Abstract:Carbon capture, as a core technology for mitigating greenhouse gas emissions, the greatest challenge is the balance between separation performance and energy consumption. This study seeks to evaluate and screen the separation performance and energy consumption of four typical adsorbents (13X, Mg-MOF-74, activated carbon, and Lewatit VP OV 1065) in vacuum temperature swing adsorption (VTSA) and vacuum swing adsorption (VSA) through optimization approach, which will support in-depth research and decision-making on adsorption processes. A non-isothermal non-adiabatic numerical model was carried out to describe a novel 4-bed 10-step VTSA cycle developed on an exchange type adsorption unit (ETAU), and the model was validated by binary breakthrough and temperature swing experiments. A 4-bed 10-step VSA cycle was in turn established and investigated. Parametric analysis of the two cycles was performed by varying the operating variables including feed gas flow rate, recycle time, and purge-to-feed ratio. Process optimization of the multiplicative fraction evaluation function, simultaneously considering purity, recovery, and productivity, was achieved using a dual convergence algorithm. Results showed that all four adsorbents could achieve more than 90 % purity and recovery on the VTSA process employing the ETAU for post-combustion carbon capture, and the separation performance was substantially superior to that of the VSA cycle. Mg-MOF-74 obtained a CO 2 product with 97.90 % purity, 98.48 % recovery, and 5.48 mol/kg ads /hr productivity at a desorption temperature of 383.15 K; it has a specific heat consumption of 1.45 GJ th /ton and a specific power consumption of 0.55 GJ el /ton. The total energy consumption of 13X was slightly lower than that of amine adsorbents, giving 95.00 % purity, 97.60 % recovery, and 1.91 mol/kg ads /hr productivity. Relatively low desorption temperature is expected to introduce ultra-low-grade waste heat for partial heat source substitution, contributing to the energy sustainability of adsorption carbon capture technology.

A complementary VOCs recovery system based on cryogenic condensation and low-temperature adsorption

A novel cryogenic condensation system combined with gas turbine with low carbon emission for volatile compounds recovery

A novel volatile organic compound cryogenic recovery system with cold energy storage

A novel cryogenic condensation system based on heat-driven refrigerator without power input for volatile organic compounds recovery

Design and dynamic behaviour investigation of a novel VOC recovery system based on a deep condensation process

Reconfiguring closed-loop desorption for industrial solvent recycling by retaining post-condensation volatile organic compounds

Study on Energy-Saving Vacuum Elastic Cold Trap Based on Small Stirling Refrigeration

Techno-economic Analysis on Temperature Vacuum Swing Adsorption System Integrated with Pre-Dehumidification for Direct Air Capture

Concentration Control of Volatile Organic Compounds by Ionic Liquid Absorption and Desorption

Research of VOCs Clearance Device Based on Adsorption Catalysis Techniques

Novel Off-Gas Treatment Technology to Remove Volatile Organic Compounds with High Concentration

Dynamic Study of VSA and TSA Processes for VOCs Removal from Air

Low-grade heat utilization and CO2liquefaction process based on LiBr absorption refrigeration

Remove Volatile Organic Compounds(Vocs) with Membrane Separation Techniques

A Review of the Treatment Techniques of VOC

Development of a Refrigerant-Free Cryotrap Unit for Pre-Concentration of Biogenic Volatile Organic Compounds in Air

Process design and adsorbent screening of VSA and exchanger type VTSA for flue gas CO 2 capture

Near Carbon-Zero Cycle from VOCs Capture to Carbon Fixation

Investigation of the competitive adsorption mechanism between typical volatile organic compounds (VOCs) and water vapor in waste gas emissions from the fermentation industry

Treatment of VOCs with a wet scrubbing – catalytic ozonation process: Efficiency, mechanism and pilot-scale application

An improved vacuum pressure swing adsorption process with the simulated moving bed operation mode for CH4/N2 separation to produce high-purity methane