Electrochemistry of potentially bioreductive alkylating quinones Part 1. Electrochemical properties of relatively simple quinones, as model compounds of mitomycin- and aziridinylquinone-type antitumour agents

R. Driebergen,J. Hartigh,J. Holthuis,A. Hulshoff,W. J. Oort,S. kelder,W. Verboom,D. Reinhoudt,M. Bos,W. E. Linden

DOI: https://doi.org/10.1016/S0003-2670(00)83486-8

Abstract:

What problem does this paper attempt to address?

A Dissipative Particle Dynamics Study on the Compatibilizing Process of Immiscible Polymer Blends with Graft Copolymers

Jia-Jun Wang,Zi-Zi Li,Xue-Ping Gu,Lian-Fang Feng,Cai-Liang Zhang,Guo-Hua Hu

DOI: https://doi.org/10.1016/j.polymer.2012.08.030

IF: 4.6

2012-01-01

Polymer

Abstract:The dissipative particle dynamics (DPD) is used to study the compatibilizing process of an immiscible polymer blend using a graft copolymer as a compatibilizer. Polystyrene (PS) and polyamide 6 (PA6) are chosen as the polymer components of the blend. The graft copolymer is composed of PS as the backbone and PA6 as the grafts. Mesoscale morphology, density distribution, end-to-end distance of PA6 and interfacial tension are investigated. Simulations show that the presence of a graft copolymer contributes to the formation of finer and more uniform dispersed domains by preventing them from collision and coalescence. In the presence of a graft copolymer, the density distribution is more uniform and the dynamic equilibrium of the blend morphology is reached more rapidly. For a given backbone and number of grafts per backbone, the compatibilizing efficiency of the graft copolymer first increases with increasing graft length. However, when the graft length exceeds a certain value, it starts decreasing.
The Phase Behaviors of Cylindrical Diblock Copolymers and Rigid Nanorods' Mixtures

Linli He,Linxi Zhang,Hongping Chen,Haojun Liang

DOI: https://doi.org/10.1016/j.polymer.2009.04.068

IF: 4.6

2009-01-01

Polymer

Abstract:Mixtures of cylindrical forming diblock copolymers (DBCPs) and mobile nanorods (NRs) are systematically investigated via dissipative particle dynamics (DPD) simulations. Final morphology of such composites depends not only on the characteristics of the copolymers, but also on the physical or chemical features of NRs, such as NR number, length, and surface adsorption (neutral, A and B attractive). A consideration of enthalpic and entropic interactions is necessary when physically or chemically distinct NRs are introduced into the copolymer/nanorod composites. For the short NRs, the phase behavior is similar to that of spherical nanoparticles (NPs). For the long NRs, the self-assembly of NRs can influence both the orientation and morphology of diblock/nanorod mixtures. If more NRs are incorporated, under stronger confinement from the host phase separated domains, the long NRs will aggregate and self-assemble into a certain spatial organization, inducing the morphological transitions of the composites from one phase to another. This behavior is not encountered for a similar system doped with spherical particles, emphasizing the role of particle shape in the interaction between doping particles and the host phase.
Microphase Transitions of Block Copolymer/nanorod Composites under Shear Flow

Linli He,Zhangquan Pan,Linxi Zhang,Haojun Liang

DOI: https://doi.org/10.1039/c0sm00703j

IF: 4.046

2011-01-01

Soft Matter

Abstract:The shear-induced reorientations and phase transitions of symmetric diblock copolymer/nanorod nanocomposites subjected to steady shear flow, are systematically investigated via dissipative particle dynamics (DPD) simulation method. Both selective and nonselective nanorods (NRs) are considered, with low and high NRs concentrations. To preserve lamellar morphology in the nanocomposites, the NRs concentration is controlled below 15%. The final morphologies of nanocomposites depend on the interplay between NRs and diblock copolymers (DBCPs) under shear flow. The cooperatively induced microphase structures include lamellar (parallel, diagonal and perpendicular alignment), ribbon and cylindrical phases. The presence of anisotropic NRs not only delays or advances the shear-induced transition in lamellae orientation, but also induces the phase transitions by changing the effective composition of the copolymers (f(eff)) in nanocomposites. Meanwhile, the low viscosity in the perpendicular lamellae of DBCPs provides an energetic reason for the lamellae changing into perpendicular orientation, with the shear thinning. The shear thinning corresponds to the reorientation of the lamellae, while the shear thickening corresponds to the phase transition from lamellar to ribbon, and to cylindrical structure.
Effect of Nanorods on the Mesophase Structure of Diblock Copolymers.

Linli He,Linxi Zhang,Agen Xia,Haojun Liang

DOI: https://doi.org/10.1063/1.3089713

IF: 4.304

2009-01-01

The Journal of Chemical Physics

Abstract:Mixtures of symmetric diblock copolymers and rigid nanorods (NRs) that are preferentially wetted by one of the blocks (A) are systematically investigated via dissipative particle dynamics simulations. The morphology of such composites depends not only on the characteristics of the copolymers, but also on the physical or chemical features of the NRs, such as NR volume fraction, size, and polymer-NR interaction. We find that the presence of NRs influences the phase behavior of copolymers and the phase-separated domains of copolymers in turn confine the NRs spatial distribution and positional orientation. The morphologies and phase transitions of hybrids and the corresponding NRs distributed and oriented regularities can be rationalized on the basis of the relative enthalpic and entropic effects involving all of the species, A and B blocks, and NRs. These results suggest that by choosing appropriate parameters, our model systems may provide a prediction to control and design the high-performance composites.
The Effects of Nanoparticles on the Lamellar Phase Separation of Diblock Copolymers

Linli He,Linxi Zhang,Haojun Liang

DOI: https://doi.org/10.1021/jp0757412

2008-01-01

Abstract:The phase separation of diblock copolymers containing, some energetically neutral/biased nanoparticles is studied by means of large-scale dissipative particle dynamics (DPD) simulations. The effects of the volume fraction of nanoparticles, the size of nanoparticles, and the interaction strength between nanoparticles and blocks on the lamellar phase separation of diblock copolymers are investigated. When these effects are up to a critical value, the diblock copolymer nanocomposites can form a new bicontinuous morphology, which is well consistent with the experimental results. It is also found that the degree of order of phase separation for a given system increases slightly and then decreases abruptly until the bicontinuous morphology is formed as the volume fraction of nanoparticles increases. Furthermore, we discuss the microphase transition through the position distributions of nanoparticles and present a phase diagram in terms of the nanoparticle volume fraction, size, and surface interaction strength.
Mono- or Bidisperse Nanorods Mixtures in Diblock Copolymers

Linli He,Linxi Zhang,Haojun Liang

DOI: https://doi.org/10.1016/j.polymer.2010.05.026

IF: 4.6

2010-01-01

Polymer

Abstract:Mixtures of diblock copolymers (DBCPs) and mono- or bidisperse nanorods (NRs), are systematically investigated via dissipative particle dynamics simulations. For the mixtures of DBCPs and monodisperse NRs, we investigate the effects of the nanorod (NR) volume fraction, NR length, and interaction strength between blocks and NRs on the self-assembly of the composites. For the mixtures of DBCPs and bidisperse NRs in which the NRs are different in length, the binary NRs with varied compositions can induce various morphological transitions, as well as present the uniform orientations and discriminative distributions. The inherent mechanism for driving such rich phase behaviors can be further exploited on the basis of considering the enthalpic and entropic effects. The results provide some guidelines for engineering nanocomposites with the desired morphologies and functions.
Ordered Structures Of Diblock Nanorods Induced By Diblock Copolymers

Aihua Chai,Dong Zhang,Yangwei Jiang,Linli He,Linxi Zhang

DOI: https://doi.org/10.1063/1.4819775

IF: 4.304

2013-01-01

The Journal of Chemical Physics

Abstract:The self-assembly of diblock copolymer (DBCP)/diblock nanorod (DBNR) mixtures are studied by using a dissipative particle dynamics simulation method. The microstructures of DBCP/DBNR blends depend on the type of DBCPs as well as the number of DBNRs. For the asymmetric DBCPs of A(3)B(7), the morphological transition of DBCP/DBNR blends from cylinder phase to lamellar phase is observed for the DBNRs with suitable length and component. Meanwhile, for the symmetric DBCPs of A(5)B(5), the lamellar morphologies of DBCP/DBNR blends can always maintain during the process of adding DBNRs to the blends except for the case of component length mismatch between the DBCPs and the DBNRs. On the other hand, DBCPs can also affect the orientation and the spatial distributions of DBNRs deeply, and the ordered structures of DBNRs are formed for the DBCP/DBNR blends with a large number of DBNRs. Comparisons with homopolymer/DBNR blends are made, and only the aggregation structures are observed in homopolymer/DBNR blends. This investigation can provide valuable assistance in exploring and designing complicated polymer/nanoparticle composites with the desired properties. (C) 2013 AIP Publishing LLC.
The dynamic behaviors of diblock copolymer/nanorod mixtures under equilibrium and nonequilibrium conditions

Zhengquan Pan,Linli He,Linxi Zhang,Haojun Liang

DOI: https://doi.org/10.1016/j.polymer.2011.04.012

IF: 4.6

2011-01-01

Polymer

Abstract:Cylindrical diblock copolymer/anisotropic nanorod composites under equilibrium and nonquilibrium conditions, have been modeled and simulated using dissipative particle dynamics. The aim of our present study is to understand how the anisotropic NRs affect the equilibrium self-assembled structure of diblock copolymers (DBCPs) melts and how the shear flow induces the dynamic behaviors of DBCPs/NRs composites, especially the orientation and distribution of NRs in diblock matrix. We consider two different shear directions categorized with respect to the flow velocity parallel or perpendicular to the orientation of initial structures, which are defined as z-axis shear flow and x-axis shear flow, respectively. Our results show the shear flow not only aligns the orientation of DBCPs template and the dispersed NRs toward the flow direction, but also regulates the orientational and positional order of NRs. The final self-assembly behaviors of DBCPs/NRs nanocomposites is determined by the interplay between shear-induced polymer thinning and NRs dispersion. This work provides us a viable strategy for creating polymer nanocomposites with tunable and enhanced processing properties.
Phase Behaviors of Diblock Copolymer/nanorod Composites under Oscillatory Shear Flow

Linli He,Shiben Li,Linxi Zhang

DOI: https://doi.org/10.1002/app.38039

IF: 3

2012-01-01

Journal of Applied Polymer Science

Abstract:The phase behaviors of lamellar diblock copolymers (DBCPs) melts and lamellar DBCPs/nanorods (NRs) composites subjected to oscillatory shear flow, have been investigated using dissipative particle dynamics. The oscillatory shear is a quite common shearing mode used in experiments and manufacturing processes. The rich lamellar (LAM) reorientation and morphological transition of systems strongly depend on the shear amplitude and shear frequency. At very low frequency, the amplitude-induced phase behaviors of DBCPs melts or DBCPs/NRs composites are quite similar to those subjected to a steady shear. For DBCPs/NRs case, we control NRs concentration low 15% to preserve LAM morphology in the nanocomposites, and simultaneously consider both types of selective and nonselective NRs. Our aim is to compare the different inductions on DBCPs melts or nanocomposites caused by shear amplitude and frequency, and observe how the NRs are oriented and dispersed in phase-separated copolymers matrix while under oscillatory shear, and how the presence of selective/nonselective NRs affects the shear-induced LAM reorientations and rheological properties of systems. Our results show the NRs orientation not only directly depend on the imposed shear flow but also is interfered by the alignment of shear-stretched copolymer molecules. The shear viscosity decreases with the frequency decreases, also influenced by the NRs concentration and surface property. (c) 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
Photo-induced bond breaking during phase separation kinetics of block copolymer melts: A dissipative particle dynamics study

Ashish Kumar Singh,Avinash Chauhan,Sanjay Puri,Awaneesh Singh

DOI: https://doi.org/10.48550/arXiv.2011.08039

2020-11-16

Abstract:Using dissipative particle dynamics (DPD) simulation method, we study the phase separation dynamics in block copolymer (BCP) melt in $d=3$, subjected to external stimuli such as light. An initial homogeneous BCP melt is rapidly quenched to a temperature $T < T_c$, where $T_c$ is the critical temperature. We then let the system go through alternate light "on" and "off" cycles. An on-cycle breaks the stimuli-sensitive bonds connecting both the blocks A and B in BCP melt, and during the off-cycle, broken bonds reconnect. By simulating the effect of light, we isolate scenarios where phase separation begins with the light off (set 1); the cooperative interactions within the system allow it to undergo microphase separation. When the phase separation starts with the light on (set 2), the system undergoes macrophase separation due to the bond breaking. Here, we report the role of alternate cycles on domain morphology by varying bond-breaking probability for both the sets 1 and 2, respectively. We observe that the scaling functions depend upon the conditions mentioned above that change the time scale of the evolving morphologies in various cycles. However, in all the cases, the average domain size respects the power-law growth: $R(t)\sim t^{\phi}$ at late times, here $\phi$ is the dynamic growth exponent. After a short-lived diffusive growth ($\phi \sim 1/3$) at early times, $\phi$ illustrates a crossover from the viscous hydrodynamic ($\phi \sim 1$) to the inertial hydrodynamic ($\phi \sim 2/3$) regimes at late times.

Soft Condensed Matter,Materials Science,Statistical Mechanics
Mesoscopic Dynamics Simulation of Diblock Copolymer:Morphology and Kinetics

A.Z. Genack,A.A. Chabanov,P. Sebbah,B.A. Van Tiggelen

2007-01-01

Abstract:Mesoscopic dynamics was used to simulate 3-D irregular mesoscale morphologies and kinetics of aqueous solutions of diblock copolymer PPO(ethylene oxide)-PEO(propylene oxide).The influence of the relative content of PPO and the concentration of the copolymer on the morphology and the mixture properties were discussed.The evolution of the kinetics and the influence of the relative PPO and interaction parameters on the evolution are also discussed.The results show that the morphology of the mixture evolves from gel to micelle as the polymer concentration or PPO content decrease.The formation of the mesoscale morphologies in an aqueous polymer solution can be divided into a rapid gel or micelle formation followed by imperceptible changes of the mesoscale morphologies,with decreasing system energy and the system tending to equilibrium.Furthermore,the PPO content in the aqueous poplymer solution and the interaction parameters affect the evolution process.Increased PPO content or interaction parameters facilitate formation of the hydrophobic core and separation of the two phases.
Solvent-Induced Morphology of the Binary Mixture of Diblock Copolymer in Thin Film: the Block Length and Composition Dependence of Morphology

Rui Guo,Haiying Huang,Binyang Du,Tianbai He

DOI: https://doi.org/10.1021/jp808551j

2009-01-01

Abstract:A series of binary SB blend samples with various overall volume fraction of PS (Phi(PS)) and different discrete distribution of the block length (denoted as d(PS) or d(PB)) were prepared by mixing various asymmetric poly(styrene)-block-poly(butadiene) (SB) block copolymers with a symmetric SB block copolymer. The influences of the external solvent field, composition, and the block length distribution on the morphologies of the blends in the thin films were investigated by atomic force microscopy (AFM) and transmission electron microscopy (TEM). The experimental results revealed that after solvent annealing, the interface of the blend thin films depended mainly on the cooperative effects of the annealing solvent and the inherently interfacial curvature of the blends. Upon exposure to the saturated vapor of cyclohexane, which has preferential affinity for the PB block, a "threshold" of Phi(PS) (approximate 0.635-0.707) was found. Below such threshold, the influence of the annealing solvent played an important role on the interfacial curvature of the blend thin film. The morphologies of the thin films and the long-range order of the structures were related to the value of d(PS), regardless of the change of d(PB).
Photomodulated phase-separation kinetics in block copolymer melts: a DPD simulation study

Avinash ChauhanAshish Kumar SinghAwaneesh SinghDepartment of Physics,Indian Institute of Technology (BHU),Varanasi,Uttar Pradesh,India

DOI: https://doi.org/10.1080/08927022.2024.2316819

2024-02-15

Molecular Simulation

Abstract:We study phase-separation kinetics of symmetric diblock copolymer (BCP) melt in 3d subjected to sequential light on/off cycles. The incompatible blocks of each BCP chain are connected by a photosensitive bond, which undergoes breakage during photo-illumination (on-cycle) and recombination during the off-cycle. We set a shorter fixed time limit for each on-cycles and focus on analysing how the much longer duration of the light off-cycles affects the segregation kinetics. We explore two scenarios for each off-cycle time variation: one with equal and another with increasing durations. For both cases, we determine the rate constants for bond formation and degradation reactions and assess their influence on the dynamical scaling functions and the growth scale of evolving morphologies. The average domain size typically exhibits diffusive growth ( R(t)∼t1/3 ) for a couple of cycles in the beginning. However, the domain growth nearly freezes during the rest of the cycles, resulting in bicontinuous and nearly frozen isotropic morphologies.

chemistry, physical,physics, atomic, molecular & chemical
Dissipative Particle Dynamics Simulation for Reaction-Induced Phase Separation of Thermoset/Thermoplastic Blends

Yoshiaki Kawagoe,Gota Kikugawa,Keiichi Shirasu,Yuuki Kinugawa,Tomonaga Okabe

DOI: https://doi.org/10.1021/acs.jpcb.3c07756

IF: 3.466

2024-02-20

The Journal of Physical Chemistry B

Abstract:Reaction-induced phase separation occurs during the curing reaction when a thermoplastic resin is dissolved in a thermoset resin, which enables toughening of the thermoset resin. As resin properties vary significantly depending on the morphology of the phase-separated structure, controlling the morphology formation is of critical importance. Reaction-induced phase separation is a phenomenon that ranges from the chemical reaction scale to the mesoscale dynamics of polymer molecules. In this...

chemistry, physical
Dissociation effect of non-covalent bond for morphological behavior of triblock copolymers: a dissipative particle dynamics study

Yusuke Araki,Noriyoshi Arai

DOI: https://doi.org/10.1080/00986445.2019.1680369

2019-10-25

Chemical Engineering Communications

Abstract:The nanophase separation structure produced by block polymers is used for highly functional materials and has been studied for 50 years. In recent years, researchers have shown interest in introducing non-covalent bonds, such as hydrogen bonds and metal–ligand bonds, to polymers. The non-covalent bond dissociates or recombines in response to physical conditions, including temperature and concentration. The non-covalent bond freely controls the phase separation structure, namely, the physical properties of the polymer material. However, various interactions are involved in the formation process, for example, polymer–polymer, polymer–solvent, bonding and bending in the polymer. To control the self-assembled structure, it is necessary to understand the influence of the non-covalent bond at the molecular level. In this study, we investigated the effect of the non-covalent bond on a stage of phase separation immediately after dissociation (early-stage) of self-assembled morphologies by introducing the binding site to the triblock polymers. Various stable morphologies, including lamellar, lamellar with a grain boundary, and pre-lamellar, were observed by changing the positions of the non-covalent bond, their dissociation ratio, and the initial configurations. Moreover, we calculated the radial distribution function and static structure factor to identify the structural features. The results suggested that the early-stage of self-assembled morphology in polymer melt could be controlled by the position of the non-covalent bond and its dissociation ratio.

engineering, chemical
Photoinduced Morphology Change in Ionic Supramolecular Block Copolymer

Kseniia M. Karnaukh,Shuyi Xie,Kai-Chieh Yang,Komal Komal,Rachel A. Segalman,Javier Read de Alaniz

DOI: https://doi.org/10.1039/d4py00682h

IF: 4.6

2024-09-04

Polymer Chemistry

Abstract:Physically mixing two dissimilar polymers often results in a macroscopically segregated blend with poor optical clarity and mechanical properties. Previously, we demonstrated that chain end functionalization of immiscible polymer blends with oppositely paired acid and base groups leads to an ionic supramolecular block copolymer with electrostatically stabilized microdomains that suppress macroscopic phase separation. In this work, a functionalized polydimethylsiloxane with a photochromic diarylethene (DAE) end-group (PDMS-ω-DAE) is blended with a sulfonic acid end-functionalized polystyrene (PS-ω-SO3H), forming an ionic supramolecular block copolymer with tunable morphology by light. When the DAE is irradiated with UV light, it triggers an isomerization from the ring-opened (DAE–O) to the ring-closed (DAE–C) form. The light-induced conformational change in the chain-end group chemistry substantially alters the ionic junctions, leading to a phase structure difference in the solid-state from hexagonally packed cylinders (HEX) to lamellae (LAM). After UV radiation, the more localized positive charge on DAE–C led to stronger ionic bonds between the two dissimilar blocks, while the repulsion between adjacent DAE–C groups increased. The stronger electrostatic repulsion along the interface resulted in increased interfacial area per polymer chain and thus induced such phase transition. The light-induced phase transition of this system demonstrates that the ionic interactions can be tuned on-demand to create different morphologies from a single polymer blend.

polymer science
Dynamics and order–disorder transitions in bidisperse diblock copolymer blends

Yueqiang Wang,Xuan Li,Ping Tang,Yuliang Yang

DOI: https://doi.org/10.1016/j.physb.2010.12.066

2011-01-01

Abstract:We employ the dynamic extension of self-consistent field theory (DSCFT) to study dynamics and order–disorder transitions (ODT) in AB diblock copolymer binary mixtures of two different monodisperse chain lengths by imitating the dynamic storage modulus G′ corresponding to any given morphology in the oscillatory shear measurements. The different polydispersity index (PDI) is introduced by binary blending AB diblock copolymers with variations in chain lengths and chain number fractions. The simulation results show that the increase of polydispersity in the minority or symmetric block introduces a decrease in the segregation strength at the ODT, (χN)ODT, whereas the increase of polydispersity in the majority block results in a decrease, then increase and final decrease again in (χN)ODT. To the best of our knowledge, our DSCFT simulations, for the first time, predict an increase in (χN)ODT with the PDI in the majority block, which produces the experimental results. The simulations by previous SCFT, which generally speaking, is capable of describing equilibrium morphologies, however, contradict the experimental data. The polydispersity acquired by properly tuning the chain lengths and number fractions of binary diblock copolymer blends should be a convenient and efficient way to control the microphase separation strength at the ODT.
Morphological Transformations of Diblock Copolymers in Binary Solvents: A Simulation Study

Zheng Wang,Yuhua Yin,Run Jiang,Baohui Li

DOI: https://doi.org/10.48550/arXiv.1703.08913

2017-03-27

Abstract:Morphological transformations of amphiphilic AB diblock copolymers in mixtures of a common solvent (S1) and a selective solvent (S2) for the B block are studied using the simulated annealing method. We focus on the morphological transformation depending on the fraction of the selective solvent CS2, the concentration of the polymer CP, and the polymer-solvent interactions {\epsilon}ij (i = A, B; j = S1, S2). Morphology diagrams are constructed as functions of CP, CS2, and/or {\epsilon}AS2. The copolymer morphological sequence from dissolved -> sphere -> rod-> ring/cage-> vesicle is obtained upon increasing CS2 at a fixed CP. This morphology sequence is consistent with previous experimental observations. It is found that the selectivity of the selective solvent affects the self-assembled microstructure significantly. In particular, when the interaction {\epsilon}BS2 is negative, aggregates of stacked lamellae dominate the diagram. The mechanisms of aggregate transformation and the formation of stacked lamellar aggregates are discussed by analyzing variations of the average contact numbers of the A or B monomers with monomers and with molecules of the two types of solvent, as well as the mean square end-to-end distances of chains. It is found that the basic morphological sequence of spheres to rods to vesicles and the stacked lamellar aggregates result from competition between the interfacial energy and the chain conformational entropy. Analysis of the vesicle structure reveals that the vesicle size increases with increasing CP or with decreasing CS2, but remains almost unchanged with variations in {\epsilon}AS2.

Soft Condensed Matter
Dissipative particle dynamics simulation of the relaxation behaviour of a triblock copolymer supramolecular network

Kohei Wakimoto,Hiroshi Sasaki,Noriyoshi Arai

DOI: https://doi.org/10.1080/08927022.2017.1403027

2017-11-27

Molecular Simulation

Abstract:Since block copolymers self-assemble into various nanostructures and these are widely used in soft materials such as cosmetics and paints, these continue to be the subjects of fundamental studies that progress new technologies. ABA triblock copolymers self-organise into supramolecular networks in which crosslinked structures change upon heating and other external stimulation. Supramolecular networks that consist of ABA triblock copolymers have three components: bridges, loops and dangles. These supramolecular networks have structural regions (clusters) in which end blocks of polymer chains are aggregated and connected by the internal blocks of the polymer chains. Despite of the importance of relaxation behaviour during the measurement and control of polymer materials, the molecular-level behaviour of these systems has not been addressed. We observed pull-out phenomenon that the ends of these polymers detach from clusters, and estimated characteristic detachment times by counting the number of detachments and compared it with the time of longest relaxation in that system.

chemistry, physical,physics, atomic, molecular & chemical
Spinodal Decomposition Induced by Cross-Linking Reaction in A Binary Polymer Mixture

WJ Chen,XL Li,T Dong,M Jiang

DOI: https://doi.org/10.1002/macp.1998.021990303

IF: 2.996

1998-01-01

Macromolecular Chemistry and Physics

Abstract:Phase separation of a binary polymer mixture of poly{styrene-co-[p-2,2,2-trifluoro-1-hydroxy-1-trifluoromethylethyl-α-methylstyrene]} (PS(OH)) and poly[(methyl methacrylate)-co-(glycidyl methacrylate)] (PMMA(G)) upon cross-linking reaction was studied using time-resolved light scattering (TRLS) and optical microscopy. The blends of PS(OH)/PMMA(G), in which PMMA(G) containing 1.4 mol-% epoxy groups can be selectively cross-linked with the multifunctional agent 4,4′-methylenebis(o-chloroaniline) (MOCA) and PS(OH) contains 1.8 mol-% of the strongly proton-donating group C(CF3)2OH, exhibit a lower critical solution temperature (LCST). The cross-linking reaction was carried out for two compositions of PS(OH)/PMMA(G)/MOCA, 50/50/0.7 and 40/60/0.8 (w/w/w), at various temperatures located in the one-phase region between the coexistence curve and the glass transition temperature of the blends. TRLS investigation shows that the phase separation takes place via spinodal decomposition (SD) induced by the increase in the molecular weight of PMMA(G) during the cross-linking reaction. A modulated phase structure with the characteristic features of periodicity and dual connectivity of the phases was developed in this case. The dynamics of SD were investigated in terms of changes of the peak scattering vector qm(t) as a function of time. They are dependent on the reaction temperature and composition. A scaling relation qm(t) ∝︁ t−af(x) describing the behavior of the evolution of phase separation upon reaction was supported by the experiments.

Electrochemistry of potentially bioreductive alkylating quinones Part 1. Electrochemical properties of relatively simple quinones, as model compounds of mitomycin- and aziridinylquinone-type antitumour agents

A Dissipative Particle Dynamics Study on the Compatibilizing Process of Immiscible Polymer Blends with Graft Copolymers

The Phase Behaviors of Cylindrical Diblock Copolymers and Rigid Nanorods' Mixtures

Microphase Transitions of Block Copolymer/nanorod Composites under Shear Flow

Effect of Nanorods on the Mesophase Structure of Diblock Copolymers.

The Effects of Nanoparticles on the Lamellar Phase Separation of Diblock Copolymers

Mono- or Bidisperse Nanorods Mixtures in Diblock Copolymers

Ordered Structures Of Diblock Nanorods Induced By Diblock Copolymers

The dynamic behaviors of diblock copolymer/nanorod mixtures under equilibrium and nonequilibrium conditions

Phase Behaviors of Diblock Copolymer/nanorod Composites under Oscillatory Shear Flow

Photo-induced bond breaking during phase separation kinetics of block copolymer melts: A dissipative particle dynamics study

Mesoscopic Dynamics Simulation of Diblock Copolymer:Morphology and Kinetics

Solvent-Induced Morphology of the Binary Mixture of Diblock Copolymer in Thin Film: the Block Length and Composition Dependence of Morphology

Photomodulated phase-separation kinetics in block copolymer melts: a DPD simulation study

Dissipative Particle Dynamics Simulation for Reaction-Induced Phase Separation of Thermoset/Thermoplastic Blends

Dissociation effect of non-covalent bond for morphological behavior of triblock copolymers: a dissipative particle dynamics study

Photoinduced Morphology Change in Ionic Supramolecular Block Copolymer

Dynamics and order–disorder transitions in bidisperse diblock copolymer blends

Morphological Transformations of Diblock Copolymers in Binary Solvents: A Simulation Study

Dissipative particle dynamics simulation of the relaxation behaviour of a triblock copolymer supramolecular network

Spinodal Decomposition Induced by Cross-Linking Reaction in A Binary Polymer Mixture