Abstract:In this study, our primary aim was to increase the presence of amine groups in polyamide 6 fibers. To achieve this, we employed a functionalization process that mainly depended on increasing the number of reactive sites via acid-catalyzed hydrolysis. The effects of several acids were rigorously examined, including hydrochloric acid (HCl), sulfuric acid (H2SO4), and formic acid (HCOOH). Following this comprehensive acid-based treatment, the method that demonstrated the most significant increase in amine groups was selected for further evaluation in dyeing experiments and full characterization. The quantification of amino groups was performed using potentiometry, evaluating the equilibrium state of acid removal from the fibers. To corroborate these results, the acid dye Levaset Blue 2R was employed, which measured the amount of dye bound to the fibers during the dyeing process. Characterization of the polyamide 6 fiber structural changes was conducted using multiple techniques, including tensile tests, Fourier transform infrared (FTIR) spectroscopy, and differential scanning calorimetry (DSC). Among the acid treatments, the 11% HCl treatment exhibited the most significant increase in amine groups, amounting to an approximately 110% increase as measured by potentiometry and an approximately 150% increase using the dyeing method. During the dyeing process, the 11% HCl-treated fibers absorbed 91% of the dye from the dye bath, indicating enhanced color intensity and K/S value, thus affirming the efficacy of the amine group increasing. Tensile testing revealed a decrease in the strength of the functionalized fiber. In the FTIR spectra, there was a notable increase in the intensity of bands associated with the fiber's crystalline regions and hydrogen bonds. DSC tests validated the FTIR results, demonstrating a 9% increase in crystallinity. Furthermore, SEM micrographs depicted surface alterations induced by the hydrolysis process. These results collectively highlight the effectiveness of hydrolysis in introducing functional groups, enhancing color intensity during dyeing with acid dyes, and reducing dye content in the bath. Additionally, the potentiometric method for quantifying amine group demonstrated practicality and accuracy, serving as a valuable contribution to the field.

Application of different concentrations of the natural dye potassium norbixinate (annatto) in polyamide 6.6 fabrics

Optimal process conditions to recycled polyester dyeing using natural annatto dye

Environmentally Friendly Coloration of Polyamide Fabrics with the Use of Natural Dyes: A Study Including Results of Industrial Scale Applications

Exploring the dyeing potential of annatto dye on linen substrate: An inquiry into the effects of different mordants

Electrokinetic and Thermodynamic Analysis of the Dyeing Process of Polyamide Fabric with Mordant Black 17

An Investigation of Verbascum thapsus Flower as a Natural Source for Nylon 6 Fabric Dyeing

Bio Dyeing of Nylon 6 Fabrics Using Beetroot and Natural Mordants

Enhancing polyamide 6: Acid hydrolysis for functionalization and amino group quantification

Use of the β-Cyclodextrin Additive as a Good Alternative for the Substitution of Environmentally Harmful Additives in Industrial Dyeing Processes

Optimization of Dyeing Process of Natural Dye Extracted from Polyalthia longifolia Leaves on Silk and Cotton Fabrics

Discussion on Factors Affecting Dyeing of Bio-based Polyamide 5,6 Fibers Compared with Polyamide 6,6 Fibers

Investigation of stain-resistant cationic dyeable nylon 6 modified with sodium salt of 5-sulfoisophthalic acid and polyethylene glycol

Enzymatic coloration of polyamide fabrics and its comparison with conventional dyeing

Eco-Friendly Dyeing Processes of Nylon 6.6 Woven Fabrics with Used Coffee Grounds (UCG)

Application of natural dyes from selected indigenous plants on cotton and silk fabrics

Some Experiments on the Dyeing of Nylon Yarn

Green extraction of colorants from achiote seeds for dyeing mordanted nylon fabric

Dope dyeing of tannic acid modified ultra‐high molecular weight polyethylene fabric

More efficient usage of natural dyes through incorporation of cationic polymer into viscose fibres

Mordant Free Dyeing and Functionalization of Wool Fabrics with Biocolorants Derived from Apocynum venetum L. Bast

Surface functionalization of polyamide fiber via dopamine polymerization