OFE - Optical nonlinear processmig

S. Nakamura,Japan.

DOI: https://doi.org/10.1109/ofc.2005.193091

Abstract:Optical-frequency mixing can accomplish a variety of wavelength-and time-domain all-optical signal processing functions. Operation at speeds up to 160 Gb/s, bandwidths of 70 nm, and with as few as 400photon pulses have been demonstrated in periodicdly-poled lithium niobate (PPLN) devices. 02005 Optical Society of America OCIS Codes: (060.2330) Fiber optics communications; 190.4390 Nonlinear optics, integrated optics; (1 30.3730) Lithium niobate Highly nonlinear waveguides can be used to implement a variety of signal processing functions in the time and fkequency domains, Of the many approaches to implementing such devices, three-wave mixing and cascaded threewave mixing, while not the most frequently exploited, offer an attractive combination of low insertion loss, IOW pump power, high speed, wide bandwidth, low additive noise and flexible configuration [ 11. Applications of these optical frequency mixers, such as a 160 Gb/s MUX in an OTDM transmission system, a 100-fJ-pulse-energy nonlinear discriminator for O-CDMA, a gated mixer for picosecond-resolution optical sampling, and a multichannel wavelength converter used in processing functions such as time slot interchange, optical label swapping, and header recognition have all been implemented in this fashion. In this paper, basic concepts of optical frequency mixers based on the quadratic nonlinear response ,$*I, their implementation in periodically-poled lithium niobate (PPLN) waveguides, examples of applications of these devices, and more advanced design concepts including balanced mixers and quasi-group velocity matching will be described. In a difference frequency mixer, inputs at frequencies q, and w, generate an output at frequency o,,, = q, -U,. The output power Po,,, of such a mixer is related to the pump power Pp and the signal power P, by Po,, = 17 Pp P,, where dW'] is the nonlinear efficiency, proportional to the square of the length of the device and to the overlap of the pump, signal, and output modes. The best devices operating around 1.5 pm wavelengths today have normalized efficiencies in the range of 0.5 1 W'-cm*', so that in 6-cm-long devices efficiencies greater than 30 W ' are obtained. Note that for a fixed pump power of about 11 am, ideally such a device has an output linear in the signal power, with conversion loss of 3 dB. For communications applications, operation is typically near degeneracy, i.e. the signal and output wavelengths are in the 1 S-pm band, and the pump is around 0.75 pm. For an input w, = d 2 + A, the output is qJ2 A, that is the output spectrum is the input spectrum mirrored around half the pump frequency, Fig. I(a). The output electric field E,, is proportional to the complex conjugate of the signal field, El*, so the device also operates as a phase conjugator or spectral inverter. -