Abstract:In current-generation designs of total primary hip joint replacement, the prostheses are fabricated from alloys. The modulus of elasticity of the alloy is substantially higher than that of the surrounding bone. This discrepancy plays a role in a phenomenon known as stress shielding, in which the bone bears a reduced proportion of the applied load. Stress shielding has been implicated in aseptic loosening of the implant which, in turn, results in reduction in the in vivo life of the implant. Rigid implants shield surrounding bone from mechanical loading, and the reduction in skeletal stress necessary to maintain bone mass and density results in accelerated bone loss, the forerunner to implant loosening. Femoral stems of various geometries and surface modifications, materials and material distributions, and porous structures have been investigated to achieve mechanical properties of stems closer to those of bone to mitigate stress shielding. For improved load transfer from implant to femur, the proposed study investigated a strategic debulking effort to impart controlled flexibility while retaining sufficient strength and endurance properties. Using an iterative design process, debulked configurations based on an internal skeletal truss framework were evaluated using finite element analysis. The implant models analyzed were solid; hollow, with a proximal hollowed stem; FB-2A, with thin, curved trusses extending from the central spine; and FB-3B and FB-3C, with thick, flat trusses extending from the central spine in a balanced-truss and a hemi-truss configuration, respectively. As outlined in the International Organization for Standardization (ISO) 7206 standards, implants were offset in natural femur for evaluation of load distribution or potted in testing cylinders for fatigue testing. The commonality across all debulked designs was the minimization of proximal stress shielding compared to conventional solid implants. Stem topography can influence performance, and the truss implants with or without the calcar collar were evaluated. Load sharing was equally effective irrespective of the collar; however, the collar was critical to reducing the stresses in the implant. Whether bonded directly to bone or cemented in the femur, the truss stem was effective at limiting stress shielding. However, a localized increase in maximum principal stress at the proximal lateral junction could adversely affect cement integrity. The controlled accommodation of deformation of the implant wall contributes to the load sharing capability of the truss implant, and for a superior biomechanical performance, the collared stem should be implanted in interference fit. Considering the results of all implant designs, the truss implant model FB-3C was the best model.

Bimodular femoral stems in primary total hip arthroplasty

Dual Modular Titanium Alloy Femoral Stem Failure Mechanisms and Suggested Clinical Approaches

15-year survivorship of a unique dual-modular femoral stem in primary hip arthroplasty

Femoral stem modularity

Titanium modular stems in total hip arthroplasty due to developmental dysplasia: a registry comparison with single-taper implants

Femoral Bone Remodeling in Revision Total Hip Arthroplasty with Use of Modular Compared with Monoblock Tapered Fluted Titanium Stems: the Role of Stem Length and Stiffness.

Mid-term results of titanium–titanium modular neck femoral stem in primary total hip arthroplasty

Efficacy and Safety of Modular Versus Monoblock Stems in Revision Total Hip Arthroplasty: a Systematic Review and Meta-Analysis

What Is the Difference Between Modular and Nonmodular Tapered Fluted Titanium Stems in Revision Total Hip Arthroplasty.

Total Hip Arthroplasty with a Non-Modular Conical Stem and Transverse Subtrochanteric Osteotomy in Treatment of High Dislocated Hips.

Clinical outcomes and survival rates of a uncemented modular revision stem system in hip arthroplasty: a 10-year single-institution study on a frail population

Mid-term results of total hip arthroplasty using a novel uncemented short femoral stem with metaphyso-diaphyseal fixation

Perspectives on metaphyseal conservative stems

Comparative analysis of the biomechanical behavior of two different design metaphyseal-fitting short stems using digital image correlation

Comparison of two tapered fluted modular titanium (TFMT) stems used in revision hip arthroplasty from a single center

Analysis of modular taper fractures of the revision hip stem Prevision and comparison of the original and current taper design

Debulking of the Femoral Stem in a Primary Total Hip Joint Replacement: A Novel Method to Reduce Stress Shielding

Aseptic Revision Total Hip Arthroplasty Using Modular Fluted Tapered Stems

Cemented Stem Design in Total Hip Arthroplasty: Fixation Philosophies, Biomechanics, and an Updated Classification System

Dual Mobility Articulation in Total Hip Arthroplasty: Mixed Femoral and Acetabular Components are a Feasible Option

On the design evolution of hip implants: A review