Abstract:Squeeze casting of biodegradable Mg-4Zn-0.5Ca-xMn (x = 0, 0.4 or 0.8 all in weight %) alloys is a process intended to improve mechanical properties (i.e., strength and ductility), corrosion performance (i.e., resistance), and biocompatibility (i.e., little to no cytotoxicity). In this study, we found that an increased Mn content causes the dendritic microstructure of squeeze-cast Mg-4Zn-0.5Ca-xMn to become more refined and uniform, while the volume fraction of the Ca2Mg6Zn3 phase simultaneously increases. Squeeze-cast Mg-4Zn-0.5Ca-0.8Mn presents the best yield strength, ultimate tensile strength, and elongation of the alloys tested. An electrochemical corrosion test in Hanks' solution at 36.5°C demonstrates that the corrosion resistance of squeeze-cast Mg-4Zn-0.5Ca-xMn alloys show improvement at higher Mn levels. Additionally, squeeze-cast Mg-4Zn-0.5Ca alloys containing Mn exhibit favorable biocompatibility, as evidenced by cell viability studies with MC3T3-E1 cells and a local lymph node assay test. Squeeze-cast alloy specimens implanted into the skull and spine of Sprague-Dawley rats for four weeks showed no serious cytotoxicity or foreign body response; however, swelling was observed in the implantation areas of Mn-free squeeze-cast Mg-4Zn-0.5Ca alloy, while no swelling was observed in rats implanted with Mn-containing Mg-4Zn-0.5Ca alloy. These findings indicate potential applications of biodegradable, Mn-containing, squeeze-cast Mg-4Zn-0.5Ca specimens in bone-reconstruction devices given their biocompatibility, mechanical properties, and degradation profiles. STATEMENT OF SIGNIFICANCE: Bioresorbable magnesium alloys have recently gained attention as viable biomaterials for skeletal reconstruction implants. Extensive research on biodegradable Mg alloy design, synthesis, and as-cast versus post-processed material properties useful for medical applications have been reported. The squeeze-casting technique used in this study can improve the mechanical properties (i.e., strengthening) and corrosive performance (reduced rate) of bioresorbable Mg-Zn-Ca-Mn alloys. Squeeze-casting of these alloys is also expected to improve specimen microstructure, near-net-shape manufacturing, and cost (i.e., reduced). This study provides an in vitro and in vivo assessment of squeeze-cast Mg-Zn-Ca-Mn alloys for biomedical applications.

Mechanical, corrosion and biological behavior of centrifugal casting processed Mg-2Zn-1Mn alloy reinforced with β Tricalciumphosphate (βTCP) for orthopaedic applications

Effect of β-TCP on the In Vitro Biocompatibility, Mechanical Properties, and Corrosion Resistance of Centrifugally Cast Mg–2Zn–1Mn Alloy for Orthopedic Implants

Micro-alloying of Zn and Ca in Vacuum Induction Casted Bioresorbable Mg System: Perspectives on Corrosion Resistance, Cytocompatibility, and Inflammatory Response

A novel multicomponent micro-alloyed magnesium for orthopaedic applications: a microstructural, mechanical, degradation and bioactivity study

Microstructure, Mechanical Properties and Bio-Corrosion Properties of Mg-Si(-Ca, Zn) Alloy for Biomedical Application

In Vitro Degradation and Electrochemical Corrosion Evaluations of Microarc Oxidized Pure Mg, Mg-Ca and Mg-Ca-Zn Alloys for Biomedical Applications

Corrosion Resistance and Cytocompatibility of Magnesium-Calcium Alloys Modified with Zinc- or Gallium-Doped Calcium Phosphate Coatings

Microstructure and in vitro degradation performance of Mg-Zn-Mn alloys for biomedical application

In Vitro and in Vivo Studies on As-Extruded Mg- 5.25Wt.%zn-0.6Wt.%ca Alloy As Biodegradable Metal

Microstructural Characterization and Mechanical Properties of Mg-Zr-Ca Alloys Prepared by Hot-Extrusion for Biomedical Applications

Biocorrosion and Cytotoxicity Studies on Biodegradable Mg-Based Multicomponent Alloys

Synthesis and Properties of Mg-Mn-Zn Alloys for Medical Applications

In Vitro and in Vivo Studies on Biomedical Magnesium Low-Alloying with Elements Gadolinium and Zinc for Orthopedic Implant Applications

In vitro and in vivo assessment of squeeze-cast Mg-Zn-Ca-Mn alloys for biomedical applications

Study of Microstructure and Corrosion Behavior of Cast Zn–Al–Mg Alloys

In Vitro Corrosion and Cytocompatibility of ZK60 Magnesium Alloy Coated with Hydroxyapatite by a Simple Chemical Conversion Process for Orthopedic Applications

In Vitro and in Vivo Studies on Pure Mg, Mg–1Ca and Mg–2Sr Alloys Processed by Equal Channel Angular Pressing

A homogenous microstructural Mg-based matrix model for orthopedic application with generating uniform and smooth corrosion product layer in Ringer's solution: Study on biodegradable behavior of Mg-Zn alloys prepared by powder metallurgy as a case

Effect of Mn Content on Microstructure, Mechanical Properties, and Corrosion Behavior of Mg-Zn-Gd-Y Alloy

Effect of Milling Parameters on Mechanical Properties and In Vitro Biocompatibility of Mg-Zn-Co Ternary Alloy

Mechanical properties and corrosion behavior of Mg-Gd-Ca-Zr alloys for medical applications