Pulmonary manifestations of Kaposi's sarcoma. 1987.

S. Garay,M. Belenko,E. Fazzini,R. Schinella

IF: 9.6

Chest

Abstract:

What problem does this paper attempt to address?

THE APPLICATION OF COMPOSITE MATERIALS IN THE AEROSPACE INDUSTRY

Jakub Skoczylas,Sylwester Samborski,Mariusz Kłonica

DOI: https://doi.org/10.35784/jteme.73

2019-01-30

Journal of Technology and Exploitation in Mechanical Engineering

Abstract:The paper investigates the growing popularity of composite materials concentrating on explanation of their advantages, especially taking into consideration composite materials used in the aerospace industry such as polymer matrix composites, metal matrix composites, ceramic matrix composites and smart composite materials. Various types of matrices and fibers are described with special emphasis on nanotechnology and opportunities to improve the properties of composites. The paper also presents selected examples of applications in the aerospace industry.
Thermosetting Composite Materials in Aerostructures

Brian G. Falzon,Robert S. Pierce

DOI: https://doi.org/10.1007/978-3-030-35346-9_3

2020-01-01

Abstract:Thermosetting composites in aircraft structures are typically based on high-performance reinforcing materials, such as carbon fibre, held together by polymer resins, such as epoxies, which undergo an irreversible curing reaction to form the desired structural components. Compared to conventional metallic materials used in aerostructures, thermosetting composites offer superior specific strength and stiffness, along with improved corrosion and fatigue resistance. This can lead to significant gains in performance and fuel efficiency, along with reduced maintenance requirements. Consequently, these materials continue to gain favour in aircraft construction. The drive towards lower production costs, partly facilitated through the development of larger integrated structural components at higher production rates, is leading to new innovations in manufacturing. Advances in liquid resin infusion methodologies are helping to produce such large structural components more economically, while the development of automated fibre placement technologies is enhancing production quality and minimising conventional labour costs. However, a lack of maturity and experience in the analysis, design, manufacture, and maintenance of composite aerostructures continue to necessitate the need for greater research. For example, improvements in non-destructive inspection and adhesively bonded repairs are required to make composite maintenance more efficient and reliable. Further weight savings and performance benefits could also be achieved by integrating essential systems within composite structures, imbuing them with ‘multifunctionality’. Composite waste is another significant issue, given the projected increase in demand for these materials. In particular, thermoset composite recycling is expected to be a key technology requirement.
Advanced synthetic and biobased composite materials in sustainable applications: a comprehensive review

Faris M. AL-Oqla,Mohammed T. Hayajneh,Nashat Nawafleh

DOI: https://doi.org/10.1007/s42247-023-00478-z

2023-03-14

Emergent Materials

Abstract:The environmental changing and the innovative production methods have made advanced composite materials essential for the modern societies. Due to their unique properties, such multimaterial systems have found use in a variety of contemporary contexts. In this work, the implementations of composite materials in automotive, aerospace, marine, sport, defense, structural, and building applications have been debated and explored systematically. Composite materials have been shown to be superior to traditional materials in a number of ways, such as their ability to reduce system weight, which leads to significant energy savings and enhanced performance in a number of different contexts. Also taken into account was the feasibility of mass-producing composite material systems meeting the needs of a variety of designs with varying degrees of complexity in order to allow for extensive leeway in the creation of new shapes, while keeping the number of individual parts to a minimum. Moreover, there is the option to pick and choose the components in order to tweak them until they have the desired properties and functionality. Thus, this work demonstrates the advantages of adopting composite materials in a variety of industries to improve designers’ and decision makers’ comprehension of the characteristic-performance scheme in the field of composite systems.
Advanced Composite in Aerospace Applications: Opportunities, Challenges, and Future Perspective

M. R. M. Asyraf,R. A. Ilyas,S. M. Sapuan,M. M. Harussani,H. M. Hariz,J. M. Aiman,Danish Mahmood Baitaba,M. R. Sanjay,M. R. Ishak,M. Norkhairunnisa,Shubham Sharma,Mohammad Azad Alam,Mochamad Asrofi

DOI: https://doi.org/10.1007/978-3-030-88192-4_24

2022-01-01

Abstract:In recent years, a lot of progress has been created on aerospace materials for structural and engineering applications. Composites are made when two or more different materials are combined to create superior and distinctive materials. For aerospace engineering, there is considerable progress in material science and engineering with the technological challenges in terms of subtle and specialized materials like composite materials. These days composites materials have gotten necessary in aerospace engineering because of their high specific strength at lower weight, stiffness, and corrosion resistance. Apart from it, nanotube benefits also have an essential role in advancement in the aerospace applications. Carbon nanotubes (CNT) applications have progressively enlarged because of its excellent options exhibited by these materials. The potential applications of CNTs are enlarged by an oversized variety of various applications in scientific fields, like storing energy, biological applications, and emission. Besides that, various fillers were utilized to increase the thermal conductivity of the chemical compound composite matrix. In order to take full advantage of these nanofiller, it is critical to control the distribution of nanofillers within the polymer matrix, as this structural organization affects how the two constituent components interact with one another. Thus, this chapter investigates the advancement of composite in aerospace applications in terms of opportunities, challenges, and future perspective.
Computational Mechanics of Composite Materials

DOI: https://doi.org/10.1007/b137775

2005-01-01

Abstract:Composite materials play a vital role in modern engineering from aerospace to nuclear devices. Computational mechanics endeavours to provide precise numerical models of composites. More recently, it has been necessary to take account of the stochastic nature of their behaviour indicated by experiment. The approach of Computational Mechanics of Composite Materials lays stress on the advantages of combining theoretical advancements in applied mathematics and mechanics with the probabilistic approach to experimental data in meeting the practical needs of engineers. Features: Programs for the probabilistic homogenisation of composite structures with finite numbers of components allow composites to be treated as homogeneous materials with simpler behaviours. Allows treatment of defects in the interfaces within heterogeneous materials and those arising in composite objects as a whole by stochastic modelling. Provides new models for the reliability of composite structures. Propounds novel numerical algorithms for more effective Monte-Carlo simulation. Computational Mechanics of Composite Materials will be of interest to academic and practising civil, mechanical, electronic and aerospatial engineers, to materials scientists and to applied mathematicians requiring accurate and usable models of the behaviour of composite materials. The Engineering Materials and Processes series focuses on all forms of materials and the processes used to synthesise and formulate them as they relate to the various engineering disciplines. The series deals with a diverse range of materials: ceramics; metals (ferrous and non-ferrous); semiconductors; composites, polymers biomimetics etc. Each monograph in the series will be written by a specialist and will demonstrate how enhancements in materials and the processes associated with them can improve performance in the field of engineering in which they are used.
Recent Advancements in Advanced Composites for Aerospace Applications: A Review

Mohammad Azad Alam,H. H. Ya,S. M. Sapuan,Othman Mamat,Bisma Parveez,Mohammad Yusuf,Faisal Masood,R. A. Ilyas

DOI: https://doi.org/10.1007/978-3-030-88192-4_16

2022-01-01

Abstract:Continual development and establishment of innovative materials in aerospace applications intends at reduction in weight, improved fuel efficiency, superior performance, and decreased cost. Progress of engineering materials for aerospace application affects both financial and ecological issues. Latest developments in advanced composites impact aerospace applications, due to superior strength-to-weight ratio, wear resistance, and thermal resistance compared to conventional materials. Composite materials, due to their unique features, lighter weight, high fatigue strength, and anticorrosion resistance, have begun to be used more prominently for almost a decade to produce wings and fuselages in major commercial aircraft. In the last 20 years, advanced hybrid composites have turned out to be established as exceptionally efficient, elevated performance structural materials, and their consumption is increasing rapidly. This review chapter on recent advancements in advanced composites for aerospace applications presents a brief review of the present status of hybrid composite materials technology, in terms of characteristics and classification of aerospace composites, selection criteria, manufacturing process, and application of advanced composites in the aircraft and aerospace industries.
An overview of carbon-carbon composite materials and their applications

Nilesh Agarwal,Aditya Rangamani,Kathan Bhavsar,Shreyash Santosh Virnodkar,Aldrin Antonio Agostinho Fernandes,Utkarsh Chadha,Divyansh Srivastava,Albert E. Patterson,Vezhavendhan Rajasekharan

DOI: https://doi.org/10.3389/fmats.2024.1374034

2024-07-01

Frontiers in Materials

Abstract:Carbon-carbon composites are advanced materials known for their high strength, high-temperature stability, and superior thermal conductivity. Mechanical properties such as tensile strength, flexural strength, and compressive strength are examined, as well as thermal properties like the coefficient of thermal expansion and thermal conductivity, to understand the characteristics of the composite. Carbon-carbon composites are ideal for the aerospace industry’s need for lightweight and high-performance materials. Tribological and surface properties are relevant to this discussion, given the use case of carbon-carbon composites in extreme conditions, the effect of exposing the composite to different fluids and the change in friction and wear properties. Coatings can protect the composite from environmental factors such as UV radiation, oxidation, and erosion. Self-healing composites that can repair themselves can increase the lifespan of structures while reducing maintenance costs. These have been used in aerospace applications such as airplane braking systems, rocket nozzles, and re-entry vehicle heat shields. Furthermore, researchers have recently addressed the problem of finishing and drilling without delamination and loss of properties, and this study looks into unconventional methods that can be adopted for the same. This study aims to provide an overview of the current state of carbon-carbon composite materials and their applications.

materials science, multidisciplinary
Advanced Composite Materials and Aerospace Engineering

Joanna M. Austin,Lawrence A. Bergman,Michael B. Bragg,John D. Buckmaster,Rodney L. Burton

DOI: https://doi.org/10.3321/j.issn:1000-3851.2007.01.001

2007-01-01

Abstract:Advanced composite materials (ACM) have become the basic materials of the aerospace engineering. In this paper, the requirements and the applications of ACM in the aerospace engineering were presented. Some hot-spot technological fields, such as lattice materials and structures, nano-composite materials and multi-functional materials, were introduced. Their potential applications and developments were prospected. Finally, the problems to be resolved about raw materials, low cost, integration of design and evaluation in ACM were discussed.
Recent Advances in Hybrid Nanocomposites for Aerospace Applications

Beatriz Monteiro,Sónia Simões

DOI: https://doi.org/10.3390/met14111283

IF: 2.695

2024-11-13

Metals

Abstract:Hybrid nanocomposites have emerged as a groundbreaking class of materials in the aerospace industry, offering exceptional mechanical, thermal, and functional properties. These materials, composed of a combination of metallic matrices (based on aluminum, magnesium, or titanium) reinforced with a mixture of nanoscale particles, such as carbon nanotubes (CNTs), graphene, and ceramic nanoparticles (SiC, Al2O3), provide a unique balance of high strength, low weight, and enhanced durability. Recent advances in developing these nanocomposites have focused on optimizing the dispersion and integration of nanoparticles within the matrix to achieve superior material performance. Innovative fabrication techniques have ensured uniform distribution and strong bonding between the matrix and the reinforcements, including advanced powder metallurgy, stir casting, in situ chemical vapor deposition (CVD), and additive manufacturing. These methods have enabled the production of hybrid nanocomposites with improved mechanical properties, such as increased tensile strength, fracture toughness, wear resistance, and enhanced thermal stability and electrical conductivity. Despite these advancements, challenges remain in preventing nanoparticle agglomeration due to the high surface energy and van der Walls forces and ensuring consistent quality and repeatability in large-scale production. Addressing these issues is critical for fully leveraging the potential of hybrid nanocomposites in aerospace applications, where materials are subjected to extreme conditions and rigorous performance standards. Ongoing research is focused on developing novel processing techniques and understanding the underlying mechanisms that govern the behavior of these materials under various operational conditions. This review highlights the recent progress in the design, fabrication, and application of hybrid nanocomposites for aerospace applications. It underscores their potential to revolutionize the industry by providing materials that meet the demanding requirements for lightweight, high-strength, and multifunctional components.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Manufacturing processes for composite materials and components for aerospace applications

A. McIlhagger,E. Archer,R. McIlhagger

DOI: https://doi.org/10.1016/b978-0-08-102679-3.00003-4

2020-01-01

Abstract:For the successful operation of civil aircraft, the main drivers currently are environmentally based. This implies that significant weight reductions are essential, and hence, a fundamental re-think of the materials and their manufacturing processes used has taken place over a number of years. For realizing the benefits offered by advanced composite materials, manufacturing processes must be able to produce economically large components with as few joints as possible. Also, in order to increase the robustness of primary structures in-service, there is a move toward cocuring monolithic components and elimination of cellular sandwich panels and multistage cures; this presents challenges regarding the complexity of tooling and control of the process. This chapter presents the key manufacturing processes used for composite aerospace applications, control of these processes, and some basic theory. Current applications of these processes on modern composite airframes are provided.
Sustainability-Driven Design of Aircraft Composite Components

Angelos Filippatos,Dionysios Markatos,Georgios Tzortzinis,Kaushik Abhyankar,Sonia Malefaki,Maik Gude,Spiros Pantelakis

DOI: https://doi.org/10.3390/aerospace11010086

IF: 2.66

2024-01-19

Aerospace

Abstract:The current prevailing trend in design across key sectors prioritizes eco-design, emphasizing considerations of environmental aspects in the design process. The present work aims to take a significant leap forward by proposing a design process where sustainability serves as the primary driving force. In this context, sustainability is positioned as a fundamental component to be integrated into the initial stages of design, introducing innovative multidisciplinary criteria that redefine the design paradigm. Within this framework, sustainability is characterized using a comprehensive and quantifiable index encompassing technological, environmental, economic, and circular economy dimensions. To demonstrate the practical application of sustainability as the primary criterion in designing mechanical components, a parametrized finite element model of a composite plate is utilized, integrating both pristine and recycled fibers. Subsequently, a demonstrator derived from the aviation industry—specifically, a hat stiffener—is employed as a validation platform for the proposed methodology, ensuring alignment with the demonstrator's specific requirements. Various representative trade-off scenarios are implemented to guide engineers' decision-making during the conceptual design phase. Additionally, the robustness of the aforementioned methodology is thoroughly assessed concerning changes in the priority assigned to each sustainability criterion and its sensitivity to variations in the initial data. The significance of the proposed design methodology lies in its effectiveness in addressing the complex challenges presented by conflicting sustainability objectives. Furthermore, its adaptability positions it for potential application across various sectors, offering a transformative approach to sustainable engineering practices.

engineering, aerospace
Mechanistic Data Science for Modeling and Design of Aerospace Composite Materials

Satyajit Mojumder,Lei Tao,Ying Li,Wing Kam Liu

DOI: https://doi.org/10.48550/arXiv.2112.00968

2021-12-02

Materials Science

Abstract:Polymer matrix composites exhibit remarkable lightweight and high strength properties that make them attractive for aerospace applications. Constituents' materials such as advanced polymers and fibers or fillers with their hierarchical structure embed these exceptional properties to the composite materials. This hierarchical structure in multiple length scales provides an opportunity for designing the composite materials for optimized properties. However, the high dimensional design space for the constituents' materials and architectures choice of the composites makes it a challenging design problem. To tackle this high dimensional design space, a systematic, efficient approach named mechanistic data science framework is proposed in this work to identify the governing mechanisms of materials systems from the limited available data and create a composite knowledge database. Our composite knowledge database comprises the knowledge of polymers at the nanoscale with nano reinforcement, the unidirectional structure at the microscale, and woven structure at mesoscale mechanisms that can be further used for the part scale composite design and analysis. The mechanistic data science framework presented in this work can be further extended to other materials systems that will provide the materials designer with the necessary tools to evaluate a new materials system design rapidly.
State-Of-The-Art of Sandwich Composite Structures: Manufacturing—to—High Performance Applications

Ayesha Kausar,Ishaq Ahmad,Sobia A. Rakha,M. H. Eisa,Abdoulaye Diallo

DOI: https://doi.org/10.3390/jcs7030102

2023-03-07

Journal of Composites Science

Abstract:This cutting-edge review highlights the fundamentals, design, and manufacturing strategies used for sandwich composites. Sandwich composite structures have the advantages of light weight, high strength, impact resistance, stability, and other superior features for advanced applications. In this regard, different core materials have been used in the sandwich composite structures, such as cellular polymer foam, metallic foam, honeycomb, balsa, tubular, and other core geometries. Among these, honeycomb sandwich composite materials have been effectively applied in space engineering, marine engineering, and construction applications. The foremost manufacturing techniques used for sandwiched composite structures include hand lay-up, press method, prepreg method, vacuum bagging/autoclave, vacuum assisted resin infusion, resin transfer molding, compression molding, pultrusion, three-dimensional (3D) printing, four-dimensional (4D) printing, etc. In advanced composite manufacturing, autoclave processes have been the method of choice for the aerospace industry due to less delamination between plies and easy control of thickness dimensions. Moreover, machining processes used for sandwich composites are discussed in this article. In addition to aerospace, the high-performance significance of sandwiched composite structures is covered mainly in relation to automobile engineering and energy absorption applications. The structure-, fabrication-, and application-related challenges and probable future research directions are also discussed in this article.
Application of Liquid Composite Molding Technology on Aeronautics

Anan Zhao,Linwen Wang,Haojun Wang,Lingjing Zhang,Xia Su,Chao Yan,Jianjun Jiang

DOI: https://doi.org/10.3969/j.issn.1001-3539.2018.04.028

2018-01-01

Abstract:The research and application progress situations of liquid composite molding technology on aeronautics were summarized. The aerospace applications of the resin composite were summarized,the meaning of the liquid composite molding, the advantages and disadvantages of several typical liquid composite molding and their applications in the field of aviation were reviewed. The latest research progress of the liquid composite molding were summarized,some technical problems in the current stage of liquid composite molding were analyzed,and the aviation applications of auxiliary liquid composite molding such as automated placement technology and utilization of liquid composite molding on load-bearing structure were generalized. Focus on the gap between domestic and foreign liquid composite molding,it was discussed for that the urgent problems waiting to be solved of liquid composite molding,and the future development prospects were prospected of liquid composite molding. It is believed that the liquid composite molding will gradually realize the integration,automation,digitalization and intelligent development.
Academic research for composite aerostructures - A personal perspective

Richard Butler

DOI: https://doi.org/10.1016/j.compositesb.2024.111239

IF: 11.322

2024-01-29

Composites Part B Engineering

Abstract:An overview of composites research arising from more than 10 years of collaboration between a supplier of composite aerospace parts and the author's university research group is presented. The personal perspective underlines the importance of material characterization and design, such as the use of non-standard fibre angles, to promote reduced defect occurrence in manufacturing processes . Detailed Finite Element studies enable the development of new edge treatment methods in standard coupon tests to accurately assess structural performance at the part scale. The collaboration has led to PhD research with industrial impact via significant improvements in both the productivity and reliability of composite parts produced by the industrial partner.

engineering, multidisciplinary,materials science, composites
Evolution of Aerospace Composite Materials

M. Norkhairunnisa,T. Chai Hua,S. M. Sapuan,R. A. Ilyas

DOI: https://doi.org/10.1007/978-3-030-88192-4_18

2022-01-01

Abstract:The composite materials utilized in the aerospace sector are discussed in this chapter. Fabrication of aviation materials begins with the use of natural composite materials, such as wood. The aerospace industries are then dominated by steel, which is followed by the plastic era. There has been significant development made on composite materials for aircraft due to concerns about lightweight aircraft structures, fuel efficiency, and high-strength aircraft structures and certain demands on high-temperature requirements. In the aircraft structure, composites such as polymer matrix composite (PMC), metal matrix composite (MMC), and ceramic matrix composite (CMC) were used. Composite materials were used to construct nearly half of the aircraft’s construction. Composite materials have evolved with improved reinforcing fillers that can improve composite qualities, thanks to cutting-edge technologies. Materials used in the composite include nanofiller, natural fibers, and self-healing materials. There was a thorough discussion of the various types of composites. Finally, in this chapter, the future of aerospace composite materials was examined.
Application of the Finite Element Method in the Analysis of Composite Materials: A Review

Sarah David Müzel,Eduardo Pires Bonhin,Nara Miranda Guimarães,Erick Siqueira Guidi

DOI: https://doi.org/10.3390/polym12040818

IF: 5

2020-04-04

Polymers

Abstract:The use of composite materials in several sectors, such as aeronautics and automotive, has been gaining distinction in recent years. However, due to their high costs, as well as unique characteristics, consequences of their heterogeneity, they present challenging gaps to be studied. As a result, the finite element method has been used as a way to analyze composite materials subjected to the most distinctive situations. Therefore, this work aims to approach the modeling of composite materials, focusing on material properties, failure criteria, types of elements and main application sectors. From the modeling point of view, different levels of modeling—micro, meso and macro, are presented. Regarding properties, different mechanical characteristics, theories and constitutive relationships involved to model these materials are presented. The text also discusses the types of elements most commonly used to simulate composites, which are solids, peel, plate and cohesive, as well as the various failure criteria developed and used for the simulation of these materials. In addition, the present article lists the main industrial sectors in which composite material simulation is used, and their gains from it, including aeronautics, aerospace, automotive, naval, energy, civil, sports, manufacturing and even electronics.

polymer science
Natural fibre and polymer matrix composites and their applications in aerospace engineering

P. Balakrishnan,M.J. John,L. Pothen,M.S. Sreekala,S. Thomas

DOI: https://doi.org/10.1016/b978-0-08-100037-3.00012-2

2016-01-01

Abstract:Fibre-reinforced polymer composite materials are fast gaining ground as preferred materials for construction of aircrafts and spacecrafts. In particular, their use as primary structural materials in recent years in several technology demonstrator front-line aerospace projects worldwide has provided confidence that has led to their acceptance as prime materials for aerospace vehicles. Fibre polymer composites alongside aluminium alloys are the most frequently used materials in aircraft structures. The use of composites in civil aircraft, military fighters and helicopters has increased rapidly since the 1990s, and composites are now competing head-to-head with aluminium as the materials of choice in many airframe structures. The use of composites in gas turbine engines for both civil and military aircraft is also growing. The main reasons for using composites are to reduce weight, increase specific stiffness and strength, extend fatigue life and minimize problems with corrosion. Natural fibre composites present several advantages over man-made fibre composites such as low cost, light weight, high specific mechanical properties, nonhazardous nature, eco-friendliness, renewability and so on, and consequently their utilization in various industrial sectors including aerospace engineering is highly promising. This chapter discusses different aspects of natural fibre as well as conventional polymer matrix composites, focussing on aerospace applications.
Composite material: A review over current development and automotive application

Puran Singh,V. Raghavender,Sudhir Joshi,Nikale Pooja Vasant,Ankita Awasthi,Amandeep Nagpal,Alaa jasim Abd al-saheb

DOI: https://doi.org/10.1016/j.matpr.2023.11.012

2023-11-08

Materials Today: Proceedings

Abstract:The quantity and quality of studies undertaken to find new applications for the material indicate its importance in the modern world. It used to be accepted wisdom that a design engineer would only employ tried-and-true components, but times have changed. The field of current material engineering would be severely lacking without using composites. Designers of all stripes now have better options for utilizing cheaper, less labour-intensive materials thanks to advancements in composite technology. Composites have several potential applications and are currently employed in some of them. This research describes the process for creating composite propeller shafts and examines their vibrational qualities. This research will look into the results of switching out steel drive shafts for composite ones. Two of the most crucial parts of a composite drive shaft's construction are the shaft itself and the couplings. Critical speed, static torque, and nonlinear isotropic material behaviour are assumed for adhesive joints, but these assumptions are disregarded for metal and a composite shaft. For the design and accompanying analysis, finite element software is used (ANSYS). As a result, the research provides crucial information for developing a composite drive shaft.

English Else
Advanced Composite Materials for Structure Strengthening and Resilience Improvement

Xinghuai Huang,Shaoyang Su,Zhaodong Xu,Qisong Miao,Wenfeng Li,Lixin Wang

DOI: https://doi.org/10.3390/buildings13102406

IF: 3.324

2023-09-22

Buildings

Abstract:Advanced composite materials have excellent performance and broad engineering application prospects, and have received widespread attention in recent years. Advanced composite materials can mainly be divided into fiber-reinforced composite materials, laminated composite materials, matrix composite materials, and other composite materials. This article provides a comprehensive overview of the types and characteristics of advanced composite materials, and provides a comprehensive evaluation of the latest research on structural strengthening and resilience improvement in advanced composite materials from the perspectives of new methods, modeling optimization, and practical applications. In the field of fiber-reinforced composite materials, the hybrid technology of carbon fiber and glass fiber can achieve dual advantages in combining the two materials. The maximum increase in mechanical properties of multilayer sandwich RH plate by hybrid technology is 435.4% (tensile strength), 149.2% (flexural strength), and 110.7~114.2% (shear strength), respectively. In the field of laminated composite materials, different mechanical properties of laminated composite materials can be obtained by changing the deposition sequence. In the field of matrix composites, nano copper oxide particles prepared by nanotechnology can increase the hardness and tensile strength of the metal matrix material by 77% and 78%, respectively. In the field of other composite materials, viscoelastic materials and magnetorheological variants have received widespread attention. The development of composite materials benefits from the promotion of new methods and technologies, but there are still problems such as complex preparation, high cost, and unstable performance. Considering the characteristics, application requirements, cost, complexity, and performance of different types of composite materials, further improvements and innovations are needed in modeling and optimization to better meet practical engineering needs, such as the application of advanced composite materials in civil engineering, ships, automobiles, batteries, and other fields.

construction & building technology,engineering, civil

Pulmonary manifestations of Kaposi's sarcoma. 1987.

THE APPLICATION OF COMPOSITE MATERIALS IN THE AEROSPACE INDUSTRY

Thermosetting Composite Materials in Aerostructures

Advanced synthetic and biobased composite materials in sustainable applications: a comprehensive review

Advanced Composite in Aerospace Applications: Opportunities, Challenges, and Future Perspective

Computational Mechanics of Composite Materials

Recent Advancements in Advanced Composites for Aerospace Applications: A Review

An overview of carbon-carbon composite materials and their applications

Advanced Composite Materials and Aerospace Engineering

Recent Advances in Hybrid Nanocomposites for Aerospace Applications

Manufacturing processes for composite materials and components for aerospace applications

Sustainability-Driven Design of Aircraft Composite Components

Mechanistic Data Science for Modeling and Design of Aerospace Composite Materials

State-Of-The-Art of Sandwich Composite Structures: Manufacturing—to—High Performance Applications

Application of Liquid Composite Molding Technology on Aeronautics

Academic research for composite aerostructures - A personal perspective

Evolution of Aerospace Composite Materials

Application of the Finite Element Method in the Analysis of Composite Materials: A Review

Natural fibre and polymer matrix composites and their applications in aerospace engineering

Composite material: A review over current development and automotive application

Advanced Composite Materials for Structure Strengthening and Resilience Improvement