Dietary fibre in pineapple fruit.

A. P. Bartolome,P. Rupérez

1995-10-01

European Journal of Clinical Nutrition

Abstract:

What problem does this paper attempt to address?

Platinum-Cobalt Nanowires for Efficient Alcohol Oxidation Electrocatalysis

Wenwen Wang,Xinyi Bai,Xiaochu Yuan,Yumin Liu,Lin Yang,Fangfang Chang

DOI: https://doi.org/10.3390/ma16020840

IF: 3.4

2023-01-16

Materials

Abstract:The compositions and surface facets of platinum (Pt)-based electrocatalysts are of great significance for the development of direct alcohol fuel cells (DAFCs). We reported an approach for preparing ultrathin PtnCo100−n nanowire (NW) catalysts with high activity. The PtnCo100−n NW alloy catalysts synthesized by single-phase surfactant-free synthesis have adjustable compositions and (111) plane and strain lattices. X-ray diffraction (XRD) results indicate that the alloy composition can adjust the lattice shrinkage or expansion of PtnCo100−n NWs. X-ray photoelectron spectroscopy (XPS) results show that the electron structure of Pt is changed by the alloying effect caused by electron modulation in the d band, and the chemical adsorption strength of Pt is decreased, thus the catalytic activity of Pt is increased. The experimental results show that the activity of PtnCo100−n for the oxidation of methanol and ethanol is related to the exposed crystal surface, strain lattice and composition of catalysts. The PtnCo100−n NWs exhibit stronger electrocatalytic performance for both methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR). The dominant (111) plane Pt53Co47 exhibits the highest electrocatalytic activity in MOR, which is supported by the results of XPS. This discovery provides a new pathway to design high activity, stability nanocatalysts to enhance direct alcohol fuel cells.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Regulating the Alloying Degree and Electronic Structure of Pt–Au Nanoparticles for High-Efficiency Direct C2+ Alcohol Fuel Cells

Minghang Jiang,Yi Hu,Wenjun Zhang,Lei Wang,Songyuan Yang,Junchuan Liang,Zewen Zhang,Xiaoli Zhang,Zhong Jin

DOI: https://doi.org/10.1021/acs.chemmater.1c00886

IF: 10.508

2021-01-01

Chemistry of Materials

Abstract:Direct alcohol fuel cells represent a promising green and sustainable route for chemical to electrical energy conversion; however, designing highly efficient electrocatalysts for the electro-oxidation of C2+ alcohol molecules is an ongoing challenge. Herein, we report a convenient room-temperature reduction method to fabricate a series of Pt-Au alloy catalysts with controllably tailored alloying degrees and particle diameters (4.6-7.9 nm) for enhancing the electro-oxidation capability toward C2+ alcohols. Benefiting from the strong electron interactions between Pt and Au, the electronic state and size of the alloy nanoparticles can be effectively optimized, alleviating the CO poisoning and aggregation problem of the catalytic species. As a result, the Pt45Au55 alloy nanoparticles grown in situ on carbon nanotubes (Pt45Au55/CNTs) show an enhanced C-C bond cleavage ability, as confirmed by a quantitative analysis of the final C-2 oxidation products as well as by comparing the oxidation activity in different C-1-C-3 alcohols and other high-energy-density molecules. The Pt45Au55/CNTs catalyst exhibits excellent catalytic activity (1746 mA.mg(Pt)(-1)), high CO tolerance, and good stability for the ethanol oxidation reaction (EOR) in an acidic medium. Moreover, the Pt38Au62/CNTs catalyst displays dramatically enhanced ethanol oxidation activity (13 993 mA.mg(Pt+Au)(-1)) in an alkaline medium. The proposed rational design of Pt-Au alloy catalysts with controllable alloying degrees and particle sizes provides a feasible strategy for boosting the overall performance of Pt-based electrocatalysts for the direct C2+ alcohol fuel cells.
Trimetallic PtSnRh Wavy Nanowires As Efficient Nanoelectrocatalysts for Alcohol Electrooxidation.

Kezhu Jiang,Lingzheng Bu,Pengtang Wang,Shaojun Guo,Xiaoqing Huang

DOI: https://doi.org/10.1021/acsami.5b04391

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:The design and creation of efficient catalysts for alcohol oxidation reaction has attracted great research attention because alcohols are promising fuels for direct fuel cell reactions because of their high energy density, easy storage, and transportation. We herein report an efficient strategy that allows the preparation of ternary PtSnM (M=Co, Ni, and Rh) wavy nanowires (WNWs) with ultrathin diameter of only around 2 nm and tunable compositions in high yield. Detailed catalytic studies show that all the ternary WNWs exhibit high performance for ethanol oxidation reaction (EOR) and methanol oxidation reaction (MOR), and their performance shows interesting composition-dependent electrocatalytic activity with PtSnRh WNWs having the best activity for both EOR and MOR. The PtSnRh WNWs are also more stable than commercial Pt/C catalyst, as revealed by long-time chronoamperometric (CA) measurements. The present work highlights the use of multimetallic WNWs as highly active and durable nanocatalysts in enhancing alcohol electrooxidation, which will open a new way in tuning 1D multimetallic nanostructures for boosting other fuel cell reactions, various heterogeneous reactions, and beyond.
Modulating Electronic Structure of an Au‐Nanorod‐Core–PdPt‐Alloy‐Shell Catalyst for Efficient Alcohol Electro‐Oxidation

Xiaobo Yang,Qiang Wang,Shaojun Qing,Zhe Gao,Xili Tong,Nianjun Yang

DOI: https://doi.org/10.1002/aenm.202100812

IF: 27.8

2021-05-19

Advanced Energy Materials

Abstract:Direct alcohol fuel cells (DAFCs) utilize alcohol electro-oxidation reactions (AORs) to provide electricity, where catalysts with optimal electronic structures are required to accelerate sluggish AORs. Herein, an electrocatalyst with an Au-nanorod core and a PdPt-alloy shell is designed. Its electronic structures are modulated through epitaxial growth of a PdPt-alloy shell on the Au-nanorod core, which exhibits a tensional strain effect and atomic steps. Three key problems of AORs are solved with this catalyst, including poor adsorption of alcohols on the catalyst, CO poisoning of the catalyst, and a high free energy barrier for the AORs. Taking methanol electro-oxidation reaction (MOR) as an example, this catalyst shows 9.4 times higher mass activity than the market-available Pt/C catalyst. Theoretic simulations prove that this catalyst has a low free energy barrier for the MOR, and strong adsorption of methanol but weaker adsorption of carbonaceous intermediates. The reasons behind this are the stretched geometric structure of the PdPt (100)-alloy shell and the optimized electronic structure of catalytic sites on the catalyst surface. Meanwhile, efficient electro-oxidation of ethanol, ethylene glycol, and glycerol is realized. This work paves the way to design and synthesize universal and efficient AOR catalysts for the construction of high-performance DAFCs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Highly active zigzag-like Pt-Zn alloy nanowires with high-index facets for alcohol electrooxidation

Yanchao Xu,Xiaoqiang Cui,Shuting Wei,Qinghua Zhang,Lin Gu,Fanqi Meng,Jinchang Fan,Weitao Zheng

DOI: https://doi.org/10.1007/s12274-019-2374-z

IF: 9.9

2019-01-01

Nano Research

Abstract:The development of highly efficient Pt-based alloy nanocatalysts is important but remains challenging for fuel cells commercialization. Here, a new class of zigzag-like platinum-zinc (Pt-Zn) alloy nanowires (NWs) with rough surface and controllable composition is reported. The merits of anisotropic one-dimensional nanostructure, stable high-index facets and coordinatively unsaturated Pt sites endow the composition-optimal Pt 94 Zn 6 NWs with a mass activity of 7.2 and 6.2 times higher than that of commercial Pt black catalysts toward methanol/ethanol oxidation, respectively. Alloying-induced d -band electron modulation and lattice strain effects weaken the adsorption strength of poisoning species, which originally enhances the catalytic activity of Pt-Zn NWs. This study provides a new perspective of Pt-Zn electrocatalysts with intrinsic mechanism for enhanced catalytic performance.
One-stone, two birds: Alloying effect and surface defects induced by Pt on Cu2−xSe nanowires to boost C-C bond cleavage for electrocatalytic ethanol oxidation

Hongcheng Peng,Jun Ren,Yuchao Wang,Yu Xiong,Qichen Wang,Qian Li,Xin Zhao,Longsheng Zhan,Lirong Zheng,Yougen Tang,Yongpeng Lei

DOI: https://doi.org/10.1016/j.nanoen.2021.106307

IF: 17.6

2021-10-01

Nano Energy

Abstract:The high-efficient C-C bond cleavage is the key for ethanol electrooxidation. In this work, PtCu/Cu2−xSe nanowires (NWs) with abundant surface defects were constructed and exhibited remarkable activity of 5.03 A mg−1Pt as well as 5.29 A mg−1Pt for ethanol oxidation and methanol oxidation, respectively, which are 5.0 and 5.3 fold of commercial Pt/C. ex situ, in situ experiments and calculation results reveal that the formation of PtCu alloys lowered the d-band level to promote the adsorption of hydroxyl species. The abundant defects created high density of low-coordinated atoms to boost the reaction kinetics. Thus, PtCu/Cu2−xSe NWs displayed enhanced C-C bond cleavage ability and high selectivity for C1 products (CO2). The assembled direct ethanol fuel cells (DEFCs) with PtCu/Cu2−xSe NWs as anode provided an open-circuit voltage (OCV) of 0.773 V and a peak power density of 7.8 mW cm−2. This work not only give us a potential catalyst for C-C bond cleavage, but also provides an effective strategy to enhance the electrocatalytic activity of ethanol/methanol oxidation.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Ultrathin PtNiM (M = Rh, Os, and Ir) Nanowires as Efficient Fuel Oxidation Electrocatalytic Materials.

Weiyu Zhang,Yong Yang,Bolong Huang,Fan Lv,Kai Wang,Na Li,Mingchuan Luo,Yuguang Chao,Yingjie Li,Yingjun Sun,Zhikun Xu,Yingnan Qin,Wenxiu Yang,Jinhui Zhou,Yaping Du,Dong Su,Shaojun Guo

DOI: https://doi.org/10.1002/adma.201805833

IF: 29.4

2019-01-01

Advanced Materials

Abstract:The development of new electrocatalysts with high activity and durability for alcohol oxidation is an emerging need of direct alcohol fuel cells. However, the commonly used Pt-based catalysts still exhibit drawbacks including limited catalytic activity, high overpotential, and severe CO poisoning. Here a general approach is reported for preparing ultrathin PtNiM (M = Rh, Os, and Ir) nanowires (NWs) with excellent anti-CO-poisoning ability and high activity. Owing to their superior nanostructure and optimal electronic interaction, the ultrathin PtNiM NWs show enhanced electrocatalytic performance for both methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR). The optimal PtNiRh NWs show mass activity of 1.72 A mg(-1) and specific activity of 2.49 mA cm(-2) for MOR, which are 3.17 and 2.79 times higher than those of Pt/C. In particular, the onset potentials of PtNiRh NWs for MOR and EOR shift down by about 65 and 85 mV compared with those of Pt/C. Density functional theory calculations further verify their high antipoison properties for MOR and EOR from both an electronic and energetic perspective. Facilitated by the introduction of Rh and Ni, the stable pinning of the Pt 5d band associated with electron-rich and depletion centers solves the dilemma between reactivity and anti-CO poisoning.
Sub-Monolayer YOx /moox on Ultrathin Pt Nanowires Boosts Alcohol Oxidation Electrocatalysis.

Menggang Li,Zhonglong Zhao,Weiyu Zhang,Mingchuan Luo,Lu Tao,Yingjun Sun,Zhonghong Xia,Yuguang Chao,Kun Yin,Qinghua Zhang,Lin Gu,Weiwei Yang,Yongsheng Yu,Gang Lu,Shaojun Guo

DOI: https://doi.org/10.1002/adma.202103762

IF: 29.4

2021-01-01

Advanced Materials

Abstract:A crucial issue restricting the application of direct alcohol fuel cells (DAFCs) is the low activity of Pt-based electrocatalysts for alcohol oxidation reaction caused by the reaction intermediate (CO*) poisoning. Herein, a new strategy is demonstrated for making a class of sub-monolayer YOx/MoOx-surface co-decorated ultrathin platinum nanowires (YOx/MoOx-Pt NWs) to effectively eliminate the CO poisoning for enhancing methanol oxidation electrocatalysis. By adjusting the amounts of YOx and MoOx decorated on the surface of ultrathin Pt NWs, the optimized 22% YOx/MoOx-Pt NWs achieve a high specific activity of 3.35 mA cm(-2) and a mass activity of 2.10 A mg(Pt)(-1), as well as the enhanced stability. In situ Fourier transform infrared (FTIR) spectroscopy and CO stripping studies confirm the contribution of YOx and MoOx to anti-CO poisoning ability of the NWs. Density functional theory (DFT) calculations further reveal that the surface Y and Mo atoms with oxidation states allow COOH* to bind the surface through both the carbon and oxygen atoms, which can lower the free energy barriers for the oxidation of CO* into COOH*. The optimal NWs also show the superior activities toward the electro-oxidation of ethanol, ethylene glycol, and glycerol.
Hierarchical Pt/PtxPb Core/Shell Nanowires As Efficient Catalysts for Electrooxidation of Liquid Fuels

Nan Zhang,Shaojun Guo,Xing Zhu,Jun Guo,Xiaoqing Huang

DOI: https://doi.org/10.1021/acs.chemmater.6b01642

IF: 10.508

2016-01-01

Chemistry of Materials

Abstract:The development of highly efficient fuel cell devices is largely impeded by the limited electrocatalytic activity and stability of available Pt-based electrocatalysts. Herein, we report a facile one-pot strategy for the controlled synthesis of hierarchical Pt/PtxPb core/shell nanowires (NWs) with dendritic morphology. Different from the reported NWs, the present hierarchical core/shell NWs show the integrated features of one-dimensional (1D) structure, core/shell structure, alloy effect, and high surface area. These important characteristics enable them to be much more active and stable for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) than Pt NWs, the Pt-Pb nanoparticles (NPs), and commercial Pt/C (20 wt %, Pt particle size: 2-5 nm, Johnson Matthey) catalyst. Particularly, the present PtPb0.27 NWs are very stable in the MOR and EOR conditions with much lower activity decay after 1000 potential cycles than those of Pt-Pb NPs and the commercial Pt/C. This work highlights the importance of the precise control over 3D hierarchical structure in enhancing electrocatalysis for liquid fuel oxidations.
High-Density Surface Protuberances Endow Ternary Ptfesn Nanowires With High Catalytic Performance For Efficient Alcohol Electro-Oxidation

Cheng Wang,Hui Xu,Fei Gao,Yangping Zhang,Tongxin Song,Caiqin Wang,Hongyuan Shang,Xing Zhu,Yukou Du

DOI: https://doi.org/10.1039/c9nr06343a

IF: 6.7

2019-01-01

Nanoscale

Abstract:Developing cost-effective catalysts with superb activity and stability to alcohol electro-oxidation is a decisive factor towards the progress of direct alcohol fuel cells (DAFCs). Rationally utilizing the architectural and surface microstructural sensitivity of nanocatalysts can significantly increase their electrocatalytic properties. Here, we report an appropriate route that allows the fabrication of ultrafine PtFeSn nanowires (NWs) with tunable compositions. Interestingly, the addition of Sn reconstructed the surface microstructures, making ultrafine 1D NWs rich in a large number of surface protuberances, which may facilitate the oxidation of ethanol and methanol. Impressively, further catalytic studies demonstrate that all the PtFeSn NWs exhibit excellent catalytic capabilities for ethanol oxidation reaction (EOR) and methanol oxidation reaction (MOR), and display composition-related electrocatalytic activity with Pt1Fe0.20Sn0.46 NWs, possessing the highest activity for EOR and MOR. In addition, the trimetallic PtFeSn NWs exhibit significant meliorative durability relative to PtFe NWs and commercial Pt/C. The superb electrocatalytic performance is ascribed to its one-dimensional (1D) structure, atomic-level fine diameter, synergistic effect among Pt, Fe, and Sn components and abundant protuberances on the surface. Thus, this study highlights the significance of accurate structure- and surface-controlled Pt-based NWs for electrocatalysis and provides a universal approach for designing multi-component catalysts.
Strain-Induced Porous Pd@PdPt Core/Shell Nanocubes as Effective All-in-One Electrocatalysts toward Multialcohol Oxidation

Jinwu Hu,Ran Li,Xin Wang,Shaozhen Wang,Caihong Fang

DOI: https://doi.org/10.1021/acsanm.3c00969

IF: 6.14

2023-06-05

ACS Applied Nano Materials

Abstract:Constructing an appealing architecture is of great significance to improving the electrocatalytic activity and stability of Pt-based nanocatalysts. In this work, we successfully synthesized porous Pd@PdPt core/shell nanocrystals via a facile one-pot method, which possess several architectural and compositional advantages, involving porous outer, ultrathin branches, an open mesoporous skeleton, a core/shell structure, and an alloyed composition. These morphological features and the synergistic effect between different components in the alloy endow the Pd@PdPt nanostructures with abundant active sites, effective mass transfer, strain in the particle, and the electronic coupling effect. The Pd@PdPt nanoalloy therefore exhibits excellent electrocatalytic performances in alcohol oxidation reactions. Impressively, the Pd5Pt4 nanocubes exhibit a higher mass/specific activity of 3.225 A mgPt+Pd –1/34.49 A m–2 for the ethanol oxidation reaction, which is even 4.00-/2.39-fold as high as that of commercial Pt/C. Moreover, the Pd5Pt4 nanocubes also show a superior mass activity of 2.824 A mgPt+Pd –1/37.66 A m–2 toward the methanol oxidation reaction, which is up to 4.20/2.40 times that of the commercial Pt/C. The Pd@PdPt also has enhanced electrocatalytic stability. More importantly, the porous Pt5Pd4 nanocubes still demonstrate superior electrocatalytic activities of 0.259, 1.19, 2.65, and 2.76 A mgPt+Pd –1 for the oxidation of glucose, isopropyl alcohol, glycerol, and ethylene glycol, respectively. We therefore believe that these universal electrocatalysts have the potential to promote practical applications in fuel cells.

materials science, multidisciplinary,nanoscience & nanotechnology
Preparation of Au@Pd Core–Shell Nanorods with fcc -2H- fcc Heterophase for Highly Efficient Electrocatalytic Alcohol Oxidation

Xichen Zhou,Yangbo Ma,Yiyao Ge,Shangqian Zhu,Yu Cui,Bo Chen,Lingwen Liao,Qinbai Yun,Zhen He,Huiwu Long,Lujiang Li,Biao Huang,Qinxin Luo,Li Zhai,Xixi Wang,Licheng Bai,Gang Wang,Zhiqiang Guan,Ye Chen,Chun-Sing Lee,Jinlan Wang,Chongyi Ling,Minhua Shao,Zhanxi Fan,Hua Zhang

DOI: https://doi.org/10.1021/jacs.1c11313

IF: 15

2021-12-21

Journal of the American Chemical Society

Abstract:Controlled construction of bimetallic nanostructures with a well-defined heterophase is of great significance for developing highly efficient nanocatalysts and investigating the structure-dependent catalytic performance. Here, a wet-chemical synthesis method is used to prepare Au@Pd core-shell nanorods with a unique fcc-2H-fcc heterophase (fcc: face-centered cubic; 2H: hexagonal close-packed with a stacking sequence of "AB"). The obtained fcc-2H-fcc heterophase Au@Pd core-shell nanorods exhibit superior electrocatalytic ethanol oxidation performance with a mass activity as high as 6.82 A mgPd-1, which is 2.44, 6.96, and 6.43 times those of 2H-Pd nanoparticles, fcc-Pd nanoparticles, and commercial Pd/C, respectively. The operando infrared reflection absorption spectroscopy reveals a C2 pathway with fast reaction kinetics for the ethanol oxidation on the prepared heterophase Au@Pd nanorods. Our experimental results together with density functional theory calculations indicate that the enhanced performance of heterophase Au@Pd nanorods can be attributed to the unconventional 2H phase, the 2H/fcc phase boundary, and the lattice expansion of the Pd shell. Moreover, the heterophase Au@Pd nanorods can also serve as an efficient catalyst for the electrochemical oxidation of methanol, ethylene glycol, and glycerol. Our work in the area of phase engineering of nanomaterials (PENs) opens the way for developing high-performance electrocatalysts toward future practical applications.

chemistry, multidisciplinary
Shape-control of one-dimensional PtNi nanostructures as efficient electrocatalysts for alcohol electrooxidation.

Fei Gao,Yangping Zhang,Pingping Song,Jin Wang,Bo Yan,Qiwen Sun,Lei Li,Xing Zhu,Yukou Du

DOI: https://doi.org/10.1039/c8nr09892a

IF: 6.7

2019-01-01

Nanoscale

Abstract:Bimetallic one-dimensional (1D) nanostructures such as nanowires (NWs) and nanorods (NRs), serving as high-efficiency anode electrocatalysts, have attracted extensive attention in the past decade. However, the precise design and synthesis of 1D Pt-based nanocrystals with tunable morphology and size still remain an arduous challenge. Driven by this, we report a facile yet efficient strategy for the first time to prepare PtNi ultrafine NWs (UNWs), sinuous NWs (SNWs) and ultrashort NRs (UNRs) by adjusting the amount of citric acid, ascorbic acid and glucose. Detailed analysis of their electrocatalytic properties has indicated that the as-obtained PtNi SNWs exhibit the most outstanding electrocatalytic activity toward ethylene glycol oxidation reaction (EGOR) and glycerol oxidation (GOR), 4.5 and 4.3 times higher in mass activity as well as 4.3 and 3.9 times higher in specific activity compared with the commercial Pt/C catalyst. The as-prepared PtNi SNWs are also more stable than the commercial Pt/C catalyst after successive durability tests. The proposed method provides insight into more rational designs of bimetallic nanocatalysts with 1D architectures and the as-synthesized PtNi catalysts with improved electrocatalytic performance assist in promoting the further development of direct alcohol fuel cells (DAFCs).
Sub‐Monolayer YO x /MoO x on Ultrathin Pt Nanowires Boosts Alcohol Oxidation Electrocatalysis

Menggang Li,Zhonglong Zhao,Weiyu Zhang,Mingchuan Luo,Lu Tao,Yingjun Sun,Zhonghong Xia,Yuguang Chao,Kun Yin,Qinghua Zhang,Lin Gu,Weiwei Yang,Yongsheng Yu,Gang Lu,Shaojun Guo

DOI: https://doi.org/10.1002/adma.202103762

IF: 29.4

2021-08-22

Advanced Materials

Abstract:A crucial issue restricting the application of direct alcohol fuel cells (DAFCs) is the low activity of Pt-based electrocatalysts for alcohol oxidation reaction caused by the reaction intermediate (CO*) poisoning. Herein, a new strategy is demonstrated for making a class of sub-monolayer YOx/MoOx-surface co-decorated ultrathin platinum nanowires (YOx/MoOx–Pt NWs) to effectively eliminate the CO poisoning for enhancing methanol oxidation electrocatalysis. By adjusting the amounts of YOx and MoOx decorated on the surface of ultrathin Pt NWs, the optimized 22% YOx/MoOx–Pt NWs achieve a high specific activity of 3.35 mA cm−2 and a mass activity of 2.10 A mgPt−1, as well as the enhanced stability. In situ Fourier transform infrared (FTIR) spectroscopy and CO stripping studies confirm the contribution of YOx and MoOx to anti-CO poisoning ability of the NWs. Density functional theory (DFT) calculations further reveal that the surface Y and Mo atoms with oxidation states allow COOH* to bind the surface through both the carbon and oxygen atoms, which can lower the free energy barriers for the oxidation of CO* into COOH*. The optimal NWs also show the superior activities toward the electro-oxidation of ethanol, ethylene glycol, and glycerol.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Ultrathin porous PdPtNi nanosheets as efficient electrocatalysts for alcohol oxidation reactions

Lingjun Pei,Shaolei Xie,Hui Guo,Xueqian Li,Huidong Xie,Zuobin Tang,Guanghui Han,Zhonghong Xia,Menggang Li,Hu Liu

DOI: https://doi.org/10.1016/j.cej.2024.149113

IF: 15.1

2024-02-02

Chemical Engineering Journal

Abstract:The development of ultrathin porous nanostructures contributes a new opportunity to optimize the activity and stability of electrocatalysts, especially for those complicated alcohol oxidation reactions (AORs). Herein, a series of porous PdPtNi nanosheets with adjustable compositions were designed and synthesized to achieve highly active and stable electrocatalysis towards methanol and ethanol oxidation reactions (MOR and EOR) in alkaline electrolyte containing the corresponding alcohol molecules. Benefited from the ultrathin structures, abundant step atoms and optimized electronic structures, the optimized Pd 45 Pt 42 Ni 13 /C exhibits the mass and specific activities of 16.2 A mg PGM −1 and 12.7 mA cm −2 , respectively, much higher than those of commercial Pt/C and PdPt-based catalysts. In addition, the Pd 45 Pt 42 Ni 13 /C also displays desirable stability with the highest retained current density after long-term durability tests. We also demonstrate that the porous PdPtNi nanosheets can serve as high-efficiency electrocatalysts towards EOR, confirming the versatility of improved electrocatalytic performance of AORs with multi-electron transfer. By maximizing the number of electrocatalytically active sites and enhancing the intrinsic catalytic activity of single sites, this work provides a class of high-performance Pt-based anodic catalyst for DAFCs via introducing porosity into ultrathin Pt- or Pd-based nanostructures.

engineering, chemical, environmental
Core-shell Au@PtIr nanowires with dendritic alloy shells as efficient bifunctional catalysts toward methanol oxidation and hydrogen evolution reactions

Xiaoqu Wang,Jiuhui Qi,Xinji Luo,Zhongyun Yang,Youjun Fan,Zhe Jiang,Chengzhou Liu,Jun Yang,Wei Chen

DOI: https://doi.org/10.1016/j.ijhydene.2021.08.214

IF: 7.2

2021-10-01

International Journal of Hydrogen Energy

Abstract:Nanocatalysts with combination of unique morphologies and synergistic interactions have a potential to enhance electrocatalytic ability related to the reactions in fuel cells. Here, we show a wet-chemistry-based synthesis of dendritic nanowires (NWs) with core-shell constructions regarding Te NWs as sacrificial templates for methanol oxidation reaction (MOR) and hydrogen evolution reaction (HER). Regarding the synthesis of NWs, Au NWs are firstly obtained through galvanic replacement with Te templates, followed by growth of alloy PtIr shells in subsequent seed-mediated growth. The as-synthesized core-shell nanowires combine the advantage of one-dimensional (1D) dendritic feature that facilitate fast electron transport and provide more interfaces and interstices between catalytic active sites and electrolyte, with the synergistic interactions in alloy shells. Consequently, the as-prepared NWs show good catalytic properties in MOR and HER in terms of higher activity, larger electrochemically active surface areas (ECSAs) and better anti-toxicity than commercial Pt/C.

energy & fuels,electrochemistry,chemistry, physical
High active and durable N-doped carbon spheres-supported flowerlike PtPd nanoparticles for electrochemical oxidation of liquid alcohols

Zhiyong Bai,Juanjuan Luo,Dongquan Ming,Changding Wang,Hao Xu,Weichun Ye

DOI: https://doi.org/10.1016/j.electacta.2020.136794

IF: 6.6

2020-10-01

Electrochimica Acta

Abstract:The development of high active and durable electrocatalysts is of critical importance for the commercial viability of direct alcohol fuel cells. Here, hollow N-doped carbon spheres (HNCSs) were prepared by using a polydopamine-assisted method for supporting flowerlike PtPd alloy nanoparticles which were synthesized by the reduction of H2PtCl6 and Na2PdCl4 with ascorbic acid. The effect of Pt-to-Pd molar ratios on the catalytic activity was investigated for methanol, ethanol and ethylene glycol electrooxidation (MOR, EOR and EGOR). Electrochemical measurements demonstrated that PtPd/HNCSs (only 2 wt.%) exhibited higher catalytic activity, stability and tolerance to CO poisoning than commercial Pt/C (20 wt.%) catalyst in the alcohols oxidation. It could be attributed to the structural and compositional advantages of the synergistic effect of Pt and Pd besides large specific surface area and mesoporous structure of HNCSs. After 200 scanning cycles, the peak currents density of Pt3Pd1/HNCSs still remained 77.8%, 88.9% and 93.9% of the initial cycle in MOR, EOR and EGOR, respectively. Meanwhile, the kinetic study confirmed that the MOR, EOR and EGOR processes were diffusion-controlled and irreversible.

electrochemistry
Surface-Pt-rich AgPtAu trimetallic nanotrough array for boosting alcohol electrooxidation

Wen-Chao Geng,Ling Jiang,Yong-Jun Li,Jing-jing Li

DOI: https://doi.org/10.1039/d3gc00596h

IF: 9.8

2023-03-26

Green Chemistry

Abstract:To develop high-performance low-Pt electrocatalysts for direct alcohol fuel cell (DAFC), we herein propose an interfacial engineering strategy, using interfacial Ag nanowire array as a sacrificing template and successfully fabricating AgPtAu nanotrough array catalyst at water/air interfaces. By adjusting the conditions of interfacial reaction, composition-varied AgPtAu nanotrough array can be obtained easily. The formation of the trough-like morphology of AgPtAu can be attributed to the interface-confined Ag nanowire array reacting successively with PtCl62− and AuCl4‒ in the water phase. Optimized surface-Pt-rich Ag11Pt5Au84 nanotrough array exhibits ~2270 and ~2290 mA⋅mgAu+Pt–1 in the mass activity towards methanol and ethanol electrooxidation, respectively, ~3 times better than commercial Pt/C, and shows the improved tolerance towards CO-like carbonaceous intermediates. This work suggests that properly combining the positive catalytic effects of morphology and composition may be a possible avenue to tackle the issue of low-Pt electrocatalyst of DAFC.

chemistry, multidisciplinary,green & sustainable science & technology
Superior Liquid Fuel Oxidation Electrocatalysis Enabled by Novel Bimetallic PtNi Nanorods

Yangping Zhang,Fei Gao,Pingping Song,Jin Wang,Tongxin Song,Cheng Wang,Chunyan Chen,Liujun Jin,Lei Li,Xing Zhu,Yukou Du

DOI: https://doi.org/10.1016/j.jpowsour.2019.04.001

IF: 9.2

2019-01-01

Journal of Power Sources

Abstract:Great research attention is raised in the field of direct alcohol fuel cells due to their advantages such as potential for clean, renewability, and high energy density. However, the preparation and optimization of high-efficiency anode electrocatalysts are highly desirable yet challenging, which is an essential part in fuel cells. We thereby design a simple but efficient method and then synthesize a series of novel one dimension PtNi nanorods electrocatalysts. The as-prepared PtNi nanorods exhibit excellent electrocatalytic performance towards alcohol oxidations in alkaline medium. The Pt3Ni nanorods with optimized composition show the best mass and activity of 4601.5 mA mg(-1) (11.4 mA cm(-2)) and 7260 mA mg(-1) (18.1 mA cm(-2)) towards glycerol oxidation reaction and ethylene glycol oxidation reaction respectively, 4.6 (5.4) and 6.1 (7.2) times higher than commercial Pt/C catalysts. The present work in situ offers a practical synthetic approach of electrocatalysts and their better catalytic properties in alcohol oxidation reactions, which has a promoting effect for development of liquid fuel cells.
Platinum-Decorated Amorphous Sulfurized Palladium Nanowires for Effective Ethanol Oxidation Reaction

Tao Chen,Manli Wang,Donghang Hu,Qianlin Ju,Kaige Zhao,Liang Fu,Zelin Chen,Xiaolong Yu,Changjiu Li

DOI: https://doi.org/10.1021/acsaem.4c00641

IF: 6.4

2024-01-01

ACS Applied Energy Materials

Abstract:The mainstream electrocatalysts for direct ethanol fuel cells (DEFCs) are Pt- or Pd-based nanomaterials, which are severely hampered by CO intermediate poisoning and the relatively low selectivity of the C1 pathway in anodic ethanol oxidation reaction (EOR), thereby impeding the efficiency enhancement and practical application of DEFCs. Herein, we report a Pt-decorated amorphous PdS nanowire [denoted as a-Pd(S)NWs/Pt] catalyst with abundant crystalline/amorphous heterogeneous interfacial active sites for alkaline EOR. The a-Pd(S)NWs/Pt was demonstrated a superior EOR mass activity of 6.16 Amg(Pd+Pt)(-1), which is 22.81 times over that of commercial Pt/C (0.27 Amg(Pt)(-1)) and 34.22 times over that of commercial Pd/C (0.18 Amg(Pd)(-1)). Additionally, the a-Pd(S)NWs/Pt exhibited considerable stability, significantly enhanced resistance to CO poisoning and enhanced selectivity for the EOR C1 pathway. Density functional theory calculations and experimental results further revealed that the optimized COads and OHads binding energies due to the decoration of Pt nanoclusters can be responsible for the enhanced CO resistance and C1 selectivity of a-Pd(S)NWs/Pt. Furthermore, benefiting from its optimized electronic configuration at the interfacial active sites and the appropriate intermediate adsorption capacity, the a-Pd(S)NWs/Pt electrocatalyst was successfully extended to the electrocatalytic methanol and ethylene glycol oxidation reaction systems.

Dietary fibre in pineapple fruit.

Platinum-Cobalt Nanowires for Efficient Alcohol Oxidation Electrocatalysis

Regulating the Alloying Degree and Electronic Structure of Pt–Au Nanoparticles for High-Efficiency Direct C2+ Alcohol Fuel Cells

Trimetallic PtSnRh Wavy Nanowires As Efficient Nanoelectrocatalysts for Alcohol Electrooxidation.

Modulating Electronic Structure of an Au‐Nanorod‐Core–PdPt‐Alloy‐Shell Catalyst for Efficient Alcohol Electro‐Oxidation

Highly active zigzag-like Pt-Zn alloy nanowires with high-index facets for alcohol electrooxidation

One-stone, two birds: Alloying effect and surface defects induced by Pt on Cu2−xSe nanowires to boost C-C bond cleavage for electrocatalytic ethanol oxidation

Ultrathin PtNiM (M = Rh, Os, and Ir) Nanowires as Efficient Fuel Oxidation Electrocatalytic Materials.

Sub-Monolayer YOx /moox on Ultrathin Pt Nanowires Boosts Alcohol Oxidation Electrocatalysis.

Hierarchical Pt/PtxPb Core/Shell Nanowires As Efficient Catalysts for Electrooxidation of Liquid Fuels

High-Density Surface Protuberances Endow Ternary Ptfesn Nanowires With High Catalytic Performance For Efficient Alcohol Electro-Oxidation

Strain-Induced Porous Pd@PdPt Core/Shell Nanocubes as Effective All-in-One Electrocatalysts toward Multialcohol Oxidation

Preparation of Au@Pd Core–Shell Nanorods with fcc -2H- fcc Heterophase for Highly Efficient Electrocatalytic Alcohol Oxidation

Shape-control of one-dimensional PtNi nanostructures as efficient electrocatalysts for alcohol electrooxidation.

Sub‐Monolayer YO x /MoO x on Ultrathin Pt Nanowires Boosts Alcohol Oxidation Electrocatalysis

Ultrathin porous PdPtNi nanosheets as efficient electrocatalysts for alcohol oxidation reactions

Core-shell Au@PtIr nanowires with dendritic alloy shells as efficient bifunctional catalysts toward methanol oxidation and hydrogen evolution reactions

High active and durable N-doped carbon spheres-supported flowerlike PtPd nanoparticles for electrochemical oxidation of liquid alcohols

Surface-Pt-rich AgPtAu trimetallic nanotrough array for boosting alcohol electrooxidation

Superior Liquid Fuel Oxidation Electrocatalysis Enabled by Novel Bimetallic PtNi Nanorods

Platinum-Decorated Amorphous Sulfurized Palladium Nanowires for Effective Ethanol Oxidation Reaction