Abstract:A new facility for microdiffraction strain measurements and microfluorescence mapping has been built on beamline 12.3.2 at the advanced light source of the Lawrence Berkeley National Laboratory. This beamline benefits from the hard x-radiation generated by a 6 T superconducting bending magnet (superbend). This provides a hard x-ray spectrum from 5 to 22 keV and a flux within a 1 microm spot of approximately 5x10(9) photons/s (0.1% bandwidth at 8 keV). The radiation is relayed from the superbend source to a focus in the experimental hutch by a toroidal mirror. The focus spot is tailored by two pairs of adjustable slits, which serve as secondary source point. Inside the lead hutch, a pair of Kirkpatrick-Baez (KB) mirrors placed in a vacuum tank refocuses the secondary slit source onto the sample position. A new KB-bending mechanism with active temperature stabilization allows for more reproducible and stable mirror bending and thus mirror focusing. Focus spots around 1 microm are routinely achieved and allow a variety of experiments, which have in common the need of spatial resolution. The effective spatial resolution (approximately 0.2 microm) is limited by a convolution of beam size, scan-stage resolution, and stage stability. A four-bounce monochromator consisting of two channel-cut Si(111) crystals placed between the secondary source and KB-mirrors allows for easy changes between white-beam and monochromatic experiments while maintaining a fixed beam position. High resolution stage scans are performed while recording a fluorescence emission signal or an x-ray diffraction signal coming from either a monochromatic or a white focused beam. The former allows for elemental mapping, whereas the latter is used to produce two-dimensional maps of crystal-phases, -orientation, -texture, and -strain/stress. Typically achieved strain resolution is in the order of 5x10(-5) strain units. Accurate sample positioning in the x-ray focus spot is achieved with a commercial laser-triangulation unit. A Si-drift detector serves as a high-energy-resolution (approximately 150 eV full width at half maximum) fluorescence detector. Fluorescence scans can be collected in continuous scan mode with up to 300 pixels/s scan speed. A charge coupled device area detector is utilized as diffraction detector. Diffraction can be performed in reflecting or transmitting geometry. Diffraction data are processed using XMAS, an in-house written software package for Laue and monochromatic microdiffraction analysis.

BL09XU: an advanced hard X-ray photoelectron spectroscopy beamline of SPring-8

Development of hard x-ray photoelectron SPLEED-based spectrometer applicable for probing of buried magnetic layer valence states

Soft X-ray ARPES for three-dimensional crystals in the micrometre region

Design of an Ultrahigh-Energy-Resolution and Wide-Energy-Range Soft X-Ray Beamline

[SPring-8 structural biology beamline]

New developments in high-pressure X-ray diffraction beamline for diamond anvil cell at SPring-8

Development of a laboratory system hard X-ray photoelectron spectroscopy and its applications

Development of soft x-ray time-resolved photoemission spectroscopy system with a two-dimensional angle-resolved time-of-flight analyzer at SPring-8 BL07LSU

Time‐resolved AUSAXS at BL28XU at SPring‐8

Angle‐resolved X‐ray emission spectroscopy facility realized by an innovative spectrometer rotation mechanism at SPring‐8 BL07LSU

High‐throughput and high‐resolution powder X‐ray diffractometer consisting of six sets of 2D CdTe detectors with variable sample‐to‐detector distance and innovative automation system

Beamline Spectroscopy of Integrated Circuits With Hard X-ray Transition Edge Sensors at the Advanced Photon Source

The Xafs Beamline of Ssrf

Beyond hard x-ray photoelectron spectroscopy: Simultaneous combination with x-ray diffraction

Spatial- and Spin-Resolution ARPES and Magnetism Beamline at SSRF

Materials Science Research by Ambient Pressure X-Ray Photoelectron Spectroscopy Systems at Synchrotron Radiation Facilities in Japan: Applications in Energy, Catalysis, and Sensors

Commissioning of a new beamline and station for ARPES at NSRL

A new experimental station for microbeam X‐ray scattering at the SSRF BL10U1 beamline

A Dedicated Superbend X-Ray Microdiffraction Beamline for Materials, Geo-, and Environmental Sciences at the Advanced Light Source

Solution phase high repetition rate laser pump x-ray probe picosecond hard x-ray spectroscopy at the Stanford Synchrotron Radiation Lightsource

FlexPES: a versatile soft X-ray beamline at MAX IV Laboratory