Novel polymer optical fibers with high mass-loading g-C3N4 embedded metamaterial porous structures achieve rapid micropollutant degradation in water

Zihang Cheng,Chii Shang,Paul Westerhoff,Li Ling

DOI: https://doi.org/10.1016/j.watres.2023.120234

2023-08-15

Abstract:The performance of conventional photocatalytic reactors suffers from low photocatalyst mass-loading densities affixed to surfaces and light scattering losses or light attenuation in slurry reactors. These limitations are overcome by fabrication of high mass-loading g-C3N4 embedded metamaterial porous structures on flexible polymeric optical fibers (g-C3N4-POFs). In this study, the fabricated g-C3N4-POFs contain g-C3N4 with mass-loading 100-1000x higher than previouly reported, enabling efficient light delivery to g-C3N4 and improved pollutant mass transport within metamaterial porous structures. The key fabrication step involved using acetone, based on its high saturated vapor pressure and low dielectric constant, making roll-to-roll mass production of high mass-loading photocatalyst-embedded metamaterial POFs possible at room-temperature within seconds. Using bundles of 150 individual g-C3N4-POFs in the reactors, we achieved 4x higher degradation rates for micropollutants under visible light irradiation at 420 nm compared with equivalent mass-to-volume ratios of photocatalysts in a slurry suspension reactor. The bundled g-C3N4-POF reactor showed no degradation in the structural integrity or loss of pollutant degradation using deionized or model drinking water under accumulated HO• exposures of ∼4.5 × 10-9 M•s after 20 cycles of treatment. It operates continuously at g-C3N4 dosages equivalent to 100-1000 g/L and a water depth over 40 cm, making it a feasible alternative to conventional photocatalytic reactors.