Walking Position Data in Football Training Based on Embedded Action Recognition System
Li Li
DOI: https://doi.org/10.1155/2022/4094025
2022-06-22
Mobile Information Systems
Abstract:With the development of image recognition and pattern recognition, action recognition has become a hot research direction in the field of computer actions. Because the embedded platform has the advantages of small size and low power consumption, it is a good choice to use the embedded platform for action recognition. These sensor data are used to overcome the drift error of the gyroscope when the positioning data are collected, and the accuracy and reliability of the data are improved. The system uses two data forwarding nodes to aggregate the data of each sensor and then transmit it to the host computer. The data aggregation node can communicate and upload data by means of Bluetooth or wire. In order to deeply study the relevance of the embedded action recognition system in collecting football training positioning data, this paper uses simulation model establishment method, data collection method, and theory and practice combination method to collect samples, analyzes the embedded action recognition system, and streamlines the algorithm. Using computer technology as a support when building a simulation model, the first thing you need to have is a certain computer technology because when building a simulation model, not all objects can be modeled. At this time, only computer technology can be used as a support to build a simulation model of some objects and create an action recognition system that can record the position data in football training. After establishing the human body simulation recognition model, use MATLAB to extract the K bone information. When collecting, the human body is facing the K device, the number of acquisition frames is 25, 55, 75, 95, 105, and 205, and each frame number is collected 10 times. Take the average. The delay time is 4s. The result shows that the 20 key bone point outputs by K come from the RGB camera on the same side. Further study the actual utility of the compensated model in the presence of occlusion. They are worn on the middle of the thigh and calf, respectively. In a sensor, the measured value of thigh length L1 is 0.6 m, and the value of calf length L2 is 0.4 m. Take the right knee as an example. When the leg is raised, the b-axis coordinate increases by 2%, and the c-axis coordinate decreases by 1.8%. When the leg is lowered, the opposite is true. It can be seen that the compensated coordinate is consistent with the action. It is basically realized that starting from the embedded action recognition system, a model that can support the analysis of football positioning data is designed.
computer science, information systems,telecommunications