An Amplified Fluorescent Biosensor for Ag+ Detection Through the Hybridization Chain Reactions.
Hengxuan Li,Minghui Chen,Ran Luo,Weipan Peng,Xiaoqun Gong,Jin Chang
DOI: https://doi.org/10.1016/j.colsurfb.2021.111686
IF: 5.999
2021-01-01
Colloids and Surfaces B Biointerfaces
Abstract:Ag is widely distributed in nature and it is used in almost all areas of human life. However, due to the widespread use of Ag materials, Ag+ pollution seriously threatens the human health and environment. The traditional detection methods for Ag+ suffer from disadvantages including high operational cost, complicated operating unit and instrument, and high requirements for professionals. Thus, in this study, a new type of Ag+ detection biosensor based on the hybridization signal amplification was designed to overcome these problems. Combining cytosine-Ag+-cytosine mismatch structure with the hybridization chain reaction, this biosensor converted the conventional detection signal into the nucleic acid amplification signal, which realized efficient, rapid, sensitive, and specific detection of Ag+. The limit-of-detection of this sensor reached 0.69 pM, which is much less than the maximum concentration (0.1 mg L-1, 927 nM) suggested for drinking water by the World Health Organization, and the maximum concentration (0.05 mg L-1, 464 nM) suggested by the United States Environmental Protection Agency. This method provides a promising new platform for detecting Ag+ concentrations at ultralow levels.