Sensing skin for the structural health monitoring of mesoscale structures

Austin Downey

Abstract:Condition evaluation of large-scale (or mesoscale) structures, including civil, aerospace, and energy structures, is difficult due to their large sizes, complex geometries and lack of economic and scalable sensing technologies capable of detecting, localizing, and quantifying faults over a structure’s global area. A key challenge in the monitoring of a mesoscale structure is the need to distinguish between faults in the structure’s global (e.g. changing load paths, loss in global stiffness) and local (e.g. crack propagation, composite delamination) conditions. This work presents a flexible sensing skin for the cost-effective monitoring of large-scale structures, with a special focus on the monitoring of wind turbine blades. The use of sensing skins, also termed electronic artificial skins (e-skins) or dense sensor networks (DSNs), for the condition assessment of structures is an emerging technology enabling a broad range of sensors and their associated electronics to be integrated onto a single sheet. Sensing skins offer a logical solution to the local/global detection problem as it allows for the localized and discrete monitoring of a structure over the structure’s entire global area, and as such, they mimic the ability of biological skin to detect and localize damage. This work proposes, develops specialized algorithms for, and experimentally validates a sensing skin based on a soft elastomeric capacitor (SEC). The SEC is a large-area electronic that transduces a structure’s strain into a measurable change in capacitance. The SEC is highly scalable due to its low cost and ease of fabrication, and can, therefore, be used for the cost-effective monitoring of large-scale components. When arranged in a network configuration, SECs deployed onto the surface of a structure can be used to reconstruct strain maps. These strain maps can then be used to detect, localize, and quantify damage on a structure. One particularly useful attribute of the SEC is its capability to measure the additive strain of a structure (εx + εy). In order to effectively utilize a network of SECs, an algorithm that fuses sensor geometry, along with the sensor locations and measured strain values is proposed and validated. This algorithm allows for the reconstruction of more accurate additive strain maps of a structure without having to increase the number of sensors deployed within a sensing skin. In situations where the structure’s unidirectional strain maps are

Environmental Science,Engineering,Materials Science