Abstract:This study optimizes electrolyte pH to extend cycling by influencing two‐electron MnO2/Mn2+ reaction for high voltage operation. It integrates a carbon‐based current collector with a high density of structural defects for enhanced cycling. With impressive performance and minimal decay over 400 cycles in a flooded stack‐type cell architecture, these batteries present a promising practical solution for large‐scale energy storage applications. Zn–MnO2 batteries offer cost‐effective, eco‐friendly, and efficient solutions for large‐scale energy storage applications. However, challenges, like irreversible cathode reactions, prolonged cyclability, and electrolyte stability during high‐voltage operations limit their broader application. This study provides insight into the charge–discharge process through in situ deposition of active β‐MnO2 nanoflakes on a carbon‐based current collector. The study elucidates the effect of pH and electrolyte concentration on chemical conversion reactions with Zn, in particular focus on their impact on the two‐electron MnO2/Mn2+ reaction crucial for high voltage operation. The electrolyte, characterized by being relatively lean in Mn2+ and with a targeted low pH, enables extended cycling. This research achieves greater cycling durability by integrating a carbon‐based cathode current collector with high density of structural defects in combination with cell architectures suitable for large‐scale energy storage. A flooded stack‐type Zn–MnO2 battery prototype employing the optimized electrolyte demonstrates a high discharge voltage (≈2 V) at a substantial discharge current rate of 10 mA cm−2. The battery exhibits an impressive areal capacity of ≈2 mAh cm−2, maintaining ≈100% capacity retention over 400 cycles. This research establishes a promising practical, and cost‐effective cathode‐free design for Zn–MnO2 batteries, that minimizes additional processing and assembly costs.

ZnO Additive Boosts Charging Speed and Cycling Stability of Electrolytic Zn-Mn Batteries

Valence Engineering via In Situ Carbon Reduction on Octahedron Sites Mn3O4 for Ultra‐Long Cycle Life Aqueous Zn‐Ion Battery

Optimized cyclic durability of α-MnO2 nanosheets for zinc ion storage through synergistic effect of lithium ions pre-embedding and electrolyte additives

A novel Mn2+-additive free Zn/MnO2 battery with 2.4 V voltage window and enhanced stability

Boosting Zn anode reversibility via electrolyte solvation structure mediation by ethylene glycol monomethyl ether additive

Acidity‐Aided Surface Modification Strategy to Enhance In Situ MnO2 Deposition for High Performance Zn‐MnO2 Battery Prototypes

Improved Mn4+/Mn2+ Contribution in High‐Voltage Zn–MnO2 Batteries Enabled by an Al3+‐Ion Electrolyte

Boosting Aqueous Zn/MnO 2 Batteries via a Synergy of Edge/Defect-Rich Cathode and Dendrite-Free Anode

Enhancing the Efficiency of Two-Electron Zinc-Manganese Batteries Enabled by Glycine Complexation of Manganese Ions and Compatibility with Zinc Anodes

Constructing Ionic Self‐Concentrated Electrolyte via Introducing Montmorillonite Toward High‐Performance Aqueous Zn−MnO2 Batteries

Modification of Zinc Anodes by In Situ ZnO Coating for High-Performance Aqueous Zinc-Ion Batteries

Highly improved aqueous Zn‖LiMn2O4 hybrid-ion batteries using poly(ethylene glycol) and manganese sulfate as electrolyte additives

Zinc ion stabilized MnO2 nanospheres for high capacity and long lifespan aqueous zinc-ion batteries

Atomic engineering promoted electrooxidation kinetics of manganese-based cathode for stable aqueous zinc-ion batteries

Zinc ion stabilized MnO<sub>2</sub> nanospheres for high capacity and long lifespan aqueous zinc-ion batteries

Facile electrode additive stabilizes structure of electrolytic MnO2 for mild aqueous rechargeable zinc-ion battery

Suppressing Rampant and Vertical Deposition of Cathode Intermediate Product via Ph Regulation Towards Large‐Capacity and High‐Durability Zn//MnO2 Batteries

Self-Recovery Chemistry and Cobalt-Catalyzed Electrochemical Deposition of Cathode for Boosting Performance of Aqueous Zinc-Ion Batteries

The function of Mn2+ additive in aqueous electrolyte for Zn/δ-MnO2 battery

Boosting the Cycling Stability of Aqueous Zinc-Ion Batteries through Nanofibrous Coating of a Bead-like MnOx Cathode

Unravelling the Mechanism of Rechargeable Aqueous Zn-MnO2 Batteries: Implementation of Charging Process by Electrodeposition of MnO2