Ischemic heart disease in patients with end-stage renal disease.

S. Fellner,D. Follman,D. S. Dasgupta,C. Ward,J. Spencer,C. Rizowy

DOI: https://doi.org/10.1016/S1073-4449(96)80029-X

1996-07-01

Advances in Renal Replacement Therapy

Abstract:

What problem does this paper attempt to address?

Why pebbles float to the surface

J. Maddox

DOI: https://doi.org/10.1038/358535A0

IF: 64.8

1992-08-01

Nature

Abstract:
Cephalometric changes of pushing splints 3 compared to rapid maxillary expansion and facemask therapy on the airway space in class III growing patients: A randomized clinical trial

Angela Galeotti,Valeria Viarani,Lorenzo Franchi,Stefano Martina,Roberto Rongo,Vincenzo D'Antò,Roberto Uomo,Francesco Aristei,Paola Festa

DOI: https://doi.org/10.1111/ocr.12767

2024-02-18

Orthodontics and Craniofacial Research

Abstract:Background Early orthopaedic treatment with rapid maxillary expansion (RME) associated with facemask (FM) has been shown to be effective in correcting Class III malocclusions in children. Treatment with pushing splints 3 (PS3) has shown to correct skeletal discrepancies in Class III growing patients. However, the effects of orthopaedic treatment on the upper airways in children with Class III malocclusion is controversial. Objectives The aim of this study was to evaluate the cephalometric changes in the airways of PS3 compared to the RME/FM protocol. Materials and Methods In this study, 48 patients with Class III malocclusion (age range 5.5–8.5 years old) were selected for this study, and 24 were treated with PS3 appliance and 24 with RME/FM therapy. Lateral cephalograms before (T0) and at the end of the treatment (T1) were analysed to compare pharyngeal spaces. Paired and unpaired t tests were used for data analysis (P

dentistry, oral surgery & medicine
Skeletal and dento-alveolar changes obtained with customised and preformed eruption guidance appliances after 1-year treatment in early mixed dentition

V Lanteri,M G Cagetti,A Ugolini,F Gaffuri,C Maspero,A Abate

DOI: https://doi.org/10.23804/ejpd.2023.1727

2023-09-01

Abstract:Aim: The aim of this study was to assess the skeletal and dento-alveolar changes produced by a customised eruption guidance appliance (EGA) and a preformed EGA in subjects presenting a skeletal class II pattern during early mixed dentition and to evaluate the differences between the two devices. Methods: All subjects included in the study were randomly selected from the record's archive according to the following inclusion criteria: (1) patients presenting upper central incisor and first permanent molars fully erupted; (2) early mixed dentition with age between 7 to 9 years old; (3) Angle class I or class II malocclusion; (4) increased overjet > 4 mm;(5) deep bite with at least 2/3 overlapping of the incisors; (6) no previous orthodontic treatment apart from maxillary expansion treatment. All children belonging to the case group received treatment with a 3D printed EGA whereas the other patients belonging to the control group were treated with preformed EGA. Records consisted in digital dental models and lateral cephalogram at the beginning (T0) and after 1 year of treatment (T1). Data collected on the digital models included the dentoalveolar changes in overbite, overjet, sagittal molar relationship, and dental crowding. Cephalometric tracings were computed by a single blinded observer using Dolphin Imaging software. Statistical analysis was performed with SPSS (version 25.00; IBM Corp, Armonk, NY). Comparison regarding the cephalometric changes between T1-T2 was carried out with paired t-test. Difference in distribution regarding sagittal molar and canine relationship and anterior crowding between groups at T1 and T2 has been computed with chi-square test. The independent sample t-test was used to perform the between group comparison. Conclusion: In the short time, both the appliances showed to be effective in correcting class II malocclusion, anterior crowding, overjet and overbite. Custom-made appliance demonstrated to be significantly more effective in correcting anterior crowding, the dento-skeletal vertical relation and position of permanent incisor compared to the preformed appliance. Adopting a customised device, effects due to an average prescription appliance used to a specific patient can be reduced, resulting in more predictable results.
Dentoskeletal effects of functional appliances vs bimaxillary surgery in hyperdivergent Class II patients

Adebimpe O Ibitayo,Valmy Pangrazio-Kulbersh,Jeff Berger,Burcu Bayirli

DOI: https://doi.org/10.2319/060110-297.1

Abstract:Objective: To compare treatment outcomes of growing and nongrowing Class II patients characterized by mandibular retrusion and increased vertical dimension. Materials and methods: Seventeen patients (mean age 9 years 5 months) were treated with a Bionator fabricated with posterior bite block and high-pull headgear, while 15 patients (mean age 23 years 6 months) received Le Fort I osteotomy for maxillary impaction and mandibular advancement. These groups were compared with 17 nontreated control subjects from the Bolton and Michigan growth studies. Lateral cephalograms taken for the functional group at T1 (initial records), T2 (completion of functional appliance treatment), and T3 (completion of comprehensive treatment) were compared with radiographs taken at T1 (initial records), T2 (immediate post surgery), and T3 (1 year post surgery) for the surgical patients. A null hypothesis of no difference in treatment outcomes between the functional and surgical groups was proposed. A mixed-design analysis of variance was used to compare changes within and between groups. Significance was set at P ≤ .002. Results: In the functional appliance group, the mandible showed a more favorable growth direction and rotation. Both groups had stable results over time and finished treatment with similar cephalometric measurements. Conclusion: Both the functional appliances and orthognathic surgery resulted in similar dentoskeletal treatment changes. The control groups did not self correct either in the anteroposterior or vertical dimensions.
Evaluation of Maxillary Protraction Using a Mini Screw-Retained Palatal C-Shaped Plate and Face Mask

Mohamed Abdallah Elsaharty,Safaa Ali Ghobashi,Eman El-Shorbagy

DOI: https://doi.org/10.4274/TurkJOrthod.2023.2022.63

2024-09-30

Abstract:Objective: To evaluate a newly designed minimally invasive palatal-plate face mask combination for the management of developing Class III malocclusion due to maxillary deficiency. Methods: A sample of 16 Class III patients due to maxillary deficiency in the early mixed dentition (8 boys and 8 girls) aged between 7 and 9 years participated in this study and were treated with a combination of palatal plate face masks. Extra-oral elastics were attached between the intra-oral and extra-oral appliances; the elastics were set at 30° to the occlusal plane. The force magnitude was 250-300 g per quadrant. Cephalometric radiographs were taken before and immediately after maxillary protraction. In addition, skeletal measurements were measured, tabulated, and statistically analyzed. The pre- and post-protraction measurements were compared using the Student's t-test, and the significance level was set at a p-value <0.05. Results: A statistically significant increase in SNA angle and maxillary length was observed by 3.13±1.52 degrees and 2.60±0.75 mm (p<0.05), respectively, indicating forward maxillary growth. The skeletal and soft tissue patterns were also improved, as evidenced by the statistically significant increase in the ANB angle, Wits appraisal, and H angle by 4.50±1.28 degrees, 5.30±1.86 mm, and 5.02±3.24 degrees (p<0.05), respectively. A favorable clockwise mandibular rotation was observed as evidenced by the increase in the SN/MP angle and the decrease in the SNB angle by 1.46±1.96 degrees and -1.38±1.86 degrees (p<0.05), respectively. Conclusion: The palatal-plate facemask combination is an effective treatment alternative for Class III malocclusion due to maxillary deficiency with minimal pain and discomfort.
Class III malocclusions in deciduous or early mixed dentition: an early orthopaedic treatment

V Quinzi,S E Salvati,A Pisaneschi,M Palermiti,G Marzo

DOI: https://doi.org/10.23804/ejpd.2023.24.01.07

Abstract:Background: An early approach to Class III malocclusions is crucial. From diagnosis to treatment, the aim is be to correct and harmonise maxillary and mandibular growth as quickly as possible. Case report: A new treatment protocol for the early treatment of Class III malocclusions to be used in children in deciduous teething and/or early mixed teething was proposed. Ten children, 6 females and 4 males, with an overall average age of 6.5 years (6 years and 6 months) at time T0 were included in this experimental study. Twelve months orthopaedic interceptive therapy using two protraction facemasks (Delaire and Petit mask) and two types of extraoral elastic bands (8 and 16 oz) were given. Parents/guardians were involved as much as possible to increase compliance with the treatment. Conclusion: The orthopaedic-interceptive treatment for Class III malocclusion intends to provide a potential improvement of the growth response so that significant results can be achieved quickly. The motivational role of the parent can positively influence the child's treatment cooperation. The clinician should then try to make parents understand the importance of early treatment of Class III malocclusion thus obtaining a full cooperation with the parent/ guardian and a good compliance from the child.
The efficacy of Hybrid Hyrax-Mentoplate combination in early Class III treatment: a novel approach and pilot study

Vandana Katyal,Benedict Wilmes,Manuel Nienkemper,M Ali Darendeliler,Wayne Sampson,Dieter Drescher

Abstract:Introduction: The aim of the present study was to assess the skeletal, dental and soft tissue effects of a specific treatment protocol in consecutively treated patients who presented with a Class III malocclusion. Treatment involved the use of a Hybrid Hyrax (HH) in the maxilla, a Mentoplate in the mandible and the application of continuous intra-oral Class III elastics. Method: The treated group was comprised of seven males and seven females (mean pretreatment age 10.4 ± 1.7 yr, range 7.8-12.9 yr). Treatment changes were analysed on lateral cephalograms taken 6-12 months prior to commencing treatment (T1) and at the finish of the orthopaedic phase (T2). Where a normality assumption was met, a parametric paired-sample t-test was used to assess the change differences at T1 and T2. For non-normal data, a non-parametric Wilcoxon sign rank test for related samples was used to assess T1 and T2 differences. The level of statistical significance was set at p < 0.05 (2-tailed). Results: The average sagittal changes showed an improved SNA angle of 2.1 ± 2° (p = 0.002), an ANB angle of 1.9 ± 1.8° (p = 0.002), a Wits improvement of 3.4 ± 2.7 mm (p < 0.001) and an overjet reduction of 2.0 ± 2.2 mm (p = 0.005). There were no statistically significant correlations found between the age at T1, age at treatment start and age at T2 and the changes identified in the cephalometric variables (T2-T1). Conclusion: The HH-Mentoplate Class III treatment protocol induced a mean Wits improvement of 3.4 mm in the maxillary and mandibular sagittal base relationship at the functional occlusal level. This was primarily achieved by sagittal maxillary skeletal protraction with negligible effects on the mandible, facial vertical dimension and the incisor angulations. A controlled clinical study with larger sample sizes and longer follow-up times is needed.
Effects of eruption guidance appliance in the early treatment of Class III malocclusion

Gonzalo Velásquez,Aron Aliaga-Del Castillo,Marcelo Vinicius Valerio,Olga Benário Vieira Maranhão,Felicia Miranda,Guilherme Janson

DOI: https://doi.org/10.2319/071223-488

2024-02-29

The Angle Orthodontist

Abstract:ABSTRACT Objectives To evaluate the dentoskeletal effects and effectiveness of the eruption guidance appliance in Class III patients in the mixed dentition. Materials and Methods The experimental group comprised 22 patients with Class III malocclusion and anterior cross-bite (12 males, 10 females, mean age 7.63 ± 0.96 years) treated with the eruption guidance appliance over a mean period of 1.72 ± 0.48 years. The control group comprised 22 untreated subjects (12 males, 10 females, mean age 7.21 ± 0.60 years) with Class III malocclusion. Lateral cephalometric radiographs were obtained at pretreatment (T1) and posttreatment (T2). Intergroup comparisons were performed with Mann-Whitney and t-tests (P < .05). Results In the experimental and control groups, the anteroposterior relationship between the maxilla and mandible (ANB angle) remained stable during the treatment period (T1 to T2). The mandibular plane angle decreased in the experimental group and increased in the control group. In the experimental group, the lower anterior face height increase and maxillary molar vertical development were significantly smaller compared to controls. Positive overjet was achieved in 54% of the experimental group. Conclusions The eruption guidance appliance produced no change in the skeletal anteroposterior relationship. The anterior cross-bite/edge-to-edge relationship was corrected in only about half of the treated subjects.

dentistry, oral surgery & medicine
Cephalometric evaluation of changes in vertical dimension and molar position in adult non-extraction treatment with clear aligners and traditional fixed appliances

Hailee Rask,Jeryl D English,Clark Colville,Fred Kurtis Kasper,Ronald Gallerano,Helder Baldi Jacob,Hailee RASK,Jeryl D. ENGLISH,Clark COLVILLE,Fred Kurtis KASPER,Ronald GALLERANO,Helder Baldi JACOB

DOI: https://doi.org/10.1590/2177-6709.26.4.e2119360.oar

2021-01-01

Dental Press Journal of Orthodontics

Abstract:ABSTRACT Introduction: Orthodontists have been using clear aligners to treat malocclusions, and one potential effect of treatment with orthodontic aligners is the intrusion and/or resists extrusion of the posterior teeth. This “bite-block effect” is primarily anecdotal due to the frequent occurrence of posterior open bites in patients after clear aligner therapy. Objective: The purpose of this study was to compare changes promoted by clear aligners and traditional fixed appliances in cephalometric measurements of the vertical dimension and molar position in adult patients with Class I malocclusion treated with non-extraction. Methods: Pre- and post-treatment lateral cephalometric radiographs of adult patients treated with either clear aligners (n=44) or traditional fixed appliances (n=22) were selected for retrospective analysis. Eight interval measurements and one nominal measurement were evaluated: anterior overbite (OB), mandibular plane angle related to cranial base (SN_MP) and related to Frankfort (FMA), lower molar height (L6H) and upper molar height (U6H), palatal plane to mandibular plane angle (PP_MP), lower facial height (LFH), total facial height (TFH), and posterior open bite (Posterior_OB). A single evaluator traced all cephalographs, and changes in select measures of the vertical dimension were compared within and between groups. Results: OB decreased (1.15 mm) and L6H increased (0.63 mm) in the traditional fixed appliance group. Mandibular plane angles (related to cranial base and to Frankfort) increased (0.43° and 0.53°, respectively) in the clear aligner group, but just FMA showed significant difference between groups (difference of 0.53°). LFH and TFH increased (ranging from 0.52 mm to 0.80 mm) in both groups, with no differences between treatment modality. Presence of visible posterior open bite significantly increased over the course of treatment. OB, FMA and L6H exhibited an interaction between treatment stage (pre- and post-treatment) and modality (clear aligner therapy and traditional fixed appliances), but no interaction among these three variables was found. Conclusions: The evidence does not support the theory that clear aligner therapy produces better vertical dimension control than traditional fixed appliances. Traditional fixed appliance therapy slightly extruded the lower molar, and clear aligner therapy produced a slightly mandibular backward rotation.
Treatment effects of the MARA appliance and Activator-Headgear combined with fixed appliances in Class II division 1 malocclusion patients: A retrospective longitudinal study

JANSON,Guilherme

DOI: https://doi.org/10.1590/2177-6709.27.6.e2221174.oar

2023-03-28

Dental Press Journal of Orthodontics

Abstract:Brito, Deborah Brindeiro De Araújo ; Bellini-Pereira, Silvio Augusto ; Fonçatti, Camilla Fiedler ; Henriques, José Fernando Castanha ; Janson, Guilherme ; Introduction: Class II division 1 malocclusion treatment with functional devices offers acceptable results. These devices can be removable or fixed, and the essential difference between them is the need for compliance. It is clinically important to investigate if there are differences in the treatment effects of these devices that present different characteristics. Objective: This retrospective longitudinal study compared the treatment effects of Class II correction with the MARA appliance, Activator-Headgear (AcHg) combination, both followed by multibracket fixed appliances, and an untreated control group. Material and Methods: Each experimental group was composed of 18 patients, with a baseline mean age of 11.70 and 10.88 years, treated for 3.60 and 3.17 years. The control group consisted of 20 subjects with baseline mean age of 11.07 years. The groups were evaluated before (T1) and after (T2) treatment. Lateral radiographs were used to evaluate the treatment changes with treatment (T2-T1), compared to the control group. Intergroup comparisons were performed using repeated-measures analysis of variance (ANOVA), followed by Tukey's test. Results: The AcHg group showed significantly greater maxillary growth restriction than the MARA, while the mandibular changes were due to natural growth. Both devices promoted significantly greater maxillary incisors retrusion, mandibular incisors labial inclination, and improvement of overjet and molar relationships, compared to the control. Conclusions: Both functional devices followed by multibracket appliances were effective to correct Class II malocclusion. Nonetheless, the AcHg combination presents superior skeletal effects, due to significantly greater maxillary growth restriction compared to the MARA appliance. Moreover, the appliances presented similar dentoalveolar effects.
Dento-Skeletal Class III Treatment with Mixed Anchored Palatal Expander: A Systematic Review

L. Nucci,L. Perillo,G. Minervini,Bruno M. Strangio,A. Inchingolo,V. Grassia,F. d’Apuzzo,G. Dipalma

DOI: https://doi.org/10.3390/app12094646

2022-05-05

Applied Sciences

Abstract:Bone-anchored appliances for the treatment of Class III malocclusions have recently been found to reduce the dentoalveolar effects caused by conventional tooth-borne devices while also improving orthopaedic outcomes in growing patients. The goal of this systematic review was to compare the outcomes of skeletal Class III interceptive treatment with dental anchoring devices to those achieved with mixed anchored palatal expanders. The inclusion criteria were as follows: patients who were treated with hybrid anchored palatal expanders and different maxillary advancement appliances. Study quality was estimated using the Newcastle–Ottawa scale. A search on the Pubmed, Scopus, Embase and Cochrane Library databases yielded 350 papers. Following the initial abstract selection, 65 potentially acceptable papers were thoroughly examined, resulting in a final selection of 9 articles. The results in the short-term showed that combined tooth-borne and bone-borne appliances for rapid maxillary expansion might be recommended in protocols of skeletal Class III treatment to obtain more skeletal effects and reduce side effects on the upper teeth.

Medicine
Complementation of an Enterococcus hirae (Streptococcus faecalis) mutant in the alpha subunit of the H+‐ATPase by cloned genes from the same and different species

T. Suzuki,Chiyo Shibata,Akie Yamaguchi,K. Igarashi,Hiroshi Kobayashi

DOI: https://doi.org/10.1111/j.1365-2958.1993.tb01673.x

1993-07-01

Molecular Microbiology

Abstract:We isolated an Enterococcus hirae (formerly Streptococcus faecalis) mutant, designated MS117, in which ‘G’ at position 301 of the alpha‐subunit gene of the F1F0 type of H+‐ATPase was deleted. MS117 had low H+‐ATPase activity, was deficient in the regulatory system of cytoplasmic pH, and was unable to grow at pH6.0. When the alpha‐subunit gene of E. hirae H+‐ATPase was ligated with the shuttle vector pHY300PLK at the downstream region of the tet gene of the vector, it was expressed without its own promoter in MS117, and the mutation of MS117 was complemented; the mutant harbouring the plasmid had the ability to maintain a neutral cytoplasm and grew at pH6.0. We next transformed MS117 with pHY300PLK containing the alpha‐subunit gene of Bacillus megaterium F1F0‐ATPase constructed in the same way. The transformant grew at pH 6.0, and the ATP hydrolysis activity was recovered. These results suggested that an active hybrid H+‐ATPase containing the B. megaterium alpha subunit was produced, and that the hybrid enzyme regulated the enterococcal cytoplasmic pH, although the function of the B. megaterium enzyme did not include pH regulation. Thus, our present results support the previous proposal that the enterococcal cytoplasmic pH is regulated by the F1F0 type of H+‐ATPase.
A simple equivalent circuit model for shielding analysis of magnetic sheets

H. Park,J. Kwon,Seungyoung Ahn

DOI: https://doi.org/10.1109/CEFC.2016.7815910

2016-11-01

Abstract:This paper presents a simple equivalent circuit model for estimating shielding performance of thin and flexible magnetic sheets, which are commonly used in modern mobile devices such as smartphones. The proposed equivalent circuit model can accurately represent the measurement setup using a microstrip line and a loop probe that are typically employed to evaluate a shielding effectiveness (SE) of commercial magnetic absorbing sheets. The calculated SEs using the proposed model are validated by full-wave simulation and experiment.
Chromosome 7 short-arm interstitial deletion (p14)

S. Moedjono,S. Funderburk,R. Sparkes

DOI: https://doi.org/10.1007/BF00283574

1978-10-19

Human Genetics

Abstract:
Long-term skeletodental changes with early and late treatment using modified C-palatal plates in hyperdivergent Class II adolescents

Jaehyun Kim,Nam-Ki Lee,Yoon-Ah Kook,Yoonji Kim,Chong Ook Park,Alex Hung Kuo Chou,Sung-Hoon Han,Jae Hyun Park

DOI: https://doi.org/10.2319/081123-556.1

2024-01-16

The Angle Orthodontist

Abstract:ABSTRACT Objectives To compare skeletodental changes between early and late treatment groups using modified C-palatal plates (MCPP) and long-term retention outcomes in hyperdivergent Class II adolescents. Materials and Methods Seventy-one hyperdivergent Class II patients were divided into four groups according to treatment modality and treatment timing: group 1, early treatment with MCPP (n = 16; 9.9 ± 0.9 years); group 2, late treatment with MCPP (n = 19; 12.3 ± 0.8 years); group 3, early treatment with headgear (HG; n = 18; 9.6 ± 0.8 years); and group 4, late treatment with HG (n = 18; 12.1 ± 1.2 years). Lateral cephalograms were taken and skeletal and dental variables were measured. For statistical analysis, paired t-tests, independent t-tests, and multiple regression were performed. Results The early MCPP group showed a more significant decrease in mandibular plane angle than the late MCPP group did, and vertical control was more efficient in the early group than in the late group. In the MCPP groups, both FMA and SN-GoGn were increased with late treatment but decreased with early treatment, and the difference was statistically significant (P < .01). The early-treatment MCPP group had a significant decrease in SN-GoGn of 0.6° compared with an increase of 1.7° in the early treatment HG group (P < .01). Posttreatment stability of both the early and late MCPP groups was maintained in long-term retention. Conclusions Early MCPP showed more significant vertical control than late MCPP. However, there was no difference in long-term stability between early and late groups.

dentistry, oral surgery & medicine
Retrospective comparison of dental and skeletal effects in the treatment of Class II malocclusion between Herbst and Xbow appliances

Natalia Martins Insabralde,Marcio Rodrigues de Almeida,Renata Rodrigues de Almeida-Pedrin,Carlos Flores-Mir,José Fernando Castanha Henriques

DOI: https://doi.org/10.1016/j.ajodo.2020.05.021

Abstract:Introduction: The purpose of this research was to compare dentoskeletal changes produced by Herbst and Xbow appliances in late mixed/early permanent dentition patients with Class II Division 1 malocclusion to an untreated control group. Methods: The retrospective cohort consisted of 41 patients treated with the Herbst appliance on average for 14 months (mean age of 11.3 years), 41 patients treated with Xbow appliance on average for 14 months (mean age of 11.11 years), and an untreated control sample of 25 patients followed on average for 21 months (mean age of 11.9 years). All patients had Class II Division 1 malocclusion characteristics. Lateral cephalometric radiographs were taken before and after phase 1 treatment/follow-up. Data were analyzed by an analysis of variance followed by Tukey post-hoc tests. Results: Although there was a high equivalence among the groups in the pretreatment cephalometric values, 4 variables showed differences (U6-FHp, L6-FHp, LAFH, and PP-U1). When comparing the mean changes (before and after phase 1 treatment/follow-up), incisor mandibular plane angle (IMPA), Wits appraisal, L6-FHp, Co-Pog, and PP-U1 measurements showed statistically significant differences. In addition, more relative mesial movement of the mandibular molars (an additional 2.4 mm) and a larger increase in mandibular length (an additional 3.2 mm) was noted for the Herbst group. Conclusions: Class II correction using Herbst and Xbow occurred in both groups through improvement in the maxillomandibular relationship and labial inclination of the mandibular incisors, as well as a relatively increased mesialization of the mandibular molars. Although both appliances improve occlusal features, the portrayed changes were not always similar. Herbst seems to produce more mandibular size increase over a similar treatment period.
Cephalometric changes in pharyngeal airway dimensions after functional treatment with twin block versus myobrace appliances in developing skeletal class II patients: a randomized clinical trial

Ahmed M Madian,Dina Elfouly

DOI: https://doi.org/10.1186/s12903-023-03701-9

2023-12-13

BMC Oral Health

Abstract:Background: Several appliances have been used for correction of developing skeletal Class II, including different myofunctional appliances as Twin block (TB)as well as the new pre-fabricated Myobrace (MB) appliance. However, the effects of these devices on the pharyngeal airways have not been compared in the literature. Thus, the aim of this study was to compare the effects of two Class II correction appliances; TB and MB on the sagittal pharyngeal airway dimension (SPAD), including the nasopharyngeal airway area (NPAA), the oropharyngeal airway area (OPAA), and the laryngopharyngeal airway area (LPAA). Methods: This is a two parallel arms randomized comparative clinical trial. Twenty-six children of 9-12 years with Skeletal Class II malocclusion due to mandibular deficiency and normal maxillary growth as confirmed by lateral cephalometric X-ray readings (ANB angle > 4° and SNB angle < 78) and Cervical vertebral maturational index (CVMI) 1 or 2 were randomly assigned into two equal groups. Group I: TB, Group II: MB (prefabricated functional appliance, Myofunctional Research Co., Australia). Lateral cephalograms were taken for all patients in both groups before treatment (T1) and after treatment (6 months later) (T2). The primary aim was to assess pre and post treatment changes in the SPAD in each group, and compare between the two study groups. The secondary aim was to evaluate the sagittal skeletal measurements such as the SNA, SNB, ANB, Wits appraisal, as well as vertical skeletal measurements represented by the Frankfurt-mandibular plane angle (FMA) measured pre- and post-treatment. The independent samples t-test was used to compare the two study groups, and the mean difference and 95% confidence intervals (CI) were computed. The paired samples t-test was used to compare various parameters between T1 and T2 within each group. The cutoff for significance was p-value < 0.05. Data were analyzed using IBM SPSS for Windows (Version 26.0). Results: By Comparing changes in airway measurements within each group, it was found that NPAA, OPAA, and LPAA increased significantly after treatment within each group of MB and TB. TB group showed significantly higher mean difference (T2-T1) in both NPAA and OPAA than MB group with 28.39 (± 56.75) and 40.46 (± 52.16) respectively. The increase in LPAA values was not statistically significant at (T2-T1) between both groups. Regarding skeletal changes, there was a significant increase in the SNB values between T1 and T2 within each group with 2.82 (± 3.32) for MB group and 3.79 (± 3.06) for TB group Moreover, there was a significant decrease in the ANB values between T1 and T2 within each group by 2.42 (± 2.70) for MB group and 3.06 (± 1.14) for TB group. Similarly, there was a significant decrease in the ANB values between T1 and T2 within each group by -2.13 (± 0.62) for MB group and - 2.46 (± 0.72) for TB group. No significant differences were found between both groups in SNA, SNB, ANB and Wits appraisal at p = 0.06, p = 0.45, p = 0.43 and p = 0.22 respectively. FMA did not show significant difference between T1 and T2 within each group, nor showed a significant mean difference between both groups at T2-T1. Conclusions: TB was more effective than MB in improving the upper (NPAA) and middle (OPAA) airways, while no difference was found regarding the lower airway (LPAA). Both TB and MB reduced the severity of developing skeletal class II due to mandibular retrognathism by forward posturing of the mandible. Thus, patients with airway problems would benefit more from TB than MB.
Can contrast-enhanced ultrasonography characterize focal liver lesions and differentiate between benign and malignant, thus providing a one-stop imaging service for patients?().

D. Cokkinos,M. Blomley,Chris J. Harvey,Adrian Lim,C. Cunningham,D. Cosgrove

DOI: https://doi.org/10.1016/j.jus.2007.09.002

2007-12-01

Journal of Ultrasound

Abstract:
Class III malocclusion treated with a 3D-printed hybrid hyrax distalizer combined with mentoplate using Alt-RAMEC protocol: A case report

Sarah Joda Kathem,Rannvá Caroline Matras,Salaheddin Omar Mahmoud Abbas

DOI: https://doi.org/10.1177/14653125231184910

Abstract:Introduction: The aim of this report was to assess the skeletal, dental and soft tissue changes in a juvenile patient with a severe class III malocclusion. This case report describes a novel method of class III treatment using skeletal anchorage for maxillary protraction and Alt-RAMEC protocol. Patient concerns: The patient did not have any subjective complaints before treatment and there was no family history of class III malocclusion. Clinical findings and primary diagnoses: Extra-orally, the patient had a concave profile with a retrusive mid-face and prominent lower lip. The intra-oral examination revealed angle class III malocclusion with a -3-mm overjet. There was no anterior displacement on closure when the patient was assessed clinically. According to the cephalometric analysis, the sagittal jaw relation and Wits appraisal were reduced due to a retrognathic maxilla and prognathic mandible. Interventions: The treatment plan involved maxillary protraction, Alt-RAMEC protocol for 10 weeks and upper molar distalisation with a hybrid hyrax distalizer in combination with a mentoplate. The active treatment time was estimated to 18 months followed by 6 months retention with the appliance. Outcomes: The sagittal jaw relationship was increased by approximately 9°, mainly due to maxillary advancement of 8 mm and a positional change of the mandible anteroposteriorly. Natural decompensation of the lower incisors was also observed. In addition, both the facial profile and the smile became more harmonious after treatment. The treatment analysis revealed that the changes achieved were mainly skeletal and it was possible to avoid adverse effects on the dentition. Conclusion: In conclusion, treatment with a hybrid hyrax distalizer combined with mentoplate using the Alt-RAMEC protocol is effective in correcting the anteroposterior discrepancy in a juvenile class III patient and it is possible to achieve maxillary advancement of 8 mm.
Comparison of the skeletodental effects of miniscrew-anchored and tooth-anchored facemask treatment in growing patients with skeletal class III malocclusions

Youn-Kyung Choi,Jung Joo Park,Hyeran Helen Jeon,Yong-Il Kim

DOI: https://doi.org/10.1111/ocr.12680

Abstract:Introduction: This retrospective study aimed to evaluate the skeletal and dental effects of the miniscrew-anchored facemask in skeletal Class III growing patients and compare them with those of conventional tooth-anchored facemasks. Methods: Retrospectively a total of 50 patients with skeletal Class III (mean ANB: -1.12°) were investigated and divided into two groups according to the treatment modality. Twenty-five patients were treated using the conventional tooth-anchored facemask (T group: mean age 9.3 ± 1.1 years, mean ANB: -0.93°) whereas the other 25 were treated using a miniscrew-anchored facemask (M group: mean age 9.7 ± 1.3 years. mean ANB: -1.61°). Two miniscrews were placed on the palate for bone anchorage. In both T and M groups, facemasks applied a force of 20-30° down on the occlusal plane, and the force increased from 200 g to 300-350 g per side throughout the treatments. The patients were instructed to wear facemasks for at least 14 h per day. A total of 16 angular and 11 linear cephalometric measurements were analysed to determine the skeletal and dental changes before and after facemask treatment. A paired t-test was used to verify the effects before and after treatment in each group. Results: All miniscrews were well maintained during treatment. The values of SNA, SN-ANS, ANB and A to N-Perp, which indicate anterior protraction of the maxilla, were significantly higher in the M group compared with the T group (P < .05). Proclination of the maxillary incisors, extrusion and mesialization of the maxillary molars were significantly greater in the T group (P < .05). Conclusions: Miniscrew-anchored facemask treatment increased the amount of maxillary protraction and reduced the dental side effects compared with conventional tooth-anchored facemask treatment in growing patients with skeletal Class III malocclusion.

Ischemic heart disease in patients with end-stage renal disease.

Why pebbles float to the surface

Cephalometric changes of pushing splints 3 compared to rapid maxillary expansion and facemask therapy on the airway space in class III growing patients: A randomized clinical trial

Skeletal and dento-alveolar changes obtained with customised and preformed eruption guidance appliances after 1-year treatment in early mixed dentition

Dentoskeletal effects of functional appliances vs bimaxillary surgery in hyperdivergent Class II patients

Evaluation of Maxillary Protraction Using a Mini Screw-Retained Palatal C-Shaped Plate and Face Mask

Class III malocclusions in deciduous or early mixed dentition: an early orthopaedic treatment

The efficacy of Hybrid Hyrax-Mentoplate combination in early Class III treatment: a novel approach and pilot study

Effects of eruption guidance appliance in the early treatment of Class III malocclusion

Cephalometric evaluation of changes in vertical dimension and molar position in adult non-extraction treatment with clear aligners and traditional fixed appliances

Treatment effects of the MARA appliance and Activator-Headgear combined with fixed appliances in Class II division 1 malocclusion patients: A retrospective longitudinal study

Dento-Skeletal Class III Treatment with Mixed Anchored Palatal Expander: A Systematic Review

Complementation of an Enterococcus hirae (Streptococcus faecalis) mutant in the alpha subunit of the H+‐ATPase by cloned genes from the same and different species

A simple equivalent circuit model for shielding analysis of magnetic sheets

Chromosome 7 short-arm interstitial deletion (p14)

Long-term skeletodental changes with early and late treatment using modified C-palatal plates in hyperdivergent Class II adolescents

Retrospective comparison of dental and skeletal effects in the treatment of Class II malocclusion between Herbst and Xbow appliances

Cephalometric changes in pharyngeal airway dimensions after functional treatment with twin block versus myobrace appliances in developing skeletal class II patients: a randomized clinical trial

Can contrast-enhanced ultrasonography characterize focal liver lesions and differentiate between benign and malignant, thus providing a one-stop imaging service for patients?().

Class III malocclusion treated with a 3D-printed hybrid hyrax distalizer combined with mentoplate using Alt-RAMEC protocol: A case report

Comparison of the skeletodental effects of miniscrew-anchored and tooth-anchored facemask treatment in growing patients with skeletal class III malocclusions