INFANTS AMAUROSIS IN CAUSES OF SOMESCHOLARSHIP : LANG RESEARCH COMMITTEE OF THE REPORT TO THE

R. F. Moore,T. Lang,H. Neame,P. Doyne

Abstract:

What problem does this paper attempt to address?

Trajectory Optimization for 3D Shape-Changing Robots with Differential Mobile Base.

Mengke Zhang,Chao Xu,Fei Gao,Yanjun Cao

DOI: https://doi.org/10.1109/icra48891.2023.10160911

2023-01-01

Abstract:Service robots have attracted extensive attention due to specially designed functions, such as mobile manipulators or robots with extra structures. For robots that have changing shapes, autonomous navigation in the real world presents new challenges. In this paper, we propose a trajectory optimization method for differential-drive mobile robots with controllable changing shapes in dense 3D environments. We model the whole-body trajectory as a polynomial trajectory that satisfies the nonholonomic dynamics of the base and dynamics of the extra joints. These constraints are converted into soft constraints, and an activation function for dense sampling is applied to avoid nonlinear mutations. In addition, we guarantee the safety of full shape by limiting the system's distance from obstacles. To comprehensively simulate a large extent of height and width changes, we designed a novel Shape-Changing Robot with a Differential Base (SCR-DB). Our global trajectory optimization gives a smooth and collision-free trajectory for SCR-DB at a low computational cost. We present vast simulations and real-world experiments to validate our performance, including coupled whole-body and independent differential-driven vehicle motion planning.
On-line Real-Time Path Planning of Mobile Robots in Dynamic Uncertain Environment

Zhuang Hui-zhong,Du Shu-xin,Wu Tie-jun

DOI: https://doi.org/10.1631/jzus.2006.a0516

2006-01-01

Abstract:A new path planning method for mobile robots in globally unknown environment with moving obstacles is presented. With an autoregressive (AR) model to predict the future positions of moving obstacles, and the predicted position taken as the next position of moving obstacles, a motion path in dynamic uncertain environment is planned by means of an on-line real-time path planning technique based on polar coordinates in which the desirable direction angle is taken into consideration as an optimization index. The effectiveness, feasibility, high stability, perfect performance of obstacle avoidance, real-time and optimization capability are demonstrated by simulation examples.
Real-Time Path Planning for Mobile Robots

HZ Zhuang,SX Du,TJ Wu

DOI: https://doi.org/10.1109/icmlc.2005.1527001

2005-01-01

Abstract:A new on-line real-time approach with obstacle avoidance for mobile robots moving in an uncertain environment has been proposed and implemented. With the integration of global planning and local planning, this path planning approach is based on polar coordinates in which the desirable direction angle is taken into consideration as an optimization index. Detecting unknown obstacles with local feedback information by robot’s sensor system, this approach orients the desirable direction of mobile robot so as to generate local sub-goal in every planning window. As a result, the difference between real direction angle and desirable direction angle of robot motion steers the mobile robot to detour collisions and advance toward the target without stopping to re-plan a path when new sensor data become available. This approach is not only simple and flexible, but also overcomes flaws of global planning and local planning. The effectiveness, feasibility, real-time performance, optimization capability, high precision and perfect stability are demonstrated by means of simulation examples.
Efficient Motion Planning Based on Kinodynamic Model for Quadruped Robots Following Persons in Confined Spaces

Zhen Zhang,Jiaqing Yan,Xin Kong,Guangyao Zhai,Yong Liu

DOI: https://doi.org/10.1109/tmech.2021.3083594

2021-01-01

IEEE/ASME Transactions on Mechatronics

Abstract:Quadruped robots have superior terrain adaptability and flexible movement capabilities than traditional robots. In this article, we innovatively apply it in person-following tasks, and propose an efficient motion planning scheme for quadruped robots to generate a flexible and effective trajectory in confined spaces. The method builds a real-time local costmap via onboard sensors, which involves both static and dynamic obstacles. And we exploit a simplified kinodynamic model and formulate the friction pyramids formed by ground reaction forces’ inequality constraints to ensure the executable of the optimized trajectory. In addition, we obtain the optimal following trajectory in the costmap completely based on the robot's rectangular footprint description, which ensures that it can walk through the narrow spaces avoiding collision. Finally, a receding horizon control strategy is employed to improve the robustness of motion in complex environments. The proposed motion planning framework is integrated on the quadruped robot JueYing and tested in simulation as well as real scenarios. It shows that the execution success rates in various scenes are all over 90%.
An Efficient Trajectory Planner for Car-like Robots on Uneven Terrain

Li Xu,Kevin Chai,Zhichao Han,Hong Liu,Chao Xu,Ye Cao,Fei Gao

DOI: https://doi.org/10.48550/arxiv.2309.06115

2023-01-01

Abstract:Autonomous navigation of ground robots on uneven terrain is being considered in more and more tasks. However, uneven terrain will bring two problems to motion planning: how to assess the traversability of the terrain and how to cope with the dynamics model of the robot associated with the terrain. The trajectories generated by existing methods are often too conservative or cannot be tracked well by the controller since the second problem is not well solved. In this paper, we propose terrain pose mapping to describe the impact of terrain on the robot. With this mapping, we can obtain the SE(3) state of the robot on uneven terrain for a given state in SE(2). Then, based on it, we present a trajectory optimization framework for car-like robots on uneven terrain that can consider both of the above problems. The trajectories generated by our method conform to the dynamics model of the system without being overly conservative and yet able to be tracked well by the controller. We perform simulations and real-world experiments to validate the efficiency and trajectory quality of our algorithm.
A Cost-Effective Approach to Smooth A* Path Planning for Autonomous Vehicles

Lukas Schichler,Karin Festl,Selim Solmaz,Daniel Watzenig

2024-11-27

Abstract:Path planning for wheeled mobile robots is a critical component in the field of automation and intelligent transportation systems. Car-like vehicles, which have non-holonomic constraints on their movement capability impose additional requirements on the planned paths. Traditional path planning algorithms, such as A* , are widely used due to their simplicity and effectiveness in finding optimal paths in complex environments. However, these algorithms often do not consider vehicle dynamics, resulting in paths that are infeasible or impractical for actual driving. Specifically, a path that minimizes the number of grid cells may still be too curvy or sharp for a car-like vehicle to navigate smoothly. This paper addresses the need for a path planning solution that not only finds a feasible path but also ensures that the path is smooth and drivable. By adapting the A* algorithm for a curvature constraint and incorporating a cost function that considers the smoothness of possible paths, we aim to bridge the gap between grid based path planning and smooth paths that are drivable by car-like vehicles. The proposed method leverages motion primitives, pre-computed using a ribbon based path planner that produces smooth paths of minimum curvature. The motion primitives guide the A* algorithm in finding paths of minimal length and curvature. With the proposed modification on the A* algorithm, the planned paths can be constraint to have a minimum turning radius much larger than the grid size. We demonstrate the effectiveness of the proposed algorithm in different unstructured environments. In a two-stage planning approach, first the modified A* algorithm finds a grid-based path and the ribbon based path planner creates a smooth path within the area of grid cells. The resulting paths are smooth with small curvatures independent of the orientation of the grid axes and even in presence of sharp obstacles.

Robotics,Systems and Control
Search-Based Task and Motion Planning for Hybrid Systems: Agile Autonomous Vehicles

Zlatan Ajanović,Enrico Regolin,Barys Shyrokau,Hana Ćatić,Martin Horn,Antonella Ferrara

DOI: https://doi.org/10.1016/j.engappai.2023.105893

2023-01-25

Abstract:To achieve optimal robot behavior in dynamic scenarios we need to consider complex dynamics in a predictive manner. In the vehicle dynamics community, it is well know that to achieve time-optimal driving on low surface, the vehicle should utilize drifting. Hence many authors have devised rules to split circuits and employ drifting on some segments. These rules are suboptimal and do not generalize to arbitrary circuit shapes (e.g., S-like curves). So, the question "When to go into which mode and how to drive in it?" remains unanswered. To choose the suitable mode (discrete decision), the algorithm needs information about the feasibility of the continuous motion in that mode. This makes it a class of Task and Motion Planning (TAMP) problems, which are known to be hard to solve optimally in real-time. In the AI planning community, search methods are commonly used. However, they cannot be directly applied to TAMP problems due to the continuous component. Here, we present a search-based method that effectively solves this problem and efficiently searches in a highly dimensional state space with nonlinear and unstable dynamics. The space of the possible trajectories is explored by sampling different combinations of motion primitives guided by the search. Our approach allows to use multiple locally approximated models to generate motion primitives (e.g., learned models of drifting) and effectively simplify the problem without losing accuracy. The algorithm performance is evaluated in simulated driving on a mixed-track with segments of different curvatures (right and left). Our code is available at <a class="link-external link-https" href="https://git.io/JenvB" rel="external noopener nofollow">this https URL</a>

Robotics,Artificial Intelligence,Optimization and Control
MPPI-IPDDP: Hybrid Method of Collision-Free Smooth Trajectory Generation for Autonomous Robots

Min-Gyeom Kim,Minchan Jung,JunGee Hong,Kwang-Ki K. Kim

2024-10-30

Abstract:This paper presents a hybrid trajectory optimization method designed to generate collision-free, smooth trajectories for autonomous mobile robots. By combining sampling-based Model Predictive Path Integral (MPPI) control with gradient-based Interior-Point Differential Dynamic Programming (IPDDP), we leverage their respective strengths in exploration and smoothing. The proposed method, MPPI-IPDDP, involves three steps: First, MPPI control is used to generate a coarse trajectory. Second, a collision-free convex corridor is constructed. Third, IPDDP is applied to smooth the coarse trajectory, utilizing the collision-free corridor from the second step. To demonstrate the effectiveness of our approach, we apply the proposed algorithm to trajectory optimization for differential-drive wheeled mobile robots and point-mass quadrotors. In comparisons with other MPPI variants and continuous optimization-based solvers, our method shows superior performance in terms of computational robustness and trajectory smoothness. Code: <a class="link-external link-https" href="https://github.com/i-ASL/mppi-ipddp" rel="external noopener nofollow">this https URL</a> Video: <a class="link-external link-https" href="https://youtu.be/-oUAt5sd9Bk" rel="external noopener nofollow">this https URL</a>

Robotics,Systems and Control,Optimization and Control
Path Smoothing Techniques in Robot Navigation: State-of-the-Art, Current and Future Challenges

Abhijeet Ravankar,Ankit A Ravankar,Yukinori Kobayashi,Yohei Hoshino,Chao-Chung Peng

DOI: https://doi.org/10.3390/s18093170

2018-09-19

Abstract:Robot navigation is an indispensable component of any mobile service robot. Many path planning algorithms generate a path which has many sharp or angular turns. Such paths are not fit for mobile robot as it has to slow down at these sharp turns. These robots could be carrying delicate, dangerous, or precious items and executing these sharp turns may not be feasible kinematically. On the contrary, smooth trajectories are often desired for robot motion and must be generated while considering the static and dynamic obstacles and other constraints like feasible curvature, robot and lane dimensions, and speed. The aim of this paper is to succinctly summarize and review the path smoothing techniques in robot navigation and discuss the challenges and future trends. Both autonomous mobile robots and autonomous vehicles (outdoor robots or self-driving cars) are discussed. The state-of-the-art algorithms are broadly classified into different categories and each approach is introduced briefly with necessary background, merits, and drawbacks. Finally, the paper discusses the current and future challenges in optimal trajectory generation and smoothing research.
Path Planning of Mobile Robot With Improved Ant Colony Algorithm and MDP to Produce Smooth Trajectory in Grid-Based Environment

Hub Ali,Dawei Gong,Meng Wang,Xiaolin Dai

DOI: https://doi.org/10.3389/fnbot.2020.00044

IF: 3.493

2020-07-09

Frontiers in Neurorobotics

Abstract:This approach has been derived mainly to improve quality and efficiency of global path planning for a mobile robot with unknown static obstacle avoidance features in grid-based environment. The quality of the global path in terms of smoothness, path consistency and safety can affect the autonomous behavior of a robot. In this paper, the efficiency of Ant Colony Optimization (ACO) algorithm has improved with additional assistance of A* Multi-Directional algorithm. In the first part, A* Multi-directional algorithm starts to search in map and stores the best nodes area between start and destination with optimal heuristic value and that area of nodes has been chosen for path search by ACO to avoid blind search at initial iterations. The path obtained in grid-based environment consist of points in Cartesian coordinates connected through line segments with sharp bends. Therefore, Markov Decision Process (MDP) trajectory evaluation model is introduced with a novel reward policy to filter and reduce the sharpness in global path generated in grid environment. With arc-length parameterization, a curvilinear smooth route has been generated among filtered waypoints and produces consistency and smoothness in the global path. To achieve a comfort drive and safety for robot, lateral and longitudinal control has been utilized to form a set of optimal trajectories along the reference route, as well as, minimizing total cost. The total cost includes curvature, lateral and longitudinal coordinates constraints. Additionally, for collision detection, at every step the set of optimal local trajectories have been checked for any unexpected obstacle. The results have been verified through simulations in MATLAB compared with previous global path planning algorithms to differentiate the efficiency and quality of derived approach in different constraint environments.

robotics,computer science, artificial intelligence,neurosciences
Receding-Horizon Vision Guidance with Smooth Trajectory Blending in the Field of View of Mobile Robots

Xing Wu,Jorge Angeles,Ting Zou,Chao Sun,Qi Sun,Longjun Wang

DOI: https://doi.org/10.3390/app10020676

2020-01-18

Applied Sciences

Abstract:Applying computer vision to mobile robot navigation has been studied for over two decades. One of the most challenging problems for a vision-based mobile robot involves accurately and stably tracking a guide path in the robot limited field of view under high-speed manoeuvres. Pure pursuit controllers are a prevalent class of path tracking algorithms for mobile robots, while their performance is rather limited to relatively low speeds. In order to cope with the demands of high-speed manoeuvres, a multi-loop receding-horizon control framework, including path tracking, robot control, and drive control, is proposed in this paper. This is done within the vision guidance of differential-driving wheeled mobile robots (DWMRs). Lamé curves are used to synthesize a trajectory with G 2 -continuity in the field of view of the mobile robot for path tracking, from its current posture towards the guide path. The platform twist—point velocity and angular velocity—is calculated according to the curvature of the Lamé-curve trajectory, then transformed into actuated joint rates by means of the inverse-kinematics model; finally, the motor torques needed by the driving wheels are obtained based on the inverse-dynamics model. The whole multi-loop control process, initiated from Lamé-curve blending to computational torque control, is conducted iteratively by means of receding-horizon guidance to robustly drive the mobile robot manoeuvring close to the guide path. The results of numerical simulation show the effectiveness of our approach.
Dynamics-aware navigation among moving obstacles with application to ground and flying robots

Spyridon G. Tarantos,Tommaso Belvedere,Giuseppe Oriolo

DOI: https://doi.org/10.1016/j.robot.2023.104582

IF: 3.7

2024-02-01

Robotics and Autonomous Systems

Abstract:We present a novel method for navigation of mobile robots in challenging dynamic environments. The method, which is based on Nonlinear Model Predictive Control (NMPC), hinges upon a specially devised constraint for dynamics-aware collision avoidance. In particular, the constraint builds on the notion of avoidable collision state, taking into account the robot actuation capabilities in addition to the robot–obstacle relative distance and velocity. The proposed approach is applied to both ground and flying robots and tested in a variety of static and dynamic environments. Comparative simulations with an NMPC using a purely distance-based collision avoidance constraint confirm the superiority of the dynamics-aware version, especially for high-speed navigation among moving obstacles. Moreover, the results indicate that the method can work with relatively short prediction horizons and is therefore amenable to real-time implementation.

robotics,automation & control systems,computer science, artificial intelligence
Prioritized Multi-agent Path Finding for Differential Drive Robots

Konstantin Yakovlev,Anton Andreychuk,Vitaly Vorobyev

DOI: https://doi.org/10.1109/ECMR.2019.8870957

2019-11-25

Abstract:Methods for centralized planning of the collision-free trajectories for a fleet of mobile robots typically solve the discretized version of the problem and rely on numerous simplifying assumptions, e.g. moves of uniform duration, cardinal only translations, equal speed and size of the robots etc., thus the resultant plans can not always be directly executed by the real robotic systems. To mitigate this issue we suggest a set of modifications to the prominent prioritized planner -- AA-SIPP(m) -- aimed at lifting the most restrictive assumptions (syncronized translation only moves, equal size and speed of the robots) and at providing robustness to the solutions. We evaluate the suggested algorithm in simulation and on differential drive robots in typical lab environment (indoor polygon with external video-based navigation system). The results of the evaluation provide a clear evidence that the algorithm scales well to large number of robots (up to hundreds in simulation) and is able to produce solutions that are safely executed by the robots prone to imperfect trajectory following. The video of the experiments can be found at <a class="link-external link-https" href="https://youtu.be/Fer_irn4BG0" rel="external noopener nofollow">this https URL</a>.

Robotics,Multiagent Systems
SafeGuardPF: Safety Guaranteed Reactive Potential Fields for Mobile Robots in Unknown and Dynamic Environments

Rafael Rodrigues da Silva,Samuel Silva,Grigoriy Dubrovskiy,Hai Lin

DOI: https://doi.org/10.48550/arXiv.1609.07006

2016-09-22

Abstract:An autonomous navigation with proven collision avoidance in unknown and dynamic environments is still a challenge, particularly when there are moving obstacles. A popular approach to collision avoidance in the face of moving obstacles is based on model predictive algorithms, which, however, may be computationally expensive. Hence, we adopt a reactive potential field approach here. At every cycle, the proposed approach requires only current robot states relative to the closest obstacle point to find the potential field in the current position; thus, it is more computationally efficient and more suitable to scale up for multiple agent scenarios. Our main contribution here is to write the reactive potential field based motion controller as a hybrid automaton, and then formally verify its safety using differential dynamic logic. In particular, we can guarantee a passive safety property, which means that collisions cannot occur if the robot is to blame, namely a collision can occur only if the robot is at rest. The proposed controller and verification results are demonstrated via simulations and implementation on a Pioneer P3-AT robot.

Robotics,Multiagent Systems,Systems and Control
Path Planning Followed by Kinodynamic Smoothing for Multirotor Aerial Vehicles (MAVs)

G Kulathunga,Dmitry Devitt,D Devitt,R Fedorenko,A Klimchik,G. Kulathunga,,D. Devitt,R. Fedorenko,A. Klimchik,,,

DOI: https://doi.org/10.20537/nd210410

2021-01-01

Nelineinaya Dinamika

Abstract:Any obstacle-free path planning algorithm, in general, gives a sequence of waypoints that connect start and goal positions by a sequence of straight lines, which does not ensure the smoothness and the dynamic feasibility to maneuver the MAV. Kinodynamic-based motion planning is one of the ways to impose dynamic feasibility in planning. However, kinodynamic motion planning is not an optimal solution due to high computational demands for real-time applications. Thus, we explore path planning followed by kinodynamic smoothing while ensuring the dynamic feasibility of MAV. The main difference in the proposed technique is not to use kinodynamic planning when finding a feasible path, but rather to apply kinodynamic smoothing along the obtained feasible path. We have chosen a geometric-based path planning algorithm “RRT*” as the path finding algorithm. In the proposed technique, we modified the original RRT* introducing an adaptive search space and a steering function that helps to increase the consistency of the planner. Moreover, we propose a multiple RRT* that generates a set of desired paths. The optimal path from the generated paths is selected based on a cost function. Afterwards, we apply kinodynamic smoothing that will result in a dynamically feasible as well as obstacle-free path. Thereafter, a b-spline-based trajectory is generated to maneuver the vehicle autonomously in unknown environments. Finally, we have tested the proposed technique in various simulated environments. According to the experiment results, we were able to speed up the path planning task by 1.3 times when using the proposed multiple RRT* over the original RRT*.
Novel Adaptive Path-Smoothening Optimization Method for Mobile Robots

S. Y. Duan,Y. N. Qi,L. X. Zhang,Y. L. Li,F. Wang,G. R. Liu

DOI: https://doi.org/10.1142/s0219876224500051

IF: 1.7

2024-03-15

International Journal of Computational Methods

Abstract:International Journal of Computational Methods, Ahead of Print. A safe and smooth operating path is a prerequisite for mobile robots to accomplish tasks. Although the existing path optimization methods improve the smoothness of the planned path by introducing Bezier curve to locally optimize the path with regard to turning points, most of these methods manually select the position of control points and subjectively analyze the feasibility of the optimized path. It is argued unfavorably that it exhibits strong subjectivity and cumbersome selection process. To fill this gap, an adaptive path-smoothening optimization method is proposed in this study, which combines neural network, genetic algorithm, and Bezier curve to transform the path smoothing problem into an optimization problem. It rapidly determines the position of the optimal control point based on comprehension of constraints, e.g., path safety, curvature and kinematic restrains of the robot. The currently proposed method resolves the long-standing problems of strong subjectivity, cumbersome steps, and thus low efficiency in the selection process of control points, and lays the theoretical groundwork for smoothening the locus and path. To start with, according to the actual working conditions, the dataset corresponding to the position of the control point and the path deviation is constructed, and the neural network algorithm is used to solve the prediction model of the path deviation, so as to obtain the mapping relationship between the length and included angle of the control edge in the second-order Bezier curve and the path deviation. Subsequently, with reference to the prediction model of path deviation, a reliability evaluation function is formulated by comprehending multiple influential factors of mobile robot motion safety and path smoothness. The genetic algorithm is then introduced to detect the satisfactory control points in different environments. The currently proposed method is verified by experiments in different operating environments. The study results show that the currently proposed adaptive path-smoothening optimization method exhibits remarkably superior applicability and effectiveness compared to the currently prevailing methods. It demonstrates advantages of fast path planning, reduced path turning points, and desirable path smoothness. In addition, it can also ensure the safety of mobile robot along the planned path as availed by a pre-set criterion.

engineering, multidisciplinary,mathematics, interdisciplinary applications
Real-time Motion Planning for autonomous vehicles in dynamic environments

Mohammad Dehghani Tezerjani,Dominic Carrillo,Deyuan Qu,Sudip Dhakal,Amir Mirzaeinia,Qing Yang

2024-06-05

Abstract:Recent advancements in self-driving car technologies have enabled them to navigate autonomously through various environments. However, one of the critical challenges in autonomous vehicle operation is trajectory planning, especially in dynamic environments with moving obstacles. This research aims to tackle this challenge by proposing a robust algorithm tailored for autonomous cars operating in dynamic environments with moving obstacles. The algorithm introduces two main innovations. Firstly, it defines path density by adjusting the number of waypoints along the trajectory, optimizing their distribution for accuracy in curved areas and reducing computational complexity in straight sections. Secondly, it integrates hierarchical motion planning algorithms, combining global planning with an enhanced $A^*$ graph-based method and local planning using the time elastic band algorithm with moving obstacle detection considering different motion models. The proposed algorithm is adaptable for different vehicle types and mobile robots, making it versatile for real-world applications. Simulation results demonstrate its effectiveness across various conditions, promising safer and more efficient navigation for autonomous vehicles in dynamic environments. These modifications significantly improve trajectory planning capabilities, addressing a crucial aspect of autonomous vehicle technology.

Robotics
Recent progress in trajectory smoothing of mobile robots

Xinlin Zhang

DOI: https://doi.org/10.1088/1742-6596/2649/1/012021

2023-12-07

Journal of Physics Conference Series

Abstract:The mobile robotics is growing rapidly and is being used in a variety of applications, greatly improving productivity. Path planning is a central part of autonomous navigation for mobile robots. However, most paths generated by these methods have sharp turns, which are unacceptable for mobile robots due to their own motion limitations or specific task scenarios. Smoother paths are therefore needed to improve the reliability and efficiency of the robot while adapting to realistic scenarios. This paper summarizes the classical curve smoothing algorithms and relate new research results presented in recent years, and divide them into six categories: polynomial interpolation, non-uniformly interpolated curves, Beizer curves, B spline curves, Reeds-Shepp curves, geometric algorithms, etc. Besides, a brief mathematical description is given along with the algorithms, and some of the algorithms are also given as examples for reference. In the future, better curve smoothing algorithms to satisfy the kinematic laws of different vehicles (robots/ships/UAVs) in multiple environments and non-simple interpolation smoothing algorithms will be proposed.
Trend-aware motion planning for wheeled mobile robots operating in dynamic environments

Sheng Liu,Fengji Dai,Shaobo Zhang,Yangqing Wang,Zhenhua Wang

DOI: https://doi.org/10.1177/1729881420925292

IF: 1.714

2020-07-01

International Journal of Advanced Robotic Systems

Abstract:Planning collision-free trajectories is essential for wheeled mobile robots operating in dynamic environments safely and efficiently. Most current trajectory generation methods focus on achieving optimal trajectories in static maps and considering dynamic obstacles as static depending on the precise motion estimation of the obstacles. However, in realistic applications, dealing with dynamic obstacles that have low reliable motion estimation is a common situation. Furthermore, inaccurate motion estimation leads to poor quality of motion prediction. To generate safe and smooth trajectories in such a dynamic environment, we propose a motion planning algorithm called trend-aware motion planning (TAMP) for dynamic obstacle avoidance, which combines with timed-elastic band. Instead of considering dynamic obstacles as static, our planning approach predicts the moving trends of the obstacles based on the given estimation. Subsequently, the approach generates a trajectory away from dynamic obstacles, meanwhile, avoiding the moving trends of the obstacles. To cope with multiple constraints, an optimization approach is adopted to refine the generated trajectory and minimize the cost. A comparison of our approach against other state-of-the-art methods is conducted. Results show that trajectories generated by TAMP are robust to handle the poor quality of obstacles’ motion prediction and have better efficiency and performance.

robotics

INFANTS AMAUROSIS IN CAUSES OF SOMESCHOLARSHIP : LANG RESEARCH COMMITTEE OF THE REPORT TO THE

Trajectory Optimization for 3D Shape-Changing Robots with Differential Mobile Base.

On-line Real-Time Path Planning of Mobile Robots in Dynamic Uncertain Environment

Real-Time Path Planning for Mobile Robots

Efficient Motion Planning Based on Kinodynamic Model for Quadruped Robots Following Persons in Confined Spaces

An Efficient Trajectory Planner for Car-like Robots on Uneven Terrain

A Cost-Effective Approach to Smooth A* Path Planning for Autonomous Vehicles

Search-Based Task and Motion Planning for Hybrid Systems: Agile Autonomous Vehicles

MPPI-IPDDP: Hybrid Method of Collision-Free Smooth Trajectory Generation for Autonomous Robots

Path Smoothing Techniques in Robot Navigation: State-of-the-Art, Current and Future Challenges

Path Planning of Mobile Robot With Improved Ant Colony Algorithm and MDP to Produce Smooth Trajectory in Grid-Based Environment

Receding-Horizon Vision Guidance with Smooth Trajectory Blending in the Field of View of Mobile Robots

Dynamics-aware navigation among moving obstacles with application to ground and flying robots

Prioritized Multi-agent Path Finding for Differential Drive Robots

SafeGuardPF: Safety Guaranteed Reactive Potential Fields for Mobile Robots in Unknown and Dynamic Environments

Path Planning Followed by Kinodynamic Smoothing for Multirotor Aerial Vehicles (MAVs)

Novel Adaptive Path-Smoothening Optimization Method for Mobile Robots

Real-time Motion Planning for autonomous vehicles in dynamic environments

Recent progress in trajectory smoothing of mobile robots

Trend-aware motion planning for wheeled mobile robots operating in dynamic environments