Abstract:Background: Chlorophenols (CPs) constitute a group of organic pollutants that are introduced into the environment as a result of several man-made activities, such as uncontrolled use of pesticides and herbicides, and as byproducts in the paper pulp bleaching. Promising removal technologies of chlorinated aromatics consist in the application of advanced oxidation processes (AOPs) that can provide an almost total degradation of a variety of contaminants. Among these, wide application find Fenton systems based on generation of reactive species having a high oxidizing power, such as hydroxyl radical HO*. Our objective was that of determining the overall degradation efficiency of the model compound 2,4-dichlorophenol (DCP) by thermal Fenton-type oxidation systems with a view toward defining in more details relevant process parameters, the effect of reaction temperature and of co-catalyst Cu2+. Methods: Reaction conditions were similar to those generally adopted as optimal in many practical applications, i.e. pollutant/Fe2+ (as FeSO4) ratio ca. 20, Fe2+/Cu2+ (co-catalyst) 2:1, pH adjusted and controlled at pH 3, and H2O2 in excess (up to four-fold over the stoichiometric amount required for complete mineralization). Results and discussion: The results demonstrate that it is advantageous to carry out the reaction at a temperature markedly higher (70 degrees C) than ambient. The stepwise addition of H2O2 in aliquots yields an efficient transformation, while allowing a convenient control of the reaction exothermicity. Under these conditions, the essentially complete removal of the initial DCP is accomplished using just one equiv of H2O2 during 15 min; excess H2O2 (5 equivalents) yields extensive substrate mineralization. Also relevant, at 70 degrees C dechlorination of the initial DCP (and of derived reaction intermediates) is remarkably extensive (3-5% residual TOX), already with the addition of 1 equiv of H2O2. At the end of the reaction, IC and IC-MS analyses of the solution reveal that only low-molecular weight carboxylic acid (acetic, formic, oxalic, malonic, tartaric, etc.) contribute to the residual TOC. Conclusions: The whole of the results herein point to the advantage of performing the process at temperatures substantially higher than ambient (70 degrees C). Under the conditions adopted, almost complete degradation of the initial toxic compound can be achieved using hydrogen peroxide in fair excess (e.g., 3.5 equiv H2O2). Recommendations and outlook: In applying practical Fenton-type degradation systems to heavily polluted wastes, either for the pre-treatment of waters with a high COD value prior to biodegradation or for complete mineralization of pollutants, the set up of appropriate reaction conditions appears to be a key factor. Also, it is desirable to keep the concentration of iron salts within the lower limits in order to minimize the production and disposal of iron oxide sludges.

Applying bottom ash as an alternative Fenton catalyst for effective removal of phenol from aqueous environment

Preparation of SnO2–TiO2/Fly Ash Cenospheres and Its Application in Phenol Degradation

Applicability of Coal Bottom Ash from Thermoelectric Power Plant as an Alternative Heterogeneous Catalyst in Photo-Fenton Reaction

Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Iron-bearing mining reject as an alternative and effective catalyst for photo-Fenton oxidation of phenol in water

Phenol Degradation in an Electrochemical System with TiO2/activated Carbon Fiber As Electrode

Selective Conversion of Organic Pollutant P-Chlorophenol to Formic Acid Using Zeolite Fenton Catalyst

Electrochemical degradation of phenol by in situ electro-generated and electro-activated hydrogen peroxide using an improved gas diffusion cathode

Immobilized Fe~(3+)-fly ash:an efficient heterogeneous photo-Fenton oxidation catalyst for the degradation of phenol

Enhanced removal of phenol from biorefinery wastewater treatment using enzymatic and Fenton process

Fe2O3/coal Fly Ash Fenton-like Catalyst for the Elimination of Organic Pollutants in Wastewater: Kinetic, Mechanism, and Application Feasibility

Practical applications of the Fenton reaction to the removal of chlorinated aromatic pollutants. Oxidative degradation of 2,4-dichlorophenol

Degradation of Phenol by Heterogeneous Phase Fenton Reagent Oxidation Process with Fe2+/Activated Carbon Catalyst

Recyclable Fenton-like Catalyst Based on Zeolite Y Supported Ultrafine,highly-Dispersed Fe 2 O 3 Nanoparticles for Removal of Organics under Mild Conditions

α-Fe2O3 nanosheets as Electro-Fenton catalyst for highly efficient phenol degradation

Degradation of phenol by metal-free electro-fenton using a carbonyl-modified activated carbon cathode: Promoting simultaneous H2O2 generation and activation

Photochemically Enhanced Degradation of Phenol Using Heterogeneous Fenton-type Catalysts.

An Effective and Magnetic Fe2O3-ZrO2 Catalyst for Phenol Degradation under Neutral Ph in the Heterogeneous Fenton-like Reaction

A highly active bimetallic oxides catalyst supported on Al-containing MCM-41 for Fenton oxidation of phenol solution

A novel Cu/Fe cathode prepared by a facile redox pathway for phenol degradation electrocatalytically via the electro-fenton assisted electro-chlorination process

Decontamination of hazardous waste containing phenol by modified Fenton reagent