Abstract:Reactor performance of confined jet mixers for continuous hydrothermal flow synthesis of nanomaterials is investigated for the purpose of scale-up from laboratory scale to pilot-plant scale. Computational fluid dynamics (CFD) models were applied to simulate hydrothermal fluid flow, mixing and heat transfer behaviours in the reactors at different volumetric scale-up ratios (up to 26 times). The distributions of flow and heat transfer variables were obtained using ANSYS Fluent with the tracer concentration profiles being simulated via solving the species equations. The predicted temperature distributions under various volumetric scale-up ratios were compared with the available experimental data, and good agreements reached. The mixing between supercritical water jet and precursor stream with different scale-up ratios was examined in detail to identify the effect of scale-up ratios on hydrodynamic and thermodynamic features. The findings indicate that slightly weaker mixing was observed at the pilot plant scales, but the momentum dominated turbulent flow in the reactors and the same order of magnitude of mixing levels at both laboratory and pilot plant size scales could lead to similar quality nanoparticles to be manufactured under the investigated volumetric scale-up ratios and operating conditions, which is supported by experimental observation from literature. (C) 2015 Elsevier B.V. All rights reserved.

Numerical Analysis of Mixing Performance in Y-Junction Mixers and Its Impact on Yields from Supercritical Water Hydrolysis

Numerical study on particle behavior in a Y-junction mixer for supercritical water hydrolysis

Numerical Investigation on Hydrodynamics and Heat Transfer of Highly Viscous Fluid in Sulzer Mixer Reactor

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

Numerical Simulation of Hydrodynamics and Mixing Characteristics of High-Viscosity Non-Newtonian Fluid in Twin-Shaft Kneaders

Numerical Simulation of the Scalar Mixing Characteristics in Three-dimensional Microchannels

Impact of Mixing for the Production of Cuo Nanoparticles in Supercritical Hydrothermal Synthesis

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

Simulation for Scale-Up of a Confined Jet Mixer for Continuous Hydrothermal Flow Synthesis of Nanomaterials

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Numerical Simulation of Mixing in Complex Reaction System via Computational Fluid Dynamics

A Large-Eddy Simulation Study of the Transcritical Mixing Process in Coaxial Jet Flow under Supercritical Condition

Numerical analysis of a microfluidic mixer and the effects of different cross-sections and various input angles on its mixing performance

Numerical Investigation of Flow Patterns and Mixing Characteristics in a 3D Micromixer with Helical Elements over Wide Reynolds Numbers (adv. Theory Simul. 5/2023)

NUMERICAL EVALUATION OF TWO-FLUID MIXING IN A SWIRL MICRO-MIXER

The Initial Study on Supercritical Water Flow and Heat Transfer in Square Rod Bundle Channel with Mixing Vane

Numerical simulation for supercritical hydrothermal combustion reactor using methanol as auxiliary fuels

Computational Fluid Dynamics Simulation and Experimental Study on Mixing Performance of a Three-Dimensional Circular Cyclone-Type Microreactor

Numerical Investigation of Flow Patterns and Mixing Characteristics in a 3D Micromixer with Helical Elements over Wide Reynolds Numbers

Numerical Investigation of Near-Critical Fluid Convective Flow Mixing in Microchannels

Mixing Due to Natural Convection in a Hydrothermal Reactor: A CFD Study