Spinothalamic neurones in the cat: some electrophysiological observations

R. E. Fox,J. A. Holloway,A. Iggo,S. Mokha

DOI: https://doi.org/10.1016/0006-8993(80)90843-4

IF: 3.61

1980-01-20

Brain Research

Abstract:

What problem does this paper attempt to address?

Regulating Intermediate Adsorption and H2O Dissociation on a Diatomic Catalyst to Promote Electrocatalytic Nitrate Reduction to Ammonia

Xiaoxue Zhang,Xiaokang Liu,Zhen-Feng Huang,Li Gan,Shishi Zhang,Ru Jia,Muhammad Ajmal,Lun Pan,Chengxiang Shi,Xiangwen Zhang,Guidong Yang,Ji-Jun Zou

DOI: https://doi.org/10.1039/d4ee02747g

IF: 32.5

2024-01-01

Energy & Environmental Science

Abstract:Electrochemical conversion of nitrate (NO3-) is an efficient approach to reduce NO3- pollutants and it offers a promising alternative for sustainable NH3 synthesis. However, this process is limited by the mismatched reaction kinetics of NO3- discharge, active hydrogen (H*) formation via water dissociation, and stepwise hydrogenation processes. Herein, using density functional theory (DFT) calculations, we screened a library of Cu-M diatomic catalysts coordinated with a N doped carbon matrix (Cu-M-N-C, M = Fe, Co, Ni, Mn, Zn) by balancing N-containing intermediate adsorption and H2O dissociation barriers. Among these catalysts, Cu-Fe-N-C demonstrates the best performance with a NH3 yield rate of 1.22 mmol h(-1) cm(-2) and a high Faradaic efficiency (FE) for NH3 synthesis of 95.08% at -0.8 V vs. the reversible hydrogen electrode, in which diatomic sites facilitate the first NO3- discharge step to generate adsorbed *NO3 and lower the energy barriers of the following hydrogenation/dehydration steps. More importantly, the incorporated Fe sites could promote the H2O dissociation, providing a large supply of H* for the deep hydrogenation of N-containing intermediates. This work reveals the tunable bonding interactions of diatomic sites with multiple reactant/intermediates, offering a new avenue for rational design of highly efficient atomic-level dispersed catalysts for both NO3- abatement and NH3 synthesis.
Modulation of Charge Distribution Enabling CuNi Nano-Alloys for Efficient Ammonia Oxidation Reaction to Nitrite Production

Zixian Mao,Yunrui Tian,Baitong Guo,Rui Chen,Ye Zeng,Feng Hou,Xiao Yan,Ji Liang

DOI: https://doi.org/10.1016/j.cej.2024.149570

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Electrochemical ammonia oxidation reaction (AOR) is a promising approach for ammonia conversion for its environmental benign and energy-saving features. Nitrite is an important member of the AOR pathway and plays a key role in many biological and industrial processes. To maximize the nitrite production efficiency, it is essential to design stable AOR electrocatalysts which can afford fast electron transfer and high partial current density. Herein, we present a CuNi nano-alloy by introducing Ni into the Cu lattice via a simple electrodeposition method. This CuNi nano-alloy strategy effectively modulates the charge distribution of Cu atoms and reduces the work function of the AOR electrocatalyst, resulting in enhanced electron transport properties as well as increased active sites. As a result, up to 95 % NH4+ conversion rate with a cumulative NO2 concentration of 3.3 g L-1 has been achieved on the Cu8Ni2 alloy catalysts at 1.6 V vs. RHE for 12 h. Significantly, the Cu8Ni2 alloy catalysts can perform stably for 50 h, demonstrating excellent durability for electrocatalytic AOR. Thus, this study provides an efficient, stable, and highly feasible Cu-Ni bimetallic catalyst for the selective and high-rate electrochemical AOR to produce nitrite.
In Situ Loading of Cu2O Active Sites on Island-like Copper for Efficient Electrochemical Reduction of Nitrate to Ammonia.

Chaochen Wang,Fan Ye,Jianhua Shen,Kan-Hao Xue,Yihua Zhu,Chunzhong Li

DOI: https://doi.org/10.1021/acsami.1c21691

IF: 9.5

2022-01-01

ACS Applied Materials & Interfaces

Abstract:Electrochemical nitrate reduction reaction (NO3RR) offers a new pathway for low-temperature green ammonia synthesis. It is widely known that copper and its copper oxide catalysts are selective for NO3RRs, although the role played by their oxidation state in catalysis is not fully understood. Here, we found that in situ electrochemical reduction modulates the oxidation state of copper facilitating in situ loading of Cu2O active sites on island-like copper, and investigated the effect of cuprous oxide on nitrate reduction. We found that the improvement of ammonia yield (Faraday efficiency: 98.28%, selectivity: 96.6%) was closely related to the generation of Cu2O, which exceeded the performance of the state-of-the-art catalysts available today. The presence of a multilayer structure of the material was demonstrated by X-ray photoelectron spectroscopy combined with ion beam sputtering. Using operando Raman spectroscopy, we monitored the reduction process of the catalyst surface oxide species at the applied potential. Density functional theory (DFT) calculations indicated that the stable presence of Cu(I) effectively promotes the conversion of *HNOH to *HNHOH. We optimized the model building for DFT calculations and established relatively more reliable reaction paths, which provided a strong support for a further understanding of the reaction mechanism of NO3RR.
Modulating the valence electronic structure of Co 3 O 4 to improve catalytic activity of electrochemical nitrate-to-ammonia conversion

Wenda Chen,Zhida Chen,Zhencheng Huang,Lirong Zheng,Xiaojuan Zhao,Jiangtao Hu,Huiqun Cao,Yongliang Li,Xiangzhong Ren,Xiaoping Ouyang,Shenghua Ye,Xueqing Yan,Qianling Zhang,Jianhong Liu

DOI: https://doi.org/10.1007/s40843-023-2552-1

2023-01-01

Science China Materials

Abstract:Electrochemical conversion of NO 3 − to NH 3 via the nitrate reduction reaction (NO 3 − RR) is a promising approach for ammonia production and storage of “green hydrogen”. Co 3 O 4 has shown satisfactory Faradaic efficiency toward NH_3 (FE_NH_3) and stability, making it a potential electrocatalyst for the NO 3 − -to-NH 3 conversion. However, the high overpotential required for triggering the NO 3 − RR on Co 3 O 4 limits its conversion efficiency. In this study, we synthesized Cu-doped Co 3 O 4 porous hollow nanospheres (Cu−Co 3 O 4 PHNSs) for NO 3 − RR. Cu-doping effectively reduced the required overpotential and improved the NH 3 yield rate on the Co 3 O 4 matrix without reducing FE_NH_3 and stability. Both experimental and theoretical analyses demonstrated that Cu-doping up-shifted the highest occupied state (HOS) of Co 3 O 4 , narrowed the energy barrier between the HOS of Co 3 O 4 and the lowest unoccupied molecular orbital of NO 3 − , and thus reduced the overpotential required for triggering the electron transfer from Co 3 O 4 to NO 3 − , thereby endowing the as-prepared Cu−Co 3 O 4 PHNSs with outstanding electrocatalytic activity and durability for the NO 3 − -to-NH 3 conversion. This study provides a novel theoretical perspective on the regulation of electrochemical performance.
Dynamically Restructuring Nanoporous Cu-Co Electrocatalyst for Efficient Nitrate Electroreduction to Ammonia

Xue Zhou,Wence Xu,Yanqin Liang,Hui Jiang,Zhaoyang Li,Shuilin Wu,Zhonghui Gao,Zhenduo Cui,Shengli Zhu

DOI: https://doi.org/10.1021/acscatal.4c03336

IF: 12.9

2024-01-01

ACS Catalysis

Abstract:The electrochemical nitrate (NO3-) reduction reaction (NITRR) to ammonia (NH3) offers an environmentally friendly alternative for NH3 synthesis but suffers from limited NH3 yield and low Faradaic efficiency (FE) due to the sluggish kinetics of the hydrogenation process. Herein, nanoporous Cu/CoOOH heterostructure is reported as an efficient electrocatalyst for NITRR. The catalyst achieves a high NH3 yield rate of 275.9 mu mol h(-1) cm(-2) (689.8 mmol h(-1) g(cat)(-1)) and 836.8 mu mol h(-1) cm(-2) (2092.0 mmol h(-1) g(cat)(-1)), with corresponding FE values of 85.3 and 91.5% in 200 and 1400 ppm of NO3--N electrolyte, respectively. In situ Raman spectra reveal that the Cu/CoOOH heterostructure is derived from synergistic chemical/electrochemical redox reaction between NO3- and the CuCo alloy during the NITRR process. Theoretical simulations indicate that Cu/CoOOH exhibits enhanced *NO2 affinity and reduces the energy barrier in the rate-determining *NO2H formation step, effectively facilitating NO3- reduction to NH3.
Heterostructured Co‐Doped‐Cu 2 O/Cu Synergistically Promotes Water Dissociation for Improved Electrochemical Nitrate Reduction to Ammonia

Yanbin Qu,Tianyi Dai,Yuhuan Cui,Guopeng Ding,Yongfu Zhu,Zhili Wang,Qing Jiang

DOI: https://doi.org/10.1002/smll.202308246

IF: 13.3

2023-11-15

Small

Abstract:Abstract Electrochemical nitrate reduction reaction (NO 3 RR) has recently emerged as a promising approach for sustainable ammonia synthesis and wastewater treatment, while the activity and selectivity for ammonia production have remained low. Herein, rational design and controllable synthesis of heterostructured Co‐doped Cu 2 O/Cu nanoparticles embedded in carbon framework (Co‐Cu 2 O/Cu@C) is reported for NO 3 RR. The Co‐Cu 2 O/Cu@C exhibits a high ammonia yield rate of 37.86 mg h −1 mg −1 cat. with 98.1% Faraday efficiency, which is higher than those obtained for most of the Cu‐based catalysts under similar conditions. Density functional theory calculations indicated that the strong electronic interactions at Cu/Co‐Cu 2 O interface facilitate the N species deoxygenation process and doping of Co promotes water dissociation to generate * H for the N species hydrogenation process, leading to enhanced NO 3 RR performance. This work provides a new design strategy toward high‐performance catalysts toward NO 3 RR for ammonia generation.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Optimizing Nitrate Reduction to Ammonia via Modulating Adsorption-Desorption Dynamics with High-Entropy CuNiCoZnMn Alloy Catalysts

Kun Zhang,Zunjie Zhang,Tianfang Yang,Shuaitong Wang,Shizhe Liu,Ziwei Zhao,Shixiang Hu,Zhichao Ma,Jinrui Huang,Yingjie Yang,Ye Chen,Bingcheng Ge

DOI: https://doi.org/10.1021/acsami.4c07339

2024-08-21

Abstract:NO3RR synthesis of ammonia is a complex eight-electron reaction involving multiple steps and intermediates, in which NO3- adsorption and NH3 desorption are crucial. The Cu-based high entropy quinary alloy catalyst has good surface adsorption and desorption ability for the reduction of nitric acid to ammonia. Here, the catalytic sites were coordinated by constructing CuNiCoZnMn alloys to adjust the electronic structure of the catalytic sites to facilitate the reaction of the substrate and thus optimize the whole reaction path. Based on the ternary alloy CuNiCo, the introduction of the Zn element continues to reduce the desorption energy barrier, and the introduction of the Mn element continues to enhance the initial adsorption energy so that the target product can be quickly held and released to accelerate the production of ammonia. The NH3 yield and Faraday efficiency obtained for the quinary CuNiCoZnMn alloy catalyst reached 723.7 μmol h-1 cm-2 and 96.6%, respectively, at -0.35 V vs RHE potential. The density functional theory calculations showed that the quinary CuNiCoZnMn alloy (NO3- to *NO3-) initial adsorption-free energy change and (*NH3 to NH3) NH3 desorption-free energy change are -2.50, 0.072 eV, respectively, which are significantly better than those of the ternary CuNiC and quaternary CuNiCoZn of -2.02, 0.544 eV and -1.97, 0.217 eV.
Heterostructured Co/Co3O4 anchored on N-doped carbon nanotubes as a highly efficient electrocatalyst for nitrate reduction to ammonia

Xianxian He,Hongfei Liu,Jiangzhou Qin,Zhaodong Niu,Jincheng Mu,Baojun Liu

DOI: https://doi.org/10.1039/d3dt01705b

IF: 4

2023-07-14

Dalton Transactions

Abstract:Electrochemical reduction of nitrate (NO3−) to ammonia (NH3) reaction has emerged as an attractive approach for selectively reducing NO3− to highly value-added NH3 and removing NO3− pollutants simultaneously. In this work, heterostructured Co/Co3O4 anchored on N-doped carbon nanotubes was prepared and applied for NO3− reduction towards NH3 in alkaline conditions. The catalyst achieves an outstanding performance with up to 67% NH3 Faradaic efficiency at -1.2 V vs. Hg/HgO and 8.319 mg h-1 mgcat-1 yield at -1.7 V vs. Hg/HgO. In addition, it also displays good long-term stability. 15N isotopic labelling experiments prove that the yielded NH3 is derived from NO3− species. In-situ electrochemical Raman spectra revealed that the structure of as-prepared catalyst showed outstanding stability and identified the possible intermediates during electrocatalytic NO3− reduction reaction (NO3RR).

chemistry, inorganic & nuclear
Modulating the Electronic Structure of Cobalt in Molecular Catalysts via Coordination Environment Regulation for Highly Efficient Heterogeneous Nitrate Reduction

Libo Sun,Chencheng Dai,Tianjiao Wang,Xindie Jin,Zhichuan J. Xu,Xin Wang

DOI: https://doi.org/10.1002/anie.202320027

2024-02-06

Angewandte Chemie International Edition

Abstract:Ammonia (NH3) is pivotal in modern industry and represents a promising next-generation carbon-free energy carrier. Electrocatalytic nitrate reduction reaction (eNO3RR) presents viable solutions for NH3 production and removal of ambient nitrate pollutants. However, the development of eNO3RR is hindered by lacking the efficient electrocatalysts. To address this challenge, we synthesized a series of macrocyclic molecular catalysts for the heterogeneous eNO3RR. These materials possess different coordination environments around metal centers by surrounding subunits. Consequently, electronic structures of the active centers can be altered, enabling tunable activity towards eNO3RR. Our investigation reveals that metal center with an N2(pyrrole)-N2(pyridine) configuration demonstrates superior activity over the others and achieves a high NH3 Faradaic efficiency (FE) of over 90% within the tested range, where the highest FE of approximately 94% is obtained. Furthermore, it achieves a production rate of 11.28 mg mgcat-1 h-1, and a turnover frequency of up to 3.28 s-1. Further tests disclose that these molecular catalysts with diverse coordination environments showed different magnetic moments. Theoretical calculation results indicate that variated coordination environments can result in a d-band center variation which eventually affects rate-determining step energy and calculated magnetic moments, thus establishing a correlation between electronic structure, experimental activity, and computational parameters.

chemistry, multidisciplinary
Cu/Co bimetallic conductive MOFs: Electronic modulation for enhanced nitrate reduction to ammonia

Peng Liu,Jianyue Yan,Hao Huang,Wenbo Song

DOI: https://doi.org/10.1016/j.cej.2023.143134

IF: 15.1

2023-04-29

Chemical Engineering Journal

Abstract:Electrochemical reduction of nitrate to ammonia is an eco-friendly strategy to remove the nitrate pollution in waste effluents. Developing new-type electrocatalysts with high activity for NO 3 RR has attracted worldwide attention. Owing to the numerous active single-metal sites, electric conductivity and ordered in-plane porous structure, conductive metal–organic frameworks (cMOFs) are promising alternative to construct the next-generation NO 3 RR electrocatalysts. In this work, a bimetallic cMOF (Cu x Co y HHTP) is proposed for efficient NO 3 – electroreduction to ammonia and the synergy effect between different types of single-metal sites is also revealed. As the result, the optimal Cu 1 Co 1 HHTP exhibits an outstanding electrocatalytic activity with a high NH 3 yield rate of 299.9 μmol h −1 cm −2 and a large Faradic efficiency of 96.4%. Both theoretical and experimental results reveal that the Co sites can affect the electron structure of Cu sites in Cu 1 Co 1 HHTP slab and decrease the ΔG of potential determining step in NO 3 RR process. Moreover, the Co sites bring a higher selectivity to Cu active sites for reducing *NO 2 to *NO, rather than the desorption of NO 2 – . The bimetallic c-MOFs strategy will innovate the design concept of next-generation catalyst, paving the way to investigate catalytic mechanism of single-metal-atom and open up their application prospects.

engineering, chemical, environmental
Mixed-valence Cu-based heterostructures for efficient electrochemical nitrate reduction to ammonia

Jingrui Ye,Yilin Yang,Mengjuan Teng,An Wang,Jiawei Xia,Guangyu He,Haiqun Chen

DOI: https://doi.org/10.1039/d3dt03849a

2024-01-23

Abstract:The electrocatalytic NO3- reduction reaction (NO3RR) to NH3 provides a promising pathway for ambient NH3 synthesis and environmental pollution treatment. Cu and its oxides are recognized as effective NO3RR electrocatalysts due to their favorable d-orbital energy levels and superior kinetics. In this work, mixed-valence Cu-based catalysts with tunable valence states were constructed via an inorganic salt-induced MOF-derived strategy. Notably, optimized Cu-CuxO/C-0.3 featured a Cu/Cu2O heterostructure and demonstrated the lowest Cu valence state. The resulting Cu/Cu2O heterointerface facilitated electron transfer and increased the density of electrochemically active sites, leading to an enhanced faradaic efficiency of 81.4% and a remarkable yield rate of 13.38 mg h-1 cm-2 (ca. 2.39 mol h-1 gcat.-1) at -0.8 V vs. RHE. This work presents insights for designing multi-phase heterostructured NO3RR catalysts and emphasizes their potential significance in efficient ammonia production.
Regioselective Doping into Atomically Aligned Core–Shell Structures for Electrocatalytic Reduction of Nitrate to Ammonia

Ying Zhang,Tianyi Gao,Fei Zhang,Xuelian Qu,Yutong Luo,Pu Zhang,Jia Liang,Yun Song,Fang Fang,Fei Wang,Dalin Sun,Yang Liu

DOI: https://doi.org/10.1002/aenm.202401834

IF: 27.8

2024-08-28

Advanced Energy Materials

Abstract:The Cu─CoO/Co(OH)2 doped core/shell structures obtained by in situ electrochemical activation exhibit outstanding performance in electrocatalytic nitrate reduction to ammonia. Combining the in situ spectroscopic characterizations with theoretical calculations, it is illustrated that core/shell configuration and Cu dopants can accelerate electron transfer and enhance the adsorption of key intermediates. The catalysts can also serve as the cathode for high‐performing Zn−NO3− batteries. The electrochemical nitrate reduction reaction (NO3−RR) presents an environmentally friendly approach for efficient NO3− pollutant removal and ammonia (NH3) production, compared to the conventional Haber–Bosch approach. While core/shell engineering has demonstrated its potential in enhancing NO3−RR performance, significant synthetic challenges and limited shell layer modification capabilities impede the exploration of high‐performance NO3−RR core/shell catalysts. Herein, CuCoO/Co(OH)2 core/shell structure via in situ electrochemical activation is synthesized. The catalyst delivers a maximum NH3 Faradaic efficiency (FE) of 94.7% at −0.5 VRHE with excellent durability and selectivity for NH3 over a wide range of potentials in NO3−RR, surpassing the electrocatalytic performance of both undoped shell and core components. The outstanding performance Cu─CoO/Co(OH)2 is ascribed to the enhanced charge transfer, stabilization of key reaction intermediates, and regulation of hydrogen adsorption over Cu‐doped core/shell structure. Furthermore, the assembled Zn−NO3− battery device attains a peak current density exceeding 32 mA cm−2 and an NH3 yield of up to 145.4 μmol h−1 cm−2. The work offers a novel core/shell engineering strategy in electrocatalytic NO3−RR and sheds light on the doping effects on the electrochemical NH3 synthesis.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Boosting Electrochemical Nitrate Reduction to Ammonia by Fe Doped CuO/Co3O4 Nanosheet/Nanowire Heterostructures

Baojian Zhang,Jinxiu Zhao,Huancheng Qiu,Mingliang Chen,Xiang Ren,Huan Wang,Qin Wei

DOI: https://doi.org/10.1002/cphc.202400738

IF: 3.52

2024-09-11

ChemPhysChem

Abstract:The electrochemical nitrate reduction reaction (NO3 -RR) is a novel green method for ammonia synthesis. The development of outstanding NO3 -RR performance is based on reasonable catalyst. Metal oxides have garnered significant attention due to their exceptional electrical conductivity and catalytic properties. Doping serves as an effective strategy for enhancing catalyst performance due to its ability to change the electron cloud distribution and energy levels. In this study, we develop a heterojunction catalyst Fe doped copper oxide nanosheet and cobalt tetroxide nanowire growing on carbon cloth simultaneously (Fe-CuO@Co3O4/CC) via hydrothermal method. The well-designed Fe-CuO@Co3O4/CC has excellent NH3 yield (470.9 μmol h-1 cm-2) and Faraday efficiency (FE: 84.4 %) at -1.2 V versus reversible hydrogen electrode (vs. RHE). The heterostructure increases the specific surface area of the catalyst, and the possibility of contact between the catalyst and NO3 - ions, enhances the catalytic efficiency. In addition, the catalyst has excellent stability and can stably carry out the electrocatalytic nitrate reduction reaction (NO3 -RR), which provides a way for further research on the high-efficiency reduction of nitrate.
Enhanced Nitrate-to-Ammonia Activity on Copper-Nickel Alloys Via Tuning of Intermediate Adsorption

Yuhang Wang,Aoni Xu,Ziyun Wang,Linsong Huang,Jun Li,Fengwang Li,Joshua Wicks,Mingchuan Luo,Dae-Hyun Nam,Chih-Shan Tan,Yu Ding,Jiawen Wu,Yanwei Lum,Cao-Thang Dinh,David Sinton,Gengfeng Zheng,Edward H. Sargent

DOI: https://doi.org/10.1021/jacs.9b13347

IF: 15

2020-01-01

Journal of the American Chemical Society

Abstract:Electrochemical conversion of nitrate (NO3-) into ammonia (NH3) recycles nitrogen and offers a route to the production of NH3, which is more valuable than dinitrogen gas. However, today's development of NO3- electroreduction remains hindered by the lack of a mechanistic picture of how catalyst structure may be tuned to enhance catalytic activity. Here we demonstrate enhanced NO3- reduction reaction (NO3-RR) performance on Cu50Ni50 alloy catalysts, including a 0.12 V upshift in the half-wave potential and a 6-fold increase in activity compared to those obtained with pure Cu at 0 V vs reversible hydrogen electrode (RHE). Ni alloying enables tuning of the Cu d-band center and modulates the adsorption energies of intermediates such as *NO3-, *NO2, and *NH2. Using density functional theory calculations, we identify a NO3-RR-to-NH3 pathway and offer an adsorption energy-activity relationship for the CuNi alloy system. This correlation between catalyst electronic structure and NO3-RR activity offers a design platform for further development of NO3-RR catalysts.
Fe/Cu diatomic catalysts for electrochemical nitrate reduction to ammonia

Shuo Zhang,Jianghua Wu,Mengting Zheng,Xin Jin,Zihan Shen,Zhonghua Li,Yanjun Wang,Quan Wang,Xuebin Wang,Hui Wei,Jiangwei Zhang,Peng Wang,Shanqing Zhang,Liyan Yu,Lifeng Dong,Qingshan Zhu,Huigang Zhang,Jun Lu

DOI: https://doi.org/10.1038/s41467-023-39366-9

IF: 16.6

2023-06-19

Nature Communications

Abstract:Abstract Electrochemical conversion of nitrate to ammonia offers an efficient approach to reducing nitrate pollutants and a potential technology for low-temperature and low-pressure ammonia synthesis. However, the process is limited by multiple competing reactions and NO 3 − adsorption on cathode surfaces. Here, we report a Fe/Cu diatomic catalyst on holey nitrogen-doped graphene which exhibits high catalytic activities and selectivity for ammonia production. The catalyst enables a maximum ammonia Faradaic efficiency of 92.51% (−0.3 V(RHE)) and a high NH 3 yield rate of 1.08 mmol h −1 mg −1 (at − 0.5 V(RHE)). Computational and theoretical analysis reveals that a relatively strong interaction between NO 3 − and Fe/Cu promotes the adsorption and discharge of NO 3 − anions. Nitrogen-oxygen bonds are also shown to be weakened due to the existence of hetero-atomic dual sites which lowers the overall reaction barriers. The dual-site and hetero-atom strategy in this work provides a flexible design for further catalyst development and expands the electrocatalytic techniques for nitrate reduction and ammonia synthesis.

multidisciplinary sciences
Energy-Efficient Ammonia Synthesis from Nitrate via CoNi Alloys Incorporated in Carbon Frameworks

Fengcai Lei,Yiming Zhang,Mengmeng Xu,Kun Li,Menghan Zhang,Ruixue Huai,Junfeng Xie,Pin Hao,Guanwei Cui,Bo Tang

DOI: https://doi.org/10.1021/acssuschemeng.3c01688

IF: 8.4

2023-06-06

ACS Sustainable Chemistry & Engineering

Abstract:As a nitrogen-containing source, nitrate is regarded as a promising precursor for generating ammonia (NH3) through electrochemical processes that can potentially mitigate the problem of groundwater contamination and the hydrogen-carrier energy crisis. Herein, we report a cobalt zeolitic imidazolate framework (ZIF-67)-derived catalyst of CoNi alloys incorporated in N-doped carbon frameworks for nitrate electroreduction. Computational results obtained using the density functional theory give a deep insight that the structure of CoNi alloys embedded in the N-doped carbon skeleton can inhibit the production of hydrogen and facilitate the hydrogenation of *NO intermediates. The enriched active sites from the ZIF-67-derived structure and the introduction of Ni in the catalyst afford desirable electrocatalytic performance. Finally, the optimized CoNi@NC hybrid can achieve an ammonia production of 168 mmol gcat –1 h–1 and a Faradaic efficiency of ∼93% at a potential as low as −0.1 V vs reversible hydrogen electrode (RHE). The highest yield rate of 1254 mmol gcat –1 h–1 can be detected at −0.6 V vs RHE. This study can inspire further development of non-noble metal-based hybrid electrocatalysts for nitrate reduction and also anticipation into sustainable synthesis of carbon-related fuels from CO2 reduction.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Intermediates Regulation via Electron‐deficient Cu Sites for Selective Nitrate‐to‐Ammonia Electroreduction

Zhengxiang Gu,Yechuan Zhang,Xuelian Wei,Zhenyu Duan,Qiyong Gong,Kui Luo

DOI: https://doi.org/10.1002/adma.202303107

IF: 29.4

2023-09-22

Advanced Materials

Abstract:NH3 (NH3), known as one of fundamental raw materials for manufacturing commodities such as chemical fertilizers, dyes, ammunitions, pharmaceuticals, and textiles, exhibits a high hydrogen storage capacity of ∼17.75%. Electrochemical nitrate reduction (NO3RR) to valuable ammonia at ambient conditions is a promising strategy to facilitate the artificial nitrogen cycle. Herein, copper‐doped cobalt selenide nanosheets with selenium vacancies are reported as a robust and high‐efficient electrocatalyst for the reduction of nitrate to ammonia, exhibiting a maximum Faradaic efficiency (FE) of ∼93.5% and an ammonia yield rate of 2360 μg h−1 cm−2 at −0.60 V versus reversible hydrogen electrode (RHE). The in situ spectroscopic and theoretical study demonstrate that the incorporation of Cu dopants and Se vacancies into cobalt selenide efficiently enhances the electron transfer from Cu to Co atoms via the bridging Se atoms, forming the electron‐deficient structure at Cu sites to accelerate NO3− dissociation and stabilize the *NO2 intermediates, eventually achieving selective catalysis in the entire NO3RR process to produce ammonia efficiently. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Electrocatalytic Reduction of Nitrate/Nitrite to Ammonia on CuCo Nanoparticles Decorated N‐doped Carbon

Chuanfei Cang,Rong Hua,Guoqing Shen,Mengxue Ma,Yu Chen,Haoquan Zheng

DOI: https://doi.org/10.1002/adsu.202400523

IF: 6.737

2024-10-03

Advanced Sustainable Systems

Abstract:The CuCo nanoparticles decorated N‐doped carbon (CuCo‐NC) derived from zeolitic imidazolate framework (ZIF) with a cross‐shaped leaf structure has been synthesized as electrocatalysts for NO3−/ NO2− reduction. The obtained CuCo‐NC possesses Cu‐doped Co metallic nanoparticles, and hierarchical structure, and demonstrated to exhibit good activity and selectivity in electrocatalytic NO3−/NO2− reduction to NH3 synthesis. Electrocatalytic nitrate (NO3−)/nitrite (NO2−) reduction of ammonia (NH3) provides energy‐saving and sustainable methods for NH3 synthesis. However, both reactions involve multiple electrons and multiple protons, making the reaction process complex with many by‐products. Thus, efficient catalysts are needed to improve the selectivity and yield of ammonia. Herein, the CuCo nanoparticles decorated N‐doped carbon (CuCo‐NC) derived from zeolitic imidazolate framework (ZIF) with a cross‐shaped leaf structure has been synthesized as electrocatalysts for NO3−/ NO2− reduction. The obtained CuCo‐NC possesses Cu‐doped Co metallic nanoparticles, and hierarchical structure, and demonstrated to exhibit good activity and selectivity in electrocatalytic NO3−/NO2− reduction to NH3 synthesis. In the electrocatalytic NO3− reduction of NH3, the Faraday efficiency of NH3 reached 97% and the yield reached 7.17 mg h−1 cm−2 at −0.3 V. In the electrocatalytic NO2− reduction of NH3, the Faraday efficiency of NH3 reached 92% and the yield reached 8.34 mg h−1 cm−2 at −0.3 V, demonstrating good stability in the cyclic electrolysis of both reactions. The CuCo‐NC with a cross‐shaped leaf structure exhibits excellent electrocatalytic NO3−/NO2− reduction activity of CuCo‐NC and therefore highlights the promising potential of bimetallic electrocatalysts for NH3 synthesis.

materials science, multidisciplinary,green & sustainable science & technology
Advances in Brief Arsenic Induces Apoptosis through a c-Jun NH 2-Terminal Kinase-dependent , p 53-independent Pathway 1

Chuanshu Huang,Weiya Ma,Jingxia Li,Z. Dong

Abstract:Arsenic has been used as an effective chemotherapy agent for some human cancers, such as acute promyelocytic leukemia. In this study, we found that arsenic induces activation of c-Jun NH2-terminal kinases (JNKs) at a similar dose range for induction of apoptosis in JB6 cells. In addition, we found that arsenic did not induce p53-dependent transactivation. Similarly, there was no difference in apoptosis induction between cells with p531/1 or p53 2/2. In contrast, arsenic-induced apoptosis was almost totally blocked by expression of a dominant-negative mutant of JNK1. These results suggest that the activation of JNKs is involved in arsenic-induced apoptosis of JB6 cells. Taken together with previous findings that p53 mutations are involved in ;50% of all human cancers and nearly all chemotherapeutic agents kill cancer cells mainly by apoptotic induction, we suggest that arsenic may be a useful agent for the treatment of cancers with p53 mutation.
Co3O4 nanoparticles embedded in porous carbon nanofibers enable efficient nitrate reduction to ammonia

Li Zhong,Qiru Chen,Haitao Yin,Jun Song Chen,Kai Dong,Shengjun Sun,Jun Liu,Haohong Xian,Tingshuai Li

DOI: https://doi.org/10.1039/d3cc02023a

IF: 4.9

2023-06-30

Chemical Communications

Abstract:The nitrate reduction reaction is emerging as having tremendous potential to mitigate nitrate pollution and simultaneously produce valuable ammonia. Here, we propose Co 3 O 4 nanoparticles embedded in porous carbon nanofibers (Co 3 O 4 @CNF) as a high-efficiency catalyst to convert nitrate to ammonia, and it achieves a high faradaic efficiency of 92.7% and an extremely large NH 3 yield of 23.4 mg h −1 mg −1 cat , and also presents excellent electrochemical stability. Theoretical calculations reveal that the potential determining step (PDS) reaches as low as 0.28 eV. This work is expected to open a new avenue to rationally design robust noble-metal-free catalysts for the electrochemical synthesis of ammonia.

chemistry, multidisciplinary

Spinothalamic neurones in the cat: some electrophysiological observations

Regulating Intermediate Adsorption and H2O Dissociation on a Diatomic Catalyst to Promote Electrocatalytic Nitrate Reduction to Ammonia

Modulation of Charge Distribution Enabling CuNi Nano-Alloys for Efficient Ammonia Oxidation Reaction to Nitrite Production

In Situ Loading of Cu2O Active Sites on Island-like Copper for Efficient Electrochemical Reduction of Nitrate to Ammonia.

Modulating the valence electronic structure of Co 3 O 4 to improve catalytic activity of electrochemical nitrate-to-ammonia conversion

Dynamically Restructuring Nanoporous Cu-Co Electrocatalyst for Efficient Nitrate Electroreduction to Ammonia

Heterostructured Co‐Doped‐Cu 2 O/Cu Synergistically Promotes Water Dissociation for Improved Electrochemical Nitrate Reduction to Ammonia

Optimizing Nitrate Reduction to Ammonia via Modulating Adsorption-Desorption Dynamics with High-Entropy CuNiCoZnMn Alloy Catalysts

Heterostructured Co/Co3O4 anchored on N-doped carbon nanotubes as a highly efficient electrocatalyst for nitrate reduction to ammonia

Modulating the Electronic Structure of Cobalt in Molecular Catalysts via Coordination Environment Regulation for Highly Efficient Heterogeneous Nitrate Reduction

Cu/Co bimetallic conductive MOFs: Electronic modulation for enhanced nitrate reduction to ammonia

Mixed-valence Cu-based heterostructures for efficient electrochemical nitrate reduction to ammonia

Regioselective Doping into Atomically Aligned Core–Shell Structures for Electrocatalytic Reduction of Nitrate to Ammonia

Boosting Electrochemical Nitrate Reduction to Ammonia by Fe Doped CuO/Co3O4 Nanosheet/Nanowire Heterostructures

Enhanced Nitrate-to-Ammonia Activity on Copper-Nickel Alloys Via Tuning of Intermediate Adsorption

Fe/Cu diatomic catalysts for electrochemical nitrate reduction to ammonia

Energy-Efficient Ammonia Synthesis from Nitrate via CoNi Alloys Incorporated in Carbon Frameworks

Intermediates Regulation via Electron‐deficient Cu Sites for Selective Nitrate‐to‐Ammonia Electroreduction

Electrocatalytic Reduction of Nitrate/Nitrite to Ammonia on CuCo Nanoparticles Decorated N‐doped Carbon

Advances in Brief Arsenic Induces Apoptosis through a c-Jun NH 2-Terminal Kinase-dependent , p 53-independent Pathway 1

Co3O4 nanoparticles embedded in porous carbon nanofibers enable efficient nitrate reduction to ammonia