Abstract:Lightweight polypropylene (PP) composite materials are preferred to other polymer-matrix composites, in the conductive and electromagnetic interference (EMI) shielding industries, due to their pronounced advantages. However, facile and high-efficiency fabrication of low-density multifunctional PP composite foams, for EMI shielding, remains a challenge. In this study, we fabricated lightweight polypropylene (PP)/carbon nanotubes (CNTs)/carbon black (CB) nanocomposite foams by combining high-speed mechanical mixing, structural manipulation and solid-state supercritical carbon dioxide (ScCO2) foaming. Due to the "brick and mud" dense structure formed by high-speed mechanical mixing and structure manipulation, we obtained a low density (0.082–0.101 g/cm3) after solid-state ScCO2 foaming in the nanocomposite foams containing hybrid nanofiller (1:1). Specifically, segregated synergistic conductive networks were observed in the nanocomposite foams. With such networks, the nanocomposite foams containing hybrid nanofiller (1:1) exhibited the best electrical properties (∼6.67 × 10−3 S/cm at 5 wt% hybrid filler), and the lowest percolation threshold (0.016 vol%) compared with other systems. Moreover, the nanocomposite foams containing 5 wt% hybrid nanofiller (1:1) showed enhanced specific EMI shielding effectiveness (∼72.23 dB cm3/g at X band), and absorption-dominated shielding characteristic. Furthermore, we found a good thermal insulation performance (61.2 mW m−1 K−1) and compressive properties (∼37.1 MPa g−1 cm3 at 50% strain). Overall, our work provides a simple and versatile strategy for fabricating high-performance PP-based nanocomposite foams. These foams present lightweight, ultra-low percolation threshold, high strength, thermal insulation and good EMI shielding properties.

Segregated polylactide/poly(butylene adipate‐co‐terephthalate)/ MWCNTs nanocomposites with excellent electrical conductivity and electromagnetic interference shielding

Ultralow percolation threshold biodegradable PLA/PBS/MWCNTs with segregated conductive networks for high‐performance electromagnetic interference shielding applications

Electromagnetic interference shielding enhancement of poly(lactic acid)-based carbonaceous nanocomposites by poly(ethylene oxide)-assisted segregated structure: a comparative study of carbon nanotubes and graphene nanoplatelets

Morphology evolution to form double percolation polylactide/polycaprolactone/MWCNTs nanocomposites with ultralow percolation threshold and excellent EMI shielding

Excellent mechanical and electromagnetic interference shielding properties of polylactic acid/polycaprolactone/multiwalled carbon nanotube composites enabled by a multilayer structure design

Creating poly(lactic acid)/carbon nanotubes/carbon black nanocomposites with high electrical conductivity and good mechanical properties by constructing a segregated double network with a low content of hybrid nanofiller

Poly(lactic acid)/carbon nanotube composites with enhanced electrical conductivity via a two-step dispersion strategy

Improved mechanical and electromagnetic interference shielding performance of segregated UHMWPE/CNTs via microwave-assisted sintering

Crafting "brick-mud" segregated nanocomposites: a novel approach to superior electromagnetic interference shielding, electrical insulation, and thermal conductivity in biopolymers

Microwave-Assisted Sintering to Rapidly Construct a Segregated Structure in Low-Melt-Viscosity Poly(Lactic Acid) for Electromagnetic Interference Shielding

Outstanding electromagnetic interference shielding of bamboo fiber/carbon nanotubes/polylactic acid composites with biodegradability and corrosion resistance

Highly efficient electromagnetic interference shielding and superior mechanical performance of carbon nanotube/polydimethylsiloxane composite with interface-reinforced segregated structure

Improved mechanical and EMI shielding properties of PLA/PCL composites by controlling distribution of PIL-modified CNTs

Three-Dimensional-Printed Carbon Nanotube/Polylactic Acid Composite for Efficient Electromagnetic Interference Shielding

Lightweight electromagnetic interference shielding poly(L-lactic acid)/poly(D-lactic acid)/carbon nanotubes composite foams prepared by supercritical CO2 foaming

Tuning multifunctional behavior of PLA/POE‐g‐GMA/MWCNT nanocomposites: Mechanical, rheological, thermal, thermomechanical, and electromagnetic properties

Lightweight multifunctional polypropylene/carbon nanotubes/carbon black nanocomposite foams with segregated structure, ultralow percolation threshold and enhanced electromagnetic interference shielding performance

Selective Localization of Carbon Black in Bio-Based Poly (Lactic Acid)/Recycled High-Density Polyethylene Co-Continuous Blends to Design Electrical Conductive Composites with a Low Percolation Threshold

Enhanced High-Performance iPP/TPU/MWCNT Nanocomposite for Electromagnetic Interference Shielding

Construction of in-situ grid conductor skeleton and magnet core in biodegradable poly (butyleneadipate-co-terephthalate) for efficient electromagnetic interference shielding and low reflection

Influence of MWCNTs and nano-Fe3O4 on the properties and structure of MWCNTs/ Fe3O4/PLA composite film with electromagnetic interference shielding function