Abstract:A small, compact size antenna with multiband frequency function has become a high demand in this modern era. This demand for this multiband frequency antenna increases throughout the year due to evolution of modern technologies that in need of small devices with multi functions. In wireless communication system, a microstrip patch antenna was introduced to fulfil the requirement of the modern technologies. The antenna is built with small sizes with the ability to operate multiband frequencies. A quad-band monopole antenna is introduced in this paper. The purpose of this project is to design an antenna that has the capability of operating four different types of frequencies which are 915 MHz for RFID application, 2.4 GHz and 5.8 GHz for WLAN and 3.5 GHz for WiMAX application. The antenna is designed and simulated by using a Computer Simulation Technology (CST) software. The results obtained from the simulation process was analysed and recorded. The antenna is designed to have eight symmetrical rectangular strip lines microstrip patch. The substrate used for this antenna is FR-4 that has the permittivity of 4.3 and the dimension of 20 mm x 28 mm x 1.6 mm. A ground plane is constructed at the back of the antenna and it is fed with 50Ω microstrip line. The designing process involve three stages of antenna modification which are antenna 1 (four strip lines), antenna 2 (six strip lines) and antenna 3 (eight strip lines). The antenna managed to achieve quad band frequency in the simulation and has omni-directional radiation pattern. However, two of the operating frequency are for different frequency application. The new frequency application is 1.5 GHz for Global Positioning System (GSP) and 2.9 GHz for Third Generation (3G) application. Therefore, the results proved that the antenna designed can be used for GPS and 3G application.

Analysis and Design of a High Gain Multiband Antenna Based on Metamaterials for RFID Applications

A novel printed folded dipole antenna used for modern RFID system

A Metamaterial Inspired AMC Backed Dual Band Antenna for ISM and RFID Applications

A MINIATURIZED PRINTED DIPOLE ANTENNA WITH V-SHAPED GROUND FOR 2.45 GHZ RFID READERS

A miniaturized flexible implantable antenna with metamaterial resonators for biomedical applications

Design of Flexible Dual‐band Antenna and Metamaterial Structure for Wearable Body Area Network

A High Gain Antenna with an Optimized Metamaterial Inspired Superstrate

Physical analysis of high refractive index metamaterial-based radiation aggregation engineering of planar dipole antenna for gain enhancement of mm-wave applications

Design and performance investigation of metamaterial-inspired dual band antenna for WBAN applications

Metasurface loaded twin-port microstrip antenna with circular polarization features for UHF RFID applications

Analysis of Dipole-Like Ultra High Frequency Rfid Tags Close to Metallic Surfaces

Design of Compact Passive Tag Antenna for Practical Rfid Applications

A Review on the History and Current Literature of Metamaterials and Its Applications to Antennas & Radio Frequency Identification (RFID) Devices

Design a Quad Band Monopole Antenna for RFID, WLAN and WiMAX Application

Analysis and Design for a Kind of Printed Dipole Antenna Used at 915 MHz

Metamaterial‐based, Miniaturised Circularly Polarised Antennas for RFID Application

An high-gain subwavelength cavity-based antenna based on metamaterial in L-band

Design and Analysis of a Quad-Band Antenna for IoT and Wearable RFID Applications

A Low-Profile Metal-backed Dipole Loaded with Closely Coupled Arc-shaped Open Stubs for On-metal Tag Design with Wide Frequency Tuning Capability

Design of a high-gain and broadband metamaterial microstrip antenna

A novel printed dipole UHF RFID reader antenna