The effect of amphetamine on forced drinking in the rat.

P. Teitelbaum,P. Derks

DOI: https://doi.org/10.1037/H0038460

1958-12-01

Journal of Comparative and Physiological Psychology

Abstract:

What problem does this paper attempt to address?

Modulation of Electronic Structure of Single-Atom Catalysts for Sustainable Production of Full-Spectrum Amines from Renewable Biomass

Wu‐Jun Liu,Xiao Yan Zhou,Min Yuan,Jiawei Huang,Jie‐Jie Chen,Yuen Wu,Han‐Qing Yu

DOI: https://doi.org/10.21203/rs.3.rs-2458189/v1

2023-01-01

Abstract:Abstract Using renewable biomass to replace fossil resources for producing low-carbon-footprint but high-value chemicals is a sustainable approach to pursue a carbon-neutral society. Herein, a boron nitrogen doped carbon (BNC) confined Pd single atom catalyst (Pd SAs/BNC) is synthesized and used as a robust catalyst toward the reductive amination reaction to produce low-carbon-footprint amines from renewable biomass. Because of the finely tuned electron structure, the as-synthesized single atom catalyst delivers an ultrahigh turn-over frequency value (max. 1368 h − 1 ) in the reductive amination of aldehydes/ketones and demonstrates a great conversion capacity for various aldehyde/ketone and amine/nitro-compound substrates. Extensive characterizations and density functional theory calculations show that the highly polar metal-N site formed between the central Pd single atom and its neighboring N and B atoms favors hydrogen activation from the donor (reductants) and hydrogen transformation to the receptor (C = O group), resulting in a great selectivity. This system could be further extended to directly produce various aromatic and furonic amines from renewable lignocellulosic biomass, and their greenhouse gas emission potentials are negative compared to those of fossil-fuel resource-based amines. This work offers a highly efficient and sustainable approach to construct C-N bonds for the production of numerous amines from carbon-neutral biomass resources.
Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Ling Xu,Renfeng Nie,Xilei Lyu,Juncheng Wang,Xiuyang Lu

DOI: https://doi.org/10.1016/j.fuproc.2019.106205

IF: 8.129

2019-01-01

Fuel Processing Technology

Abstract:Non-noble metal catalyzed transfer hydrogenation of biomass using biomass-derived formic acid (FA) as hydrogen source is one of promising strategies for relieving fossil energy crisis. Since acidic FA would destroy and deactivate naked active sites, developing heterogeneous catalysts with stabilized structure and activity that are qualified in harsh conditions is highly desirable but challenging. Herein, mesoporous N-doped carbon encapsulated Co catalysts (Co-N-C) are synthesized through a facile carbonization of Co(phen)(2)(OAc)(2) with nano-MgO as porogen agent. After acid treatment, the optimized Co-N-C-700 (pyrolyzed at 700 degrees C) could afford full furfural (FAL) conversion as well as > 99% furfuryl alcohol (FOL) selectivity with only 3.5 equiv. FA at 150 degrees C for 6 h, exhibiting much superior performance than commercial Pd-, Pt- and Ru-based catalysts. Using molecular H-2 as hydrogen source not only affords low conversion but also leads to over-hydrogenation of FOL and generation of furfuryl formate (FF). This catalyst is very stable in acidic FA and could be recycled 5 times without deactivation or leaching. Co-N-C-700 is also capable for gram-scale transfer hydrogenation of FAL and is versatile for other aldehydes with > 90% yield of desired products. This work could promote the application of encapsulated Co-based catalysts for selective transformation of biomass in chemical industry.
Catalytic amino acid production from biomass-derived intermediates

Weiping Deng,Yunzhu Wang,Sui Zhang,Krishna M Gupta,Max J Hülsey,Hiroyuki Asakura,Lingmei Liu,Yu Han,Eric M Karp,Gregg T Beckham,Paul J Dyson,Jianwen Jiang,Tsunehiro Tanaka,Ye Wang,Ning Yan

DOI: https://doi.org/10.1073/pnas.1800272115

2018-05-15

Abstract:Amino acids are the building blocks for protein biosynthesis and find use in myriad industrial applications including in food for humans, in animal feed, and as precursors for bio-based plastics, among others. However, the development of efficient chemical methods to convert abundant and renewable feedstocks into amino acids has been largely unsuccessful to date. To that end, here we report a heterogeneous catalyst that directly transforms lignocellulosic biomass-derived α-hydroxyl acids into α-amino acids, including alanine, leucine, valine, aspartic acid, and phenylalanine in high yields. The reaction follows a dehydrogenation-reductive amination pathway, with dehydrogenation as the rate-determining step. Ruthenium nanoparticles supported on carbon nanotubes (Ru/CNT) exhibit exceptional efficiency compared with catalysts based on other metals, due to the unique, reversible enhancement effect of NH3 on Ru in dehydrogenation. Based on the catalytic system, a two-step chemical process was designed to convert glucose into alanine in 43% yield, comparable with the well-established microbial cultivation process, and therefore, the present strategy enables a route for the production of amino acids from renewable feedstocks. Moreover, a conceptual process design employing membrane distillation to facilitate product purification is proposed and validated. Overall, this study offers a rapid and potentially more efficient chemical method to produce amino acids from woody biomass components.
Electronic and structural engineering of supported single atomic layer, low-nuclearity palladium catalysts for conversion of levulinic acid to 1,4-pentanediol

Xiaowen Lu,Tingting Luo,Mingyang Zhang,J Hugh Horton,Qiong Wu,Wei Wu,Man Qiao,Yu Wang,Zhijun Li

DOI: https://doi.org/10.1016/j.cej.2023.142647

IF: 15.1

2023-03-29

Chemical Engineering Journal

Abstract:The size and geometry of supported metal ensembles have a substantial influence on their catalytic efficacy and are pivotal in the design of effective heterogeneous catalysts. Here we developed a straightforward electronic and structural engineering strategy to create supported single atomic-layered, low-nuclearity palladium catalysts. This atomically dispersed Pd catalyst possesses unique synergistic geometric and electronic effects and nearly full metal availability to the reactant, exhibiting excellent catalytic activity (turnover frequency of 12480 h −1 ) and yield (> 99%) in the hydrogenation of levulinic acid to 1,4-pentanediol under mild conditions, a reaction of importance for conversion of biomass to renewable chemicals. Theoretical calculations reveal that the high catalytic activity results from the cooperation of adjacent Pd atoms, high d-band center, and strong electronic metal-support interactions, thus guaranteeing efficient activation of reactant and facilitating the subsequent ring-opening step. The present work sheds light on the elegant design of low-nuclearity metal cluster catalysts with structure sensitivity to maximize the catalytic efficiency at the atomic scale.

engineering, chemical, environmental
CoNi Alloy Nanoparticles Confined in N-Doped Porous Carbon as an Efficient and Versatile Catalyst for Reductive Amination of Levulinic Acid/Esters to N -Substituted Pyrrolidones

Yun Wang,Mengting Chen,Kaiyue Zhang,Haimei Wu,Jiale Wang,Yuran Cheng,Yingxin Liu,Zuojun Wei

DOI: https://doi.org/10.1021/acscatal.3c03854

IF: 12.9

2023-09-13

ACS Catalysis

Abstract:Highly efficient transformation of renewable biomass and its derivatives into high-value-added chemicals and biofuels over non-noble-metal catalysts is attractive but challenging. Herein, we developed non-noble CoNi alloy nanoparticles confined in N-doped porous carbon (CoNi@NC) via simple pyrolysis of the metal–organic framework (MOF) precursor at 900 °C under an inert atmosphere. The as-obtained CoNi@NC catalyst exhibited higher performance than monometallic Co@NC and Ni@NC catalysts in the reductive amination of levulinic acid (LA) with benzylamine to N-benzyl-5-methyl-2-pyrrolidinone (BMP) under mild conditions of 130 °C and 3 MPa H2 for 6 h, achieving a full conversion of LA and a ≥ 99% yield of BMP. Detailed characterizations substantiated that multifunctional support and the significant synergistic effect between Co and Ni markedly enhanced the catalytic performance. Furthermore, CoNi@NC manifested outstanding recyclability (reusable 20 cycles without loss of activity), which was attributed to the well-dispersed CoNi alloy nanoparticles confined in the N-doped porous carbon and the anchoring of N species to metal nanoparticles. Additionally, the resultant CoNi@NC catalyst can be successfully applied in the one-pot transformation of LA/esters with amines/nitroarenes/nitriles to the corresponding N-substituted pyrrolidones, as well as the reductive amination of other carbonyl compounds with benzylamine to form N-heterocyclic compounds. Moreover, CoNi@NC enabled us to catalyze the continuous reductive amination of LA with amines in a trickle-bed reactor, which is a more promising, efficient, highly atomically economic, and green synthetic methodology, and exhibited excellent stability during the reaction over 36 h.

chemistry, physical
Facile synthesis of hydrochar-supported catalysts from glucose and its catalytic activity towards the production of functional amines

Xiuzheng Zhuang,Jianguo Liu,Longlong Ma

DOI: https://doi.org/10.1016/j.gee.2022.01.012

IF: 12.781

2023-01-01

Green Energy & Environment

Abstract:Since the utilization of abundant biomass to develop advanced materials has become an utmost priority in recent years, we developed two sustainable routes (i.e., the impregnation method and the one-pot synthesis) to prepare the hydrochar-supported catalysts and tested its catalytic performance on the reductive amination. Several techniques, such as TEM, XRD and XPS, were adopted to characterize the structural and catalytic features of samples. Results indicated that the impregnation method favors the formation of outer-sphere surface complexes with porous structure as well as well-distributed metallic nanoparticles, while the one-pot synthesis tends to form the inner-sphere surface complexes with relatively smooth appearance and amorphous metals. This difference explains the better activity of catalysts prepared by the impregnation method which can selectively convert benzaldehyde to benzylamine with an excellent yield of 93.7% under the optimal reaction conditions; in contrast, the catalyst prepared by the one-pot synthesis only exhibits a low selectivity near to zero. Furthermore, the gram-scale test catalyzed by the same catalysts exhibits a similar yield of benzylamine in comparison to its smaller scale, which is comparable to the previously reported heterogeneous noble-based catalysts. More surprisingly, the prepared catalysts can be expediently recycled by a magnetic bar and remain the satisfying catalytic activity after reusing up to five times. In conclusion, these developed catalysts enable the synthesis of functional amines with excellent selectivity and carbon balance, proving cost-effective and sustainable access to the wide application of reductive amination. & COPY; 2022 Institute of Process Engineering, Chinese Academy of Sciences. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co., Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Toward Biomass-Based Single-Atom Catalysts and Plastics: Highly Active Single-Atom Co on N-doped Carbon for Oxidative Esterification of Primary Alcohols

Hua Zhou,Song Hong,Hao Zhang,Yongting Chen,Huanghui Xu,Xueke Wang,Zheng Jiang,Shengli Chen,Yun Liu

DOI: https://doi.org/10.1016/j.apcatb.2019.117767

2019-01-01

Abstract:Supported single-atom catalysts (SACs) have attracted much attention as their advantageous performances in heterogenous catalysis. Here, we report a general synthesis approach to produce SACs on nitrogen-doped carbon (M SAs-N@C, where M = Fe, Co, Ni, Cu) by engineering bioinspired metal-lignin coordination complexes. The Co SAs-N@C catalyst shows extraordinary reactivity for the oxidative esterification of primary alcohols via aldehyde intermediates, achieving a high turnover frequency (TOF, 55.6 mol (methyl benzoate) mol(Co)(-1)h(-1)) for benzyle alcohol, which is approx. 18 times of Co nanoparticles. Experiments and theoretical calculations reveal that the atomically dispersed Co species in Co SAs-N@C are active sites for this reaction. As a proof-of-concept, we demonstrate an integrated biorefinery that lignin-based catalyst enables the effective transformation of carbohydrate-derived furans into building block of plastics and fragrance. Our technique not only provides a facile, low-cost and scalable method to atomically dispersed catalysts but also opens new avenue toward lignin valorization and biomass economy.
Size-Tunable Carbon-Doped Ni Nanoparticles for Switchable Reductive Amination of Biomass-Derived Carbonyl Compounds to Primary Amines and Secondary Imines

Zhengyi Pan,Qian Zhang,Wenquan Wang,Lulin Wang,Guang-Hui Wang

DOI: https://doi.org/10.1021/acssuschemeng.2c00800

2022-03-11

Abstract:Reductive aminations of biomass-derived carbonyl compounds, an industrially important class of reactions applied for green and sustainable production of valuable amines/imines, often suffer from problems of selectivity toward the target product and reusability of the catalyst. Herein, we develop a facile strategy to synthesize two carbon-doped Ni catalysts with particle sizes of 7.5 and 47.5 nm, respectively, over which the selectivity in the reductive amination of biomass-derived carbonyl compounds is completely switched between primary amines (>96% yield, 7.5 nm) and secondary imines (>97% yield, 47.5 nm). The synthesis is derived from the confined pyrolysis of Ni-Al layered double hydroxides (NiAl-LDH) grafted on hollow polymer nanospheres (HPS), in which the HPS play four roles (i.e., template, reductant, carbon resource, and Ni size controller). The two catalysts exhibit excellent stability due to the existence of surface Ni-Cx species. Reductive aminations over these two catalysts have a broad substrate scope and can be scaled up to the gram level, indicating the potential for industrial applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.2c00800.Supporting methods, supporting scheme, and supporting figures and tables (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Biomass Sucrose-Derived Cobalt@Nitrogen-Doped Carbon for Catalytic Transfer Hydrogenation of Nitroarenes with Formic Acid

Man Yuan,Yu Long,Jin Yang,Xiwei Hu,Dan Xu,Yangyang Zhu,Zhengping Dong

DOI: https://doi.org/10.1002/cssc.201802163

IF: 8.4

2018-12-11

ChemSusChem

Abstract:Fabrication of non-noble metal-based heterogeneous catalysts by a facile and cost-effective strategy for ecofriendly catalytic transfer hydrogenation (CTH) is of great significance for organic transformations. A cobalt@nitrogen-doped carbon (Co@NC) catalyst was prepared from renewable biomass-derived sucrose, harmless melamine, and earth-abundant Co(AcO)2 as the precursor materials by hydrothermal treatment and carbonization. Co nanoparticles (NPs) were coated with NC shells and uniformly embedded in the NC framework. The as-obtained Co@NC-600 (carbonized at 600 °C) catalyst exhibited excellent catalytic efficiency for CTH of various functionalized nitroarenes with formic acid (FA) as hydrogen donor in aqueous solution. The uniformly incorporated N atoms in the C matrix and the encapsulated Co NPs showed synergistic effects in the CTH reactions. A mechanistic analysis indicated that the protons from FA were activated by Co sites after being captured by N atoms, and then reacted with nitroarenes adsorbed on the surface of the catalysts to generate the corresponding aromatic amines. Moreover, the catalyst showed excellent durability and reusability without obvious decrease in activity even after five reaction cycles. Thus, the study reported herein provides a cost-effective, sustainable strategy for fabrication of biomass-derived non-noble metal-based catalysts for green and efficient catalytic transformations.
Engineering of local electron properties optimization in single-atom catalysts enabling sustainable photocatalytic conversion of N2 into NH3

Tianren Liu,Wensheng Zhang,Qingmei Tan,Weilong Lian,Haiting Lin,Jianshen Li,Dongxue Han,Yingying Fan,Dongdong Qin,Li Niu

DOI: https://doi.org/10.1016/j.cej.2024.150286

IF: 15.1

2024-03-01

Chemical Engineering Journal

Abstract:Photocatalytic synthesis of ammonia (NH3) from nitrogen (N2) offers a promising strategy for carbon neutrality, as it avoids the energy-intensive and carbon-emitting industrial processes. The exploration of high-efficiency N2 photofixation systems for photocatalytic N2 reduction reaction (pNRR) is critical but it remains a challenge since the lack of rational structural design and atomic-level insights into molecular N2 activation mechanism. Herein, an atomically dispersed single-atom palladium (Pd) active sites decorated oxygen-deficient molybdenum oxide (Pd/MoO3-x) was creatively designed for assessing pNRR performance. Interestingly, the integration of single-atom Pd active sites in MoO3-x can significantly weaken the N≡N bond of adsorbed N2 and effectively lower the activation energy barrier during the pNRR process. This is attributed to the fact that the modified Pd single-atom sites of Pd/MoO3-x play a dominant role in the N2 spontaneous adsorption process as well as possess a remarkable photogenerated electron trapping ability, which could be assisted to inject electrons into N2 antibonding orbital, thus significantly accelerates the reaction kinetics. Consequently, the Pd/MoO3-x photocatalyst reaches an impressive NH3 yield rate of 103.2 μggcat.−1h−1, which is superior to that of pristine MoO3-x (21.2 μggcat.−1h−1) and commercial MoO3 (6.5 μggcat.−1h−1), respectively. The present study not only creates a reliable approach to expand efficient N2 photofixation system under mild conditions through the fabrication of atomically dispersed monometallic active sites, but also offers atomic-level insights into the underlying mechanism of pNRR catalytic process.

engineering, chemical, environmental
Integrated "all-in-one" strategy to construct highly efficient Pd catalyst for CO 2 transformation†

Lingfang Kong,Zekun Tao,Yunjia Li,Huiwen Gong,Yun Bai,Longbin Li,Xianjin Zhang,Zhong-Gao Zhou,Yiwang Chen

DOI: https://doi.org/10.1039/d4sc03106g

IF: 8.4

2024-08-30

Chemical Science

Abstract:The synthesis of high-value chemicals featuring C–C and/or C–heteroatom bonds via CO 2 is critically important, yet efficiently converting thermodynamically stable and kinetically inert linear CO 2 and propargylic amine to the heterocyclic compound 2-oxazolidinone with an integrated catalytic system continues to pose a considerable challenge. Herein, we have designed an "all-in-one" (AIO) palladium (Pd) catalyst (Cat 1 ), distinguished by its co-coordination with acetylglucose (AcGlu) and bis(benzimidazolium) units at the Pd center, which promotes the cyclization of CO 2 and propargylic amine achieving a highest turnover frequency (TOF) of up to 3456 h -1 . Moreover, Cat 1 demonstrates excellent stability across various temperatures, with its catalytic activity remaining unchanged even after 10 cycles. The catalyst Cat 1 simultaneously activates propargylic amine and CO 2 , facilitating the formation of N-heterocyclic carbene (NHC)-CO 2 adducts and AcGlu-CO 2 philes from CO 2 in simulated flue gas, a key factor in reaching unprecedented TOF values. The catalytic mechanism was elucidated through quasi-in-situ NMR and 13 C-isotope labeling experiments. Notably, this is the first instance of an AIO Pd catalyst that enables the simultaneous capture, activation, and catalytic conversion of in-situ activated CO 2 along with propargylic amine. The design strategy of this AIO catalyst introduces a novel approach to overcoming the challenges in the efficient conversion of inert CO 2 .

chemistry, multidisciplinary
CO2‐assisted Controllable Synthesis of PdNi Nanoalloys for Highly Selective Hydrogenation of Biomass‐derived 5‐Hydroxymethylfurfural

Ruichao Guo,Yongjian Zeng,Lu Lin,Di Hu,Chunqiang Lu,Stuart Conroy,Suyu Zhang,Chen Zeng,Huixia Luo,Zhiwei Jiang,Xiaolei Zhang,Xin Tu,Kai Yan

DOI: https://doi.org/10.1002/anie.202418234

2024-10-22

Angewandte Chemie International Edition

Abstract:The selective hydrogenation of 5-hydroxymethylfurfural (HMF) to 2,5-bishydroxymethyltetrahydrofuran (BHMTHF), a vital fuel precursor and solvent, is crucial for biomass refining. Herein, we report highly selective and stable PdNi nanoalloy catalysts for this deep hydrogenation process. A CO2-assisted green method was developed for the controllable synthesis of various bimetallic and monometallic catalysts. The PdNi/SBA-15 catalysts with various Pd/Ni ratios exhibited a volcano-like trend between BHMTHF yield and Pd/Ni ratio. Among all catalysts tested, Pd2Ni1/SBA-15 achieved the best performance, converting 99.0% of HMF to BHMTHF with 96.0% selectivity, surpassing previously reported catalysts. Additionally, the Pd2Ni1/SBA-15 catalyst maintained excellent stability even after five recycling runs. Catalyst characterizations (e.g., HAADF-STEM) and DFT calculations confirmed the successful formation of the alloy structure with electron transfer between Ni and Pd, which accounts for the remarkable performance and stability of the catalyst. This work paves the way for developing highly selective and stable alloy catalysts for biomass valorization.

chemistry, multidisciplinary
Pickering HIPEs derived hierarchical porous nitrogen-doped carbon supported bimetallic AuPd catalyst for base-free aerobic oxidation of HMF to FDCA in water

Wen Guan,Yunlei Zhang,Yanan Wei,Bing Li,Yonghai Feng,Changhao Yan,Pengwei Huo,Yongsheng Yan

DOI: https://doi.org/10.1016/j.fuel.2020.118362

IF: 7.4

2020-10-01

Fuel

Abstract:As an important renewable alternative to the production of petroleum-derived terephthalic acid, selective aerobic oxidation of biomass derivative 5-hydroxymethylfurfural (HMF) into high value-added 2,5-furandicarboxylic acid (FDCA) is attracting increasing attention. Herein, a novel hierarchical porous nitrogen-doped carbon (NC) supported bimetallic AuPd catalyst was synthesized by Pickering high internal phase emulsions (Pickering HIPEs) templating method, subsequent carbonization and the sol-curing technique. By varying Pickering HIPEs parameter, nitrogen-doped content and the loaded AuPd nanoparticles, AuxPdy/NC catalysts with adjustable porous structure and basicity were obtained. Benefiting from the synergistic effects of the high basicity of NC support and efficient bimetallic AuPd catalyst, tandem oxidation of HMF to FDCA reactions can be carried out under base-free condition in water, which makes the biomass transformation process environmental friendliness and economic. And the highest yield of FDCA at 96.7% was achieved under the optimal reaction conditions. Regeneration test revealed the obtained AuxPdy/NC catalyst was recovered and reused at least five times without significant loss of catalytic activity. The present work offers a versatile strategy for developing nitrogen-doped carbon supported highly efficient bimetallic catalysts with hierarchical porous structure and adjusting basicity for a wide range of base-free catalytic oxidation in water.

energy & fuels,engineering, chemical
Amorphous Bismuth-Tin Oxide Nanosheets with Optimized C-N Coupling for Efficient Urea Synthesis

Xiangyu Chen,Shuning Lv,Hongfei Gu,Hanke Cui,Gui Liu,Yifei Liu,Zhaoyu Li,Ziyan Xu,Jianxin Kang,Gilberto Teobaldi,Li-Min Liu,Lin Guo

DOI: https://doi.org/10.1021/jacs.4c03156

IF: 15

2024-05-02

Journal of the American Chemical Society

Abstract:Closing the carbon and nitrogen cycles by electrochemical methods using renewable energy to convert abundant or harmful feedstocks into high-value C- or N-containing chemicals has the potential to transform the global energy landscape. However, efficient conversion avenues have to date been mostly realized for the independent reduction of CO(2) or NO(3)^(-). The synthesis of more complex C-N compounds still suffers from low conversion efficiency due to the inability to find effective catalysts....

chemistry, multidisciplinary
Controlled Synthesis of Sustainable N-doped Hollow Core-Mesoporous Shell Carbonaceous Nanospheres from Biomass

Chuanlong Han,Shiping Wang,Jing Wang,Mingming Li,Jiang Deng,Haoran Li,Yong Wang

DOI: https://doi.org/10.1007/s12274-014-0540-x

IF: 9.9

2014-01-01

Nano Research

Abstract:Encompassing ecological and economic concerns, the utilization of biomass to produce carbonaceous materials has attracted intensive research and industrial interest. Using nitrogen containing precursors could realize an in situ and homogeneous incorporation of nitrogen into the carbonaceous materials with a controlled process. Herein, N-doped hollow core-disordered mesoporous shell carbonaceous nanospheres (HCDMSs) were synthesized from glucosamine hydrochloride (GAH), an applicable carbohydrate-based derivative. The obtained HCDMSs possessed controlled size (∼450-50 nm) and shell thickness (∼70-10 nm), suitable nitrogen contents (∼6.7-4.4 wt.%), and Brunauer-Emmett-Teller (BET) surface areas up to 770 m2·g−1. These materials show excellent electrocatalytic activity as a metal-free catalyst for the oxygen reduction reaction (ORR) in both alkaline and acidic media. Specifically, the prepared HCDMS-1 exhibits a high diffusion-limited current, and superior durability and better immunity towards methanol crossover and CO poisoning for ORR in alkaline solution than a commercial 20 wt.% Pt/C catalyst.
Construction of Ag‐Co(OH)2 Tandem Heterogeneous Electrocatalyst Induced Aldehyde Oxidation and the Co‐Activation of Reactants for Biomass Effective and Multi‐Selective Upgrading

Peng Zhou,Xingshuai Lv,Huining Huang,Baixue Cheng,Haoyu Zhan,Yankun Lu,Thomas Frauenheim,Shuangyin Wang,Yuqin Zou

DOI: https://doi.org/10.1002/adma.202312402

IF: 29.4

2024-02-10

Advanced Materials

Abstract:The electrocatalytic oxidation of 5‐hydroxymethylfurfural (HMF) provides a feasible way for high value utilization of biomass resources. However, how to regulate the selective synthesis of multiple value‐added products is still a great challenge. Cobalt‐based compound is a promising catalyst due to its direct and indirect oxidation properties, but its weak adsorption capacity restricts its further development. Herein, by constructing Ag‐Co(OH)2 heterogeneous catalyst, we realize the efficient and selective synthesis of 5‐hydroxymethyl‐2‐furanoic acid (HMFCA) and 2, 5‐furan dicarboxylic acid (FDCA) value‐added products at different potential ranges. Based on in‐situ infrared spectroscopy, quasi‐operando X‐ray photoelectron spectroscopy, in‐situ electrochemical impedance spectroscopy, zeta potential, electrochemical measurements and density functional theory calculations, it is proved that the addition of Ag can effectively promote the oxidation of aldehyde group to carboxyl group, and then generate HMFCA at low potential. Moreover, the introduction of Ag can activate cobalt‐based compound, thus strengthening the adsorption of organic molecules and OH− species, and promoting the formation of FDCA. This work achieves the selective synthesis of two value‐added chemicals by one tandem catalyst and deeply analyzes the adsorption enhancement mechanism of the catalyst, which provides a powerful reference and guidance for the design and development of efficient multi‐component heterogeneous catalysts. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Layered double hydroxides-based metal nanocatalysts: Confinement engineering, microenvironment effect and applications in catalytic conversion of biomass

Jun Wu,Yuhang Xie,Yong Li,Ming Jin,Liqian Liu,Gang Pan,Chengbing Wang,Fuwei Li

DOI: https://doi.org/10.1016/j.ccr.2023.215437

IF: 24.833

2023-09-28

Coordination Chemistry Reviews

Abstract:Rational design and targeted synthesis of efficient supported metal nanocatalysts for catalytic transformation of renewable biomass into value-added chemicals and fuels has attracted increasing attentions in heterogeneous catalysis. Precisely tailoring the surface microenvironment of supported metal nanocatalysts including geometric coordination environment and electronic state of metal active sites, especially for highly dispersed single atoms (SAs), nanoclusters (NCs) and nanoparticles (NPs), plays significant roles in improving catalytic performance for biomass conversion. Owing to the atomic-level uniform distribution of constituent metal species, flexible chemical compositions, unique confinement effect and topological transformation property, layered double hydroxides (LDHs) as a family of 2D layered nanomaterials, are believed to be ideal structure platforms to acquire highly dispersed supported metal nanocatalysts with well-designed surface microenvironments. Herein, classic synthesis approaches of LDHs precursors and typical confinement synthesis strategies of highly dispersed LDHs-based metal nanocatalysts (e.g. SAs, NCs, NPs) with specific surface microenvironments are systematically discussed. Particular emphasis is placed on specific microenvironment effects of LDHs-based metal nanocatalysts and their advanced applications for reductive, oxidative and reforming upgrading of various biomass-derived molecules with aim to reveal structure–property relationship and catalytic reaction mechanism. Finally, challenges and perspectives are illustrated to provide further guidance for developing high-performance LDHs-based metal nanocatalysts for efficient and sustainable biomass transformation.

chemistry, inorganic & nuclear
Utilizing in situ construction of N-doped hierarchical porous carbon to achieve electronic control of highly dispersed Pd nanoparticles for efficient catalytic hydrogenation of CO 2 to formic acid

Yan Wang,Anjie Yang,Yuantong Liu,Mengqin Yao,Fei Liu,Jun Ma,Shuo Geng

DOI: https://doi.org/10.1016/j.jece.2024.113007

IF: 7.7

2024-05-19

Journal of Environmental Chemical Engineering

Abstract:Hydrogenation of CO 2 to produce formic acid/formate is a significant pathway for future energy storage and utilization. The development of heterogeneous catalysts with high activity and stability for this process is still a challenge. In this work, the in-situ N-doped hierarchical porous carbon derived from distiller's grains was used as a support for Pd-based catalysts (Pd/NC) to convert CO 2 into valuable chemicals while making high-value use of waste biomass. The optimum catalyst, Pd/NC-800, shown exceptional catalytic performance, achieving a turnover frequency (TOF) of 2060 h −1 at 100°C, 4 MPa in the catalytic CO 2 hydrogenation to formate reaction. Comprehensive experimental results and density functional theory calculations indicate that the electronic effect between the pyridine N in the support and the Pd nanoparticles (NPs) can make the Pd surface reach the state of electron enrichment and enhance the metal-support interaction. Moreover, the synthesized material has hierarchical pore structure, which provides abundant Pd anchor location sites and improves mass transfer efficiency. The results not only provide a feasible strategy for the preparation of efficient CO 2 hydrogenation catalysts, but also break a new and effective avenue for the resource utilization of distiller's grains.

engineering, chemical, environmental
Pd-Based Nano-Catalysts Promote Biomass Lignin Conversion into Value-Added Chemicals

Ming Zhao,Liang Zhao,Xiao-Yan Zhao,Jing-Pei Cao,Koh-ichi Maruyama

DOI: https://doi.org/10.3390/ma16145198

IF: 3.4

2023-07-25

Materials

Abstract:Lignin, as a structurally complex biomaterial, offers a valuable resource for the production of aromatic chemicals; however, its selective conversion into desired products remains a challenging task. In this study, we prepared three types of Pd-based nano-catalysts and explored their application in the depolymerization of alkali lignin, under both H2-free (hydrogen transfer) conditions and H2 atmosphere conditions. The materials were well characterized with TEM, XRD, and XPS and others, and the electronic interactions among Pd, Ni, and P were analyzed. The results of lignin depolymerization experiments revealed that the ternary Pd-Ni-P catalyst exhibited remarkable performance and guaiacols could be produced under H2 atmosphere conditions in 14.2 wt.% yield with a selectivity of 89%. In contrast, Pd-Ni and Pd-P catalysts resulted in a dispersed product distribution. Considering the incorporation of P and the Pd-Ni synergistic effect in the Pd-Ni-P catalyst, a possible water-involved transformation route of lignin depolymerization was proposed. This work indicates that metal phosphides could be promising catalysts for the conversion of lignin and lignin-derived feedstocks into value-added chemicals.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Highly Efficient and Stable Ni-based Catalyst for Selective Conversion of Biomass-Derived Aldehydes and Ketones to Primary Amines

Yanlin Xu,Jiahao Zhang,Peixia Wang,Yiwei Fan,Yifan Jiang,Xiaonan Duan,Yingying Li,Jisong Zhang

DOI: https://doi.org/10.1016/j.cej.2023.148175

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:Here We report a yolk-shell structured Zr-assisted Ni-based catalyst, which could catalyze the reductive amination of a variety of biomass-derived aldehydes and ketones with high activity and robust stability. The novel LDH-derived Zr assisted-NiAl catalyst exhibits superior stability (>200 h) than traditional supported Ni/Al2O3 catalyst (<75 h) due to strong interaction between Ni-0 yolk and NiAl2O4 shell. Outstanding yield of fufurylamine at 99 % is achieved under mild conditions at low temperature of 70 degrees C with 1 MPa H-2. Other aldehydes and ketones are also transformed into primary amines with high yield above 90 % generally under mild conditions. Our study reveals that strong acidity favors the activation of imines, while strengthened hydrogen activation capability of catalyst promotes the dissociation of intermediate secondary amine to primary amine. The appropriate hydrogen activation capability regulated by Zr introduction into LDH-derived NiAl catalyst avoids over-hydrogenation of furyl-, hydroxyl- and imide-groups, which accounts for the high selectivity of mono-primary amine. Importantly, the dependence of mono-primary amine production on appropriate hydrogen activation capability of catalyst proved by this work provides ideas for tailored catalysts in the production of renewable primary amines from biomass.

The effect of amphetamine on forced drinking in the rat.

Modulation of Electronic Structure of Single-Atom Catalysts for Sustainable Production of Full-Spectrum Amines from Renewable Biomass

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Catalytic amino acid production from biomass-derived intermediates

Electronic and structural engineering of supported single atomic layer, low-nuclearity palladium catalysts for conversion of levulinic acid to 1,4-pentanediol

CoNi Alloy Nanoparticles Confined in N-Doped Porous Carbon as an Efficient and Versatile Catalyst for Reductive Amination of Levulinic Acid/Esters to N -Substituted Pyrrolidones

Facile synthesis of hydrochar-supported catalysts from glucose and its catalytic activity towards the production of functional amines

Toward Biomass-Based Single-Atom Catalysts and Plastics: Highly Active Single-Atom Co on N-doped Carbon for Oxidative Esterification of Primary Alcohols

Size-Tunable Carbon-Doped Ni Nanoparticles for Switchable Reductive Amination of Biomass-Derived Carbonyl Compounds to Primary Amines and Secondary Imines

Biomass Sucrose-Derived Cobalt@Nitrogen-Doped Carbon for Catalytic Transfer Hydrogenation of Nitroarenes with Formic Acid

Engineering of local electron properties optimization in single-atom catalysts enabling sustainable photocatalytic conversion of N2 into NH3

Integrated "all-in-one" strategy to construct highly efficient Pd catalyst for CO 2 transformation†

CO2‐assisted Controllable Synthesis of PdNi Nanoalloys for Highly Selective Hydrogenation of Biomass‐derived 5‐Hydroxymethylfurfural

Pickering HIPEs derived hierarchical porous nitrogen-doped carbon supported bimetallic AuPd catalyst for base-free aerobic oxidation of HMF to FDCA in water

Amorphous Bismuth-Tin Oxide Nanosheets with Optimized C-N Coupling for Efficient Urea Synthesis

Controlled Synthesis of Sustainable N-doped Hollow Core-Mesoporous Shell Carbonaceous Nanospheres from Biomass

Construction of Ag‐Co(OH)2 Tandem Heterogeneous Electrocatalyst Induced Aldehyde Oxidation and the Co‐Activation of Reactants for Biomass Effective and Multi‐Selective Upgrading

Layered double hydroxides-based metal nanocatalysts: Confinement engineering, microenvironment effect and applications in catalytic conversion of biomass

Utilizing in situ construction of N-doped hierarchical porous carbon to achieve electronic control of highly dispersed Pd nanoparticles for efficient catalytic hydrogenation of CO 2 to formic acid

Pd-Based Nano-Catalysts Promote Biomass Lignin Conversion into Value-Added Chemicals

Highly Efficient and Stable Ni-based Catalyst for Selective Conversion of Biomass-Derived Aldehydes and Ketones to Primary Amines