Abstract:The rapid development of wearable electronics, humanoid robots, and artificial intelligence requires sensors to sensitively and stably detect external stress variations in large areas or on three-dimensional (3D) irregularly shaped surfaces while possessing the comfort. Most importantly, the flexibility and 3D compliance of sensors, and the fitting state of the interface between the sensor and the object are of great significance to the sensing accuracy and reliability. The ordered or random stacking and entangling of flexible and electrically conductive fiber materials can form a highly porous and mechanically stable fiber assembly. The changes in external stress can lead to the air trapped in the fiber assembly to flow in and out rapidly and repeatedly, as well as the reversible mechanical deformation of fiber materials. Correspondingly, the contact areas between electrically conductive fibers in the fiber assembly are reversibly changed, which makes the conductive and flexible fiber assembly be an ideal candidate for piezoresistive sensing material. It can be further expected that the statistical stability of contact points between conductive fibers under the stress may significantly increase with the decrease in fiber diameters. Herein, a new method to make a flexible piezoresistive sensor with conductive and porous fiber assembly was proposed. An ultrasensitive piezoresistive material was facilely prepared by fabricating conductive poly(vinyl alcohol-<i>co</i>-ethylene) (EVOH) nanofiber assemblies. The sensing performance of the piezoresistive sensor was optimized by regulating the nanofiber morphology, electrical conductivity, and mechanical properties. The flexible piezoresistive sensor exhibited a sensitivity of 2.79 kPa<sup>–1</sup>, a response time of 3 ms, and a recovery time of 10 ms. The sensing performance at different working frequencies was stable and durable within 4500 cycling tests. The flexible sensor showed good pressure-sensing accuracy and reliability when used on irregular surfaces and therefore was further applied in the static monitoring of large-area spatial pressure distribution and the wearable intelligent interactive device, demonstrating great application potential.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10516?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10516</a>.SEM images, water transmission ability, stability, the resistance change of the CNA while stretching and bending, optimized sensing performance of CNA, and the calculation model analysis of the CNA (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10516/suppl_file/am0c10516_si_001.pdf">PDF</a>)Recording of the specific example of the corresponding zoom-in and zoom-out functions when the fingers perform the opening and merging operations (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10516/suppl_file/am0c10516_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Fabrication, Evaluation, and Multiscale Simulation of Piezoelectric Composites Reinforced Using Unidirectional Carbon Fibers for Flexible Motion Sensors

Hierarchically Structured Hollow PVDF Nanofibers for Flexible Piezoelectric Sensor

Piezoelectric Polyacrylonitrile Nanofiber Film-Based Dual-Function Self-Powered Flexible Sensor.

Evaluation of Electromechanical Properties and Conversion Efficiency of Piezoelectric Nanocomposites with Carbon-Fiber-Reinforced Polymer Electrodes for Stress Sensing and Energy Harvesting

A Flexible and Multipurpose Piezoresistive Strain Sensor Based on Carbonized Phenol Formaldehyde Foam for Human Motion Monitoring

Synthesis of Percolative Hyperelastic Conducting Composite and Demonstrations of Application in Wearable Strain Sensors

Flexible Piezoelectric Sensor Based on Two-Dimensional Topological Network of PVDF/DA Composite Nanofiber Membrane

Self-Powered Sensors Made with Fabric-Based Electrodes and a Conductive Coating

Effect of carbon black addition on electromechanical performance of flexible piezoelectric composite films

Carbon Fiber-Reinforced Piezoelectric Nanocomposites: Design, Fabrication and Evaluation for Damage Detection and Energy Harvesting

A Conductive and Anti-impact Composite for Flexible Piezoresistive Sensors

Self-Powered Wearable Pressure Sensors with Enhanced Piezoelectric Properties of Aligned P(VDF-TrFE)/MWCNT Composites for Monitoring Human Physiological and Muscle Motion Signs

Breathable and Large Curved Area Perceptible Flexible Piezoresistive Sensors Fabricated with Conductive Nanofiber Assemblies

Widening the Sensing Range of Piezoresistive Composites by Constructing Multilevel Porous Structure

Nano‐Engineered Carbon Fibre‐Based Piezoelectric Smart Composites for Energy Harvesting and Self‐Powered Sensing

PVDF/AgNP/MXene composites-based near-field electrospun fiber with enhanced piezoelectric performance for self-powered wearable sensors

Nanosheet‐Doped Polymer Composites with High Intrinsic Piezoelectric Properties for Energy Harvesting

Electrospun Polyvinylidene Fluoride Piezoelectric Fiber Glass/Carbon Hybrid Self-Sensing Composites for Structural Health Monitoring

Electromechanical characterization and kinetic energy harvesting of piezoelectric nanocomposites reinforced with glass fibers

High Performance Piezoelectric Devices Based on Aligned Arrays of Nanofibers of Poly[(vinylidenefluoride-co-trifluoroethylene]

High-Performance Flexible Piezoelectric Sensor Using Electrospun PVDF-BaTiO3 Nanofibers for Human Motion Monitoring and Recognition