Abstract:Hydrogen production from water, a key element in the renewable energy portfolio, offers a solution to reduce reliance on fossil fuels. Photoelectrochemical (PEC) hydrogen production, using light-absorbing semiconductors and catalysts, offers a clean and cost-effective method for harnessing solar energy. To enhance the efficiency of PEC, this study explores the use of anatase TiO 2 thin film photoelectrodes as an alternative to expensive and rare catalysts, aiming to generate hydrogen as a clean fuel with oxygen as a byproduct. Anatase titanium dioxide is a well-established functional material widely applied in the fields of environment and energy. Recognized as one of the premier materials for photocatalysis and a promising photoanode material for water splitting, titanium dioxide (TiO 2 ) finds use in diverse applications such as dye-sensitized solar cells, perovskite-based solar cells, and cleaning devices. Its band gap of 3.2 eV, stability, strong absorption in the UV region, and energetics of the valence and conduction band edges make anatase particularly suitable for PEC water splitting, especially for the oxygen evolution reaction (OER). Our research focuses on the development of anatase thin films with strong [001] texture and (001) facets at the surface of the film. The (001) facets are known to accumulate photogenerated hole states while the [001] orientation imparts a negative flat band potential. We hypothesize that these two properties, (001) facets and [001] texture, are ideal for OER. This study combines these two structural characteristics within the semiconductor TiO2 layer to enhance PEC performance and maximize the efficiency of hole collection during water oxidation. Anatase TiO2 thin films with (001) facets and [001] orientation were hydrothermally synthesized on a fluorine-doped tin oxide (FTO) substrate and annealed at 500°C. The films exhibited [001] orientation and (001) faceting as shown by grazing incidence X-ray diffraction (GI-XRD), atomic force microscopy (AFM), and scanning electron microscopy (SEM). Photoelectrochemical measurements via cyclic voltammetry in a 0.1 M KOH and Na 2 SO 3 solution demonstrated the films' hole collection efficiency under a 365 nm UV light source. The photoelectrochemical (PEC) and oxygen evolution reaction (OER) characteristics of anatase thin films were observed both under dark and light conditions. Prior to illumination, only the Ti 3+ /Ti 4+ redox couple was observed with an onset potential of 0.01 V (RHE) and negligible OER at anodic potentials. When UV irradiated, the TiO 2 thin films exhibited a photocurrent that increased through the anodic scan. The onset potential of photocurrent, measured in the presence of the hole scavenger, exhibited a negative shift ranging from -100 to -200 mV compared to the KOH onset potential. This shift is attributed to the film surface's limited efficiency in collecting holes for water oxidation at low potentials, as rapid recombination kinetics compete with water oxidation. Interestingly, the photocurrent observed with Na 2 SO 3 electrolyte was 0.15 to 0.3 times more than what we saw with KOH electrolyte. Our preliminary results indicate a current density of ~2.0-2.5 mA cm -2 at 1.8 V and a hole collection efficiency of ~84 % at 1.23 V vs RHE, the thermodynamic water oxidation potential. In summary, we have made significant progress toward enhancing the PEC activity of anatase TiO 2 thin films by optimizing the film structure for both reactivity and charge transport.

Porosity-dependent photoelectrochemical activity of double-layered TiO2 thin films deposited by spin-coating method

A Dual-Layer Titania Film with Enhanced Photocatalytic Activity

Multi-layered Mesoporous TiO2thin Films with Large Pores and Highly Crystalline Frameworks for Efficient Photoelectrochemical Conversion

Fabrication and Photocatalytic Properties of Porous Crystalline Titanium Dioxide Film Co-Doped with Fe and Si by PEO

Controllable Fabrication and Characterization of Porous C/TiO2 Nanocomposite Films As Solar Selective Absorber

In-situ Fabrication of Dual Porous Titanium Dioxide Films As Anode for Carbon Cathode Based Perovskite Solar Cell

Fast formation of thin TiO x layer on titanium surface enabling a broadband light capture and fast charge carrier transfer

Maximizing Quantum Hole Collection on Anatase TiO2 Thin Films with (001) Facets for Photoelectrochemical Oxigen Evolution Reaction Efficiency

TEM Analysis of Photocatalytic TiO2 Thin Films Deposited on Polymer Substrates by Low-Temperature ICP-PECVD

Enhancing the Long-Term Photoelectrochemical Performance of TiO 2 /Si Photocathodes by Coating of Ti-Doped Mesoporous Hematite

Low-temperature preparation of TiO2 films and enhancement of their photocatalytic activity by organic semiconductor

Doping of photoactive TiO 2 films by DC Plasma Electrolytic Oxidation: effect of transition metals

A Simple and Efficient Method Using Polymer Dispersion to Prepare Controllable Nanoporous TiO2 Anodes for Dye-Sensitized Solar Cells

Pore walls as high-way for efficient bulk charge transfer in porous SrTiO3 single crystals boosting photocatalytic overall water splitting

TiO2 Microflowers Assembled by 6-Nm Single-Crystal Stranded Wires with Improved Photoelectrochemical Performances

Preparation and photoelectrochemical properties of porous thin films composed of submicron TiO2 particles

Photocatalytic activity of TiO2-PEDT/PSS dual-layer composite film

Dual active sites over TiO 2 homojunction through tungsten doping and oxygen vacancies for enhanced photoelectrochemical properties

Electrochemical Preparation and Characterization of Surface-Fluorinated TiO2 Nanoporous Film and Its Enhanced Photoelectrochemical and Photocatalytic Properties

Facile Fabrication of Three-Dimensional Interconnected Nanoporous N-TiO 2 for Efficient Photoelectrochemical Water Splitting

Enhanced photocatalytic H2 evolution based on a polymer/TiO2 film heterojunction