Approaches to program comprehension

D. Robson,K. Bennett,B. Cornelius,M. Munro

DOI: https://doi.org/10.1016/0164-1212(91)90092-K

IF: 3.5

1991-02-01

Journal of Systems and Software

Abstract:

What problem does this paper attempt to address?

A six degrees-of-freedom cable-driven robotic platform for head–neck movement

Ian Bales,Haohan Zhang

DOI: https://doi.org/10.1038/s41598-024-59349-0

IF: 4.6

2024-04-17

Scientific Reports

Abstract:This paper introduces a novel cable-driven robotic platform that enables six degrees-of-freedom (DoF) natural head–neck movements. Poor postural control of the head–neck can be a debilitating symptom of neurological disorders such as amyotrophic lateral sclerosis and cerebral palsy. Current treatments using static neck collars are inadequate, and there is a need to develop new devices to empower movements and facilitate physical rehabilitation of the head–neck. State-of-the-art neck exoskeletons using lower DoF mechanisms with rigid linkages are limited by their hard motion constraints imposed on head–neck movements. By contrast, the cable-driven robot presented in this paper does not constrain motion and enables wide-range, 6-DoF control of the head–neck. We present the mechatronic design, validation, and control implementations of this robot, as well as a human experiment to demonstrate a potential use case of this versatile robot for rehabilitation. Participants were engaged in a target reaching task while the robot applied both assistive and resistive moments on the head during the task. Our results show that neck muscle activation increased by 19% when moving the head against resistance and decreased by 28–43% when assisted by the robot. Overall, these results provide a scientific justification for further research in enabling movement and identifying personalized rehabilitation for motor training. Beyond rehabilitation, other applications such as applying force perturbations on the head to study sensory integration and applying traction to achieve pain relief may benefit from the innovation of this robotic platform which is capable of applying controlled 6-DoF forces/moments on the head.

multidisciplinary sciences
Non-invasive Cognitive-level Human Interfacing for the Robotic Restoration of Reaching & Grasping

Ali Shafti,A. Aldo Faisal

DOI: https://doi.org/10.1109/ner49283.2021.9441453

2021-05-04

Abstract:Assistive and Wearable Robotics have the potential to support humans with different types of motor impairments to become independent and fulfil their activities of daily living successfully. The success of these robot systems, however, relies on the ability to meaningfully decode human action intentions and carry them out appropriately. Neural interfaces have been explored for use in such system with several successes, however, they tend to be invasive and require training periods in the order of months. We present a robotic system for human augmentation, capable of actuating the user's arm and fingers for them, effectively restoring the capability of reaching, grasping and manipulating objects; controlled solely through the user's eye movements. We combine wearable eye tracking, the visual context of the environment and the structural grammar of human actions to create a cognitive-level assistive robotic setup that enables the users in fulfilling activities of daily living, while conserving interpretability, and the agency of the user. The interface is worn, calibrated and ready to use within 5 minutes. Users learn to control and make successful use of the system with an additional 5 minutes of interaction. The system is tested with 5 healthy participants, showing an average success rate of 96.6% on first attempt across 6 tasks.
Sensing and Control of a Multi-Joint Soft Wearable Robot for Upper-Limb Assistance and Rehabilitation

Tommaso Proietti,Cameron J. Hohimer,Kristin Nuckols,Megan E. Clarke,Yu Meng Zhou,David J. Lin,Conor J. Walsh,Ciaran O'Neill

DOI: https://doi.org/10.1109/lra.2021.3061061

IF: 5.2

2021-04-01

IEEE Robotics and Automation Letters

Abstract:In the field of wearable robotics, there has been increased interest in the creation of soft wearable robots to provide assistance and rehabilitation for those with physical impairments. Compared to traditional robots, these devices have the potential to be fully portable and lightweight, a flexibility that may allow for increased utilization time as well as enable use outside of a clinical environment. In this letter, we present a textile-based multi-joint soft wearable robot to assist the upper limb, in particular shoulder elevation and elbow extension. Before developing a portable fluidic supply system, we leverage an off-board actuation system for power and control, with the worn components weighting less than half kilogram. We showed that this robot can be mechanically transparent when powered off, not restricting users from performing movements associated with activities of daily living. Three IMUs were placed on the torso, upper arm and forearm to measure the shoulder and elbow kinematics. We found an average RMSE of $sim!5$ degrees when compared to an optical motion capture system. We implemented dynamic Gravity Compensation (GC) and Joint Trajectory Tracking (JTT) controllers that actively modulated actuator pressure in response to IMU readings. The controller performances were evaluated in a study with eight healthy individuals. Using the GC controller, subject shoulder muscle activity decreased with increasing magnitude of assistance and for the JTT controller, we obtained low tracking errors (mean $sim!6$ degrees RMSE). Future work will evaluate the potential of the robot to assist with activities in post-stroke rehabilitation.

robotics
User-Driven Functional Movement Training With a Wearable Hand Robot After Stroke

Sangwoo Park,Michaela Fraser,Lynne M. Weber,Cassie Meeker,Lauri Bishop,Daniel Geller,Joel Stein,Matei Ciocarlie

DOI: https://doi.org/10.1109/tnsre.2020.3021691

IF: 4.9

2020-10-01

IEEE Transactions on Neural Systems and Rehabilitation Engineering

Abstract:We studied the performance of a robotic orthosis designed to assist the paretic hand after stroke. It is wearable and fully user-controlled, serving two possible roles: as a therapeutic tool that facilitates device-mediated hand exercises to recover neuromuscular function or as an assistive device for use in everyday activities to aid functional use of the hand. We present the clinical outcomes of a pilot study designed as a feasibility test for these hypotheses. 11 chronic stroke (>2 years) patients with moderate muscle tone (Modified Ashworth Scale $leq 2$ in upper extremity) engaged in a month-long training protocol using the orthosis. Individuals were evaluated using standardized outcome measures, both with and without orthosis assistance. Fugl-Meyer post intervention scores without robotic assistance showed improvement focused specifically at the distal joints of the upper limb, suggesting the use of the orthosis as a rehabilitative device for the hand. Action Research Arm Test scores post intervention with robotic assistance showed that the device may serve an assistive role in grasping tasks. These results highlight the potential for wearable and user-driven robotic hand orthoses to extend the use and training of the affected upper limb after stroke.

engineering, biomedical,rehabilitation
Preliminary Study on Effects of Neck Exoskeleton Structural Design in Patients With Amyotrophic Lateral Sclerosis

David Demaree,Joseph Brignone,Mark Bromberg,Haohan Zhang

DOI: https://doi.org/10.1109/tnsre.2024.3397584

IF: 4.9

2024-05-17

IEEE Transactions on Neural Systems and Rehabilitation Engineering

Abstract:Neck muscle weakness due to amyotrophic lateral sclerosis (ALS) can result in dropped head syndrome, adversely impacting the quality of life of those affected. Static neck collars are currently prescribed to hold the head in a fixed upright position. However, these braces are uncomfortable and do not allow any voluntary head-neck movements. By contrast, powered neck exoskeletons have the potential to enable head-neck movements. Our group has recently improved the mechanical structure of a state-of-the-art neck exoskeleton through a weighted optimization. To evaluate the effect of the structural changes, we conducted an experiment in which patients with ALS were asked to perform head-neck tracking tasks while using the two versions of the neck exoskeleton. We found that the neck muscle activation was significantly reduced when assisted by the structurally enhanced design compared to no assistance provided. The improved structure also improved kinematics tracking performance, allowing users to better achieve the desired head poses. In comparison, the previous design did not help reduce the muscle effort required to perform these tasks and even slightly worsened the kinematic tracking performance. It was also found that biomechanical benefits gained from using the structurally improved design were consistent across participants with both mild and severe neck weakness. Furthermore, we observed that participants preferred to use the powered neck exoskeletons to voluntarily move their heads and make eye contact during a conversation task rather than remain in a fixed upright position. Each of these findings highlights the importance of the structural design of neck exoskeletons in achieving desired biomechanical benefits and suggests that neck exoskeletons can be a viable method to improve the daily life of patients with ALS.

engineering, biomedical,rehabilitation
BCI controlled robotic arm as assistance to the rehabilitation of neurologically disabled patients

Anthony Casey,Hannan Azhar,Marek Grzes,Mohamed Sakel

DOI: https://doi.org/10.1080/17483107.2019.1683239

2019-11-11

Abstract:Purpose: Brain–computer interface (BCI)-controlled assistive robotic systems have been developed with increasing success with the aim to rehabilitation of patients after brain injury to increase independence and quality of life. While such systems may use surgically implanted invasive sensors, non-invasive alternatives can be better suited due to the ease of use, reduced cost, improvements in accuracy and reliability with the advancement of the technology and practicality of use. The consumer-grade BCI devices are often capable of integrating multiple types of signals, including Electroencephalogram (EEG) and Electromyogram (EMG) signals.Materials and Methods: This paper summarizes the development of a portable and cost-efficient BCI-controlled assistive technology using a non-invasive BCI headset "OpenBCI" and an open source robotic arm, U-Arm, to accomplish tasks related to rehabilitation, such as access to resources, adaptability or home use. The resulting system used a combination of EEG and EMG sensor readings to control the arm. To avoid risks of injury while the device is being used in clinical settings, appropriate measures were incorporated into the software control of the arm. A short survey was used following the system usability scale (SUS), to measure the usability of the technology to be trialed in clinical settings.Results: From the experimental results, it was found that EMG is a very reliable method for assistive technology control, provided that the user specific EMG calibration is done. With the EEG, even though the results were promising, due to insufficient detection of the signal, the controller was not adequate to be used within a neurorehabilitation environment. The survey indicated that the usability of the system is not a barrier for moving the system into clinical trials.For the rehabilitation of patients suffering from neurological disabilities (particularly those suffering from varying degrees of paralysis), it is necessary to develop technology that bypasses the limitations of their condition. For example, if a patient is unable to walk due to the unresponsiveness in their motor neurons, technology can be developed that used an alternate input to move an exoskeleton, which enables the patient to walk again with the assistance of the exoskeleton.This research focuses on neuro-rehabilitation within the framework of the NHS at the Kent and Canterbury Hospital in UK. The hospital currently does not have any system in place for self-driven rehabilitation and instead relies on traditional rehabilitation methods through assistance from physicians and exercise regimens to maintain muscle movement.This paper summarises the development of a portable and cost-efficient BCI controlled assistive technology using a non-invasive BCI headset "OpenBCI" and an open source robotic arm, U-Arm, to accomplish tasks related to rehabilitation, such as access to resources, adaptability or home use. The resulting system used a combination of EEG and EMG sensor readings to control the arm, which could perform a number of different tasks such as picking/placing objects or assist users in eating.
Wearable Supernumerary Robotic Limb System Using a Hybrid Control Approach Based on Motor Imagery and Object Detection

Zhichuan Tang,Lingtao Zhang,Xin Chen,Jichen Ying,Xinyang Wang,Hang Wang

DOI: https://doi.org/10.1109/tnsre.2022.3172974

IF: 4.9

2022-06-01

IEEE Transactions on Neural Systems and Rehabilitation Engineering

Abstract:Motor disorder of upper limbs has seriously affected the daily life of the patients with hemiplegia after stroke. We developed a wearable supernumerary robotic limb (SRL) system using a hybrid control approach based on motor imagery (MI) and object detection for upper-limb motion assistance. SRL system included an SRL hardware subsystem and a hybrid control software subsystem. The system obtained the patient's motion intention through MI electroencephalogram (EEG) recognition method based on graph convolutional network (GCN) and gated recurrent unit network (GRU) to control the left and right movements of SRL, and the object detection technology was used together for a quick grasp of target objects to compensate for the disadvantages when using MI EEG alone like fewer control instructions and lower control efficiency. Offline training experiment was designed to obtain subjects' MI recognition models and evaluate the feasibility of the MI EEG recognition method; online control experiment was designed to verify the effectiveness of our wearable SRL system. The results showed that the proposed MI EEG recognition method (GCN+GRU) could effectively improve the MI classification accuracy (90.04% %) compared with traditional methods; all subjects were able to complete the target object grasping tasks within 23 seconds by controlling the SRL, and the highest average grasping success rate achieved 90.67% in bag grasping task. The SRL system can effectively assist people with upper-limb motor disorder to perform upper-limb tasks in daily life by natural human-robot interaction, and improve their ability of self-help and enhance their confidence of life.

engineering, biomedical,rehabilitation
Design and analysis of a compatible exoskeleton rehabilitation robot system based on upper limb movement mechanism

Yuansheng Ning,Hongbo Wang,Ying Liu,Qi Wang,Yu Rong,Jianye Niu

DOI: https://doi.org/10.1007/s11517-023-02974-0

2023-12-13

Medical & Biological Engineering & Computing

Abstract:Rehabilitation robots are used to promote structural and functional recovery of the nervous system with repetitive, task-oriented training and have been gradually applied to clinical rehabilitation training. This paper proposes an upper limb exoskeleton rehabilitation robot system that could realize shoulder-elbow-wrist joint rehabilitation training. Firstly, a motion equivalent model was established based on the upper limb movement mechanism, the robot mechanism configuration was designed, and the optimization algorithm and spatial mechanism theory were used to optimize and analyze the structural parameters and human–machine compatibility of the robot, which will guide the design of the robot's model. Then, the robot kinematics were solved, and its maximum motion range, dexterity distribution, and daily motion trajectory were simulated. Finally, a system prototype was built to test the maximum range of robot-assisted human upper limb training by laser tracker, while the pressure of human–machine interaction during training was captured and analyzed by flexible sensors. The results show that the proposed rehabilitation robot could nearly completely cover the range of motion of upper limb joints and meet the needs of trajectory training, and the linear velocity dexterity and angular velocity dexterity in the motion space are maximum 0.55 and 0.89, and the human–machine interaction pressures during the training process are all less than 10 kPa. Besides, this paper also conducted a system evaluation based on the fuzzy comprehensive evaluation model, and the evaluation result was 0.39, with an excellent evaluation grade, it indirectly indicates that the robot's overall performance was good.

engineering, biomedical,computer science, interdisciplinary applications,mathematical & computational biology,medical informatics
A Novel Robot Neurorehabilitation for Upper Limb Motion

Zhang Xiu-feng,Ji Lin-hong,Guo Li-yun

DOI: https://doi.org/10.1109/iembs.2005.1615608

2005-01-01

Abstract:Our goal is to apply robotics and automation technology to assist, quantify, enhance, and verify neuro-rehabilitation. In this paper a novel robot neuro-rehabilitation for upper limb, with many merits, is developed. Mechanism and control of the robot are introduced in detail. By a clinical trial involving 30 stroke patients with three months at Rehabilitation Center of China, some results are obtained 1) robot-aided therapy does not have adverse effects, 2) patients can accept the procedure, 3) the therapy may reduce muscular tension, and 4) manipulation of the impaired upper limb may influence brain recovery. Some new ideas are also presented to make rehabilitation therapy more effectively. These ideas will be helpful to further quicken the development of the robot neuro-rehabilitation
Soft Wearable Robot With Shape Memory Alloy (SMA)-Based Artificial Muscle for Assisting With Elbow Flexion and Forearm Supination/Pronation

Jaeyeon Jeong,Kyujin Hyeon,Seung-Yeon Jang,Chongyoung Chung,Sajjad Hussain,So-Young Ahn,Soo-Kyung Bok,Ki-Uk Kyung

DOI: https://doi.org/10.1109/lra.2022.3161700

IF: 5.2

2022-07-01

IEEE Robotics and Automation Letters

Abstract:This letter proposes a soft wearable robot with shape memory alloy (SMA)-based artificial muscle to assist with upper limb motion. The SMA-based artificial muscle was designed by embedding a bundle of SMA coil springs into a stretchable coolant vessel, which allows active cooling of the SMA bundles through coolant circulation. By attaching SMA-based artificial muscles to a soft wearable brace, a soft wearable robot was designed to assist elbow flexion and forearm supinationpronation. To support the activities of daily living (ADLs), the proposed robot can produce more than 3 Nm torque in the direction of elbow flexion. In addition, the proposed robot can increase the forearm supinationpronation ROM by an average of 15.7 for impaired users. Finally, to evaluate the effect of the assistance provided by the proposed system, experiments and system usability scale (SUS) assessments were conducted on a group of patients with stroke and spinal cord injuries (SCI). The results indicate that the robot improves not only the range of motion (ROM) but also the torque produced by the users. In addition, from the results of the user experiment, we found certain design issues that require further development for better performance of the robot.

robotics
Artificial Muscle Intelligence System With Deep Learning for Post-Stroke Assistance and Rehabilitation

L. Mostarda,Sunil Jacob,Varun G. Menon,Vinoj P. G.,F. Al-turjman

DOI: https://doi.org/10.1109/ACCESS.2019.2941491

IF: 3.9

2019-09-16

IEEE Access

Abstract:Stroke is one of the prime reasons for paralysis throughout the world caused due to impaired nervous system and resulting in disability to move the affected body parts. Rehabilitation is the natural remedy for recovering from paralysis and enhancing the quality of life. Brain Computer Interface (BCI) controlled assistive technology is the new paradigm, providing assistance and rehabilitation for the paralysed. But, most of these devices are error prone and also hard to get continuous control because of the dynamic nature of the brain signals. Moreover, existing devices like exoskeletons brings additional burden on the patient and the caregivers and also results in mental fatigue and frustration. To solve these issues Artificial Muscle Intelligence with Deep Learning (AMIDL) system is proposed in this paper. AMIDL integrates user intentions with artificial muscle movements in an efficient way to improve the performance. Human thoughts captured using Electroencephalogram (EEG) sensors are transformed into body movements, by utilising microcontroller and Transcutaneous Electrical Nerve Stimulation (TENS) device. EEG signals are subjected to pre-processing, feature extraction and classification, before being passed on to the affected body part. The received EEG signal is correlated with the recorded artificial muscle movements. If the captured EEG signal falls below the desired level, the affected body part will be stimulated by the recorded artificial muscle movements. The system also provides a feature for communicating human intentions as alert message to caregivers, in case of emergency situations. This is achieved by offline training of specific gesture and online gesture recognition algorithm. The recognised gesture is transformed into speech, thus enabling the paralysed to express their feelings to the relatives or friends. Experiments were carried out with the aid of healthy and paralysed subjects. The AMIDL system helped to reduce mental fatigue, miss-operation, frustration and provided continuous control. The thrust of lifting the exoskeleton is also reduced by using light weight wireless electrodes. The proposed system will be a great communication aid for paralysed to express their thoughts and feelings with dear and near ones, thereby enhancing the quality of life.

Medicine,Engineering,Computer Science
A robot-based hybrid lower limb system for Assist-As-Needed rehabilitation of stroke patients: Technical evaluation and clinical feasibility

Kasper S. Leerskov,Cindy J.H. Rikhof,Erika G. Spaich,Strahinja Dosen,Gerdienke B. Prange-Lasonder,Erik C. Prinsen,Johan S. Rietman,Lotte N.S. Andreasen Struijk

DOI: https://doi.org/10.1016/j.compbiomed.2024.108839

IF: 7.7

2024-07-15

Computers in Biology and Medicine

Abstract:Background: Although early rehabilitation is important following a stroke, severely affected patients have limited options for intensive rehabilitation as they are often bedridden. To create a system for early rehabilitation of lower extremities in these patients, we combined the robotic manipulator ROBERT® with electromyography (EMG)-triggered functional electrical stimulation (FES) and developed a novel user-driven Assist-As-Needed (AAN) control. The method is based on a state machine able to detect user movement capability, assessed by the presence of an EMG-trigger and the movement velocity, and provide different levels of assistance as required by the patient (no support, FES only, and simultaneous FES and mechanical assistance). Methods: To technically validate the system, we tested 10 able-bodied participants who were instructed to perform specific behaviors to test the system states while conducting knee extension and ankle dorsal flexion exercises. The system was also tested on two stroke patients to establish its clinical feasibility. Results: The technical validation showed that the state machine correctly detected the participants' behavior and activated the target AAN state in more than 96% of the exercise repetitions. The clinical feasibility test showed that the system successfully recognized the patients' movement capacity and activated assistive states according to their needs providing the minimal level of support required to exercise successfully. Conclusions: The system was technically validated and preliminarily proved clinically feasible. The present study shows that the novel system can be used to deliver exercises with a high number of repetitions while engaging the participants' residual capabilities through the AAN strategy.

computer science, interdisciplinary applications,engineering, biomedical,biology,mathematical & computational biology
Development and Electromyographic Validation of a Compliant Human-Robot Interaction Controller for Cooperative and Personalized Neurorehabilitation

Stefano Dalla Gasperina,Valeria Longatelli,Francesco Braghin,Alessandra Pedrocchi,Marta Gandolla

DOI: https://doi.org/10.3389/fnbot.2021.734130

IF: 3.493

2022-01-18

Frontiers in Neurorobotics

Abstract:Background Appropriate training modalities for post-stroke upper-limb rehabilitation are key features for effective recovery after the acute event. This study presents a cooperative control framework that promotes compliant motion and implements a variety of high-level rehabilitation modalities with a unified low-level explicit impedance control law. The core idea is that we can change the haptic behavior perceived by a human when interacting with the rehabilitation robot by tuning three impedance control parameters. Methods The presented control law is based on an impedance controller with direct torque measurement, provided with positive-feedback compensation terms for disturbances rejection and gravity compensation. We developed an elbow flexion-extension experimental setup as a platform to validate the performance of the proposed controller to promote the desired high-level behavior. The controller was first characterized through experimental trials regarding joint transparency, torque, and impedance tracking accuracy. Then, to validate if the controller could effectively render different physical human-robot interaction according to the selected rehabilitation modalities, we conducted tests on 14 healthy volunteers and measured their muscular voluntary effort through surface electromyography (sEMG). The experiments consisted of one degree-of-freedom elbow flexion/extension movements, executed under six high-level modalities, characterized by different levels of (i) corrective assistance, (ii) weight counterbalance assistance, and (iii) resistance. Results The unified controller demonstrated suitability to promote good transparency and render both compliant and stiff behavior at the joint. We demonstrated through electromyographic monitoring that a proper combination of stiffness, damping, and weight assistance could induce different user participation levels, render different physical human-robot interaction, and potentially promote different rehabilitation training modalities. Conclusion We proved that the proposed control framework could render a wide variety of physical human-robot interaction, helping the user to accomplish the task while exploiting physiological muscular activation patterns. The reported results confirmed that the control scheme could induce different levels of the subject's participation, potentially applicable to the clinical practice to adapt the rehabilitation treatment to the subject's progress. Further investigation is needed to validate the presented approach to neurological patients.

robotics,computer science, artificial intelligence,neurosciences
Wearable neck assistive device strain evaluation study on surface neck muscles for head/neck movements

Pavan Kalyan Lingampally,Arockia Selvakumar Arockia Doss,Vikram Reddy Kadiyam

DOI: https://doi.org/10.3233/THC-220101

Abstract:Background: This article examines a dynamic wearable assistive device for individuals suffering from pain in the neck. As a part of the clinical treatment, static braces/cervical collars are suggested, however, these collars aid the person in maintaining the upright position of the head but restrict the head motion to a single configuration. To address this problem, a dynamic wearable assistive cervical collar is fabricated based on human anatomical head/neck data. Objective: The objective of this study is to observe the strain acting on the neck surface muscles for bending and compression neck movements with and without the neck brace using a strain sensor. Methods: To evaluate the performance of this device, experimental trials were conducted on test subjects to find out the angular tilt of the head with the device worn using the cervical range of motion (CROM) device. In addition, a neck surface muscle strain study is also conducted using strain sensors to investigate the strain produced while using the wearable assistive device. The strain on the neck surface muscle is measured using NI-9236 strain DAQ (data acquisition system). In this experimental study, a group of aged individuals with minor neck pain were recruited to study the head/neck movements. Results: It was found that by using the proposed assistive device, test subjects were able to mimic 65% of human head/neck movements like flexion, extension, lateral bending, and rotation, and the strain generated from the neck surface muscle was minimal. Conclusion: The results show that using the designed assistive device reduced the strain on neck surface muscle, and strain obtained is within the range of 40 × 10-6 to 80 × 10-6, and may aid in recovery of the individuals suffering with neck pain.
Evaluation of a novel real-time adaptive assist-as-needed controller for robot-assisted upper extremity rehabilitation following stroke

Ana P Arantes,Nadja Bressan,Ludymila R Borges,Chris A McGibbon

DOI: https://doi.org/10.1371/journal.pone.0292627

IF: 3.7

2023-10-11

PLoS ONE

Abstract:Rehabilitation therapy plays an essential role in assisting people with stroke regain arm function. Upper extremity robot therapy offers a number of advantages over manual therapies, but can suffer from slacking behavior, where the user lets the robot guide their movements even when they are capable of doing so by themselves, representing a major barrier to reaching the full potential of robot-assist rehabilitation. This is a pilot clinical study that investigates the use of an electromyography-based adaptive assist-as-needed controller to avoid slacking behavior during robotic rehabilitation for people with stroke. The study involved a convenience sample of five individuals with chronic stroke who underwent a robot therapy program utilizing horizontal arm tasks. The Fugl-Meyer assessment (FM) was used to document motor impairment status at baseline. Velocity, time, and position were quantified as performance parameters during the training. Arm and shoulder surface electromyography (EMG) and electroencephalography (EEG) were used to assess the controller's performance. The cross-sectional results showed strong second-order relationships between FM score and outcome measures, where performance metrics (path length and accuracy) were sensitive to change in participants with lower functional status. In comparison, speed, EMG and EEG metrics were more sensitive to change in participants with higher functional status. EEG signal amplitude increased when the robot suggested that the robot was inducing a challenge during the training tasks. This study highlights the importance of multi-sensor integration to monitor and improve upper-extremity robotic therapy.
NeuroSuitUp: System Architecture and Validation of a Motor Rehabilitation Wearable Robotics and Serious Game Platform

Konstantinos Mitsopoulos,Vasiliki Fiska,Konstantinos Tagaras,Athanasios Papias,Panagiotis Antoniou,Konstantinos Nizamis,Konstantinos Kasimis,Paschalina-Danai Sarra,Diamanto Mylopoulou,Theodore Savvidis,Apostolos Praftsiotis,Athanasios Arvanitidis,George Lyssas,Konstantinos Chasapis,Alexandros Moraitopoulos,Alexander Astaras,Panagiotis D Bamidis,Alkinoos Athanasiou

DOI: https://doi.org/10.3390/s23063281

2023-03-20

Abstract:Background: This article presents the system architecture and validation of the NeuroSuitUp body-machine interface (BMI). The platform consists of wearable robotics jacket and gloves in combination with a serious game application for self-paced neurorehabilitation in spinal cord injury and chronic stroke. Methods: The wearable robotics implement a sensor layer, to approximate kinematic chain segment orientation, and an actuation layer. Sensors consist of commercial magnetic, angular rate and gravity (MARG), surface electromyography (sEMG), and flex sensors, while actuation is achieved through electrical muscle stimulation (EMS) and pneumatic actuators. On-board electronics connect to a Robot Operating System environment-based parser/controller and to a Unity-based live avatar representation game. BMI subsystems validation was performed using exercises through a Stereoscopic camera Computer Vision approach for the jacket and through multiple grip activities for the glove. Ten healthy subjects participated in system validation trials, performing three arm and three hand exercises (each 10 motor task trials) and completing user experience questionnaires. Results: Acceptable correlation was observed in 23/30 arm exercises performed with the jacket. No significant differences in glove sensor data during actuation state were observed. No difficulty to use, discomfort, or negative robotics perception were reported. Conclusions: Subsequent design improvements will implement additional absolute orientation sensors, MARG/EMG based biofeedback to the game, improved immersion through Augmented Reality and improvements towards system robustness.
Biomechanics Aware Collaborative Robot System for Delivery of Safe Physical Therapy in Shoulder Rehabilitation

J. Micah Prendergast,Stephan Balvert,Tom Driessen,Ajay Seth,Luka Peternel,Joseph Micah Prendergast

DOI: https://doi.org/10.1109/lra.2021.3097375

IF: 5.2

2021-10-01

IEEE Robotics and Automation Letters

Abstract:In this work, we explore using computational musculoskeletal modeling to equip an industrial collaborative robot with awareness of the internal state of a patient to safely deliver physical therapy. A major concern of robot-mediated physical therapy is that robots may unwittingly injure patients. For patients with shoulder injuries this typically means the risk of tearing a rotator-cuff muscle tendon. Risk of reinjury hampers both human and robot therapists and it is the main reason for conservative physical therapy. Advances in human musculoskeletal modeling, however, can equip robots with additional perception of potential reinjury risks. While the ultimate goal is to improve the safety, range-of-motion and activity that patients receive through robot-mediated therapy, the aim of this letter is to develop and test a framework that enables the robot to understand the state of the patient and to execute physical therapy movements that demonstrate low injury risk and achieve a large range-of-motion in human subjects. We build on prior work in human-robot interaction via impedance control, but take robot awareness of the human to the next level by including and manipulating a musculoskeletal model in parallel to the patient. Taking the most common shoulder impairments (i.e., rotator-cuff tears) as an example, we demonstrate planned, model-based trajectories that minimize strain in these muscles and corresponding robot-mediated movements on healthy subjects. Our experiments suggest that musculoskeletal awareness is a promising approach to plan and deliver therapeutic movements that are safe and effective via an industrial robot.

robotics
Application of Artificial Neuromolecular System in Robotic Arm Control to Assist Progressive Rehabilitation for Upper Extremity Stroke Patients

Jong-Chen Chen,Hao-Ming Cheng

DOI: https://doi.org/10.3390/act13090362

IF: 2.6

2024-09-17

Actuators

Abstract:Freedom of movement of the hands is the most desired hope of stroke patients. However, stroke recovery is a long, long road for many patients. If artificial intelligence can assist human arm movement, the possibility of stroke patients returning to normal hand movement might be significantly increased. This study uses the artificial neuromolecular system (ANM system) developed in our laboratory as the core of motion control, in an attempt to learn to control the mechanical arm to produce actions similar to human rehabilitation training and the transition between different activities. This research adopts two methods. The first is hypothetical exploration, the so-called "artificial world" simulation method. The detailed approach uses the V-REP (Virtual Robot Experimentation Platform) to conduct different experimental runs to capture relevant data. Our policy is to establish an action database systematically to a certain extent. From these data, we use the ANM system with self-organization and learning capabilities to develop the relationship between these actions and establish the possibility of conversion between different activities. The second method of this study is to use the data from a hospital in Toronto, Canada. Our experimental results show that the ANM system can continuously learn for problem-solving. In addition, our three experimental results of adaptive learning, transfer learning, and cross-task learning further confirm that the ANM system can use previously learned systems to complete the delivered tasks through autonomous learning (instead of learning from scratch).

engineering, mechanical,instruments & instrumentation
HAT: Head-Worn Assistive Teleoperation of Mobile Manipulators

Akhil Padmanabha,Qin Wang,Daphne Han,Jashkumar Diyora,Kriti Kacker,Hamza Khalid,Liang-Jung Chen,Carmel Majidi,Zackory Erickson

DOI: https://doi.org/10.48550/arXiv.2209.13097

IF: 3.7

2022-09-27

Robotics

Abstract:Mobile manipulators in the home can provide increased autonomy to individuals with severe motor impairments, who often cannot complete activities of daily living (ADLs) without the help of a caregiver. Teleoperation of an assistive mobile manipulator could enable an individual with motor impairments to independently perform self-care and household tasks, yet limited motor function can impede one's ability to interface with a robot. In this work, we present a unique inertial-based wearable assistive interface, embedded in a familiar head-worn garment, for individuals with severe motor impairments to teleoperate and perform physical tasks with a mobile manipulator. We evaluate this wearable interface with both able-bodied (N = 16) and individuals with motor impairments (N = 2) for performing ADLs and everyday household tasks. Our results show that the wearable interface enabled participants to complete physical tasks with low error rates, high perceived ease of use, and low workload measures. Overall, this inertial-based wearable serves as a new assistive interface option for control of mobile manipulators in the home.
Enhancing Upper Limb Function and Motor Skills Post-Stroke Through an Upper Limb Rehabilitation Robot

Tianfang Zhang,Zhao Yao,Fenfen Chen,Jie Wang,Weiyi Shi,Jinjin Zheng,Ziwei Zhang,Zuobing Chen

DOI: https://doi.org/10.3791/66938

2024-09-06

Abstract:Cerebrovascular accidents, commonly known as strokes, represent a prevalent neurological event leading to significant upper limb disabilities, thereby profoundly affecting individuals' activities of daily living and diminishing their quality of life. Traditional rehabilitation methods for upper limb recovery post-stroke are often hindered by limitations, including therapist and patient fatigue, reliance on singular training methodologies, and lack of sustained motivation. Addressing these challenges, this study introduces an upper limb rehabilitation robot, which uses intelligent feedback motion control to improve therapeutic outcomes. The system is distinguished by its capability to adjust the direction and magnitude of force feedback dynamically, based on the detection of spastic movements during exercises, thereby offering a tailored therapeutic experience. This system is equipped with four distinct training modes, intelligent assessment of joint range of motion, and the ability to personalize training programs. Moreover, it provides an immersive interactive gaming experience coupled with comprehensive safety measures. This multifaceted approach not only elevates the engagement and interest of participants beyond traditional rehabilitation protocols but also demonstrates significant improvements in upper limb functionality and the activities of daily living among hemiplegic patients. The system exemplifies an advanced tool in upper limb rehabilitation, offering a synergistic blend of precision, personalization, and interactive engagement, thereby broadening the therapeutic options available to stroke survivors.

Approaches to program comprehension

A six degrees-of-freedom cable-driven robotic platform for head–neck movement

Non-invasive Cognitive-level Human Interfacing for the Robotic Restoration of Reaching & Grasping

Sensing and Control of a Multi-Joint Soft Wearable Robot for Upper-Limb Assistance and Rehabilitation

User-Driven Functional Movement Training With a Wearable Hand Robot After Stroke

Preliminary Study on Effects of Neck Exoskeleton Structural Design in Patients With Amyotrophic Lateral Sclerosis

BCI controlled robotic arm as assistance to the rehabilitation of neurologically disabled patients

Wearable Supernumerary Robotic Limb System Using a Hybrid Control Approach Based on Motor Imagery and Object Detection

Design and analysis of a compatible exoskeleton rehabilitation robot system based on upper limb movement mechanism

A Novel Robot Neurorehabilitation for Upper Limb Motion

Soft Wearable Robot With Shape Memory Alloy (SMA)-Based Artificial Muscle for Assisting With Elbow Flexion and Forearm Supination/Pronation

Artificial Muscle Intelligence System With Deep Learning for Post-Stroke Assistance and Rehabilitation

A robot-based hybrid lower limb system for Assist-As-Needed rehabilitation of stroke patients: Technical evaluation and clinical feasibility

Development and Electromyographic Validation of a Compliant Human-Robot Interaction Controller for Cooperative and Personalized Neurorehabilitation

Wearable neck assistive device strain evaluation study on surface neck muscles for head/neck movements

Evaluation of a novel real-time adaptive assist-as-needed controller for robot-assisted upper extremity rehabilitation following stroke

NeuroSuitUp: System Architecture and Validation of a Motor Rehabilitation Wearable Robotics and Serious Game Platform

Biomechanics Aware Collaborative Robot System for Delivery of Safe Physical Therapy in Shoulder Rehabilitation

Application of Artificial Neuromolecular System in Robotic Arm Control to Assist Progressive Rehabilitation for Upper Extremity Stroke Patients

HAT: Head-Worn Assistive Teleoperation of Mobile Manipulators

Enhancing Upper Limb Function and Motor Skills Post-Stroke Through an Upper Limb Rehabilitation Robot