[Regulation of the NAD specific isocitrate dehydrogenase activity of potato tubercle mitochondria].

G. Ribéreau-Gayon,G. Laties

1969-05-28

Abstract:

What problem does this paper attempt to address?

[Acute transverse myelitis after allogeneic bone marrow transplantation for acute lymphoblastic leukemia--a case report].

M. Manabe,M. Nishimoto,Kazuhiro Ito,H. Okamura,M. Bingo,Masahiro Yoshida,A. Inoue,M. Aimoto,Y. Hayashi,H. Koh,T. Nakane,M. Nakamae,Y. Terada,H. Nakamae,T. Nakao

2013-04-01

Abstract:Transverse myelitis is an inflammatory disorder of the spinal cord that results in motor, sensory, and autonomic dysfunction. Herein, we describe a 40-year-old Japanese female who developed acute transverse myelitis (ATM) after an unrelated bone marrow transplantation for Philadelphia-positive acute lymphoblastic leukemia in molecular complete remission. Approximately 90 days after transplantation, she suffered from paresthesias, sphincter dysfunction, and lower extremity weakness. Spinal cord magnetic resonance imaging scan demonstrated findings consistent with ATM. The symptoms were resolved with the administration of steroids, followed by intravenous immunoglobulin therapy for a few sequelae. To the best of our knowledge, the presentation of ATM after hematopoietic stem cell transplantation is relatively rare. As the functional prognosis of ATM depends on prompt diagnosis and treatment, we consider that ATM should be included in the differential diagnosis of post-transplant myelopathies.
Stabilizing effect of an elbow orthosis with an adjustable hinge axis after lateral collateral ligament injury: A biomechanical study

Armin Badre,David T Axford,Sara Kotzer,James A Johnson,Graham Jw King

DOI: https://doi.org/10.1177/17585732221128964

Abstract:Background: Current commercial elbow braces have a straight hinge that does not account for the native carrying angle of the elbow. The objective of this study was to determine the effectiveness of a custom-designed hinged elbow orthosis (HEO) with variable valgus angulations in stabilizing a lateral collateral ligament (LCL) deficient elbow. Methods: Eight cadaveric upper extremities were mounted in an elbow motion simulator in the abducted varus gravity-loaded position. The specimens were examined before and after simulated LCL injury and then with the addition of the custom-designed HEO with 0°, 10°, and 20° of valgus angulation. Kinematic data were recorded using an electromagnetic tracking system. Results: The LCL injured state with or without the brace resulted in significant increases in varus angulation of the elbow compared to the intact state in both pronation and supination (P < 0.05). There were no significant differences in varus-valgus angulation or ulnohumeral rotation between any of the brace angles and the LCL injured state with the forearm pronated and supinated. Discussion: The custom-designed HEO did not provide any additional stability to the LCL injured elbow. The varus arm position should be avoided during the rehabilitation of an LCL injured elbow even when an HEO is used.
A Novel Hemiarthroplasty Design for Treatment of Post-traumatic Elbow Ankylosis and Distal Humerus Nonunion: A Case Report

Andrew M Gabig,Jacob A Malmquist,Christina I Brady,Anil K Dutta

DOI: https://doi.org/10.2106/JBJS.CC.22.00393

2022-10-27

Abstract:Case: A 26 year old man sustained a blast injury to the right elbow, resulting in chronic distal humerus nonunion and post-traumatic ankylosis. After debridement and flap coverage, a custom distal humerus hemiarthroplasty construct with extramedullary orthogonal plating was used. Satisfaction and functional outcomes were maintained through 6 years of follow-up. Conclusion: This case presents a unique 1-stage surgical solution which demonstrates the potential for uncemented extramedullary hemiarthroplasty fixation with simultaneous compression plate osteosynthesis across a nonunion site. The potential for hemiarthroplasty designs to be linked to orthogonal plates preserves the intramedullary canal for future conversion to total elbow arthroplasty if necessary.
Effect of Elbow Position on Load to Failure in Olecranon Fracture Fixation: A Biomechanical Cadaveric Study

Robert W. Lindeman,Randal Morris,Paul Weatherby,Adam Neustein,Nicholas H. Maassen

DOI: https://doi.org/10.1097/BOT.0000000000001423

2019-10-07

Journal of Orthopaedic Trauma

Abstract:Objectives: This study evaluates if relative flexion or extension of the ulnohumeral joint affects the strength of repair in olecranon fractures treated with a precontoured locking plate. Methods: A cadaveric study was performed in matched pair cadaveric elbows. All soft tissue was dissected from the radius, ulna, and elbow of each specimen, leaving interosseous ligaments and joint capsules intact. Soft tissue from the humerus was dissected away, leaving only the triceps tendon and ulnar insertions intact. An oblique proximal to distal olecranon osteotomy was created in each specimen 1 cm from the tip of the olecranon. Internal fixation with standard precontoured locking plates and a Krackow augmentation suture with #2 FiberWire followed. Specimens were randomized to elbow position of 90 or 20 degrees° and loaded to failure via axial pull through the triceps. Load at failure, displacement at the time of failure, peak load, stiffness, and mechanism of failure was recorded and compared. The study was repeated a second time with the osteotomy more proximal, 0.6 cm creating a smaller fragment with less opportunities for locking screw fixation. This small fragment group was then tested as the large fragment group had. Results: There were no significant differences in load at failure, peak load, or stiffness between the elbow position in the large fragment group. Displacement at time of failure was significantly different, although not clinically relevant. Failure of fixation in this group was a mix of triceps avulsion and failure through fracture site. The smaller fragment group with less points of fixation demonstrated no statistically significant differences in any parameters. A majority of the failures were at the fracture site. Conclusions: Ulnohumeral position does not significantly affect overall construct strength even in olecranon fractures with small proximal fragments with limited points of fixation.

orthopedics,sport sciences
Biomechanical Evaluation of a Low-Invasive Elbow Medial Collateral Ligament Reconstruction Technique With Fascia and Tendon Patches

Wenjun Liu,Hao Xiong,Shuai Chen,Jingwei Zhang,Wei Wang,Yun Qian,Cunyi Fan

DOI: https://doi.org/10.3389/fbioe.2022.831545

IF: 5.7

2022-03-22

Frontiers in Bioengineering and Biotechnology

Abstract:Background: Injury to the medial collateral ligament (MCL) of the elbow has become increasingly common in sports, and the elbow is prone to contracture and ossification in trauma. Effective reconstruction of the MCL with reduction of irritation to the elbow has rarely been reported. This study introduces a minimally invasive elbow MCL reconstruction technique and evaluates the valgus stability. Methods: Eight fresh-frozen elbow specimens underwent reconstruction of the anterior bundle of the MCL (AMCL) first with the flexor carpi ulnaris fascia patches, followed by reconstruction of the posterior bundle of the MCL (PMCL) with the triceps tendon patches. The valgus angles of each specimen were examined in three stages as follows: intact MCL, reconstruction of the AMCL alone, and reconstruction of the MCL (including AMCL and PMCL). Finally, specimens were loaded to failure, and failure modes were recorded. Results: AMCL reconstruction alone had similar valgus stability at all testing angles ( p = 0.080, 30° flexion; p = 0.064, 60° flexion; p = 0.151, 90° flexion; p = 0.283, 120° flexion) compared with the intact MCL, as did MCL reconstruction ( p = 0.951, 30° flexion; p = 0.739, 60° flexion; p = 0.841, 90° flexion; p = 0.538, 120° flexion). More importantly, a significant difference existed between the MCL reconstruction and the AMCL reconstruction alone at 30° flexion ( p = 0.043) and 60° flexion ( p = 0.013) but not at the 90° flexion ( p = 0.369) and 120° flexion ( p = 0.879). The mean maximum failure torque of MCL reconstruction was 24.02 Nm at 90° elbow flexion. Conclusion: Both AMCL reconstruction alone and MCL reconstruction provided valgus stability comparable with the native MCL, and importantly, MCL reconstruction provided more valgus stability than AMCL reconstruction alone at 30° flexion and 60° flexion of the elbow. Therefore, the new MCL reconstruction technique might be a useful guide for the treatment of elbow MCL injuries or deficiencies.

multidisciplinary sciences
[Selection of a graft for plastic surgery of defects in the soft tissues of the foot].

V. Krylov,N. Milanov,N. I. Antokhiĭ

Abstract:
Quantum efficiency model for the CCD flash gate

J. Janesick,D. Campbell

DOI: https://doi.org/10.1109/IEDM.1986.191189

Abstract:A model is presented that predicts the quantum efficiency performance for the backside-illuminated CCD accumulated with a flash gate. Predicted values from this model are compared to experimental measurements taken from a flash gated CCD. We discuss critical CCD parameters used in the model that be controlled to achieve optimum response over a wide spectral range.
Traumatic valgus instability of the elbow: pathoanatomy and results of direct repair

Marc J Richard,J Mack Aldridge 3rd,Ethan R Wiesler,David S Ruch

DOI: https://doi.org/10.2106/JBJS.G.01448

Abstract:Background: The medial collateral ligament provides valgus stability to the elbow. The purpose of the present study was to describe the pathoanatomy of acute traumatic medial collateral ligament ruptures and to report the rationale and results of direct repair. Methods: Between 1996 and 2006, eleven athletes presented with acute rupture of the medial collateral ligament of the elbow and no history of dislocation. Three patients had received steroid injections for the treatment of medial epicondylitis, but none had a history of medial elbow insufficiency. All patients demonstrated gross valgus instability on clinical examination and medial joint space widening on valgus stress radiographs. Complete avulsion of the medial collateral ligament from its humeral origin was documented with magnetic resonance imaging in all patients. Operative findings uniformly demonstrated avulsion of the flexor-pronator muscles with distal retraction. The underlying medial collateral ligament was avulsed in a sleeve-like fashion from the denuded medial epicondyle. The ligament was directly reattached to its footprint. The avulsed flexor-pronator tendon was repaired to the residual tendon with use of interrupted figure-of-eight nonabsorbable sutures. All patients were followed for a minimum of sixteen months with serial clinical examinations, radiographs, and the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire. Results: Full active range of motion was achieved in ten patients; the remaining patient had a 20 degrees flexion contracture. Three patients had acute ulnar nerve palsies at the time of the injury, and all three recovered complete motor and sensory function by six months after the injury. Nine of the eleven patients returned to competitive college athletics between four and six months. The mean DASH score at the time of the most recent follow-up was 6. Conclusions: Direct repair of an acute traumatic medial collateral ligament avulsion of the elbow reliably restores valgus stability, even in throwing athletes.
Traumatic valgus instability of the elbow: pathoanatomy and results of direct repair. Surgical technique

Marc J Richard,J Mack Aldridge 3rd,Ethan R Wiesler,David S Ruch

DOI: https://doi.org/10.2106/JBJS.I.00426

Abstract:Background: The medial collateral ligament provides valgus stability to the elbow. The purpose of the present study was to describe the pathoanatomy of acute traumatic medial collateral ligament ruptures and to report the rationale and results of direct repair. Methods: Between 1996 and 2006, eleven athletes presented with acute rupture of the medial collateral ligament of the elbow and no history of dislocation. Three patients had received steroid injections for the treatment of medial epicondylitis, but none had a history of medial elbow insufficiency. All patients demonstrated gross valgus instability on clinical examination and medial joint space widening on valgus stress radiographs. Complete avulsion of the medial collateral ligament from its humeral origin was documented with magnetic resonance imaging in all patients. Operative findings uniformly demonstrated avulsion of the flexor-pronator muscles with distal retraction. The underlying medial collateral ligament was avulsed in a sleeve-like fashion from the denuded medial epicondyle. The ligament was directly reattached to its footprint. The avulsed flexor-pronator tendon was repaired to the residual tendon with use of interrupted figure-of-eight nonabsorbable sutures. All patients were followed for a minimum of sixteen months with serial clinical examinations, radiographs, and the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire. Results: Full active range of motion was achieved in ten patients; the remaining patient had a 20 degrees flexion contracture. Three patients had acute ulnar nerve palsies at the time of the injury, and all three recovered complete motor and sensory function by six months after the injury. Nine of the eleven patients returned to competitive college athletics between four and six months. The mean DASH score at the time of the most recent follow-up was 6. Conclusions: Direct repair of an acute traumatic medial collateral ligament avulsion of the elbow reliably restores valgus stability, even in throwing athletes.
Weak Points of Double-Plate Stabilization Used in the Treatment of Distal Humerus Fracture through Finite Element Analysis

Artur Kruszewski,Szczepan Piszczatowski,Piotr Piekarczyk,Piotr Cieślik,Krzysztof Kwiatkowski

DOI: https://doi.org/10.3390/jcm13041034

IF: 3.9

2024-02-12

Journal of Clinical Medicine

Abstract:Background: Multi-comminuted, intra-articular fractures of the distal humerus still pose a challenge to modern orthopedics due to unsatisfactory treatment results and a high percentage (over 50%) of postoperative complications. When surgical treatment is chosen, such fractures are fixed using two plates with locking screws, which can be used in three spatial configurations: either parallel or one of two perpendicular variants (posterolateral and posteromedial). The evaluation of the fracture healing conditions for these plate configurations is unambiguous. The contradictions between the conclusions of biomechanical studies and clinical observations were the motivation to undertake a more in-depth biomechanical analysis aiming to indicate the weak points of two-plate fracture stabilization. Methods: Research was conducted using the finite element method based on an experimentally validated model. Three variants of distal humerus fracture (Y, λ, and H) were fixed using three different plate configurations (parallel, posterolateral, and posteromedial), and they were analyzed under six loading conditions, covering the whole range of flexion in the elbow joint (0–145°). A joint reaction force equal to 150 N was assumed, which corresponds with holding a weight of 1 kg in the hand. The biomechanical conditions of bone union were assessed based on the interfragmentary movement (IFM) and using criteria formulated by Steiner et al. Results: The IFMs were established for particular regions of all of the analyzed types of fracture, with distinction to the normal and tangential components. In general, the tangential component of IFM was greater than normal. A strong influence of the elbow joint's angular position on the IFM was observed, with excessive values occurring for flexion angles greater than 90°. In most cases, the smallest IFM values were obtained for the parallel plaiting, while the greatest values were obtained for the posteromedial plating. Based on IFM values, fracture healing conditions in particular cases (fracture type, plate configuration, loading condition, and fracture gap localization) were classified into one of four groups: optimal bone union (OPT), probable union (PU), probable non-union (PNU), and non-union (NU). Conclusions: No plating configuration is able to ensure distal humerus fracture union when the full elbow flexion is allowed while holding a weight of 1 kg in the hand. However, flexion in the range of 0–90° with such loadings is acceptable when using parallel plating, which is a positive finding in the context of the early rehabilitation process. In general, parallel plating ensures better conditions for fracture healing than perpendicular plate configurations, especially the posteromedial version.

medicine, general & internal
Coupling of downhill ion movements in human red cells in the absence of external potassium.

A. Lant,R. Whittam

1969-03-01

Journal of Physiology

Abstract:
Scapholunate Ligament Reconstruction With Internal Brace Augmentation Techniques for Chronic Scapholunate Dissociation: A Clinical Follow-up Study

Young Sun An,Sang Ki Lee,Won Sik Choy

DOI: https://doi.org/10.1097/SAP.0000000000003942

2024-07-01

Abstract:Introduction: The scapholunate ligament is the most important stabilizer of the scapholunate articulation. The management of chronic irreversible injuries of this ligament in the absence of preexisting arthritis of the wrist joint remains controversial. Recently, surgeons introduced a novel surgical technique using an internal brace (IB). Several biomechanical studies on this technique have been conducted using cadavers; however, very few studies have discussed the results in detail in actual clinical practice. Therefore, herein, we investigated the radiological and functional results of patients who underwent IB augmentation as a treatment for chronic scapholunate dissociation. Methods: This retrospective study was conducted from April 2018 to May 2022. Twenty-two patients with chronic scapholunate dissociation were treated using the IB augmentation technique, of whom 17 were followed-up for at least 1 year. Radiological results, including scapholunate distance, scapholunate angle, and radioscaphoid angle, were collected. Furthermore, clinical parameters, such as the visual analog scale (preoperative and at final follow-up), the Disabilities of the Arm, Shoulder, and Hand scores (preoperatively and at 3, 6, and 12 months postoperatively), and Mayo wrist scores (preoperative and at final follow-up), were measured. Results: The scapholunate distance increased significantly in the affected wrist compared to the unaffected wrist, which improved after reconstruction in all wrist positions ( P < 0.05). Compared to the unaffected wrist, the scapholunate angle increased significantly in all positions ( P < 0.05) except for extension ( P = 0.535) and improved after reconstruction in all wrist positions. The radioscaphoid angle significantly increased compared to the angle of the unaffected wrist in all positions ( P < 0.05) except for extension ( P = 0.602) and clenched fist ( P = 0.556). This angle improved after reconstruction in all wrist positions except for extension ( P = 0.900). The visual analog scale score (7-2, preoperatively and at final follow-up) and Mayo wrist score (53-82, preoperatively and at final follow-up) improved after surgery. The Disabilities of the Arm, Shoulder, and Hand scores also improved after surgery (68, 53, 30, 7, preoperatively and at 3, 6, and 12 months postoperatively). Conclusions: This study revealed that scapholunate ligament reconstruction using an autologous tendon and suture tape is a good reconstruction technique that can improve clinical symptoms and radiographic parameters with a shorter operation time and fewer complications than other reconstruction methods.
Ulnohumeral Cross-Pinning in the Management of Traumatic Elbow Instability

Nick Brule,Yagiz Ozdag,Jessica L. Koshinski,A. Michael Luciani,Louis C. Grandizio

DOI: https://doi.org/10.1016/j.jhsa.2024.06.003

IF: 2.342

2024-07-13

The Journal Of Hand Surgery

Abstract:Purpose Traumatic elbow instability (subluxation and dislocation) represents a challenging clinical entity that can be complicated by persistent intraoperative instability after attempted stabilization or recurrent postoperative instability. Both static and dynamic supplemental stabilization procedures have been described for cases where fracture fixation and ligament repair fail to restore stability. There is a paucity of prior studies involving ulnohumeral cross-pinning (UCP), which is a type of static supplemental stabilization. Our purpose was to assess complications and outcomes after UCP. Methods We reviewed all surgical cases involving primary and revision UCP for traumatic elbow instability at a single center from 2017–2023. Baseline demographics were recorded. Outcomes including radiographs, range of motion, patient-reported outcome measures, and surgical complications were analyzed. Results Fourteen patients undergoing UCP were included with a mean follow-up of 27 months. Five cross-pinnings (36%) were performed during revision procedures. Mean visual analog scale (VAS) pain, Disabilities of the Arm, Shoulder, and Hand (QuickDASH), and the Single Assessment Numeric Evaluation (SANE) scores were 2.4, 34, and 69, respectively. The mean flexion–extension and pronation–supination arcs were 114° and 140°, with 85% achieving at least a 100° arc for flexion and forearm rotation. Five patients (36%) had complications, all of which required reoperation. Two complications involved postoperative instability: one radial head subluxation and one radial head dislocation. Both occurred in revision UCP cases indicated for recurrent postoperative instability. Conclusions Ulnohumeral cross-pinning for persistent and recurrent elbow instability results in maintained ulnohumeral joint alignment, functional arcs of elbow range of motion, and acceptable patient-reported outcome measures, particularly in the setting of a primary procedure indicated for persistent intraoperative instability. Ulnohumeral cross-pinning is a reasonable supplemental stabilization procedure for complex elbow instability. Type of study/level of evidence Therapeutic IV.

surgery,orthopedics
Cemented vs. Press-Fit Humeral Stems: A Matched Cohort Analysis at a Mean Follow-Up of 10 years

Troy Li,Akiro H. Duey,Akshar V. Patel,Christopher A. White,Kenneth H. Levy,William A. Ranson,Carl M. Cirino,Dave Shukla,Bradford O. Parsons,Evan L. Flatow,Paul J. Cagle

DOI: https://doi.org/10.1016/j.jse.2023.11.029

IF: 3.507

2024-01-19

Journal of Shoulder and Elbow Surgery

Abstract:Introduction While cementation of humeral stems has long been considered the gold standard for anatomic shoulder arthroplasty (aTSA), cementless, or press-fit, fixation offers a relatively cheaper and less demanding alternative, particularly in the setting of a revision procedure. However, this approach has been accompanied by concerns of implant loosening and high rates of radiolucency. In the present study we performed a propensity matched comparison of clinical and patient-reported outcomes between cemented and cementless fixation techniques for aTSA. Methods This study was a retrospective comparison of 50 shoulders undergoing aTSA: 25 using cemented humeral fixation versus 25 using press-fit humeral fixation. Patients in the two groups were propensity matched according to age, sex, and preoperative ASES score. Primary outcome measures included range of motion (ROM) (forward elevation, external rotation, internal rotation), patient reported outcomes (American Shoulder and Elbow Surgeons (ASES), Simple Shoulder Test (SST), Visual Analog Scores (VAS)), and implant survival. Results At baseline, the two fixation groups were similar in regard to age, sex, BMI, preoperative ASES score, and surgical indication. Mean follow-up was 11.7 ± 4.95 years in the cemented cohort and 9.13 ± 3.77 years in the press-fit cohort (p=0.045). Both groups demonstrated significant improvements postoperatively in all included ROM and patient-reported outcomes. However, press-fit patients reported significantly better VAS, ASES, and SST scores. Mean VAS pain score was 1.1 ± 1.8 in press-fit patients and 3.2 ± 3.0 in cemented patients (p=0.005). The mean ASES score was 87.7 ± 12.4 in press-fit patients and 69.5 ± 22.7 in cemented patients (p=0.002). Lastly, the mean SST score was 9.8 ± 3.1 in press-fit patients and 7.7 ± 3.7 in cemented patients (p=0.040). Both fixation techniques provided lasting implant survivorship with only a single revision operation in each of the cohorts. Conclusion Herein, we provide a propensity matched, long-term comparison of patients receiving anatomic shoulder arthroplasty stratified according to humeral stem fixation technique. The results of this analysis illustrate that both types of humeral fixation techniques yield durable and significant improvements in shoulder function with similar rates of survival at 10 years of follow-up.

surgery,orthopedics,sport sciences
A Comparative Biomechanical Study of Alternative Medial Collateral Ligament Reconstruction Techniques

Jobe Shatrov,Petra Bonacic Bartolin,Sander R Holthof,Simon Ball,Andy Williams,Andrew A Amis,Sander R. Holthof,Andrew A. Amis

DOI: https://doi.org/10.1177/03635465241235858

IF: 4.8

2024-03-31

The American Journal of Sports Medicine

Abstract:The American Journal of Sports Medicine, Ahead of Print. Background:There is little evidence of the biomechanical performance of medial collateral ligament (MCL) reconstructions for restoring stability to the MCL-deficient knee regarding valgus, external rotation (ER), and anteromedial rotatory instability (AMRI).Hypothesis:A short isometric reconstruction will better restore stability than a longer superficial MCL (sMCL) reconstruction, and an additional deep MCL (dMCL) graft will better control ER and AMRI than single-strand reconstructions.Study Design:Controlled laboratory study.Methods:Nine cadaveric human knees were tested in a kinematics rig that allowed tibial loading while the knee was flexed-extended 0° to 100°. Optical markers were placed on the femur and tibia and displacements were measured using a stereo camera system. The knee was tested intact, and then after MCL (sMCL + dMCL) transection, and loaded in anterior tibial translation (ATT), ER, varus-valgus, and combined ATT + ER (AMRI loading). Five different isometric MCL reconstructions were tested: isolated long sMCL, a short construct, each with and without dMCL addition, and isolated dMCL reconstruction, using an 8 mm–wide synthetic graft.Results:MCL deficiency caused an increase in ER of 4° at 0° of flexion (P = .271) up to 14° at 100° of flexion (P = .002), and valgus laxity increased by 5° to 8° between 0° and 100° of flexion (P .999). All 5 reconstructions restored native stability across the arc of flexion apart from the isolated long sMCL, which demonstrated residual ER instability (P≤ .047 vs other reconstructions).Conclusion:All tested techniques apart from the isolated long sMCL graft are satisfactory in the context of restoring the valgus, ER, and AMRI stability to the MCL-deficient knee in a cadaveric model.Clinical Relevance:Contemporary MCL reconstruction techniques fail to control ER and therefore AMRI as they use a long sMCL graft and do not address the dMCL. This study compares 5 MCL reconstruction techniques. Both long and short isometric constructs other than the long sMCL achieved native stability in valgus and ER/AMRI. Double-strand reconstructions (sMCL + dMCL) tended to provide more stability. This study shows which reconstructions demonstrate the best biomechanical performance, informs surgical reconstruction techniques for AMRI, and questions the efficacy of current popular techniques.

orthopedics,sport sciences
[Technical modifications to elbow interposition arthroplasty]

Christoph-Johannes Pucher,Tim Leschinger,Nadine Ott,Lars Peter Müller,Michael Hackl

DOI: https://doi.org/10.1007/s00064-024-00847-9

Abstract:Objective: Interposition arthroplasty of the elbow involves the interposition of a fascia lata or dermis autograft or allograft between the distal humerus and the ulna or radius, while preserving the original form of articulation. Indications: Interposition arthroplasty is indicated for young patients with high functional demands who suffer from end-stage elbow arthritis and associated pain or joint stiffness. Contraindications: Contraindications include acute or subacute infection, skeletal immaturity, bone loss, deformity, or gross instability. Surgical technique: Once the ulnar nerve has been secured, joint access is established via a posterior approach. The radial collateral ligament (RCL) and the common extensor tendon origin (CEO) are detached, while preserving the anconeus muscle and the lateral ulnar collateral ligament (LUCL). Subsequently, a capsular release is required to maintain adequate joint exposure and address the accompanying stiffness. Three to four transosseous drill holes are placed at the level of the distal humerus to secure the graft. After the graft has been positioned successfully within the joint space using two guide sutures, it can be secured to the distal humerus using a horizontal mattress stitch. Finally, the detached tendon and ligament structures are reconstructed. Postoperative management: After initial immobilization, early functional exercise of the elbow is performed in the motion orthosis, avoiding valgus or varus stress. Results: The efficacy of elbow interposition arthroplasty has been demonstrated, particularly for young and active patients with severe inflammatory or post-traumatic osteoarthritis. Despite the results in terms of postoperative function and pain reduction are satisfactory, the current literature reports high complication, subsequent treatment, and revision rates. In the event of interposition arthroplasty failure, revision with another interposition procedure or conversion to endoprosthesis may be considered.
Study of a constrained finite element elbow prosthesis: the influence of the implant placement

Lorenzo Nalbone,Francesco Monac,Luca Nalbone,Tommaso Ingrassia,Vito Ricotta,Vincenzo Nigrelli,Massimo Ferruzza,Luigi Tarallo,Giuseppe Porcellini,Lawrence Camarda

DOI: https://doi.org/10.1186/s10195-023-00690-x

2023-04-13

Abstract:Background: The functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic configuration, identify the areas of greatest stress in the prosthesis-bone-cement interface, and evaluate the most wearing working conditions. Materials and methods: By means of a reverse engineering process and using a 3D laser scanner, CAD (computer-aided drafting) models of a constrained elbow prosthesis were acquired. These CAD models were developed and their elastic properties, resistance, and stresses were studied through finite element analysis (finite element method-FEM). The obtained 3D elbow-prosthesis model was then evaluated in cyclic flexion-extension movements (> 10 million cycles). We highlighted the configuration of the angle at which the highest stresses and the areas most at risk of implant mobilization develop. Finally, we performed a quantitative study of the stress state after varying the positioning of the stem of the ulnar component in the sagittal plane by ± 3°. Results: The greatest von Mises stress state in the bone component for the 90° working configuration was 3.1635 MPa, which occurred in the most proximal portion of the humeral blade and in the proximal middle third of the shaft. At the ulnar level, peaks of 4.1763 MPa were recorded at the proximal coronoid/metaepiphysis level. The minimum elastic resistance and therefore the greatest stress states were recorded in the bone region at the apex of the ulnar stem (0.001967 MPa). The results of the analysis for the working configurations at 0° and 145° showed significant reductions in the stress states for both prosthetic components; similarly, varying the positioning of the ulnar component at 90° (- 3° in the sagittal plane, 0° in the frontal plane) resulted in better working conditions with a greater resulting developed force and a lower stress peak in the ulnar cement. Conclusion: The areas of greatest stress occur in specific regions of the ulnar and humeral components at the bone-cement-prosthesis interface. The heaviest configuration in terms of stresses was when the elbow was flexed at 90°. Variations in the positioning in the sagittal plane can mechanically affect the movement, possibly resulting in longer survival of the implant.
Biomechanical evaluation of novel intra- and extramedullary assembly fixation for proximal humerus fractures in the elderly

Zhengguo Zhu,Zuhao Chang,Wei Zhang,Hongzhe Qi,Hao Guo,JiaQi Li,Lin Qi,Shaobo Nie,Peifu Tang,Yonghui Liang,Xing Wei,Hua Chen

DOI: https://doi.org/10.3389/fbioe.2023.1182422

IF: 5.7

2023-10-23

Frontiers in Bioengineering and Biotechnology

Abstract:Purpose: A novel intra- and extramedullary assembly fixation method was introduced, which achieved good clinical results in complex proximal humeral fractures; however, evidence of its comparability with traditional fixation is lacking. This biomechanical study aimed to compare it with traditional fixation devices in osteoporotic proximal humeral fractures. Methods: Three-part proximal humeral fractures with osteopenia were created on 12 pairs of fresh frozen humerus specimens and allocated to three groups: 1) lateral locking plate, 2) intramedullary nail, and 3) intra- and extramedullary assembly fixation. The specimens were loaded to simulate the force at 25° abduction. Thereafter, an axial stiffness test and a compound cyclic load to failure test were applied. Structural stiffness, number of cycles loaded to failure, and relative displacement values at predetermined measurement points were recorded using a testing machine and a synchronized 3D video tracking system. Results: In terms of initial stiffness and the number of cycles loaded to failure, the intra- and extramedullary assembly fixation group showed notable improvements compared to the other groups ( p <0.017). The mean relative displacement value of measurement points in the intra- and extramedullary assembly fixation group was smaller than that in the other two groups. However, there was no significant difference until 10,000 cycles. The mean relative displacement of the intramedullary nail group (3.136 mm) exceeded 3 mm at 7,500 cycles of loading. Conclusion: In this test model, axial fixation can provide better mechanical stability than non-axial fixation. The intra- and extramedullary assembly fixation is better able to prevent the varus collapse for elderly proximal humeral fractures with posteromedial comminution.

multidisciplinary sciences
Achieving ligament stability and correct rotational alignment of the femur in knee arthroplasty: a study using the Medial Pivot knee

David Shakespeare,Vera Kinzel,Michael Ledger

DOI: https://doi.org/10.1016/j.knee.2005.03.002

Abstract:In a series of 90 Medial Pivot arthroplasties rotational alignment of the femur was achieved by provisionally reconstructing the lateral side of the joint and tensioning the medial side with feeler gauges. Axial CT scans were employed to measure the rotational alignment relative to surgical epicondylar axis. In valgus knees the cutting block was externally rotated to adjust for posterolateral bone loss. The mean rotational alignment of the femur was 0.6 degrees of external rotation (S.D. 1.3, range 3 degrees of ER to 4 degrees of IR). The mean laxity of the medial ligament was 1 mm in flexion (SD 1, range 0-5 mm) and 0.5 mm in flexion (S.D. 0.5, range 0-2 mm) In those knees in which the medial ligament had been released the CT alignment was perfect, but when internally rotated against the hip 3-4 mm of gapping was noted. In valgus knees the mean rotation of the femoral component was 0.8 degrees of internal rotation (S.D. 1.5, range 1 degrees of IR to 4 degrees of ER). In spite of externally rotating the cutting block there was still a tendency to internally rotate the femur in some knees. This simple technique achieves the two goals of ligament stability and correct rotational alignment in a high proportion of cases. It may be applicable to any instrument system which employs posterior referencing.
Anatomic Repair of a Lateral Collateral Ligament and Anterolateral Capsular Complex Injury With Internal Brace Augmentation

Kyle Schoell,Aryan Haratian,Amir Fathi,Ioanna K. Bolia,Laith K. Hasan,Frank A. Petrigliano,Alexander E. Weber,George F. “Rick“ Hatch

DOI: https://doi.org/10.1177/26350254221093082

2022-07-01

Video Journal of Sports Medicine

Abstract:Background: Lateral collateral ligament (LCL) injuries are implicated in varus instability of the knee. Often, these accompany other ligamentous injuries including anterior cruciate ligament (ACL), posterior cruciate ligament (PCL) tears, and injury to the anterolateral capsular complex (ALCC). Use of internal brace augmentation with anatomic repair is an alternative to reconstruction to improve patient outcomes and facilitate early range of motion and weight bearing. Indications: We present a case of an anatomic repair of a LCL and an ALCC injury with internal brace augmentation. Technique Description: A curvilinear incision centered over the lateral epicondyle is used. The avulsed LCL and biceps tendon was exposed and a placed #5 FiberWire was placed into the distal LCL, biceps tendon, and the popliteofibular ligament. A split was made in the iliotibial (IT) band and a second #5 FiberWire was placed proximally in the LCL/biceps tendon for additional fixation. A tunnel was made in the fibular head and tibia using a 2.4-mm beath pin and the two #5 FiberWires were passed to the anteromedial tibia. The FiberWires were fixed to the tibia using a 14-mm attachable button system (ABS) manhole cover for suspensory fixation. Repair and internal bracing of the anterolateral capsular complex was accomplished with 2 interlocked TightRopes and a #2 FiberTape. This fixation method achieved repair by compressing the anterolateral capsular complex onto its tibial origin. The suture devices also served to augment the repair and were fixed proximally to the femur using another 14-mm ABS manhole cover. The FiberTape was fixed to the anterolateral tibia distally with a 4.5 mm SwiveLock. The TightRopes were passed through a tunnel to the anterolateral tibia and secured using an ABS Dog Bone. The construct was tensioned in near full extension and gapping was matched fluoroscopically to the contralateral knee. Results: Patient was cleared for full return to sports 9 months postoperatively. At the final follow up visit, the patient had excellent strength, stability, and 135° range of motion on the operative knee. Patient had returned to exercise at home but was unable to return to sports due to COVID-19 restrictions. Conclusion: Anatomic repair of the LCL and the ALCC with internal brace augmentation can serve as an effective alternative to reconstruction and demonstrates excellent patient outcomes regarding restoring stability, ROM, and return to preoperative sports.

[Regulation of the NAD specific isocitrate dehydrogenase activity of potato tubercle mitochondria].

[Acute transverse myelitis after allogeneic bone marrow transplantation for acute lymphoblastic leukemia--a case report].

Stabilizing effect of an elbow orthosis with an adjustable hinge axis after lateral collateral ligament injury: A biomechanical study

A Novel Hemiarthroplasty Design for Treatment of Post-traumatic Elbow Ankylosis and Distal Humerus Nonunion: A Case Report

Effect of Elbow Position on Load to Failure in Olecranon Fracture Fixation: A Biomechanical Cadaveric Study

Biomechanical Evaluation of a Low-Invasive Elbow Medial Collateral Ligament Reconstruction Technique With Fascia and Tendon Patches

[Selection of a graft for plastic surgery of defects in the soft tissues of the foot].

Quantum efficiency model for the CCD flash gate

Traumatic valgus instability of the elbow: pathoanatomy and results of direct repair

Traumatic valgus instability of the elbow: pathoanatomy and results of direct repair. Surgical technique

Weak Points of Double-Plate Stabilization Used in the Treatment of Distal Humerus Fracture through Finite Element Analysis

Coupling of downhill ion movements in human red cells in the absence of external potassium.

Scapholunate Ligament Reconstruction With Internal Brace Augmentation Techniques for Chronic Scapholunate Dissociation: A Clinical Follow-up Study

Ulnohumeral Cross-Pinning in the Management of Traumatic Elbow Instability

Cemented vs. Press-Fit Humeral Stems: A Matched Cohort Analysis at a Mean Follow-Up of 10 years

A Comparative Biomechanical Study of Alternative Medial Collateral Ligament Reconstruction Techniques

[Technical modifications to elbow interposition arthroplasty]

Study of a constrained finite element elbow prosthesis: the influence of the implant placement

Biomechanical evaluation of novel intra- and extramedullary assembly fixation for proximal humerus fractures in the elderly

Achieving ligament stability and correct rotational alignment of the femur in knee arthroplasty: a study using the Medial Pivot knee

Anatomic Repair of a Lateral Collateral Ligament and Anterolateral Capsular Complex Injury With Internal Brace Augmentation