Abstract:Masonry was the most used material during the last centuries to build constructions. Most of the existing masonry structures (buildings, bridges, etc.) were built without considering some important structural considerations that are important nowadays. Moreover, due to factors such as the increasing of service loads, materials aging, structural damage, etc., the existing masonry structures require strengthening interventions. The definition of optimal strengthening strategies using traditional and innovative materials is still an important issue of the scientific research. In fact, during the last decade, many researchers focused their attention studying innovative composites materials, such as fiber-reinforced polymers and fiber-reinforced cementitious matrix composites, for the strengthening of existing masonry structures. This research has focused on aspects such as the bond behavior between the substrate and the composite materials, the structural behavior of the strengthened masonry and concrete structures, and the compatibility and reversibility of these materials when bonded to existing substrates. In this study, the bond behavior of a composite material known as steel fiber-reinforced mortar (SFRM), recently used as for the strengthening of existing structures, applied onto masonry structures is analyzed experimentally and numerically. First, the material is characterized experimentally with the aim of getting insight on its behavior and applicability when applied as an innovative technique for the strengthening of masonry and to obtain mechanical parameters required for the numerical models. Mechanical properties of the SFRM studied included flexural and compressive strength, tensile strength, and residual flexural strength. The SFRM bond behavior on masonry substrates was evaluated by means of double shear lap tests. In addition, the experimental tensile and bond behavior of the SFRM is studied numerically through finite-element models validated using the results obtained during the experimental tests. Results show that if an adequate bonded length is provided, the SFRM can fully develop its tensile strength as detachment from the substrate is not observed.

[Early results of leg bone lengthening using epiphysis-metaphysis distraction].

Masonry elements strengthened through Textile-Reinforced Mortar: application of detailed level modelling with a free open-source Finite-Element code

Dynamic Progressive Collapse Response of Multi-Storey Frame Structures with Masonry Infills

Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: out-of-plane cyclic loading

Numerical study of composite material (FRP/TRC)-reinforced masonry walls under in-plane loading

Quasi-static, Cyclic Loading Tests of RAC Brick Masonry Walls Strengthened by Basalt Textile Reinforced Concrete

Compressive Behavior of Concrete Jacketed in Basalt TRM Shell: Experiments and Predictions

Ductile Concrete Columns Enabled by Multilayer Basalt TRM Shells: Confinement Mechanism and Modeling

Seismic strengthening of clay block masonry buildings with composites: an experimental study of a full scale three-storey building model

3D hybrid modelling approach combining the finite and discrete element methods: Validation based on masonry shear wall tests

Integrated Seismic and Energy Retrofitting System for Masonry Walls Using Textile-Reinforced Mortars Combined with Thermal Insulation: Experimental, Analytical, and Numerical Study

Modelling of the Dynamic Response of a Full-Scale Masonry Groin Vault: Unstrengthened and Strengthened with Textile-Reinforced Mortar (TRM)

Numerical and Experimental Investigation on Cyclic Behavior of Masonry Infill Walls Retrofitted with CFRP

Comparative numerical study to simulate masonry with bed joint reinforced repointing

Modelling reinforced masonry buildings by a mechanics‐based macroelement approach

Out-of-plane strengthening of URM walls using different fiber-reinforced materials

Out-of-plane performance of structurally and energy retrofitted masonry walls: geopolymer versus cement-based textile-reinforced mortar combined with thermal insulation

A robust computational strategy for failure prediction of masonry structures using an improved multi‐surface damage‐plastic based interface model

Seismic Performance of Unreinforced Masonry Walls with Various Retrofitting Methods

Bond behavior of steel fiber-reinforced mortar (SFRM) applied onto masonry substrate

Combined Strengthening Techniques to Improve the Out-of-Plane Performance of Masonry Walls