Abstract:A Discrete Element Method (DEM), a computerized testing rig and a soil bin were used to explain soil profile deformation caused by mouldboard plough. By using DEM, the motion of particles is given by collisions between particles. Soil-tillage tool interaction simulation was established by a 3D geometry of a mouldboard plough created using PTC Creo Parametric 3D Modelling software and soil bed modeled by discrete element particles using EDEM software. A bond element was introduced between particles and cohesion of soil was formed to create a simulation of the actual cohesive soil. The horizontal and vertical forces and soil disturbance in terms of bulk density at different speeds and depths were investigated. However, the simulation experiments followed the field experiments which were conducted using a computerized testing rig. Further, reaction forces on the plough and the resulting bulk densities were estimated from the simulated results and compared with the actual results from the field. Also, the accuracy of the developed model to predict soil displacement was measured and compared with the soil bin data with the average relative error of 1.317%. The simulated results of horizontal, vertical forces and bulk density matched well with the results obtained in the field experiment with the relative error of 4.435, 3.029 and 3.119% respectively. The vertical force provided the best regression results of 0.9948 <math>R2</math> with <math>RMSE</math> of 0.5964, followed by 0.9884 <math>R2</math> with <math>RMSE</math> of 0.4089 and 0.8391 <math>R2</math> with <math>RMSE</math> of 0.5441 for horizontal force and bulk density respectively. All regression results were obtained at <math>p<0.05</math>. The ANOVA test showed that the p-values for the horizontal force, vertical force and bulk density were 0.753, 0.695 and 0.025 respectively. There was no significant difference between the simulation and experiment results for cutting forces while there was a significant difference for the bulk density at <math>p<0.05</math>. This model can be applied as an accurate, consistent and fast method of effective prediction of the final soil condition and forces needed for tillage operation.

3D DEM tillage simulation: Validation of a hysteretic spring (plastic) contact model for a sweep tool operating in a cohesionless soil

Simulation of Front End Loader Bucket–soil Interaction Using Discrete Element Method

Three-dimensional discrete element modelling of tillage: Determination of a suitable contact model and parameters for a cohesionless soil

Three-dimensional discrete element modelling (DEM) of tillage: Accounting for soil cohesion and adhesion

Defining the effect of sweep tillage tool cutting edge geometry on tillage forces using 3D discrete element modelling

Discrete element modeling of cultivator sweep-to-soil interaction: Worn and hardened edges effects on soil-tool forces and soil flow

Simulation of tillage forces and furrow profile during soil-mouldboard plough interaction using discrete element modelling

Determination of discrete element model parameters for a cohesive soil and validation through narrow point opener performance analysis

Prediction of cutting forces and soil behavior with discrete element simulation

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

Comparison of the discrete element and finite element methods to model the interaction of soil and tool cutting edge

Discrete element modelling of tillage forces and soil movement of a one-third scale mouldboard plough

Simulating the effect of rake angle on narrow opener performance with the discrete element method

Modeling the interaction of soil and a vibrating subsoiler using the discrete element method

Modelling soil-rotor blade interaction of vertical axis rotary tiller using discrete element method (DEM)

Effect of soil particle size on soil-subsoiler interactions using the discrete element method simulations

A 3D simulation model of corn stubble cutting using finite element method

Simulation on dynamic behavior of dry soil ahead of the bulldozing plate with different cutting angles by DEM

Dynamic three-dimensional simulation model of soil interaction estrecha narrow tillage tool using the finite element method

Interaction between soil and a wide cutting blade using the discrete element method

Discrete element modelling of top soil burial using a full scale mouldboard plough under field conditions