Two new Keratella, rotatoria, from Australia

Bruno Bērziņš

DOI: https://doi.org/10.1007/BF01025950

IF: 2.822

1963-09-01

Hydrobiologia

Abstract:

What problem does this paper attempt to address?

Polyvinylpyrrolidone-assisted building of slice-like bread SnO2 for microwave absorption and radar cloaking

Jialei Lu,Yishan Wang,Longxin Wang,Dongdong Liu,Lijuan Zhou,Chuncheng Wei,Guangwu Wen,Xueqian Zhang,Xiaoxiao Huang

DOI: https://doi.org/10.1016/j.colsurfa.2024.133391

2024-04-01

Abstract:In recent years, the variety electronic products and communication devices have been growing, massively exacerbating the hidden harmful electromagnetic radiation pollution. The development of wave-absorbing materials with highly efficient wave-absorbing properties has great application prospects, both for military and civilian applications. Here, we make up for the disadvantages of weak absorption and narrow bandwidth of SnO2 materials by morphology modulation to compensate and construct oxygen vacancies, which achieves a win-win situation. The sliced bread-like SnO2 is fabricated by hydrothermal method and heat treatment using stannous chloride as the tin source supplemented with polyvinylpyrrolidone surfactant to modulate the morphology. The results reveal that the SnO2 samples obtained by heat treatment at 160 °C have excellent broadband absorption properties, with an effective absorption bandwidth of up to 2.08 GHz, and the lowest reflection loss of − 33.89 dB at the thickness of 1.5 mm. The results are due to the well-dispersed SnO2 flakes improving the impedance matching, and the multiple heterointerfacials and oxygen vacancies defects bringing about an effective polarization loss. Electromagnetic simulation software simulates the far-field electromagnetic response of sliced bread-like SnO2, and the attenuation value of the RCS of sliced bread-like SnO2 reaches 20.03 dB·m2 at the thickness of 2.5 mm and 0 ° incidence of electromagnetic wave.

chemistry, physical
3D Flower-Like Co-based Oxide Composites with Excellent Wideband Electromagnetic Microwave Absorption

Chenxi Wang,Bingbing Wang,Xin Cao,Jiawei Zhao,Lei Chen,Liangang Shan,Haonan Wang,Guanglei Wu

DOI: https://doi.org/10.1016/j.compositesb.2020.108529

2021-01-01

Abstract:Transition metal oxides because of their excellent dielectric properties have been population for electromagnetic wave absorption application. In this paper, through two-step synthesis, hollow CoSnO3 was in-situ growth between layers of self-assembled flower-like ZnCo2O4 in the solvothermal process. The multi-layer sheet structure of ZnCo2O4 nanoflowers provides growth space for CoSnO3, which can increase interface polarization and natural resonance. Hybrid structure expands the propagation path of electromagnetic waves and the times of reflections and scattering. By adjusting the content of the growing process of CoSnO3, the maximum reflection loss (RL) at 12.4 GHz was -56.0 dB, and the wide effective absorption bandwidth (EAB) of 6.24 GHz (RL <-10 dB) was obtained at a thin matching thickness of 2.6 mm ZnCo2O4@CoSnO3 composites showed satisfactory impedance matching in the frequency range of 2-18 GHz. Therefore, ZnCo2O4@CoSnO3 composites provides new research idea for electromagnetic wave absorption in morphology designed.
Enhanced Polarization from Hollow Cube-like ZnSnO3 Wrapped by Multiwalled Carbon Nanotubes: As a Lightweight and High-Performance Microwave Absorber.

Lei Wang,Xiao Li,Qngqing Li,Yunhao Zhao,Renchao Che

DOI: https://doi.org/10.1021/acsami.8b05414

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:Polarization and conduction loss play fundamentally important roles in the nonmagnetic microwave absorption process. In this paper, a uniform and monodisperse hollow ZnSnO3 cube wrapped by multiwalled carbon nanotubes (ZSO@CNTs) was successfully synthesized via facile hydrothermal treatment. A reasonable mechanism related to Ostwald ripening was proposed to design the varied ZSO@CNTs for the special hollow conductive network. Scanning electron microscopy images clearly indicate that reaction temperature is the key factor for the composite structure, which has a significant effect on its electromagnetic properties. Electron holography proves the inhomogeneous distribution of charge density in the ZSO@CNT system, leading to the occurrence of interface polarization. Complex permittivity properties of ZSO@CNT composites under different reaction temperatures were investigated to optimize the morphology that can distinctly enhance microwave absorption performance. The maximum reflection loss that the ZSO@CNT-130 degrees C composite can reach is -52.1 dB at 13.5 GHz, and the absorption bandwidths range from 11.9 to 15.8 GHz with a thickness as thin as 1.6 mm. Adjusting the simulation thicknesses from 1 to 5 mm, the efficient absorption bandwidth (RL < -10 dB) that the ZSO@CNT composite could reach was 14.16 GHz (88.8% of 2-18 GHz). The excellent microwave absorption performance may be attributed to the synergistic effects of polarization, conduction loss, and special hollow cage structure. It is proposed that the specially controlled structure could provide an effective path for achieving a high-performance microwave absorber.
In situ growing fusiform SnO 2 nanocrystals film on carbon fiber cloth as an efficient and flexible microwave absorber

Shikun Hou,Ying Wang,Feng Gao,Fengyuan Wang,Hua Yang,Fei Jin,Gongxun Bai,Zhihai Cao,Yunchen Du

DOI: https://doi.org/10.1016/j.matdes.2022.111576

2023-01-05

Abstract:Developing highly efficient flexible microwave absorber is of great significance for wearable electronics and aerospace applications. In this work, the fusiform SnO 2 nanocrystals film in situ grown on flexible carbon fiber cloth is rationally designed and fabricated through combining air calcination and hydrothermal synthesis. X-ray photoelectron spectrum confirms fusiform SnO 2 nanocrystals film and carbon fiber cloth are effectively integrated with strong chemical bonds of COSn. The as-prepared composite exhibits strong reflection loss of −49.1 dB (2.6 GHz) and wide effective absorption bandwidth of 5.8 GHz (11.6–17.4 GHz) with a thin matched thickness of 1.6 mm, surpassing to pure carbon fiber cloth and many SnO 2 /carbon-based microwave absorbers. The efficient performance originates from well-matched characteristic impedance and multifarious electromagnetic attenuation mechanisms, i.g. , dipole orientation polarization, interfacial polarization relaxation, conductive loss, and multiple reflections/scatterings. Especially, differential charge density calculation reveals the uneven charge distribution at SnO 2 /C interface, which is believed to remarkably enhance interfacial polarization relaxation and contribute to microwave absorption. Our results illustrate that the ingenious integration of nanomaterials on carbon fiber cloth promises a way to achieve efficient and flexible microwave absorbers.

materials science, multidisciplinary
Construction of Hierarchical Yolk-Shell Co/N-Dope C@void@C@MoS2 Composites with Multiple Heterogeneous Interfaces toward Broadband Electromagnetic Wave Absorption

Xiangling Liu,Jiahao Wang,Jiahao Zhong,Lizheng Meng,Jiangni Yun,Jintao Bai,Gang Wang,Junfeng Yan

DOI: https://doi.org/10.1021/acsami.3c16307

2024-02-14

Abstract:The synthesis of materials with a multicomponent hierarchical structure is an essential strategy for achieving high-performance electromagnetic wave (EMW) absorption. However, conventional design strategies face challenges in terms of the rational construction of specific architecture. In this study, we employ a combined space-restricted and hierarchical construction strategy to surface-plant MoS2 nanosheets on yolk-shell structural carbon-modified Co-based composites, leading to the development of high-performance Co/NC@void@C@MoS2 absorbers with advanced architecture. The surface-planted MoS2 nanosheets, the Co/NC magnetic yolk, and the dielectric carbon shell work together to enhance the impedance matching characteristics and synergistic loss capabilities in the composites. Experimental results indicate that Co/NC@void@C-700@MoS2 exhibited the best absorption performance with an effective absorption bandwidth of 7.54 GHz (at 2.05 mm) and a minimum reflection loss of -60.88 dB (at 1.85 mm). Furthermore, radar cross-section simulation results demonstrate that Co/NC@void@C-700@MoS2 effectively suppresses the scattering and transmission of EMWs on perfect electric conductor substrates, implying its superior practical application value. This study provides inspiration and experimental basis for designing and optimizing EMW absorption materials with hierarchical yolk-shell architecture.
Heterostructured CoFe@N-doped carbon porous polyhedron for efficient microwave absorption

Dan Wu,Yiqun Wang,Shuanglin Deng,Di Lan,Zhongning Xiang,Qinchuan He

DOI: https://doi.org/10.1007/s12274-022-5341-z

IF: 9.9

2022-12-24

Nano Research

Abstract:The synthesis of wide bandwidth, thin thickness, and high performance microwave absorbing materials has become a hot topic of current research. Metal-organic frameworks with heterojunctions and porous structures are considered as suitable candidates to meet these characteristics. Herein, heterogeneous CoFe@N-doped porous carbon polyhedron composites were successfully synthesized via Fe 2+ to replace Co in zeolite imidazole frame-67. The dielectric properties of composites were enhanced by the replacement of Fe 2+ , and the synergistic effect of dielectric loss and magnetic loss was realized. The petal-like lamellar structure increases the travel of electromagnetic (EM) waves, and the formation of porous structures improves impedance matching. Specifically, a reflection loss of −67.30 dB was obtained at a thickness of 2.88 mm, and an ultrabroad wide effective absorption bandwidth of 8.40 GHz was obtained, covering most of the X-band (8–12 GHz) and the whole Ku-band (12–18 GHz). The radar cross section (RCS) reduction value can reach 29.4 dB·m 2 , which means that the radar detector has a smaller probability of detecting targets. This work describes the unique advantages of metal ion replacement metal-organic frameworks derived materials in structural design, impedance matching, and performance adjustment, and provides a new reference for the field of electromagnetic wave absorption.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Experiences of Children With Gay Fathers

E. Perrin,E. Pinderhughes,Kathryn Mattern,Sean M. Hurley,Rachel A Newman

DOI: https://doi.org/10.1177/0009922816632346

2016-03-09

Abstract:An online survey was distributed via snowball sampling and resulted in responses from 61 gay fathers raising children in 2 states. Fathers reported on the barriers they experienced and the pathways they took to becoming parents. They reported also on experiences of stigma directed at them and their children, especially from family members, friends, and people in religious institutions. Despite these difficulties they reported that they engaged actively in parenting activities and that their child(ren)’s well-being was consistent with national samples.
Boosted interfacial charge dynamics on the SnO2/SnS2 heterointerface by gradient sulfur diffusion for microwave absorption and electric–thermal conversion

Zhenkuang Lei,Mingqiang Ning,Xueheng Zhuang,Qikui Man,Baogen Shen

DOI: https://doi.org/10.1039/d3ta04921c

IF: 11.9

2023-10-28

Journal of Materials Chemistry A

Abstract:The engineering of heterogeneous interfaces is an effective way to develop high-performance electromagnetic wave (EMW) absorbing materials. In this work, density functional theory (DFT) calculations were used to predict the SnO 2 /SnS 2 heterointerface effect for boosting electromagnetic wave loss. Then a method for constructing SnO 2 /SnS 2 heterostructures by modulating the SnO 2 precursor on carbon cloth (CC) with controlled sulfurization is proposed. Benefiting from the introduction of SnO 2 /SnS 2 heterostructures, the S-2 absorber achieves a minimum reflection loss (RL min ) of −50.9 dB and maximum EAB up to 4.18 GHz with a matching thickness of 5.0 mm and 1.5 mm. Moreover, the materials also exhibit strong hydrophobicity and high electrical conductivity, giving them potential applications such as self-cleaning, and good electrical and thermal properties. This study provides an insight into the mechanism of heterogeneous interfaces for enhancing the attenuation capability of EMW and opens avenues for developing high-performance absorbers.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Fire-retardant and thermal insulating honeycomb-like NiS2/SnS2 nanosheets @ 3D porous carbon hybrids for high-efficiency electromagnetic wave absorption

Yanyan Dong,Xiaojie Zhu,Fei Pan,Zhen Xiang,Xiang Zhang,Lei Cai,Wei Lu

DOI: https://doi.org/10.1016/j.cej.2021.131272

IF: 15.1

2021-12-01

Chemical Engineering Journal

Abstract:Searching for electromagnetic wave (EMW) absorbers with high-efficient absorption and multi-functionalization is very eager to satisfy modern society’s technical requirements. Inspired by nature, popcorn-derived honeycomb-like NiS2/SnS2 nanosheets @ 3D porous carbon hybrids (PC-NSS) were fabricated through hydrothermal and carbonization methods. As multifunctional electromagnetic wave absorption (EMA) materials, PC-NSS exhibited preeminent infrared stealth property, thermal insulation capability and flame retardance. By adjusting the carbonization temperatures, an excellent EMA performance with a reflection loss (RL) of −52.97 dB and an effective absorption bandwidth (EAB) of 4.8 GHz at 1.57 mm was assigned to PC-NSS. The outstanding EMA performance could be attributed to the synergistic effect of impedance matching, conduction loss, polarization loss, and multiple reflections. The multi-functionality of the thermal insulation capability, the flame retardance, and the EMA performance in PC-NSS hybrids guarantee their practical stealth application in harsh environments. Therefore, this work sheds light on the rational design and fabrication of multifunctional EMW absorption materials for practical applications.

engineering, chemical, environmental
Synthesis of Fe3O4@SiO2@C/Ni microspheres for enhanced electromagnetic wave absorption

Zhen Jia,Jingyun Zhang,Fanglin Lv,Yunxi Hou,Jianfeng Liu,Shitao Yu,Shiwei Liu,Lu Li,Yue Liu

DOI: https://doi.org/10.1016/j.jnoncrysol.2023.122659

IF: 4.458

2023-12-01

Journal of Non-Crystalline Solids

Abstract:With the rapid development of electromagnetic and radar technology, military stealth technology has become an essential measure of a country's military strength. In this paper, hydrothermal and improved Stober methods prepared the composite absorbing material Fe3O4@SiO2@C/Ni with a double core-shell structure. The minimum reflection loss of the sample is −38.9 dB, and the maximum effective bandwidth is 10.1 GHz. By changing the thickness of the carbon layer and the thickness of the SiO2 layer, the absorption performance of the prepared sample can be adjusted to achieve the best impedance matching. The synergistic effect of the composite's dielectric loss and magnetic loss improves its microwave absorption capacity, making it a promising choice for absorptive material applications.

materials science, multidisciplinary, ceramics
Enhanced Electromagnetic Wave Absorption of SiOC/Porous Carbon Composites

Wen Yang,Li Li,Yongzhao Hou,Yun Liu,Xinwei Xiao

DOI: https://doi.org/10.3390/ma15248864

IF: 3.4

2022-12-12

Materials

Abstract:Carbon-based materials have been widely explored as electromagnetic (EM) wave absorbing materials with specific surface areas and low density. Herein, novel porous carbon/SiOC ceramic composites materials (porous C/sp-SiOC) were prepared from the binary mixture, which used the low cost pitch as carbon resource and the polysilylacetylene (PSA) as SiOC ceramic precursor. With the melt-blending-phase separation route, the PSA resin formed micro-spheres in the pitch. Then, numerous SiOC ceramic micro-spheres were generated in porous carbon matrices during the pyrolysis process. By changing the percent of SiOC, the microstructure and wave absorption of porous C/sp-SiOC composites could be adjusted. The synergistic effect of the unique structure, the strong interfacial polarization, and the optimized impedance matching properties contributed to the excellent absorption performance of porous C/sp-SiOC composites. The minimum reflection loss for porous C/sp-SiOC absorber reached −56.85 dB, and the widest effective bandwidth was more than 4 GHz with a thickness of only 1.39 mm. This presented research provides an innovative and practical approach to developing high-performance porous carbon-based microwave absorption materials from green chemistry.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Construction of three-dimensional mesh porous Mo 2 C/carbon composites by chitosan salting-out for efficient microwave absorption

Yue Zhang,Yuan Fang,Xingwang Hou,Jiayue Wen,Jun Chen,Shuai Wang,Kunyao Cao,Weiping Ye,Rui Zhao,Wenjian Wang,Weidong Xue

DOI: https://doi.org/10.1016/j.carbon.2023.118323

IF: 10.9

2023-08-02

Carbon

Abstract:Constructing conductive network and adjusting impedance matching are effective ways to enhance the microwave absorption capacity of absorbers. However, the experimental procedures for preparing three-dimensional porous network are complex and often involve the use of hazardous agents. We proposed a simple and safe strategy to prepare porous three-dimensional network Mo 2 C/C composites. The salting-out method can change the aggregation state of chitosan macromolecules and make the free chitosan molecules form a porous three-dimensional network structure autonomously. In addition, the plus-charged amino on chitosan is able to attract minus-charged molybdate ions, which makes the surface of the 3D structured chitosan precursor covered with molybdenum-containing species. The result shows that the porous mesh structure and the heterogeneous interfaces combine to achieve excellent absorption performance of Mo 2 C/C with effective absorption bandwidth of 5.04 GHz at 1.8 mm. This work demonstrates that salting-out method broadens the idea of porous three-dimensional network electromagnetic wave absorbing materials.

materials science, multidisciplinary,chemistry, physical
Construction of heterostructured SnS2/SnS@graphene oxide composite with highly effective microwave absorption

Qianqian Ren,Jing Wang,Yanzhao Hu,Wei Li,Wu Zhao,Han Zhang,Jiangni Yun,Junfeng Yan,Zhiyong Zhang,Yingnan Wang

DOI: https://doi.org/10.1039/d3tc03282e

IF: 6.4

2023-12-28

Journal of Materials Chemistry C

Abstract:Constructing electromagnetic wave (EMW) absorbers with thin thickness, strong reflection loss and wide absorption bandwidth is an effective strategy to deal with electromagnetic radiation pollution. In this work, SnS@graphene oxide (GO, SG1), SnS2@GO (SG2) and SnS2/SnS@GO (SG3) composites were successfully synthesized by hydrothermal method, freeze-drying and annealing process, respectively. The effective absorption bandwidth (EAB) of SG1 can reach 5.70 GHz (from 12.30 to 18.00 GHz) when the matching thickness is 1.68 mm. The minimum reflection loss (RLmin) of the synthesized SG2 composite is -52.79 dB, and the EAB is 6.64 GHz (11.36-18.00 GHz, matching thickness is 2.52 mm). SG3 composites show better EMW absorption properties than SG1 and SG2. The EAB can reach 7.18 GHz (10.82-18.00 GHz), and the matching thickness is 2.00 mm. The excellent EMW absorption performance of SG3 is attributed to enhanced conduction loss, dipole polarization and interface polarization. Once the EMW enters the absorber, the flower-like structure provides many reflection and scattering paths. These results indicate that SnSx@GO composites can be used as potential candidates for efficient and broadband EMW absorbers.

materials science, multidisciplinary,physics, applied
Facile Synthesis of Sn/Reduced Graphene Oxide Composites With Tunable Dielectric Performance Toward Enhanced Microwave Absorption

Tian Tian Li,Long Xia,Tao Zhang,Bo Zhong,Jianghao Dai,Xiao Tian,Xiao Xiao Huang,Guangwu Wen

DOI: https://doi.org/10.3389/fmats.2020.00108

2020-05-12

Frontiers in Materials

Abstract:Electromagnetic (EM) wave absorbing materials are strongly desired for the reason that EM pollution has become a serious problem with the rapid development of modern technology, which brings harm to the environment and human health. Herein, nanocomposites of Sn/reduced graphene oxide (Sn/rGO) as a novel type of EM absorbing materials were synthesized via a facile and efficient strategy. Nanoscale SnO2 microspheres were synthesized by sol-gel method, and the Sn/rGO composites were obtained after hydrothermal process with GO. Samples with different Sn content were fabricated (rGO:Sn = 30:1, 20:1, 10:1, mass ratio), and their EM wave absorption performance were analyzed. By changing the mass ratio of Sn and rGO, dielectric constant of the composites can be adjusted, and better impedance matching can be achieved. The unique capacitive structure and conductive network enable the material to have strong dielectric loss and excellent absorption performance. This research offers a new route for designing and fabricating high-frequency EM wave absorbing materials.

materials science, multidisciplinary
Construction of Co2NiO4@MnCo2O4.5 nanoparticles with multiple hetero-interfaces for enhanced electromagnetic wave absorption

Yi Zhang,Shujuan Tan,Zhuoting Zhou,Xiaomeng Guan,Yu Liao,Chen Li,Guangbin Ji

DOI: https://doi.org/10.1016/j.partic.2022.12.013

IF: 3.5

2023-10-01

Particuology

Abstract:Nanocomposites with heterogeneous structures and magneto-electric synergistic losses have broad prospects for improving electromagnetic wave (EMW) absorption performance. In this study, we synthesized Co2NiO4@MnCo2O4.5 nanoparticles with abundant hetero-interfaces and multiple magneto-electric loss mechanisms by a facile hydrothermal method. The excess 0.5 oxygen atoms in MnCo2O4.5 produce more vacancies and contribute to the enhancement of electrical conductivity. Sequential nanoneedle clusters facilitate multiple reflections and absorption of EMW in the materials, which are accompanied by an abundance of heterogeneous interfaces to improve the dielectric loss. The Co2NiO4@MnCo2O4.5 composites showed a minimum reflection loss (RLmin) of −30.01 dB and a superior effective absorption bandwidth (EAB) of 6.12 GHz (11.88 GHz–18 GHz) at a thickness of 2.00 mm. Computer Simulation Technology (CST) revealed that the obtained particles show very low radar cross-section (RCS) values and almost full coverage angles. The maximum reduction of RCS at vertical incidence reaches 19.98 dB m2. The Co2NiO4@MnCo2O4.5 nanoparticles exhibit outstanding radar attenuation properties, which can effectively inhibit the reflection and scattering of EMW. Therefore, the prepared Co2NiO4@MnCo2O4.5 absorbers have great application potential in the field of EMW absorption.

materials science, multidisciplinary,engineering, chemical
A facile fabrication and high-performance electromagnetic microwave absorption of ZnO nanoparticles

Mei Cai,Anze Shui,Xuan Wang,Chao He,Junjie Qian,Bin Du

DOI: https://doi.org/10.1016/j.jallcom.2020.155638

IF: 6.2

2020-11-01

Journal of Alloys and Compounds

Abstract:Electromagnetic microwave absorption materials are highly desired in electronics application in recent years. Herein, ZnO nanoparticles were successfully fabricated via sonochemical process using zinc acetate dihydrate (Zn(CH3COO)2·2H2O) and ammonia water as raw materials. The as-prepared ZnO nanoparticles annealed at 120 °C for 8 h had significantly enhanced electromagnetic microwave absorption properties. This could be attributed to dielectric loss originating from interface polarization, and dipole polarization due to oxygen vacancy defects. The minimum reflection coefficient reached −37.7 dB at 8.96 GHz with a small thickness of 2.1 mm. This work provides a new idea of preparing electromagnetic microwave absorption materials (MAMs) with strong absorbing properties.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Construction of the N, S co-doped C/FeS 2 materials for low thickness and high-efficiency microwave absorption

Xinyu Guo,Zhihong Wu,Jijin Chang,Dan Niu,Anwen Ren,Yifan Xu,Peng Li,Huafeng Zhou

DOI: https://doi.org/10.1016/j.surfin.2024.104063

IF: 6.2

2024-02-22

Surfaces and Interfaces

Abstract:Research into electromagnetic wave-absorbing materials is essential to tackle the growing impact of electromagnetic wave pollution on human health and social advancement. Therefore, a method for synthesizing N,S co-doped C/FeS 2 porous carbon composite absorbers (N,S@APCs) with low thickness, low filler content, and high performance is reported. The porous carbon structures were prepared by a high-temperature-hydrothermal two-step method using directly liquefied coal pitch as the carbon source. The successful doping of diatomic N and S at optimal concentrations enhances their impedance matching capacity. At the same time, forming FeS 2 through the reaction between S and Fe 3+ in the raw material efficiently improves the dielectric loss effect and enhances interfacial and dipole polarization effects. These factors together contribute to the strong absorption performance and low matching thickness of the fabricated N, S@APCs. At a thickness of 1.5 mm, 10 wt% of absorber filling resulted in a strong absorption performance with RL min =-51.05 dB. Meanwhile, at a thickness of 1.7 mm, an effective absorption bandwidth of 4.76 GHz was achieved. This research offers a novel viewpoint on investigating porous carbon absorbers at low thicknesses. It serves as a reference for later investigations into polyatomic co-doped porous carbon absorbers.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Yolk-shell structured Co@SiO2@Void@C nanocomposite with tunable cavity prepared by etching of SiO2 as high-efficiency microwave absorber

Baolei Wang,Qian Wu,Yonggang Fu,Tong Liu

DOI: https://doi.org/10.1016/j.jcis.2021.03.011

IF: 9.9

2021-07-01

Journal of Colloid and Interface Science

Abstract:Nowadays, high-performance microwave absorption materials with light weight, strong absorbing intensity and wide absorption bandwidth are urgently demanded to solve the electromagnetic pollution issues. In this work, the yolk-shell structured Co@SiO2@Void@C nanocomposites with tunable cavity are obtained by etching SiO2 in the Co@SiO2@C nanoparticles. They exhibit better microwave absorption properties than the unetched counterpart. When the etching time is 6 h, the Co@SiO2@Void@C nanocomposite shows high absorption efficiency with a minimum reflection loss (RL) value of -44.5 dB at 8.8 GHz. Notably, its effective absorption bandwidth (RL < -10 dB) is as wide as 8.0 GHz (9.7-17.7 GHz) at a thin thickness of only 1.7 mm. The excellent microwave absorbing performances are attributed to the abundant heterointerfaces, well-controlled cavity, synergistic effects between magnetic and dielectric loss, and optimal impedance matching. Owing to the characteristics of strong absorbing capacity, ultrabroad absorption bandwidth and thin matching thickness, the yolk-shell structured Co@SiO2@Void@C nanocomposites are promising candidates as highly effective microwave absorbers.

chemistry, physical
Facile Synthesis of Novel Heterostructure Based on SnO2 Nanorods Grown on Submicron Ni Walnut with Tunable Electromagnetic Wave Absorption Capabilities

Biao Zhao,Bingbing Fan,Gang Shao,Wanyu Zhao,Rui Zhang

DOI: https://doi.org/10.1021/acsami.5b05482

2015-08-26

Abstract:In this work, the magnetic-dielectric core-shell heterostructure composites with the core of Ni submicron spheres and the shell of SnO2 nanorods were prepared by a facile two-step route. The crystal structure and morphology were investigated by X-ray diffraction analysis, transmission electron microscopy (TEM), and field emission scanning electron microscopy (FESEM). FESEM and TEM measurements present that SnO2 nanorods were perpendicularly grown on the surfaces of Ni spheres and the density of the SnO2 nanorods could be tuned by simply varying the addition amount of Sn(2+) in this process. The morphology of Ni/SnO2 composites were also determined by the concentration of hydrochloric acid and a plausible formation mechanism of SnO2 nanorods-coated Ni spheres was proposed based on hydrochloric acid concentration dependent experiments. Ni/SnO2 composites exhibit better thermal stability than pristine Ni spheres based on thermalgravimetric analysis (TGA). The measurement on the electromagnetic (EM) parameters indicates that SnO2 nanorods can improve the impedance matching condition, which is beneficial for the improvement of electromagnetic wave absorption. When the coverage density of SnO2 nanorod is in an optimum state (diameter of 10 nm and length of about 40-50 nm), the optimal reflection loss (RL) of electromagnetic wave is -45.0 dB at 13.9 GHz and the effective bandwidth (RL below -10 dB) could reach to 3.8 GHz (12.3-16.1 GHz) with the absorber thickness of only 1.8 mm. By changing the loading density of SnO2 nanorods, the best microwave absorption state could be tuned at 1-18 GHz band. These results pave an efficient way for designing new types of high-performance electromagnetic wave absorbing materials.
Investigation of the pore-size dependent microwave absorption properties of honeycomb SnO2

Ruoming Wang,Pengwei Bai,Biao Zhao,Zhongyi Bai,Xiaoqin Guo,Rui Zhang

DOI: https://doi.org/10.1007/s10854-020-04429-w

2020-09-15

Abstract:In this work, the honeycomb-like SnO2 with excellent microwave absorbing (MA) capability was successfully prepared by a template method. Furthermore, honeycomb-like SnO2 configuration with various pore sizes can be prepared by altering the size of polystyrene (PS) nano-sphere. The microstructure, crystallographic structure, elemental chemical state and MA properties of honeycomb-like SnO2 were measured by Scanning electron microscopy (SEM), X-ray diffraction (XRD), Thermogravimetric-difffferential scanning calorimetry (TG-DSC) and Vector network analyzer (VNA), respectively. Interestingly, the microwave absorption properties were determined by their honeycomb configurations. Furthermore, honeycomb SnO2 prepared using 148 nm PS spheres as template, presented a minimal RL of −47.4 dB at 11.1 GHz with the layer thickness of 3.2 mm. Meanwhile, the value of RL less than -10 dB was found in the range of 9.8–15.2 GHz. The combination of interfacial polarization, dielectric loss and cellular structure can inhibit the propagation of electromagnetic waves and dissipate microwave energy through heat or other forms. It is believed that the honeycomb-like structures could be expected to be candidates for a new generation of absorbing materials.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied

Two new Keratella, rotatoria, from Australia

Polyvinylpyrrolidone-assisted building of slice-like bread SnO2 for microwave absorption and radar cloaking

3D Flower-Like Co-based Oxide Composites with Excellent Wideband Electromagnetic Microwave Absorption

Enhanced Polarization from Hollow Cube-like ZnSnO3 Wrapped by Multiwalled Carbon Nanotubes: As a Lightweight and High-Performance Microwave Absorber.

In situ growing fusiform SnO 2 nanocrystals film on carbon fiber cloth as an efficient and flexible microwave absorber

Construction of Hierarchical Yolk-Shell Co/N-Dope C@void@C@MoS2 Composites with Multiple Heterogeneous Interfaces toward Broadband Electromagnetic Wave Absorption

Heterostructured CoFe@N-doped carbon porous polyhedron for efficient microwave absorption

Experiences of Children With Gay Fathers

Boosted interfacial charge dynamics on the SnO2/SnS2 heterointerface by gradient sulfur diffusion for microwave absorption and electric–thermal conversion

Fire-retardant and thermal insulating honeycomb-like NiS2/SnS2 nanosheets @ 3D porous carbon hybrids for high-efficiency electromagnetic wave absorption

Synthesis of Fe3O4@SiO2@C/Ni microspheres for enhanced electromagnetic wave absorption

Enhanced Electromagnetic Wave Absorption of SiOC/Porous Carbon Composites

Construction of three-dimensional mesh porous Mo 2 C/carbon composites by chitosan salting-out for efficient microwave absorption

Construction of heterostructured SnS2/SnS@graphene oxide composite with highly effective microwave absorption

Facile Synthesis of Sn/Reduced Graphene Oxide Composites With Tunable Dielectric Performance Toward Enhanced Microwave Absorption

Construction of Co2NiO4@MnCo2O4.5 nanoparticles with multiple hetero-interfaces for enhanced electromagnetic wave absorption

A facile fabrication and high-performance electromagnetic microwave absorption of ZnO nanoparticles

Construction of the N, S co-doped C/FeS 2 materials for low thickness and high-efficiency microwave absorption

Yolk-shell structured Co@SiO2@Void@C nanocomposite with tunable cavity prepared by etching of SiO2 as high-efficiency microwave absorber

Facile Synthesis of Novel Heterostructure Based on SnO2 Nanorods Grown on Submicron Ni Walnut with Tunable Electromagnetic Wave Absorption Capabilities

Investigation of the pore-size dependent microwave absorption properties of honeycomb SnO2