Mineral and vitamin deficiencies can accelerate the mitochondrial decay of aging.

B. Ames,H. Atamna,D. Killilea

DOI: https://doi.org/10.1016/J.MAM.2005.07.007

IF: 16.337

2005-08-01

Molecular Aspects of Medicine

Abstract:

What problem does this paper attempt to address?

Flexible, Chemically Bonded Bi-PVA–PVP Composite for Enhanced Diagnostic X-ray Shielding Applications

Mishra, Deepti

DOI: https://doi.org/10.1007/s10904-023-02662-4

IF: 3.518

2023-05-03

Journal of Inorganic and Organometallic Polymers and Materials

Abstract:The motto of this work is to develop a flexible, lightweight metal-polymer composite for shielding diagnostic X-rays (40–140 kV) as an alternative to toxic lead/lead composite for making aprons, skirts, gonad shields, thyroid shield, etc. as they are effective in shielding ionizing radiations. But the uniform distribution of filler in the matrix is a major challenge. To overcome this drawback we have incorporated Bi 2 O 3 in polyvinyl alcohol-polyvinyl pyrrolidone (PVA–PVP) blend by dissolving 0–5 gm of Bi 2 O 3 in 4 molar HCl rather than dispersing nano/microparticles. More than 5 gm of Bi 2 O 3 is not soluble in 4 molar HCl. Therefore, it is chosen as an optimum composition i.e. PB5. Bismuth oxide was found to react with HCl and form an amorphous BiOCl phase as validated by XRD and FT-IR. This amorphous phase was noticed to crystallize when sintered at 410 °C as confirmed through XRD. The X-ray attenuation characteristics were studied against accelerating voltage of 50-140 kV. The 5.5 mm thick PB5 sample shows the lead equivalent of 0.5 mm at 100 kV. It shows uniform attenuation throughout the matrix due to the uniform distribution of Bi as confirmed through EDX mapping. The PB5 composite has sufficient tensile strength, which is suitable for making radiation shielding apparel.

polymer science
Study on Lead Iodide-Polyvinyl Alcohol Polymer Composites as an X-ray Shielding Material

Priti Rana, Sunil Chaudhary, Kulvinder Singh

DOI: https://doi.org/10.52783/cienceng.v11i1.383

2023-06-12

Proceeding International Conference on Science and Engineering

Abstract:Now-a-days, the importance of x-rays is increasing in fields like medical diagnosis, cancer treatment, nuclear fission energy, x-ray scanning machines for airport and railway station entry and in treatment of food for preservation. But the exposure to x-rays will be harmful for the users of such facilities. Doctors, operators and researchers are required to be protected from the high energy ionizing radiations like x-rays and gamma rays.So to protect them, proper shielding is necessary. Numbers of shielding materials are used at workplaces of high radiation regions at nuclear installations. Most commonly used, shielding material is lead glasses due to its high atomic number (Z=82). This insures high absorption by the shielding material. Recently light polymer sheets of polyvinyl alcohol (PVA) are replacing heavy glass sheets. To prepare lead polymer sheets lead compounds are mixed with polymer. In the present work, we selected to mix lead iodide in polymer composite to analyze its X-ray shielding capability. Polymer composites sheets of lead iodide with PVA were prepared by solution method. These sheets of Polymer composites were subjected to soft x-rays (30 KeV- 60KeV) switching studies at room temperature. These sheets found to provide the x-ray absorption69.6% higher than conventional shielding material like lead and are light in weight too.
Multifiller-based polymer composites for shielding high energy ionising radiation

Madalakote Rajanna Ambika,Sherry S Kuttukaran,Ningaiah Nagaiah,Raveendra Melavanki,Shivappa K Shashi Kumar,Santosh Kumar Suman

DOI: https://doi.org/10.1093/rpd/ncae010

2024-07-17

Abstract:Polydimethyl silicone rubber-based polymer composites filled with molybdenum and bismuth were fabricated using simple open mold cast technique. The physical and chemical structure and gamma shielding parameters like attenuation coefficient, half-value layer (HVL) thickness and relaxation length have been investigated for the said novel materials using X-ray diffraction (XRD), Fourier transform Infrared spectroscopy (FTIR) and gamma ray spectrometer. XRD study reveals the crystalline nature of the composites. It is evident from FTIR studies that there is no chemical interaction between the polymer matrix and filler particles. The results of attenuation studies reveal that the linear attenuation coefficient increases with addition of Bi and Mo and is found to be 0.653, 1.341 and 1.017, 1.793 and 0.102, 0.152 cm-1 for 1MMB and 2MMB polymer composites at 80, 356 and 662 keV gamma rays, respectively. The HVL thickness of the materials is found to be 1.06, 0.51 and 0.68, 0.38 and 6.73, 4.532 cm for 1MMB (20Mo + 10Bi phr) and 2MMB (40Mo + 20Bi phr) at these energies, respectively. The mass attenuation coefficient of the novel composites 1MMB and 2MMB is found to be higher than the conventional materials like lead and barite for 356 keV gamma rays. In addition, the material is found to be light weight and flexible enabling to be molded in required forms, thus being a substitute for the material lead that is known to be heavy and toxic by nature.
Fabrication, Structural Characterization, and Photon Attenuation Efficiency Investigation of Polymer-Based Composites

Sitah F. Alanazi,Norah M. Alotaibi,Mohammed Alsuhybani,Nassar Alnassar,Fahad I. Almasoud,Mansour Almurayshid

DOI: https://doi.org/10.3390/polym16091212

IF: 5

2024-04-27

Polymers

Abstract:Experiments have assessed various polymer composites for radiation shielding in diverse applications. These composites are lighter and non-toxic when compared to lead (Pb), making them particularly effective in diagnostic imaging for shielding against low-energy photons. This study demonstrates the fabrication of four composites by combining a base material, specifically a high-density polyethylene (HDPE) polymer, with 10% and 20% silicon (Si) and silicon carbide (SiC), respectively. Additionally, 5% molybdenum (Mo) was incorporated into the composites as a heavy metal element. The composites obtained were fabricated into 20 disks with a uniform thickness of 2 mm each. Discs were exposed to radiation from a low-energy X-ray source (32.5–64.5 keV). The chemical and physical properties of composites were assessed. The shielding ability of samples was evaluated by determining the linear and mass attenuation coefficients (μ and μm), radiation protection efficiency (RPE), half-value layer (HVL), and mean free path (MFP). According to our findings, supplementing HDPE with additives improved the attenuation of beams. The μm values showed that composite X-ray shielding characteristics were enhanced with filler concentration for both Si and SiC. Polymer composites with micro-molecule fillers shelter X-rays better than polymers, especially at low energy. The HVL and MFB values of the filler are lower than those of the pure HDPE sample, indicating that less thickness is needed to shield at the appropriate energy. HC-20 blocked 92% of the incident beam at 32.5 keV. This study found that increasing the composite sample thickness or polymer filler percentage could shield against low-energy radiation.

polymer science
Tungsten-based polymer composite, a new lead-free material for efficient shielding of coupled neutron-gamma radiation fields: A FLUKA simulation study

Avijit Das,Aditi Ray,Tej Singh

DOI: https://doi.org/10.1088/1402-4896/acfa3e

2023-09-17

Physica Scripta

Abstract:Metal-based polymer composites, a new category of advanced materials, are advantageous for effective protection of radiation field. Recent report of fabrication of tungsten (W)-Poly methyl methacrylate (PMMA) composite microcellular foams with enhanced mechanical strength properties opens up the possibility of its use in radiation attenuation. Objective of this theoretical study is to assess the efficacy of W-based polymer composite, a new lead-free shielding material for attenuating coupled neutron-gamma radiations. Current paper utilizes open-source Monte Carlo code FLUKA to evaluate shielding efficiency of PMMA composites reinforced with varying concentration W particles. Study shows that, adding even 20 vol% of W particles can significantly improve radiation shielding ability of PMMA. Performance of analogous composition Pb-based polymer composite is also examined to demonstrate its inadequacy in radiation protection compared to W-based composite. Study reveals an interesting fact that for any shield dimension, total radiation dose follows an initial descending trend with increase in heavy metal (W/Pb) proportion up to certain optimum value where dose becomes minimum, beyond that dose increases. Optimum heavy metal concentrations are found to be 70 vol% and 30 vol% for W and Pb respectively, with minimum dose for Pb shield being two orders of higher magnitude. Study is further extended to investigate shielding efficiency of conventional double-layer laminates employing W and PMMA in both high-Z/low-Z and low-Z/high-Z configurations as well as optimum concentration of W-PMMA composite and PMMA. It is shown that among all the potential designs, newly introduced composite-based double-layer shield performs best in terms of volumetric dose while single-layer optimized composite shield offers least specific dose.

physics, multidisciplinary
X-Ray and γ-Ray Shielding Efficiency of Polymer Composites: Choice of Fillers, Effect of Loading and Filler Size, Photon Energy and Multifunctionality

Srilakshmi Prabhu,S. G Bubbly,Shivappa B. Gudennavar

DOI: https://doi.org/10.1080/15583724.2022.2067867

2022-05-05

Polymer Reviews

Abstract:Use of X-rays and γ-rays have become inevitable in medical sectors like radiology, interventional cardiology and diagnostic imaging, radiation physics laboratories, nuclear reactors and accelerator facilities. As radiation exposures above permitted levels pose potential risk to personnel working in close proximity to these facilities, protective measures aimed at reducing the exposure for safeguarding against harmful effects of ionizing radiations are essential. Traditionally, lead and lead based materials have been used as efficient radiation shielding materials owing to the high atomic number and high density of lead. Presently, use of lead is discouraged due to its heavy weight, toxicity and long-term effects on the environment. Consequently, the last two decades have seen research on light weight and cost-effective polymer composites with appropriate additives, having good workability, high specific strength, thermo-chemical stability and radiation shielding efficacy, gaining momentum. This article gives an overview of the state-of-the-art polymer composites reinforced with different fillers studied for their use as effective radiation shields. Here, we summarize the recent advancement and current trends in polymer composites-based radiation shields highlighting the different approaches adopted, choice of polymer/fillers, shielding effectiveness in terms of either linear and/or mass attenuation coefficients, for those who venture into radiation research and development.

polymer science
Superiority of micro/nano tungsten carbide reinforced poly-methyl methacrylate composites in shielding gamma radiation

Ahmed M. El-Khatib,Mahmoud T. Alabsy,Alaa Y. El-Khatib,Mirvat F. Dib,Mahmoud I. Abbas

DOI: https://doi.org/10.1016/j.net.2024.05.013

IF: 2.817

2024-05-24

Nuclear Engineering and Technology

Abstract:This research aimed to develop lead-free polymer composites based on poly-methyl methacrylate (PMMA) and embedded with tungsten carbide (WC) micro and nanoparticles for use in radiation protection applications. PMMA was filled with 20 %, 40 %, and 60 % by weight of WC micro- and nanoparticles. The shielding features of the proposed polymer mixtures were evaluated at different radioactive sources of different energies using the HPGe detector. The results revealed that the investigated composites containing micro and nano-structured WC particles showed superior radiation shielding at 81 keV due to the K-edge of the W element occurring at 69.5 keV. The findings also demonstrated that composites loaded with WC nanoparticles were more effective in shielding gamma radiation than those loaded with WC microparticles, even at the same filler wt.%. Furthermore, the sample containing 60 % by weight of nano-WC, coded as P-60nWC, had superior shielding performance than other polymer-based composites reported in the literature. Thus, the proposed nano-WC/PMMA composites can be effectively employed in radiation facilities as alternative environmentally and lead-free radiation shielding materials to protect people and the environment from the harmful risks of gamma radiation.

nuclear science & technology
Flexible, chemically bonded bismuth/tungsten‐based polyvinyl alcohol‐polyvinyl pyrrolidone composite for gamma and neutron shielding application

Abhijit Bijanu,Rahul Arya,Gaurav Rajak,V. Sorna Gowri,Rahitashya Shil,Kaushik Banerjee,Sarmishtha Bhattacharyya,Supriya Mukhopadhyay,Sujoy Chatterjee,Raman Ravishankar,Shabi Thankaraj Salammal,Deepti Mishra

DOI: https://doi.org/10.1002/app.55435

IF: 3

2024-03-19

Journal of Applied Polymer Science

Abstract:W/Bi‐PVA‐PVP based composites for gamma‐ray and neutron shielding application. In this paper, the gamma and neutron shielding behavior of chemically bonded high atomic number (Z), tungsten trioxide‐polyvinyl alcohol‐polyvinylpyrrolidone (PW), and bismuth oxide‐polyvinyl alcohol‐polyvinylpyrrolidone (PB) composites were reported at varying thickness. The PW and PB composites were prepared through the dissolution technique rather than the commonly used dispersion technique. The gamma and neutron attenuation characteristics of the composites were studied using 22Na (0.511 and 1.274 MeV energy) and 252Cf (0–10 MeV energy) sources, respectively. The half value layer of PW and PB composite was found to be 61.22 ± 0.914 mm and 48.29 ± 1.52 mm and the linear attenuation coefficient was found to be 0.115 and 0.144 cm−1 at 0.511 MeV, respectively. Further, the experimental gamma‐ray attenuation results were validated theoretically using Phy‐X software and found to be well in agreement with the experimental data. Both the composites also showed similar neutron shielding behavior when compared to the commercially used high‐density polyethylene (HDPE). The developed composites possess good mechanical properties as they did not show any cracks or wrinkles after undergoing 5400 bending cycles during the flex test, showing their high durability of flexibility. Thus, these composites are found to be suitable for shielding both, the gamma‐rays and neutrons.

polymer science
Attenuation properties of poly methyl methacrylate reinforced with micro/nano ZrO2 as gamma-ray shields

Mahmoud T. Alabsy,Mahmoud I. Abbas,Alaa Y. El-khatib,Ahmed M. El-Khatib

DOI: https://doi.org/10.1038/s41598-024-51551-4

IF: 4.6

2024-01-14

Scientific Reports

Abstract:This research aimed to examine the radiation shielding properties of unique polymer composites for medical and non-medical applications. For this purpose, polymer composites, based on poly methyl methacrylate (PMMA) as a matrix, were prepared and reinforced with micro- and nanoparticles of ZrO 2 fillers at a loading of 15%, 30%, and 45% by weight. Using the high purity germanium (HPGe) detector, the suggested polymer composites' shielding characteristics were assessed for various radioactive sources. The experimental values of the mass attenuation coefficients (MAC) of the produced composites agreed closely with those obtained theoretically from the XCOM database. Different shielding parameters were estimated at a broad range of photon energies, including the linear attenuation coefficient (μ), tenth value layer (TVL), half value layer (HVL), mean free path (MFP), effective electron density (N eff ), effective atomic number (Z eff ), and equivalent atomic number (Z eq ), as well as exposure buildup factor (EBF) and energy absorption buildup factor (EABF) to provide more shielding information about the penetration of γ-rays into the chosen composites. The results showed that increasing the content of micro and nano ZrO 2 particles in the PMMA matrix increases μ values and decreases HVL, TVL, and MFP values. P-45nZ sample with 45 wt% of ZrO 2 nanoparticles had the highest μ values, which varied between 2.6546 and 0.0991 cm −1 as γ-ray photon energy increased from 0.0595 to 1.408 MeV, respectively. Furthermore, the highest relative increase rate in μ values between nano and micro composites was 17.84%, achieved for the P-45nZ sample at 59.53 keV. These findings demonstrated that ZrO 2 nanoparticles shield radiation more effectively than micro ZrO 2 even at the same photon energy and filler wt%. Thus, the proposed nano ZrO 2 /PMMA composites can be used as effective shielding materials to lessen the transmitted radiation dose in radiation facilities.

multidisciplinary sciences
Development of New Lead-Free Composite Materials as Potential Radiation Shields

Mansour Almurayshid,Yousif Alssalim,Farouk Aksouh,Rashed Almsalam,Meshari ALQahtani,M. I. Sayyed,Fahad Almasoud

DOI: https://doi.org/10.3390/ma14174957

IF: 3.4

2021-08-30

Materials

Abstract:Utilizing a polymer-based radiation shield offers lightweight, low cost, non-toxic compared to lead and solution for eliminating generated secondary neutrons. Incorporating silicon (i.e., one of the most abundant elements) in new applications, such as shielding, would have an impact on the economy and industry. In this study, seven potential shielding materials, composed of silicon, silicon carbide, and boron carbide embedded ethylene vinyl acetate (EVA) copolymers, are proposed. The shielding performance of these composite materials, including the attenuation coefficients (μ), the mass attenuation coefficients (μm), the half value layer (HVL), the mean free path (MFP), and the radiation protection efficiency (RPE) were examined using photon beams. Measured μm were verified against the calculated values. The averaged agreement was within ±7.4% between the experimental measurements and the theoretical calculation results. The HVL and MFP measured values for the polymer composites were lower than that for the pure EVA polymer, indicating the fillers in the polymers enhanced the shielding performance. The EVA + SiC (30%) and EVA + Si (15%) + B4C (15%) composites required the lowest thickness to stop 50% of the incident photons. The evaluation of experimental results of the RPE revealed that the polymer composites containing SiC (30%), Si (15%) + B4C (15%), or SiC (15%) + B4C (15%) succeeded in blocking 90–91% of X-rays at nearly 80 keV. However, a thicker shield of the proposed composite materials or combined layers with other high-Z materials could be used for higher energies.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Gamma irradiation, thermal conductivity, and phase change tests of the cement‐hyperbranched poly amino‐ester‐block‐poly cabrolactone‐polyurathane plaster‐lead oxide and arsenic oxide composite for development of radiation shielding material

Zehra Merve Cinan,Taylan Baskan,Burcu Erol,Saliha Mutlu,Yasin Misirlioglu,Sevil Savaskan Yilmaz,Ahmet Hakan Yilmaz

DOI: https://doi.org/10.1002/er.7136

IF: 4.6

2021-08-03

International Journal of Energy Research

Abstract:The work which has been done on cement‐polymer composite based shielding materials was comprehensively described in the present article, the choice of the study presented here is based on the choice of the researches. The new Hyperbranched Poly Amino‐Ester‐block‐Poly Caprolactone‐Polyurathane Plaster‐concrete composites mixed with different percentage soft lead oxide and arsenic oxide is used to research gamma‐ray shielding and thermal conductivity characteristics. The synthesis of new Hyperbranched Poly Amino‐Ester‐block‐Poly Caprolactone‐Polyurathane copolymer was achieved by Atom Transfer Reaction and Condensation Polymerization methods. The characterization of Hyperbranched Poly Amino‐Ester‐block‐Poly Caprolactone‐Polyurathane Plaster was made with the Nuclear Magnetic Resonance, Fourier Transform Infrared Spectroscopy, Differential Scanning Calorimetry, Gel Permeation Chromatography, Thermogravimetric Analysis, Scanning Electron Microscope methods. The transmitted fluxes of gamma‐rays that were emitted from source was detected by a High Purity Germanium (HPGe) detector system at Karadeniz Technical University‐Department of Physics in Trabzon and analyzed by a GammaVision (Version:6.07‐Ortec, Oak Ridge, TN) computer program. The composite phase change materials including 89, 87, 69, 67% Portland cement, 1% and 3% PU‐Plaster, 10% and 30% weight percent lead oxide and arsenic oxide was irradiated in the various gamma ray photon energy region (121.78, 344.28, 778.90, 964.08, 1085.87, 1112.07, and 1408.01 keV) for 3600 seconds. Then, linear attenuation coefficients, mass attenuation coefficients, half‐value layer, tenth value layer, mean free path, radiation protection efficiency, and gamma‐rays absorption of concrete‐the Hyperbranched Poly Amino‐Ester‐block‐Poly Caprolactone‐Polyurathane copolymers specimens were experimentally investigated. Thermal properties and morphological analysis of the irradiated substances were explored handling differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscope methods of the nano lead oxide and arsenic oxide including composite phase change material via gamma irradiation were submitted. Moreover, the effect of the Hyperbranched Poly Amino‐Ester‐block‐Poly Caprolactone‐Polyurathane amount on the radiation attenuation of the composite material was investigated. Gamma attenuation experiments have been performed to specify lead equivalent values for the improved composite material. The composite equivalent thickness values from 0.5 to 0.6 cm sample thickness and 0.665 cm radius were obtained. Via crosschecking the acquired data from concrete samples with and without lead and arsenic, it was observed that, if the powder of lead oxide and arsenic oxide to cement ratio of 10% and 30% by weight is added in the concrete mixture, the concrete‐the Hyperbranched Poly Amino‐Ester‐block‐Poly Caprolactone‐Polyurathane composite can be used as a suitable shield against gamma rays. Also, mass attenuation coefficients were calculated as theoretical with the National Institute of Standards and Technology(NIST)‐XCOM database. The thermal conductivity coefficient and the heat capacity of the composites were determined.

energy & fuels,nuclear science & technology
Radiation shielding potential of cellulose acetate-CdO-ZnO polymer composites in comparison with concrete and gypsum

Sherif Nafee,S.A. Tijani,Yas Al-Hadeethi,Mahmoud Ali Hussein

DOI: https://doi.org/10.1016/j.radphyschem.2024.112145

IF: 2.776

2024-08-30

Radiation Physics and Chemistry

Abstract:Radiation shielding using polymer composites is becoming more attractive because of their ease of production, lightness, ruggedness and availability. In this work, linear attenuation coefficient (LAC) and tenth value layer (TVL) of Cellulose Acetate - CdO - ZnO Polymer Composites of different concentrations of CdO and ZnO denoted as PB1, PB2 and PB3 were investigated against concrete and gypsum. Cellulose Acetate-CdO-ZnO Polymer Composites were prepared using the open mold cast technique and have been investigated for x-rays shielding ability. Cellulose acetate is a biodegradable good matrix, while CdO and ZnO are good fillers for absorbing x-rays in the diagnostic energy range. Scanning Electron Microscopy (SEM) technique was used to observe the uniform dispersal of fillers within the matrix. X-rays attenuation coefficients were calculated by XCOM computer code for all the samples using the average energies commonly used in diagnostic radiology practice - 20 keV, 30 keV, 40 keV and 60 keV. The SEM confirmed the dispersal of the fillers (CdO and ZnO) within the matrix. The result of this investigation showed that all the polymer composites (PB1, PB2 and PB3) have higher LACs and lower TVLs over gypsum and concrete at 20 keV, 30 keV, 40 keV and 60 keV. Tenth Value Layers (TVLs) of all the polymer composites is less than 1 cm at 20 keV, 30 keV and 40 keV.

chemistry, physical,physics, atomic, molecular & chemical,nuclear science & technology
Natural fibre high-density polyethylene and lead oxide composites for radiation shielding

A El-Sayed Abdo,M.A.M Ali,M.R Ismail

DOI: https://doi.org/10.1016/s0969-806x(02)00470-x

IF: 2.776

2003-03-01

Radiation Physics and Chemistry

Abstract:Study has been made of the radiation shielding provided by recycled agricultural fibre and industrial plastic wastes produced as composite materials. Fast neutron and gamma-ray spectra behind composites of fibre–plastic (ρ=1.373gcm−3) and fibre–plastic–lead (ρ=2.756gcm−3) have been measured using a collimated reactor beam and neutron–gamma spectrometer with a stilbene scintillator. The pulse shape discriminating technique based on the zero-cross-over method was used to discriminate between neutron and gamma-ray pulses. Slow neutron fluxes have been measured using a collimated reactor beam and BF3 counter, leading to determination of the macroscopic cross-section (Σ). The removal cross-sections (ΣR) of fast neutrons have been determined from measured results and elemental composition of the composites. For gamma-rays, total linear attenuation coefficients (μ) and total mass attenuation coefficients (μ/ρ) have been determined from use of the XCOM code and measured results. Reasonable agreement was found between measured and calculated results.

chemistry, physical,physics, atomic, molecular & chemical,nuclear science & technology
Infants and toddlers with caries. Mental health, family interaction, and life events in infants and toddlers with caries.

L. Wendt,C. Svedin,A. Hallonsten,I. Larsson

Abstract:A child is part of a larger family system and the family, in turn, is part of a broader neighbourhood or community system. Consequently, changes in the family may affect the child and changes in the child, the family. Thus the basic etiological factors for caries are influenced by a number of indirect factors. The aim of this descriptive study was to investigate some of these indirect factors in families of children who had developed carious lesions at one or two years of age. By using a combination of interviews, questionnaires and video recordings, it was possible to obtain information regarding mental health, psychosocial background, life events, and family interaction. The results show that in all the investigated families, life events had occurred, that had caused a great deal of stress. From a descriptive point of view there does not seem to be a typical family in which infants develop caries. However, certain psychosocial factors could be essential for the development of caries in infants. Since family function, family interaction and life events influence many aspects of children's life, dental personnel must be aware of the repercussions this may have upon oral health in infants and toddlers.
Recycled high-density polyethylene plastics added with lead oxide nanoparticles as sustainable radiation shielding materials

Mohamed E. Mahmoud,Ahmed M. El-Khatib,Mohamed S. Badawi,Amal R. Rashad,Rehab M. El-Sharkawy,Abouzeid A. Thabet

DOI: https://doi.org/10.1016/j.jclepro.2017.12.100

IF: 11.1

2018-03-01

Journal of Cleaner Production

Abstract:This work investigates the γ-ray shielding characteristics of composite materials based on recycled high-density polyethylene (r-HDPE). The designed shielding materials are low-cost and sustainable plastic wastes with different fractions of lead oxide nanoparticles (PbO NPs) and bulk powder. The composite samples were prepared via compression molding technique and characterized by Fourier transform infrared spectrophotometer (FT-IR), thermogravimetric analysis (TGA), scanning electron microscope (SEM), field emission-transmission electron microscope (FE-TEM), Brunauer–Emmett–Teller surface area (BET), and X-ray diffraction (XRD). The γ-rays attenuation-coefficients were measured as a function of the percentage of lead oxides for several γ-ray energies using point sources [241Am, 133Ba, 137Cs, and 60Co]. The experimental results show that r-HDPE with both bulk PbO and PbO NPs composites are better shielding for γ-ray than r-HDPE itself. The composites-loaded-PbO NPs were the best shielding materials for γ-ray compared to that filled with bulk PbO. The theoretical values of the linear-attenuation (μ) were extracted from the mass-attenuation coefficient (μ/ρ) and calculated using the XCOM program. The proposed composites when compared to conventional shielding materials implement as strong rivals to barite, steel and concrete particularly at higher filler wt% and for low energy γ-ray.

environmental sciences,green & sustainable science & technology,engineering, environmental
Investigation of nano MgO loaded polyvinyl chloride polymer in protective clothing as a nonlead materials

Maryam Nasrabadi,Hossein Tavakoli-Anbaran,Ehsan Ebrahimibasabi

DOI: https://doi.org/10.1016/j.heliyon.2024.e32711

IF: 3.776

2024-06-08

Heliyon

Abstract:Recently, investigation of advanced shielding materials to be used as an alternative to lead apron has become important. In the current study, MgO loaded into PVC matrix as a non-lead modern shielding composite was modeled to evaluate its performance on radiation protective clothing (RPC). Parameters such as mass attenuation coefficient (MAC), mean free path (MFP), flux buildup factor (FBF), transmission factor (TF) and lead equivalent value (LEV) of samples were calculated using MCNPX Code. The simulation of the MCNP code was validated, by comparing the mass attenuation of concrete sample, with standard XCOM data and very good agreement was attended between XCOM and MC Code results. The MAC of nano and micro-sized samples were also compared with pure PVC and it was found that the nano MgO particle exhibits higher attenuation compared to micro MgO particle and pure PVC. The results show that, the MAC of samples increased to 63.13 % in 1.332 MeV with increasing filler concentration of nano MgO to 50 wt% relative to pure PVC. Investigation of LEV shows that nano MgO sample has more effective than Pb in 1.173 and 1.332 MeV gamma ray energy so that it provides 36.46 % and 11.13 % lighter RPC than Pb ones.
Polarizability, metallization criterion, and radiation attenuation performance of pure and Ag-doped poly (vinyl alcohol) polymers for advanced shielding applications

Miysoon A. Alothman,M. S. Al-Buriahi,H. H. Saleh,Sultan Alomairy,B. T. Tonguç

DOI: https://doi.org/10.1007/s10965-021-02749-x

IF: 3.061

2021-09-15

Journal of Polymer Research

Abstract:The noted Design of a new and effective radiation shielding material is a growing demand to reduce the harmful effects of ionizing radiation in medical and nuclear applications. In this research article, three silver nitrate (AgNO3) doped PVA polymers were reported to serve as potential shielding materials against gamma ray. These polymers were tested in terms of their polarizability, optical transmission, and metallization properties. Furthermore, the radiation shielding performance of the involved polymers was assessed by Geant4 simulations based on Monte Carlo approach over a large range of energies up to 15 MeV. The results indicate that the density of the present polymers increased from 1.19 g/cm3 for pure-PVA to 1.41 g/cm3 for 5% AgNO3 doped PVA sample. At high energies, exceeding 150 keV, LAC values of all investigated samples become almost independent of their chemical composition. For Pure-PVA polymer, the LAC values start from its highest values of 1.358 cm−1 at 15 keV then decrease with increasing energy to be 0.022 cm−1 at 15 MeV. At all penetration depths and energies, EABF values were higher for Pure-PVA than those of other polymers. The AgNO3 addition has a positive impact to improve the shielding performance of the polymer to be close to that of ordinary concrete (standard radiation shield).

polymer science
Gamma-ray shielding effectiveness, optical, mechanical, dielectric properties of nanofiller-reinforced PVA/PVP polymeric blend nanocomposites

Aya El Rahman,H. S. Metwally,N. Sabry,M. I. Mohammed

DOI: https://doi.org/10.1038/s41598-024-76397-8

IF: 4.6

2024-11-11

Scientific Reports

Abstract:The aqueous solution cast method was used to create the biodegradable polymer nanocomposite (PNC) films from a blend of poly (vinyl alcohol) PVA and poly (vinyl pyrrolidone) PVP (70/30 wt %) and Fe 2 O 3 nanoparticles (NPs). These PNC films were characterized using X-ray diffraction, scanning electron microscopy SEM, Fourier transform infrared spectroscopy FTIR, and ultraviolet-visible spectroscopy. XRD and FTIR results indicate that Fe + 3 NPs interact with the host polymer. Optical, electrical, mechanical, and radiation shielding measurements were performed on the PNC films. From the optical measurements, the indirect optical band gap drops from 4.86 eV for the pure blend to 4.26 eV at the greatest NPs concentration. Optical limiting characterization shows that the output power of He-Ne and solid-state green laser beams is reduced from 22.98 to 3.6 mW and 6.59 to 1.4 mW, respectively, when the Fe 2 O 3 NPs content in the blend matrix is increased to 6 wt %. The NGCal software was utilized to calculate nuclear radiation shielding properties. The findings demonstrated that when the concentration of Fe 2 O 3 rose, the PNC films half-value layer and mean free path decreased. Mechanical measurements demonstrate that increasing the Fe 2 O 3 content significantly improves nanocomposite films' yield and tensile strength. Tensile strength is measured at 27.03 MPa for the composite film containing 6 wt % Fe 2 O 3 , which is significantly higher than the 8.66 MPa of the pure (PVA-PVP) film. Compared to the other samples under examination, the 6 wt % Fe 2 O 3 sample yielded the best results (based on the analyzed optical, electrical, mechanical, and radiation shielding properties).

multidisciplinary sciences
Enhancing gamma and neutron radiation shielding efficiency of LDPE/PVC polymers using cobalt, aluminum, and magnesium oxide fillers

Muhammad S. Mansy,Mohamed M. Ghobashy,Mohamed I. Aly

DOI: https://doi.org/10.1016/j.radphyschem.2024.111862

IF: 2.776

2024-05-29

Radiation Physics and Chemistry

Abstract:A procedure for creating and assessing LDPE/PVC polymers using Co, Al, and Mg oxides as fillers for use as radiation shielding material was conducted. The SEM/EDX equipment was utilized for elemental analysis and mapping in order to visually represent the morphology of the produced polymers. The characterizations indicate that the MgCo 2 O 4 particles possess an irregular and tiny morphology, displaying a spherical form with an average diameter of less than 100 nm. In addition, the Al 2 CoO 4 particles are characterized as being aggregated, diminutive, and exhibiting a spherical morphology, with an average diameter of less than 150 nm. The current study involved experimental investigation, simulation using FLUKA-MC code, and theoretical calculations using Phy-X-PSD code to examine the radiological properties of the shielding material. The results depend on several factors, including the half-value layer (HVL), the effective atomic number (Z eff ), the effective electron number (N eff ), the effective conductivity (C eff ), the exposure buildup factor (EBF), the energy-absorption buildup factor (EABF), and the fast neutron macroscopic removal cross-section (FNRC). The SR-NIEL-7 platform has been utilized to compute the mass-stopping power for protons (H + ) and alpha particles (He ++ ) based on their kinetic energy. The experimental findings indicate that the density of LDPE/PVC filled with MgCo 2 O 4 is greater than that of Al 2 CoO 4 . Furthermore, polymer filled with MgCo 2 O 4 exhibits higher values for MAC, LAC, and FNRCs than Al 2 CoO 4 filler. The measured LAC and MAC conform to the simulated values.

chemistry, physical,physics, atomic, molecular & chemical,nuclear science & technology
Theoretical Calculation of Gamma-Ray and Neutron Shielding Properties for CsPbBr3-Polypropylene Composite Material

Junfeng Zhao,Yuanjie Sun,Yue Zhang,Zhigang Li,Hongtao Zhao,Qingyu Wang

DOI: https://doi.org/10.1080/00295450.2024.2323257

IF: 1.667

2024-04-19

Nuclear Technology

Abstract:The impact of CsPbBr 3 , known for its high atomic number and cross section with neutrons, on the gamma-ray and neutron shielding properties of CsPbBr 3 -polypropylene (PP) composite material was investigated in this study. Critical shielding parameters, including linear attenuation coefficient μ, mass attenuation coefficient μ m , half-value thickness, tenth-value layer, and mean free path (MFP), were calculated using Phy-X/PSD software. Additionally, two types of gamma-ray buildup factors, i.e., exposure buildup factor and energy absorption buildup factor, were computed within the range of 0.015 to 15 MeV for depths up to 40 MFP. Furthermore, the neutron shielding ability was evaluated by determining the neutron total effective removal cross section. The results demonstrate that the incorporation of CsPbBr 3 enhances the gamma-ray and neutron shielding characteristics of the CsPbBr 3 -PP composite material.

nuclear science & technology

Mineral and vitamin deficiencies can accelerate the mitochondrial decay of aging.

Flexible, Chemically Bonded Bi-PVA–PVP Composite for Enhanced Diagnostic X-ray Shielding Applications

Study on Lead Iodide-Polyvinyl Alcohol Polymer Composites as an X-ray Shielding Material

Multifiller-based polymer composites for shielding high energy ionising radiation

Fabrication, Structural Characterization, and Photon Attenuation Efficiency Investigation of Polymer-Based Composites

Tungsten-based polymer composite, a new lead-free material for efficient shielding of coupled neutron-gamma radiation fields: A FLUKA simulation study

X-Ray and γ-Ray Shielding Efficiency of Polymer Composites: Choice of Fillers, Effect of Loading and Filler Size, Photon Energy and Multifunctionality

Superiority of micro/nano tungsten carbide reinforced poly-methyl methacrylate composites in shielding gamma radiation

Flexible, chemically bonded bismuth/tungsten‐based polyvinyl alcohol‐polyvinyl pyrrolidone composite for gamma and neutron shielding application

Attenuation properties of poly methyl methacrylate reinforced with micro/nano ZrO2 as gamma-ray shields

Development of New Lead-Free Composite Materials as Potential Radiation Shields

Gamma irradiation, thermal conductivity, and phase change tests of the cement‐hyperbranched poly amino‐ester‐block‐poly cabrolactone‐polyurathane plaster‐lead oxide and arsenic oxide composite for development of radiation shielding material

Radiation shielding potential of cellulose acetate-CdO-ZnO polymer composites in comparison with concrete and gypsum

Natural fibre high-density polyethylene and lead oxide composites for radiation shielding

Infants and toddlers with caries. Mental health, family interaction, and life events in infants and toddlers with caries.

Recycled high-density polyethylene plastics added with lead oxide nanoparticles as sustainable radiation shielding materials

Investigation of nano MgO loaded polyvinyl chloride polymer in protective clothing as a nonlead materials

Polarizability, metallization criterion, and radiation attenuation performance of pure and Ag-doped poly (vinyl alcohol) polymers for advanced shielding applications

Gamma-ray shielding effectiveness, optical, mechanical, dielectric properties of nanofiller-reinforced PVA/PVP polymeric blend nanocomposites

Enhancing gamma and neutron radiation shielding efficiency of LDPE/PVC polymers using cobalt, aluminum, and magnesium oxide fillers

Theoretical Calculation of Gamma-Ray and Neutron Shielding Properties for CsPbBr3-Polypropylene Composite Material