Yin,Lu Ma,Ruilian Yin,Wenhui Shi,Wenxian Liu,Jiang Zhou,Xiehong Cao

DOI: https://doi.org/10.1039/d3ta01344h

IF: 11.9

2023-05-11

Journal of Materials Chemistry A

Abstract:Aqueous zinc-ion batteries (AZIBs) are promising energy storage devices due to their high safety, abundant zinc reserves, high theoretical capacity and low redox potential. Glass fiber (GF) has been widely used as a separator in AZIBs; however, the strong affinity to zinc ions of GF easily induces the growth of zinc dendrites towards the separator and results in a short circuit of the battery. Herein, we propose a new strategy for regulating zinc deposition behaviors by in situ polyaniline (PANI) modification on a commercial GF separator (GF/PANI). The theoretical and experimental results indicate that a PANI modification layer weakens zincophilicity force, homogenizes the surface electric field distribution and induces uniform plating/stripping of zinc ions, and thus, the reversibility of the zinc anode is significantly improved. Typically, a Zn‖Zn symmetric battery with a GF/PANI-600 separator can sustain a longer cycle up to 3000 h at 1.0 mA cm −2 with 1.0 mA h cm −2 , far exceeding than that with a GF separator (70 h). Additionally, a Zn‖MnO 2 full battery with a GF/PANI-600 separator also delivers a higher capacity retention rate of 89.5% after 300 cycles at 0.5 A g −1 (50.7% that of the Zn|GF|MnO 2 battery). This work provides a new insight into the design of durable AZIBs from the viewpoint of the modification of the separator.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Synergistically regulating the separator pore structure and surface property toward dendrite-free and high-performance aqueous zinc-ion batteries

Yaxin Zhang,Shanchen Yang,Ying-Jie Zhu,Dandan Li,Long Cheng,Heng Li,Zhaohui Wang

DOI: https://doi.org/10.1016/j.jcis.2023.11.132

IF: 9.9

2023-11-28

Journal of Colloid and Interface Science

Abstract:As an emerging electrochemical device , aqueous zinc-ion batteries (ZIBs) present promising potential in safe and large-scale energy storage. However, the large pores of commercial glass fiber (GF) separators result in uneven Zn 2+ ion flux , leading to severe dendrite growth issues of Zn metal anodes. Herein, we integrated a multifunctional layer on the GF separator that can synergistically regulate the pore feature and surface property of commercial GF separators. Such modification layer, composed of nanocellulose and SiO 2 nanoparticles, exhibited uniform nanoporous structure and abundant negatively charged polar functional groups. These features allow regulating the distribution of Zn 2+ ions at the separator-anode interface, facilitating stable and uniform Zn nucleation and growth. Moreover, the electrostatic interaction between the negatively charged functional groups and Zn 2+ ions enhanced the Zn 2+ ion transport kinetics, preventing the Zn dendrites formation and adverse reactions. Consequently, the modified electrolyte-filled GF separator showed an increased Zn 2+ ion transference number of 0.65. The symmetric Zn//Zn batteries utilizing such a separator achieved an impressive cycling life of 500 h at a high current density/capacity of 10 mA cm −2 /4 mAh cm −2 , nearly nine times longer than the battery using the unmodified GF separator (<55 h). The superior electrochemical performance was verified in both Zn//AC and Zn//LiMn 2 O 4 full battery evaluations. This work presents a novel synergistic modification strategy for developing advanced separators for aqueous ZIBs.

chemistry, physical
Zwitterion Modified Polyacrylonitrile Fiber Separator for Long‐Life Zinc‐Ion Batteries

Lukuan Cheng,Wenzheng Li,Mengrui Li,Shiqiang Zhou,Jingyi Yang,Wen Ren,Lina Chen,Yan Huang,Suzhu Yu,Jun Wei

DOI: https://doi.org/10.1002/adfm.202408863

IF: 19

2024-10-02

Advanced Functional Materials

Abstract:A polyacrylonitrile (PAN) nanofiber separator modified by zwitterion surfactant (Sulfobetaine methacrylate, SBMA) through electrospinning technology is designed. The functional PAN‐based separator has very uniform fibers and can regulate zinc ion transportation. It demonstrates excellent cycle performance at high current density and satisfactory capacity retention than glass fiber in full zinc‐ion batteries (ZIBs). The major challenges of aqueous zinc‐ion batteries (ZIBs) are the dendrite formation and the passivation of zinc metal anode, which restrict their practical applications. Herein, polyacrylonitrile (PAN) and zwitterionic surfactant (Sulfobetaine methacrylate, SBMA) are combined as a precursor to design a modified PAN nanofiber separator by electrospinning. SBMA with sulfonate group [SO3−] can alter the physical property of the precursor solution and electrostatic field during the electrospinning process. Besides, it can regulate the zinc ions crossing and homogenize the electric field by minimizing the zinc ion concentration polarization on the zinc foil surface due to the polar group. As a result, Zn symmetric cells with PAN@SBMA separators show long‐term stability (up to 1700 h), which outdistances the cell with GF‐D (only up to 50 h) under current density at 1 mA cm−2. Meanwhile, the Zn//PAN@SBMA//NH4V4O10 full cells have high specific capacity (236 mAh g−1) and excellent long‐term durability with 84.2% capacity retention after 2000 cycles at 5 A g−1. This work illustrates an easy and effective way to design a high ion transference number and functional PAN‐based separator for regulating Zn2+ deposition for the development of high‐performance ZIBs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Regulating zinc deposition for dendrite-free aqueous zinc-ion batteries: A zincophilic chitosan polyelectrolyte hydrogel modified glass fiber separator

Jing Guo,Yongjian Wang,Suhong Li,Yaosheng Meng,Yanyan Qin,Lintao Jiang,Hao Huang,Lingdi Shen

DOI: https://doi.org/10.1016/j.jallcom.2023.171708

IF: 6.2

2023-08-23

Journal of Alloys and Compounds

Abstract:Rechargeable aqueous zinc-ion batteries (AZIBs) are a promising low-cost, safe, and eco-friendly alternative to lithium-ion batteries. However, the inhomogeneous deposition of metallic zinc on the anode and severe side reactions have hindered their large-scale application. In this study, we developed a zincophilic separator by coating and gelating natural chitosan (CS) onto one side of conventional glass fiber (GF) separators (named CS-GF separator), which regulates zinc anode performance. The uniformly distributed CS hydrogel layer on GF anchors numerous water molecules and H + in the electrolyte, inhibiting their activity and restraining side reactions. The functional groups of the CS-GF separator interact with zinc ions, promoting their diffusion and transfer kinetics and alleviating dendritic growth during zinc plating/stripping. Furthermore, the CS hydrogel layer improves the flatness of the GF separator and homogenizes its pore size distribution, guiding the uniform transport and deposition of zinc ions. The Zn||Zn symmetrical cells using CS-GF separators possess superior long-life stability (1000 h at 2 mA cm −2 /1 mA h cm −2 ), and high Coulombic efficiency of 99.6 %. Additionally, the rate capacity and cyclability of the Zn||NaV 3 O 8 full cells with CS-GF separators are significantly improved. Therefore, the low-cost and scalable CS-GF separator holds tremendous great potential for practical application in AZIBs.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Modulation of zinc deposition behaviour by electrostatically spun PAN-ZnTFSI fibre layer on separator for aqueous zinc ion batteries

Rui-han Li,Bin-bin Sui,Peng-fei Wang,Zhe Gong,Yu-han Wu,Yu-hang Zhang,Li-na Zhao,Jun-jie Tang,Fa-nian Shi

DOI: https://doi.org/10.1016/j.jallcom.2024.174899

IF: 6.2

2024-05-23

Journal of Alloys and Compounds

Abstract:Aqueous zinc ion batteries (AZIBs) are well-suited for current energy storage technologies due to their high safety and low cost. However, battery failures resulting from dendrites and side reactions restrict their widespread application. Here, we designed a polyacrylonitrile (PAN) -zinc trifluoromethanesulfonate (ZnTFSI) nanofibre synergistic glass fibre (PZ-GF) to modulate the interfacial deposition kinetics. The effective coordination of numerous CN functional groups within PZ, in conjunction with Zn 2+ , results in the homogeneous dispersion of the electric field across the electrode, which promotes the uniform deposition of Zn 2+ on the zinc anode and thus significantly inhibits the rapid growth of zinc dendrites. ZnTFSI is hydrophilic and has strong hydrogen bonding interactions with the H 2 O molecule so that the separator can be used as a molecular sieve to regulate the flux of H 2 O, promote the desolvation of hydrated zinc ions, and inhibit side reactions.Tests of the initial nucleation overpotential of the symmetric battery and calculation of the activation energy reflect that PZ-GF has a smaller nucleation energy barrier and enhanced kinetic effect. And the zinc symmetric battery with PZ-GF film shows an ultra-long cycle stability of 1200 cycles with a capacity retention of 75% even at 0.5 A g -1 for the Zn//VO 2 full cells.

materials science, multidisciplinary,metallurgy & metallurgical engineering,chemistry, physical
Functionalized Separator Strategies toward Advanced Aqueous Zinc‐Ion Batteries

Yu Zong,Hongwei He,Yizhen Wang,Menghua Wu,Xiaochuan Ren,Zhongchao Bai,Nana Wang,Xin Ning,Shi Xue Dou

DOI: https://doi.org/10.1002/aenm.202300403

IF: 27.8

2023-04-09

Advanced Energy Materials

Abstract:Functionalized separators are employed in improving the performance of zinc‐ion batteries (ZIBs). This Review presents new insights into the contribution of functionalized separators in enhancing cathode and anode performance and reducing battery costs. This provides enlightening direction for the rational design of high‐performance ZIBs. Aqueous zinc‐ion batteries (ZIBs) enjoy a good reputation for being safe, affordable to produce, and ecologically friendly due to the use of water‐based electrolytes. The main factors restricting the development of ZIBs, however, are the negative effects of dendrite deposition on the zinc anode and the dissolution of common cathodes such as Mn and V‐based cathodes. Various techniques have been used to address these issues, including regulating the electrolyte concentration or solvation structure, developing a coating or current collector to lessen anode dendrite growth, and improving the structural stability of the cathode. Recently, functionalized separator strategies have gained popularity as effective ways to improve ZIB performance. The use of a functionalized separator is also a practical technique to save costs and increase the volumetric energy density of the battery by substituting a functionalized separator for the usual thick and expensive glass fiber separator. The development of functionalized separators in ZIBs is the subject of ongoing research, and this work presents the most recent findings in a systematic manner, focusing on both the effects and the methods to prepare or modify them. Finally, a brief explanation of the constraints and future potential of current functionalized separator development is provided.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels

Guest Editors' Introduction - Special Issue on Supporting Multiple Criteria Decisions

Functionalized Non-Glass Fiber Nanoporous Separator for High-Performance Aqueous Zinc Ion Batteries

Enhancing aqueous zinc-ion energy storage performance with ion-mediating carbon quantum dots-modified separators regulating zinc deposition behavior

Advanced Filter Membrane Separator for Aqueous Zinc‐Ion Batteries

PBC@Cellulose-Filter Paper Separator Design with Efficient Ion Transport Properties Toward Stabilized Zinc-ion Battery

Mediating Triple Ions Migration Behavior via a Fluorinated Separator Interface toward Highly Reversible Aqueous Zn Batteries

A high strength, anti-corrosion and sustainable separator for aqueous zinc-based battery by natural bamboo cellulose

Hierarchical Porous Separator with Excellent Isotropic Modulus Enabling Homogeneous Zn2+ Flux for Stable Aqueous Zn Battery

Design and Conformation of Separators for High-performance Aqueous Zinc-Ion Batteries

Wet-laiding hybrid PVA fibers into high electrolyte-uptake zinc-air battery separators: an efficient and cost-saving approach

Designing Anti‐Swelling Nanocellulose Separators with Stable and Fast Ion Transport Channels for Efficient Aqueous Zinc‐Ion Batteries

Cellulose filter papers derived separator featuring effective ion transferring channels for sodium-ion batteries

Cotton-derived cellulose film as a dendrite-inhibiting separator to stabilize the zinc metal anode of aqueous zinc ion batteries

A low-cost separator enables a highly stable zinc anode by accelerating the de-solvation effect

Regulating zinc deposition behaviors by using a functional PANI modification layer on a separator for high performance aqueous zinc-ion batteries

Synergistically regulating the separator pore structure and surface property toward dendrite-free and high-performance aqueous zinc-ion batteries

Zwitterion Modified Polyacrylonitrile Fiber Separator for Long‐Life Zinc‐Ion Batteries

Regulating zinc deposition for dendrite-free aqueous zinc-ion batteries: A zincophilic chitosan polyelectrolyte hydrogel modified glass fiber separator

Modulation of zinc deposition behaviour by electrostatically spun PAN-ZnTFSI fibre layer on separator for aqueous zinc ion batteries

Functionalized Separator Strategies toward Advanced Aqueous Zinc‐Ion Batteries