Ozonation of activated carbon and its effects on the adsorption of VOCs exemplified by methylethylketone and benzene.

H. Chiang,P. Chiang,Chin-Pao Huang

DOI: https://doi.org/10.1016/S0045-6535(01)00216-8

IF: 8.8

2002-04-01

Chemosphere

Abstract:

What problem does this paper attempt to address?

Hyaluronic Acid/Ellagic Acid as Materials for Potential Medical Application

Beata Kaczmarek-Szczepańska,Konrad Kleszczyński,Lidia Zasada,Dorota Chmielniak,Mara Barbara Hollerung,Katarzyna Dembińska,Krystyna Pałubicka,Kerstin Steinbrink,Maria Swiontek Brzezinska,Sylwia Grabska-Zielińska

DOI: https://doi.org/10.3390/ijms25115891

IF: 5.6

2024-05-29

International Journal of Molecular Sciences

Abstract:The aim of this work was to develop and characterize a thin films composed of hyaluronic acid/ellagic acid for potential medical application. Its principal novelty, distinct from the prior literature in terms of hyaluronic acid films supplemented with phenolic acids, resides in the predominant incorporation of ellagic acid—a distinguished compound—as the primary constituent of the films. Herein, ellagic acid was dissolved in two different solvents, i.e., acetic acid (AcOH) or sodium hydroxide (NaOH), and the surface properties of the resultant films were assessed using atomic force microscopy and contact angle measurements. Additionally, various physicochemical parameters were evaluated including moisture content, antioxidant activity, and release of ellagic acid in phosphate buffered saline. Furthermore, the evaluation of films' biocompatibility was conducted using human epidermal keratinocytes, dermal fibroblasts, and human amelanotic melanoma cells (A375 and G361), and the antimicrobial activity was elucidated accordingly against Staphylococcus aureus ATCC 6538 and Pseudomonas aeruginosa ATCC 15442. Our results showed that the films exhibited prominent antibacterial properties particularly against Staphylococcus aureus, with the 80HA/20EA/AcOH film indicating the strong biocidal activity against this strain leading to a significant reduction in viable cells. Comparatively, the 50HA/50EA/AcOH film also displayed biocidal activity against Staphylococcus aureus. This experimental approach could be a promising technique for future applications in regenerative dermatology or novel strategies in terms of bioengineering.

biochemistry & molecular biology,chemistry, multidisciplinary
Tannic acid-reinforced soy protein/oxidized tragacanth gum-based multifunctional hemostatic film for regulation of wound healing

Mastafa H Al-Musawi,Basma Talib Al-Sudani,Safa Abdul Naser Fadhil,Maha Hameed Al-Bahrani,Marjan Ghorbani,Fatemeh Maleki,Fatemeh Mortazavi Moghadam

DOI: https://doi.org/10.1016/j.ijbiomac.2024.135750

2024-09-18

Abstract:With recent advances in the field of tissue engineering, composite films with biocompatibility, antimicrobial properties, and wound healing properties have gained potential applications in the field of wound dressings. In this research work, composite films of soy protein (S)/oxidized tragacanth gum (G) were successfully made using the solution casting process. The metal-organic framework containing curcumin (MOF) with concentrations of 5 and 10 wt% and tannic acid (TA) with concentrations of 6 and 12 wt% were entered into the polymer film. Surface morphology with scanning electron microscope (FE-SEM), thermal stability, mechanical properties, chemical structure, antioxidant, water absorption, cell viability, antibacterial activity, and biodegradability of the prepared films were investigated in laboratory conditions. In addition, the toxicity of the films in the cell environment was investigated, and the results showed that cell growth and proliferation improved in the presence of the prepared films, especially films SG/MOF10/TA6 and SG/MOF10/TA12 due to the presence of TA and MOF containing curcumin. Also, the antibacterial activity of the films showed that the presence of tannic acid and curcumin in the structure of the films increases their ability against pathogens. According to the obtained results, the newly produced nanocomposite film (SG/MOF10/TA12) has a high potential to be used for wound dressing due to its favorable characteristics and was considered the optimal film.
Morphological and biological assessment of films based on hyaluronic acid doped with cerium oxide and aluminum oxide for wound healing applications

Amani Saleh Almuslem,A.M. Alshehri,A.A. Menazea,M.O. Farea,M.A. El-Morsy

DOI: https://doi.org/10.1016/j.matchemphys.2024.129450

IF: 4.778

2024-05-15

Materials Chemistry and Physics

Abstract:Developing wound bandages with advanced properties to be qualified in improving the period of healing to avoid the harmful inflammation and the danger of the side effects that may be caused by the long period. Hyaluronic acid (HA) was fabricated and doped with several oxides; Alumina oxide (Al 2 O 3 ) and Cerium oxide (CeO 2 ) via film casting method. Furthermore, XRD, FTIR, SEM, TGA, water contact angle, and cell viability were used to characterize the fabrication process of the scaffolds. Rough and porous surface were a mutual morphological properties for all the fabricated scaffolds which may lead to good adhesion and easy transfer of therapeutic fluids and moisture movement through the wound. TGA shows a great thermal stability for CeO 2 /Al2O 3 /GO@HA according to the three stages of degradation that the scaffold went through. These stages started from temperature under 200 °C to the final degradation stage that occurred at 599.2 with mass loss about 67 % of total components. Furthermore, the assessment of cell viability was employed to evaluate the biological compatibility of the scaffold with normal lung cells for a period of three days in vitro. The concentration of the substance was first set at 2500 μg/ml, and the Ic50 value was subsequently discovered to be 625 μg/ml. The decrease in drug concentration is associated with an increase in cell growth that estimated by 95.3 % with 4.4 μg/ml of concentration.

materials science, multidisciplinary
Tannic acid based multifunctional hydrogels with mechanical stability for wound healing

Lanlan Dong,Ru Jia,Zhong Liu,Wurikaixi Aiyiti,Cijun Shuai,Zhongwang Li,Qiang Fu,Xiang Li

DOI: https://doi.org/10.1016/j.colsurfb.2024.114127

Abstract:Conventional wound dressings have poor tissue adhesion and mechanical stability, restricting their applications in dynamic motion environments. Tannic acid (TA) was ideal candidates for current dressing materials due to their well-known antioxidant and anti-inflammatory properties. However, the inevitable polymerization problem of TA limited the one-step synthesis of dressings. Herein, we reported a simple one-pot method to prepare double-network hydrogels containing N-acryloyl glycinamide (NAGA), N-hydroxyethyl acrylamide (HEAA) and TA. The resulting NHT hydrogel exhibited excellent tensile properties, fatigue resistance, and notch insensitivity to ensure mechanical stability under large deformation and stress in vitro. The NHT hydrogel also demonstrated room-temperature self-healing, broad adhesion to various substrates, synergistic swelling ability. In addition, catechol and benzene rings from TA helped shield against UV radiation and acted as free radical scavengers to relieve oxidative stress in wound damage. As a result, full-layer wounds in mice treated with NHT patches showed a higher healing rate, in which epithelialization was completed within 14 days. The integrated function enables hydrogel to maintain mechanical stability in dynamic motion environments with high strain and defects, with great potential for future clinical translation.
Design, characterization and in vitro evaluation of thin films enriched by tannic acid complexed by Fe(III) ions

B. Kaczmarek,O. Mazur,O. Miłek,M. Michalska-Sionkowska,A. Das,A. Jaiswal,J. Vishnu,K. Tiwari,A. Sionkowska,A. M. Osyczka,G. Manivasagam

DOI: https://doi.org/10.1007/s40204-020-00146-z

2020-11-21

Progress in Biomaterials

Abstract:Abstract Materials based on carbohydrate polymers may be used for biomedical application. However, materials based on natural polymers have weak physicochemical properties. Thereby, there is a challenge to improve their properties without initiation of toxicity. The alternative method compared to toxic chemical agents’ addition is the use of metal complexation method. In this study, chitosan/tannic acid mixtures modified by Fe(III) complexation are proposed and tested for potential applications as wound dressings. Thereby, surface properties, blood compatibility as well as platelet adhesion was tested. In addition, the periodontal ligament stromal cells compatibility studies were carried out. The results showed that the iron(III) addition to chitosan/tannic acid mixture improves properties due to a decrease in the surface free energy and exhibited a reduction in the hemolysis rate (below 5%). Moreover, cells cultured on the surface of films with Fe(III) showed higher metabolic activity. The current findings allow for the medical application of the proposed materials as wound dressings.
Chitosan-Hyaluronic Acid Hybrid Film As A Novel Wound Dressing: in Vitro and in Vivo Studies

Haitang Xu,Lie Ma,Haifei Shi,Changyou Gao,Chunmao Han

DOI: https://doi.org/10.1002/pat.906

IF: 3.348

2007-01-01

Polymers for Advanced Technologies

Abstract:Wound dressing with high quality is a kind of highly demanded wound-repairing products. In this article, chitosan (CS) and hyaluronic acid (HA) were used to fabricate a novel wound dressing. CS/HA composite films with high transparency could be fabricated on glass or poly(methyl methacrylate) (PMMA) substrates, but not on poly(tetrafluoroethylene) (PTFE) plate. Along with the increase of HA amount, the resulting films became rougher as detected by atomic force microscopy (AFM). Increased also are water contact angle and water-uptake ratio. By contrast, increase of the HA amount weakened the water vapor permeability (WVP), bovine albumin adsorption, and fibroblast adhesion, which are desirable characteristics for wound dressing. In vivo animal test revealed that compared with the vaseline gauge the CS/HA film could more effectively accelerate the wound healing, and reduce the occurrence of re-injury when peeling off the dressing again. These results demonstrate that the CS mixed with a little amount of HA may produce inexpensive wound dressing with good properties for practical applications. Copyright (C) 2007 John Wiley & Sons, Ltd.
Tissue Adhesive, Biocompatible, Antioxidant, and Antibacterial Hydrogels Based on Tannic Acid and Fungal-Derived Carboxymethyl Chitosan for Wound-Dressing Applications

Kummara Madhusudana Rao,Uluvangada Thammaiah Uthappa,Hyeon Jin Kim,Sung Soo Han

DOI: https://doi.org/10.3390/gels9050354

IF: 4.6

2023-04-23

Gels

Abstract:This study aimed to develop hydrogels for tissue adhesion that are biocompatible, antioxidant, and antibacterial. We achieved this by using tannic acid (TA) and fungal-derived carboxymethyl chitosan (FCMCS) incorporated in a polyacrylamide (PAM) network using free-radical polymerization. The concentration of TA greatly influenced the physicochemical and biological properties of the hydrogels. Scanning electron microscopy showed that the nanoporous structure of the FCMCS hydrogel was retained with the addition of TA, resulting in a nanoporous surface structure. Equilibrium-swelling experiments revealed that increasing the concentration of TA significantly improved water uptake capacity. Antioxidant radical-scavenging assays and porcine skin adhesion tests confirmed the excellent adhesive properties of the hydrogels, with adhesion strengths of up to 39.8 ± 1.2 kPa for 1.0TA-FCMCS due to the presence of abundant phenolic groups on TA. The hydrogels were also found to be biocompatible with skin fibroblast cells. Furthermore, the presence of TA significantly enhanced the antibacterial properties of the hydrogels against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. Therefore, the developed drug-free antibacterial and tissue-adhesive hydrogels can potentially be used as wound dressings for infected wounds.

polymer science
Cross-linked hyaluronic acid hydrogel films: new biomaterials for drug delivery

Yi Luo,Kelly R Kirker,Glenn D Prestwich

DOI: https://doi.org/10.1016/s0168-3659(00)00300-x

IF: 11.467

2000-10-01

Journal of Controlled Release

Abstract:A new hyaluronic acid (HA)-based hydrogel film was prepared and evaluated for use in drug delivery. This biocompatible material crosslinks and gels in minutes, and the dried film swells and rehydrates to a flexible hydrogel in seconds. HA was first converted to the adipic dihydrazide derivative and then crosslinked with the macromolecular homobifunctional reagent poly(ethylene glycol)-propiondialdehyde to give a polymer network. After gelation, a solvent casting method was used to obtain a HA hydrogel film. The dried film swelled sevenfold in volume in buffer, reaching equilibrium in less than 100 s. Scanning electron microscopy (SEM) of the hydrogel films showed a condensed and featureless structure before swelling, but a porous microstructure when hydrated. The thermal behavior of the hydrogel films was characterized by differential scanning calorimetry. The enzymatic degradation of the HA hydrogel films by hyaluronidase was studied using both SEM and a spectrophotometric assay. Drug release from the hydrogel film was evaluated in vitro using selected anti-bacterial and anti-inflammatory drugs. This novel biomaterial can be employed for controlled release of therapeutic agents at wound sites.

pharmacology & pharmacy,chemistry, multidisciplinary
Development of Halloysite Nanohybrids-Based Films: Enhancing Mechanical and Hydrophilic Properties for Wound Healing

Francisco Ramón Rodríguez Pozo,Daiana Ianev,Tomás Martínez Rodríguez,José L. Arias,Fátima Linares,Carlos Miguel Gutiérrez Ariza,Caterina Valentino,Francisco Arrebola Vargas,Pablo Hernández Benavides,José Manuel Paredes,María del Mar Medina Pérez,Silvia Rossi,Giuseppina Sandri,Carola Aguzzi

DOI: https://doi.org/10.3390/pharmaceutics16101258

IF: 6.525

2024-09-28

Pharmaceutics

Abstract:Most of the therapeutic systems developed for managing chronic skin wounds lack adequate mechanical and hydration properties, primarily because they rely on a single component. This study addresses this issue by combining organic and inorganic materials to obtain hybrid films with enhanced mechanical behavior, adhesion, and fluid absorption properties. To that aim, chitosan/hydrolyzed collagen blends were mixed with halloysite/antimicrobial nanohybrids at 10% and 20% (w/w) using glycerin or glycerin/polyethylene glycol-1500 as plasticizers. The films were characterized through the use of Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and electron microscopy. The mechanical properties were evaluated macroscopically using tensile tests, and at a nanoscale through atomic force microscopy (AFM) and nanoindentation. Thermodynamic studies were conducted to assess their hydrophilic or hydrophobic character. Additionally, in vitro cytocompatibility tests were performed on human keratinocytes. Results from FTIR, TGA, AFM and electron microscopy confirmed the hybrid nature of the films. Both tensile tests and nanomechanical measurements postulated that the nanohybrids improved the films' toughness and adhesion and optimized the nanoindentation properties. All nanohybrid-loaded films were hydrophilic and non-cytotoxic, showcasing their potential for skin wound applications given their enhanced performance at the macro- and nanoscale.

pharmacology & pharmacy
Preparation and characterization of tannin-maltodextrin-polyvinyl alcohol hydrogel based on hydrogen bonding for wound healing

Lina Zuo,Xiaoji Wang,Xiaoling Cao,Baiyan Chen,Mengmeng Shao,Guang Yang,Shushu Fu,Li Wang

DOI: https://doi.org/10.1016/j.jmbbm.2023.105942

IF: 4.042

2023-06-26

Journal of the Mechanical Behavior of Biomedical Materials

Abstract:The development of multifunctional and low-cost hydrogel dressings with good mechanical properties, antibacterial activity, and nontoxicity is of great relevance in healthcare. This study aimed to prepare a series of hydrogels consisting of maltodextrin (MD), polyvinyl alcohol (PVA), and tannic acid (TA) through a freeze-thaw cycling technique. Micro-acid hydrogels with different mass ratios (0, 0.25, 0.5, and 1 wt%) were obtained by adjusting the TA content. Among all hydrogels, TA-MP2 hydrogels (with a TA content of 0.5 wt%) showed good physicochemical and mechanical properties. In addition, the biocompatibility of TA-MP2 hydrogels was confirmed by the high cell survival rate of NIH3T3 cells, which was over 90% after 24 h and 48 h of incubation. Additionally, TA-MP2 hydrogels showed multifunctional properties, including antibacterial and antioxidative effects. In vivo experiments showed that TA-MP2 hydrogel dressings significantly accelerated wound healing in a full-layer skin wound model. These findings indicated the potential of TA-MP2 hydrogel dressings in promoting wound healing.

engineering, biomedical,materials science, biomaterials
Antimicrobial polyacrylic acid/tannic acid hydrogel wound dressing facilitating full-thickness skin healing

Changlin Zhou,Lingmin Chen,Wenyan Zhou,Lei Wang,Ruitao Zhang,Chen Yang

DOI: https://doi.org/10.1080/09205063.2023.2300493

2024-01-12

Journal of Biomaterials Science Polymer Edition

Abstract:Polyphenolic compound-modified hydrogel wound dressings with excellent wet tissue adhesion, antimicrobial properties, stretchability, and full-thickness skin healing properties are still extremely rare so far. Polyphenolic compounds such as tannic acid or dopamine can improve the antibacterial and bioadhesive properties of hydrogels, and are also polymerization inhibitors for free radical polymerization. In this study, polyacrylic acid (PAA) aqueous solution was first synthesized, and then antibacterial PAA-TA hydrogel was prepared by mixing it with tannic acid (TA) and the crosslinker 1,6-hexanediol bis(2-methyl-1-propionic acid azide) (HBMAP). This method avoids the hindrance of the phenolic hydroxyl groups in TA on acrylic acid polymerization, and we were able to obtain a series of TA hydrogels (in the range of 0–15 wt.%. We applied these PAA-TA hydrogels to wound dressings and found that they had excellent adhesion to biological tissues, and the tensile strength and elongation at break of PAA-TA hydrogels with 15 wt.%TA content were as high as 1.72 MPa and 1446.3% in tensile strength evaluation. In addition, microbiological analysis showed that wound dressings had significant antimicrobial activity against Staphylococcus aureus and Escherichia coli. In vitro wound healing experiments confirmed that the wound dressing was biocompatible and could significantly promote the healing of full-thickness skin defects in the guinea pig model. Our work describes an injectable, self-healing, antimicrobial hydrogel that may have promising clinical applications as a wound dressing material.

engineering, biomedical,materials science, biomaterials,polymer science
Physicochemical, structural and biological characterisation of poly(3-hydroxyoctanoate) supplemented with diclofenac acid conjugates - Harnessing the potential in the construction of materials for skin regeneration processes

Katarzyna Haraźna,Annabelle T Fricker,Rafał Konefał,Aneta Medaj,Małgorzata Zimowska,Bartosz Leszczyński,Andrzej Wróbel,Andrzej J Bojarski,Ipsita Roy,Maciej Guzik

DOI: https://doi.org/10.1016/j.ijbiomac.2024.131476

Abstract:This study involved creating oligomeric conjugates of 3-hydroxy fatty acids and diclofenac, named Dic-oligo(3HAs). Advanced NMR techniques confirmed no free diclofenac in the mix. We tested diclofenac release under conditions resembling healthy and chronic wound skin. These oligomers were used to make P(3HO) blends, forming patches for drug delivery. Their preparation used the solvent casting/porogen leaching (SCPL) method. The patches' properties like porosity, roughness, and wettability were thoroughly analysed. Antimicrobial assays showed that Dic-oligo(3HAs) exhibited antimicrobial activity against reference (S. aureus, S. epidermis, S. faecalis) and clinical (Staphylococcus spp.) strains. Human keratinocytes (HaCaT) cell line tests, as per ISO 10993-5, showed no toxicity. A clear link between material roughness and HaCaT cell adhesion was found. Deep cell infiltration was verified using DAPI and phalloidin staining, observed under confocal microscopy. SEM also confirmed HaCaT cell growth on these scaffolds. The strong adhesion and proliferation of HaCaT cells on these materials indicate their potential as wound dressing layers. Additionally, the successful diclofenac release tests point to their applicability in treating both normal and chronic wounds.
Polyphenol-mediated hyaluronic acid/tannic acid hydrogel with short gelation time and high adhesion strength for accelerating wound healing

Xin Jin,Chengxiong Wei,Kai Li,Peinan Yin,Chengwei Wu,Wei Zhang

DOI: https://doi.org/10.1016/j.carbpol.2024.122372

2024-10-15

Abstract:Wound healing is a complex process involving a complicated interplay between numerous cell types and vascular systems. Hyaluronic acid (HA)-based hydrogel facilitates wound healing, and is involved in all processes. However, slow gelation speed and weak adhesion strength limit its ability to form a stable physical barrier quickly. Herein, we propose a HA-based composite hydrogel as the wound dressing based on oxidative coupling reaction. Tannic acid and dopamine-coated carbon particles (DCPs) containing abundant phenolic hydroxyl groups are incorporated into the HA-based hydrogel for increasing the number of crosslinking sites of oxidative coupling of the hydrogel and enhancing adhesion through the formation of covalent bonds and hydrogen bonds between hydrogel and wound sites. The composite hydrogel exhibits short gelation time (<6 s) and high adhesion strength (>8.1 kPa), which are superior to the references and commercial products of its kind. The in vitro experiments demonstrate that the hydrogel has low hemolytic reaction, negligible cytotoxicity, and the ability to promote fibroblast proliferation and migration. The in vivo full-thickness skin defect model experiments demonstrate that the hydrogel can accelerate wound healing under mild photothermal stimulation of DCPs by reducing inflammation, relieving tissue hypoxia, and promoting angiogenesis and epithelialization.
Matrix hyaluronic acid and bilayer poly-hydroxyethyl methacrylate-hyaluronic acid films as potential ocular drug delivery platforms

Mohammad Tighsazzadeh,Joshua Boateng

DOI: https://doi.org/10.1016/j.ijbiomac.2024.129496

IF: 8.2

2024-01-24

International Journal of Biological Macromolecules

Abstract:This study aimed to design hydrogel based films comprising hyaluronic acid (HA) to overcome limitations of currently used eye drops. Timolol-loaded crosslinked (X2) HA-based and bilayer (B2) (pHEMA/PVP-HA-based layers) films were designed and characterized. The films were transparent (UV, visual observation) with crosslinked ( 80 %) films. X2 showed significantly higher swelling capacity, tensile strength and elastic modulus (5491.6 %, 1539.8 Nmm −2 , 1777.2 mPa) than B2 (1905.0 %, 170.0N mm −2 , 67.3 mPa) respectively. However, X2 showed lower cumulative drug released and adhesive force (27.3 %, 6.2 N) than B2 (57.5 %, 8.6 N). UV sterilization did not significantly alter physical properties, while SEM and IR microscopy showed smooth surface morphology and homogeneous drug distribution. Timolol permeation (EpiCornealTM/porcine cornea) depended on the film matrix with erodible films showing similar permeation to commercial eyedrops. Drug permeation for porcine cornea (X2 = 549.0.2, B2 = 312.1 μgcm −2 h −1 ) was significantly faster than EpiCornealTM (X2 = 55.2, B2 = 37.6 μgcm −2 h −1 ), but with a linear correlation between them. All the selected optimized films showed acceptable compatibility (MTT assay) with both HeLa cells and EpiCornealTM. In conclusion, crosslinked and bilayer HA based films showed ideal characteristics suitable for potential ocular drug delivery, though further work is required to further optimize these properties and confirm their efficacy including in vivo tests.

polymer science,biochemistry & molecular biology,chemistry, applied
Covalently crosslinked hyaluronan–polygalacturonic acid polymer as the drug carrier and its application in surgery

Hsiu-Hui Peng,Pin-Jan Liu,I-Min Chen,Ming-Wei Lee

DOI: https://doi.org/10.1007/s13726-013-0142-6

IF: 2.485

2013-04-06

Iranian Polymer Journal

Abstract:The composite material based on the hyaluronan (HA) and polygalacturonic acid (PGA) was synthesized for tissue anti-adhesion. HA and PGA were cross-linked covalently by disulfide bonds through thiol oxidation reaction. HA and PGA were grafted with cysteine to yield thiolated HA (HAcys, with thiol content of 337 ± 72 μmol/g) and PGA (PGAcys, with thiol content of 752 ± 77 μmol/g), respectively. A HAcys–PGAcys film was fabricated under physiological conditions, with gel content of 84.8 ± 1.7 % and water content of 46.9 ± 2.2 %. The HAcys–PGAcys film was used as the anti-inflammatory drug (rosmarinic acid (RA)) carrier to prevent postsurgical adhesion. The in vitro dynamic release behavior of RA from the HAcys–PGAcys film was analyzed. The RA-entrapped film displayed release profile with an initial burst about 80 % of loaded RA in the early stage. The late phase release of RA from the HAcys–PGAcys film after 24 h followed the zero order (R2 = 0.978). Animal implant studies of the HAcys–PGAcys and HAcys–PGAcyswith rosmarinic acid (HAcys–PGAcys/RA) films reduced adhesion incidences by 83 and 92 %, respectively. To evaluate the efficiency of a combination of physical barriers and an RA anti-inflammatory drug, white blood cell counts from histological sections was done on day 3 after surgery. The results showed that the number of WBCs in the section with the HAcys–PGAcys/RA film decreased by 26.8 % compared with the section with HAcys–PGAcys film. The newly developed HAcys–PGAcys composite polymer showed great potential as the drug carrier and also for postoperative adhesion prevention.

polymer science
Photo-crosslinked hyaluronic acid hydrogels designed for simultaneous delivery of mesenchymal stem cells and tannic acid: Advancing towards scarless wound healing

Mozhgan Abedanzadeh,Samira Sadat Abolmaali,Reza Heidari,Ehsan Aalaei,Maryam Kaviani,Mahintaj Dara,Samaneh Mohammadi,Negar Azarpira,Ali Mohammad Tamaddon

DOI: https://doi.org/10.1016/j.ijbiomac.2024.136394

Abstract:The quest for scarless wound healing is imperative in healthcare, aiming to diminish the challenges of conventional wound treatment. Hyaluronic acid (HA), a key component of the skin's extracellular matrix, plays a pivotal role in wound healing and skin rejuvenation. Leveraging the advantages of HA hydrogels, this research focuses first on tuning the physicochemical and mechanical properties of photo-crosslinkable methacrylated HA (MAHA) by varying the methacrylation degree, polymer concentration, photo-crosslinker concentration, and UV exposure time. The optimized hydrogel, featuring suitable porosity, swelling ratio, degradability, and mechanical properties, was then used for the combined delivery of tannic acid (TA), known for its hemostatic, antibacterial, and antioxidant properties, and Wharton's jelly-derived mesenchymal stem cells (WJ-MSCs) cultured on the MAHA-TA hydrogel to enhance skin regeneration. The composite MAHA-TA-MSC hydrogel demonstrated favorable pores and biocompatibility, evidenced by cell viability, and promoted cell proliferation. When applied to dorsal wounds in rats, this composite hydrogel accelerated wound healing and reduced scarring. Additionally, molecular and histopathological analyses revealed increased expression of IL-10, the TGF-β3/TGF-β1 ratio, and the Collagen III/Collagen I ratio. These findings suggest that the MAHA-TA-MSC hydrogel is a promising candidate for scarless acute wound healing.
Natural Film Based on Pectin and Allantoin for Wound Healing: Obtaining, Characterization, and Rat Model

Karen Zulema Meza Valle,Rosa A Saucedo Acuña,Judith V Ríos Arana,Naun Lobo,Carlos Rodriguez,Juan Carlos Cuevas-Gonzalez,Karla Lizette Tovar-Carrillo

DOI: https://doi.org/10.1155/2020/6897497

2020-10-17

Abstract:Introduction: In our days, several approaches reported the use of natural compounds in medical applications. Among them, pectin and allantoin are nontoxic, biocompatible, and biodegradable; however, its use for possible wound healing therapeutics is still limited. Pectin and allantoin have been applied in pharmaceutical industry and beauty cosmetic and could be also applied as scaffolds for tissue regeneration, wound healing, and so on. The aim of this study was to combine by the first time two natural ingredients to develop a new biomaterial to treat skin injuries in a rat model. Methods: For the hydrogel development, new synthesis parameters were established for the obtaining of the film such as temperature, mixing velocity and time, and drying temperatures as well. To enrich the film, the allantoin concentrations were set at 90 wt% and 100 wt% of pectin used. By in vivo assay, films were tested in wound healing in female Wistar rats, 190 ± 10 g in weight and 2 months aged. Results: The obtained films comprise 2 well-differentiated layers, one layer rich in allantoin, which will be the regenerative layer, and one rich in pectin, which will work as an antimicrobial and protective layer to the wound. These were characterized by swelling kinetics, Fourier transform of the infrared spectrum of absorption (FTIR) spectroscopy, and contact angle. The morphology and topography were determined by scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). In vivo assay showed remarkable reduce in a time period in a wound healing process when the film was used. The results show that the use of PA (Pectin-Allantoin) hydrogel reduces the total healing time by 25% approximately. Conclusions: Pectin-Allantoin (PA) film has potential use in medical applications as wound healing material promoting healthy tissue renewal.
Biochemical differentiation and intercellular interactions of migratory gonadotropin-releasing hormone (GnRH) cells in the mouse.

I. Livne,M. Gibson,A. Silverman

DOI: https://doi.org/10.1006/DBIO.1993.1271

IF: 3.148

1993-10-01

Developmental Biology

Abstract:GnRH cells are first detected in the olfactory placode of the mouse on Gestational Day 11.5 (E11.5). Between E12.5 and E15.5 they migrate across the nasal septum and by E16.5 attain their adult distribution within the forebrain. In the present study, we used immunocytochemistry at the light and electron microscopic level to study the biochemical and morphological differentiation of gonadotropin-releasing hormone (GnRH) neurons and the cellular associations that they make during this migratory process. On E12.5, when the majority of GnRH cells are still in the nasal septum, only 15% of the population can process the pro-GnRH precursor to the amidated decapeptide. Two days later (E14.5), when most of the cells have advanced into the forebrain, 79% contain mature GnRH. In keeping with these light microscopic observations, ultrastructural analysis reveals that on E12.5 GnRH immunologic reaction product is confined to the outer nuclear envelope and rough endoplasmic reticulum. By E14.5 these migratory cells in the nasal septum have more reaction product in the rough endoplasmic reticulum and some of the Golgi cisternae are also immunopositive. Neurosecretory granules, some of which are immunoreactive, also appear at this stage. We had anticipated that the expression of GAP-43 would coincide with axonal elongation and pathfinding in GnRH neurons. Instead, GAP-43 was expressed at the early migratory stage of GnRH cells and its expression declined rapidly after these neurons had entered the forebrain and commenced axonal outgrowth. Hence, on E12.5, 62.3% of GnRH cells in the nasal septum are immunopositive for GAP-43, while only 12.6% of the forebrain population at the same embryonic stages express the protein. Similarly, on E14.5 GAP-43 is expressed in 50.7% of the nasal septum GnRH cells but only 11.6% of cells in the E14.5 forebrain express this protein. While in the nasal septum, GnRH neurons migrate only within the confines of the olfactory and vomeronasal axonal fascicles. During this part of the migratory route, the cells maintain close membrane apposition with each other and with the axons and ensheathing glia of the nerve fascicles. Once in the forebrain, GnRH neurons no longer maintain these associations, nor do they follow any defined anatomical structure. These findings indicate that although GnRH cells express their unique neuropeptide early in their ontogeny, their differentiation continues and is coordinated with their migration.(ABSTRACT TRUNCATED AT 400 WORDS)
Modification of a Carboxymethyl Cellulose/Poly(vinyl alcohol) Hydrogel Film with Citric Acid and Glutaraldehyde Crosslink Agents to Enhance the Anti-Inflammatory Effectiveness of Triamcinolone Acetonide in Wound Healing

Kanticha Pratinthong,Winita Punyodom,Pensak Jantrawut,Kittisak Jantanasakulwong,Wirongrong Tongdeesoontorn,Montira Sriyai,Rangsan Panyathip,Sarinthip Thanakkasaranee,Patnarin Worajittiphon,Nuttapol Tanadchangsaeng,Pornchai Rachtanapun

DOI: https://doi.org/10.3390/polym16131798

IF: 5

2024-06-25

Polymers

Abstract:Anti-inflammatory wound healing involves targeted drug delivery to the wound site using hydrogel materials to prolong drug effectiveness. In this work, hydrogel films were fabricated using carboxymethyl cellulose (CMC) and poly(vinyl alcohol) (PVA) crosslinked with citric acid (CA) and glutaraldehyde (GA) at different concentrations. The crosslinker densities were optimized with various CA (2–10% w/v) and GA (1–5% v/v) concentrations. The optimized crosslink densities in the hydrogel exhibited additional functional group peaks in the FT-IR spectra at 1740 cm−1 for the C=O stretching of the ester linkage in CA and at 1060 cm−1 for the C-O-C stretching of the ether group in GA. Significantly, the internal porous structures of hydrogel composite films improved density, swelling capacities, solubility percentage reduction, and decreased water retention capacities with optimized crosslinker densities. Therefore, these hydrogel composite films were utilized as drug carriers for controlled drug release within 24 h during medical treatment. Moreover, the hydrogel films demonstrated increased triamcinolone acetonide (TAA) absorption with higher crosslinker density, resulting in delayed drug release and improved TAA efficiency in anti-inflammatory activity. As a result, the modified hydrogel showed the capability of being an alternative material with enhanced anti-inflammatory efficiency with hydrogel films.

polymer science
Preparation and properties of polyvinyl alcohol/tannic acid composite film for topical treatment application

Kyung Hwa Hong

DOI: https://doi.org/10.1007/s12221-016-6886-9

IF: 2.5

2016-12-01

Fibers and Polymers

Abstract:The purpose of this study was to develop an effective potential wound dressing material based on a polyvinyl alcohol (PVA) and tannic acid (TA) composite film. To prepare the PVA/TA films, PVA and TA blended aqueous solutions were cast into film form by spreading the solutions and drying them. Then the films were heat treated at 155 oC for 3 min to promote esterification between the PVA and TA. After removing un-crosslinked moieties from the films by rinsing and drying, the films were investigated by swelling behavior, FTIR spectroscopy, XRD and TGA. And, the antibacterial and antioxidant abilities of the films were also examined in this study. Through this investigation it was discovered that TA effectively acts as a functional antibacterial and antioxidant agent as well as crosslinker in the PVA/TA system. Thus, the PVA/TA composite films prepared by the casting and heat treatment method proposed in this study are expected to be used for topical medication, such as wound dressing material.

materials science, textiles,polymer science

Ozonation of activated carbon and its effects on the adsorption of VOCs exemplified by methylethylketone and benzene.

Hyaluronic Acid/Ellagic Acid as Materials for Potential Medical Application

Tannic acid-reinforced soy protein/oxidized tragacanth gum-based multifunctional hemostatic film for regulation of wound healing

Morphological and biological assessment of films based on hyaluronic acid doped with cerium oxide and aluminum oxide for wound healing applications

Tannic acid based multifunctional hydrogels with mechanical stability for wound healing

Design, characterization and in vitro evaluation of thin films enriched by tannic acid complexed by Fe(III) ions

Chitosan-Hyaluronic Acid Hybrid Film As A Novel Wound Dressing: in Vitro and in Vivo Studies

Tissue Adhesive, Biocompatible, Antioxidant, and Antibacterial Hydrogels Based on Tannic Acid and Fungal-Derived Carboxymethyl Chitosan for Wound-Dressing Applications

Cross-linked hyaluronic acid hydrogel films: new biomaterials for drug delivery

Development of Halloysite Nanohybrids-Based Films: Enhancing Mechanical and Hydrophilic Properties for Wound Healing

Preparation and characterization of tannin-maltodextrin-polyvinyl alcohol hydrogel based on hydrogen bonding for wound healing

Antimicrobial polyacrylic acid/tannic acid hydrogel wound dressing facilitating full-thickness skin healing

Physicochemical, structural and biological characterisation of poly(3-hydroxyoctanoate) supplemented with diclofenac acid conjugates - Harnessing the potential in the construction of materials for skin regeneration processes

Polyphenol-mediated hyaluronic acid/tannic acid hydrogel with short gelation time and high adhesion strength for accelerating wound healing

Matrix hyaluronic acid and bilayer poly-hydroxyethyl methacrylate-hyaluronic acid films as potential ocular drug delivery platforms

Covalently crosslinked hyaluronan–polygalacturonic acid polymer as the drug carrier and its application in surgery

Photo-crosslinked hyaluronic acid hydrogels designed for simultaneous delivery of mesenchymal stem cells and tannic acid: Advancing towards scarless wound healing

Natural Film Based on Pectin and Allantoin for Wound Healing: Obtaining, Characterization, and Rat Model

Biochemical differentiation and intercellular interactions of migratory gonadotropin-releasing hormone (GnRH) cells in the mouse.

Modification of a Carboxymethyl Cellulose/Poly(vinyl alcohol) Hydrogel Film with Citric Acid and Glutaraldehyde Crosslink Agents to Enhance the Anti-Inflammatory Effectiveness of Triamcinolone Acetonide in Wound Healing

Preparation and properties of polyvinyl alcohol/tannic acid composite film for topical treatment application