Experimental Investigation of Aerodynamic Forces and Flow Structures of Bionic Cylinders Based on Harbor Seal Vibrissa
Wen-Li Chen,Xiang-Wei Min,Dong-Lai Gao,An-Xin Guo,Hui Li
DOI: https://doi.org/10.1016/j.expthermflusci.2018.07.033
IF: 3.2
2018-01-01
Experimental Thermal and Fluid Science
Abstract:In the present study, we investigated a new type of non-uniform surface cylinder based on a harbor seal vibrissa to reduce aerodynamic forces and suppress vortex shedding. Three vibrissa-based bionic cylinder models (i.e., models #1, #2, and #3) with different undulation wavelengths were manufactured and tested in a wind tunnel. The wind tunnel experiments were conducted at a Reynolds number of R-e approximate to 50,000 based on the hydrodynamic diameter (D-h) and incoming airflow speed. The control effects on the aerodynamic forces and flow structures around the bionic cylinders were studied and compared with those of a baseline circular cylinder. In addition to measuring the surface pressure distributions using an array of digital pressure transducers, a high frequency force balance was used to determine the aerodynamic forces acting on the test models. Moreover, a digital particle image velocimetry (PIV) system was utilized to quantify the stream-wise flow structure and span-wise flow field to assess the effectiveness of the bionic cylinder models. The results revealed that a bionic non-uniform surface distribution could reduce the mean drag and suppress the fluctuating lift to a certain extent. Bionic cylinder model #2, which had a wavelength of two minor axes, worked best among the three models, and it was found to achieve a drag reduction of 15% and a maximum fluctuating lift suppression of 58% when the angle of the incoming airflow was 0 degrees. The PIV results indicated that the non-uniform surface structure would disrupt the consistency of span-wise flow and decrease the span-wise correlation in the near wake of the test models, which could decrease the turbulent kinetic energy, mean drag, and fluctuating lift of the test models.