Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. This paper proposes a validated procedure that can be used for development stage of model-based controller for heavy-duty electromechanical disc brakes. Firstly, system dynamics model of a single piston electromechanical disc brake is constructed in Matlab/Simulink environment in consideration of nonlinear friction model. To ensure the accuracy of system dynamics model, open loop measurements (clamping force, motor angle and motor current) are conducted on a prototype of single piston electromechanical disc brake. Experimental data is used for the determination of system variables. The predicted outputs are verified by comparison of experimental measurement results. For the control purpose of electromechanical brake, a multi-stage closed loop architecture is introduced. To regulate clamping force, PID and sliding mode controllers are developed in Matlab/Simulink in consideration of braking performance requirements for heavy-duty vehicles. For management of running clearance between brake disc and pad, PID position controller is developed in simulation environment. Those controller parameters obtained in the simulation process are introduced to the control hardware. After that closed loop clamping force and position measurements are conducted. When the rise time values of both clamping force controllers are compared, it is seen that sliding mode controller can reach to the settling point faster than PID controller. As for the position controller, the rise time requirement has been achieved by the designed PID controller. The switching process of force and position controllers are implemented and functional closed loop measurements are conducted for different reference input signals. It is seen from the results that the rise time requirement for position controller has been achieved. The system response of clamping force parameter is considerably stable.

Automotive BBW AWB Dispulsion

Simulation and experimental research of a new automotive electromechanical brake system

Electromechanical braking systems and control technology: A survey and practice

Prototype of distributed electro-hydraulic braking system and its fail-safe control strategy

Wheel slip ratio control considering time delay characteristic for electro-mechanical braking system

Development of an electric booster system using sliding mode control for improved braking performance

Slip ratio control based on adaptive fuzzy sliding mode for vehicle with an electromechanical brake system

Hierarchical cooperative control of anti-lock braking and energy regeneration for electromechanical brake-by-wire system

A NEW DESIGN OF MAIN CYLINDER ELECTRIC BOOSTER FOR BRAKE-BY-WIRE SYSTEM

Wheel Braking Pressure Control Based on Central Booster Electrohydraulic Brake-by-Wire System

A Review of Electromechanical Brake(EMB) System

High-Precision Modulation of A Safety-Critical Cyber-Physical System: Control Synthesis and Experimental Validation

Proof-of-Concept Design of Electronic Wedge Brake with Multi-Rollers

A Multi-Source Braking Force Control Method for Electric Vehicles Considering Energy Economy

A Dynamic Decoupling Control Method for PMSM of Brake-by-Wire System Based on Parameters Estimation

Automotive Mechatronic Systems – General Developments and Examples (Mechatronische Systeme in Kraftfahrzeugen – Allgemeine Entwicklungen und Beispiele)

Modelling and control of electromechanical disc brake for heavy-duty vehicles

Vehicle Braking Force Distribution with Electronic Pneumatic Braking and Hierarchical Structure for Commercial Vehicle

Adaptive Dual-Loop Hydraulic Pressure Controller for Electric Booster Brake System

Control algorithm of electronic braking force distribution based on deceleration parameters

Anti-lock Braking Control for Electric Vehicle with Consideration of Backlash and Elasticity in Transmission System