Abstract:Neutralization of poly(acrylic acid) (PAA)-based binders using lithium hydroxide is a common strategy for fabricating silicon anode laminates, which improves rheological properties of slurries toward high-quality electrode laminates. However, the significantly increased basicity causes degradation of Si particles while the irreversible conversion of carboxylic acid groups to lithium carboxylates undermines the binding strength, collectively leading to adverse cycling performance of the fabricated Si anodes. Herein, a novel neutralization process for PAA binders is developed. A weak base, ammonia (NH3), was discovered as a neutralizing agent that still promotes rheological response of binder solutions but results in a reduced pH increase. Interestingly, the resulting ammonium carboxylate groups may cleave during the drying process to restore the neutralized PAA (PAA-NH3) binders to their pristine states. The best-performing composition of 50% neutralization (PAA-50%NH3) provides comparable rheological response as a PAA-Li binder as well as much improved cycling performance. The half-cells using the PAA-50%NH3 binder can deliver 60% capacity retention over 100 cycles at C/3 rate, affording a 23.8% increase compared to PAA-Li half-cells. This restorable neutralization process of PAA binders represents an innovative strategy of mitigating issues from slurry processing of Si particles to achieve concurrent improvements in high-quality lamination and cycling performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18559?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18559</a>.The pH values of binder solutions, FTIR, SEM images, SAXS profiles, details regarding full cell cycling, and images of slurries (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18559/suppl_file/am0c18559_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Partially Neutralized Polyacrylic Acid as an Efficient Binder for Aqueous Ceramic-Coated Separators for Lithium-Ion Batteries

Polypropylene Separator Coated with a Thin Layer of Poly(lithium Acrylate‐co‐butyl Acrylate) for High‐performance Lithium‐ion Batteries

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Copolymer-assisted Polypropylene Separator for Fast and Uniform Lithium Ion Transport in Lithium-ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Raspberry-like Micro-Size Polymer with High Spherical Shape-Retention Capability and Adhesion As Binder for Ceramic Separators

Enhanced separator properties by coating alumina nanoparticles with poly(2-acrylamido-2-methyl-1-propanesulfonic acid) binder for lithium-ion batteries

Effect of a Polypropylene Separator with a Thin Electrospun Ceramic/Polymer Coating on the Thermal and Electrochemical Properties of Lithium-Ion Batteries

A Modified Ceramic-Coating Separator with High-Temperature Stability for Lithium-Ion Battery

High‐Performance Al 2 O 3 /PAALi Composite Separator Prepared by Water‐Based Slurry for High‐Power Density Lithium‐Based Battery

Functional Separator with Poly(Acrylic Acid)‐Enabled Li2CO3‐Free Garnet Coating for Long‐Cycling Lithium Metal Batteries

Ion-Selective Polyamide Acid Nanofiber Separators for High-Rate and Stable Lithium-Sulfur Batteries.

Functionalized γ-Boehmite Covalent Grafting Modified Polyethylene for Lithium-Ion Battery Separator

Bifunctional low molecular weight polyacrylic acid as aqueous binder and coating agent enables high performance LiMn 2 O 4 cathode for lithium-ion batteries

Enhancing Lithium‐Ion Battery Performance with Alumina‐Coated Separators: Exploring the Potential of Different Alumina Particle Sizes, Coating Techniques, and Calendering

Restorable Neutralization of Poly(acrylic acid) Binders toward Balanced Processing Properties and Cycling Performance for Silicon Anodes in Lithium-Ion Batteries

Polypropylene Separators with Robust Mussel-inspired Coatings for High Lithium-ion Battery Performances

Bifunctional separator with high thermal stability and lithium dendrite inhibition toward high safety lithium-ion batteries

A New Polysulfide Blocker - Poly(acrylic Acid) Modified Separator for Improved Performance of Lithium-Sulfur Battery

Construction of strengthened crosslinked polymer coating using liquid-like nanoparticle on polyphenylene sulfide nonwoven as separator: Improved cycling performance in lithium-ion battery

A Thin Inorganic Composite Separator for Lithium-Ion Batteries