Abstract:Batch and column phosphate removal was conducted by a commercially available nano-hydrated ferric oxide composite HFO-201 under varying conditions, and the performance was modeled and predicted with the aid of artificial neural network (ANN) model and response surface methodology (RSM). Initial pH, sulfate concentration, operating temperature, and adsorbent dosage were chosen as four variables for the batch study, while the removal efficiency was considered as the output. A central composite design (CCD) was referred to design 33 sets of batch experiments, and a RSM model was developed to compare with the ANN model. The three-layer feed-forward back-propagation network was established in MATLAB to estimate the phosphate removal efficiency. The positive behavior of both models was verified by Pearson and Spearman coefficient and mean squared error (MSE). Analysis of variance (ANOVA) tests and sensitivity analysis were performed on the models to find relative influence of four variables. Temperature was deemed as the least influential whereas the other three variables were considered significant to the output. Genetic Algorithm (GA) was employed to find optimum dosages for a desired removal efficiency under given conditions. ANN modeling was further attempted to estimate the breakthrough curves of fixed-bed adsorption, where pH, sulfate, temperature, flow rate (BV/h) and bed volume was considered as variables. Predictions made by the developed models were in reasonably good agreement with the test runs. This study suggested that ANN and RSM be considered as effective tools to model and predict trace pollutants removal by nanocomposite adsorbents. (C) 2014 Elsevier B.V. All rights reserved.

ASPAD dynamic simulation and artificial neural network for atenolol adsorption in GGSWAC packed bed column

Modeling Axial Distributions of Adsorbent Particle Size and Local Voidage in Expanded Bed

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

Measurement and modeling of axial distribution of adsorbent particles in expanded bed: taking into account the particle density difference

High-throughput computational screening of porous polymer networks for natural gas sweetening based on neural network

Comparison of general rate model with a new model--artificial neural network model in describing chromatographic kinetics of solanesol adsorption in packed column by macroporous resins.

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

Prediction and Quantifying Parameter Importance in Simultaneous Anaerobic Sulfide and Nitrate Removal Process Using Artificial Neural Network

Continuous silicic acid removal in a fixed-bed column using a modified resin: Experiment investigation and artificial neural network modeling

Adsorption of pharmaceuticals in a fixed-bed column using tyre-based activated carbon: Experimental investigations and numerical modelling

Removal of pesticide in agricultural runoff using granular-activated carbon: a simulation study using a fixed-bed column approach

Insight into mass transfer during adsorption of geniposidic acid onto a fixed-bed column by numerical simulation considering influence of operating conditions on column adsorption performance

Predictive modeling and simulation of wastewater treatment process using nano-based materials: Effect of pH and adsorbent dosage

Reliability of the Mass Transfer Factor Models to Describe the Adsorption of NH4+ by Granular Activated Carbon

Integrated neural network and aspen plus model for entrained flow gasification kinetics investigation

Dynamic Modelling, Simulation, and Sensitive Analysis of Lead Removal in a Fixed-Bed Adsorption Column using Waste-Based Materials

Mathematical modeling of breakthrough curves in dynamic column adsorption: analytical solutions and validation

Application of an effective method in predicting breakthrough curves of fixed-bed adsorption onto resin adsorbent

Modeling Batch and Column Phosphate Removal by Hydrated Ferric Oxide-Based Nanocomposite Using Response Surface Methodology and Artificial Neural Network

Predictive capability evaluation of RSM and ANN models in adsorptive treatment of crystal violet dye simulated wastewater using activated carbon prepared from Raphia hookeri seeds

The use of artificial neural network (ANN) for modeling adsorption of sunset yellow onto neodymium modified ordered mesoporous carbon