Abstract:The ongoing development of hydrogen permeation alloys promotes the wide application of hydrogen energy, especially in the industry of hydrogen production from the water-gas shift reaction (WGS). However, before being widely used, it is still necessary to improve their comprehensive properties, such as hydrogen permeation flux and durability. Pd and its alloy membranes have been deeply studied and have appeared in the market in recent years. Vanadium-based alloys, as a new substitute for these palladium membranes, not only have lower cost but also higher hydrogen permeability. However, huge challenges remain-especially the poor mechanical stability and high susceptibility to hydrogen embrittlement (HE) which is closely related to high absorbed hydrogen concentration of Vanadium. To solve these problems, this paper investigated the structure, hydrogen diffusion, hydrogen dissolution, and hydrogen embrittlement properties of vanadium-based quaternary (V-Nb-Ti-Co) alloys. On this basis, the boundary of ductile brittle transition hydrogen concentration (DBTC) was described. It was found that new phases (such as Co 2 (V, Nb) 3 , Co 7 Nb 6 etc.) will be formed in the structure when V is gradually replaced by Nb. Accordingly, the above changes the gradual substitution of V by Nb increased the hydrogen diffusivity and decreased hydrogen absorption. The overall effect is that the permeability decreases first and then increases, but larger hydrogen absorption will weaken the mechanical strength. As a result, the DBTC of the V-Nb-Ti-Co alloys shifts to the right somewhat (about 0.36 (H/M)), expanding the gap of the V-based single-phase alloys. This work demonstrated that the lower limit of DBTC can be adjusted by adding an appropriate amount of Nb in V-based alloys, thus simultaneously increasing the hydrogen permeability and hydrogen embrittlement resistance. This provides help and guidance for the design of novel hydrogen purification alloys.

Atomic study of hydrogen behavior in different vanadium carbides

Diffusion and Retention of Hydrogen in Vanadium in Presence of Ti and Cr: First-principles Investigations

Effect of Ti/Cr Additive on Helium Diffusion and Segregation in Dilute Vanadium Alloys

Hydrogen Induced Hardening and Embrittlement of Vanadium Alloys

First-principles Study of Hydrogen Trapping and Diffusion Mechanisms in Vanadium Carbide with Connecting Carbon Vacancies

Study on the modification of Zr-Mn-V based alloys for hydrogen isotopes storage and delivery

First-principles insights onto the hydrogen trapping in interstitial-vacancy complexes in vanadium carbide

Hydrogen trapping in vanadium carbide alloyed with transition metals

Dissolution, diffusion and permeation behavior of hydrogen in vanadium: a first-principles investigation

First principle study of hydrogen behavior in hexagonal tungsten carbide

First-principles study on the dissolution and diffusion behavior of hydrogen in carbide precipitates

Microstructure, hydrogen permeability and ductile-to-brittle transition-hydrogen concentration of (V, Nb)-Ti-Co quaternary alloys

Hydrogen Storage Properties and Crystal Structure of Ti-Cr Based Alloys

First-principles calculations of transition elements interaction with hydrogen in vanadium

High-throughput Computing for Hydrogen Transport Properties in Ε-Zrh2

Hydrogen storage of high entropy alloy NbTiVZr and its effect on mechanical properties: A first-principles study

Effects of Monovacancy and Divacancies on Hydrogen Solubility, Trapping and Diffusion Behaviors in fcc-Pd by First Principles

Experimental and theoretical insights into vanadium-based alloys for room temperature hydrogen storage on the example of Ti16Cr22Zr5V55-Fe2Mn (x=0–3) alloys

First-principles studies of behavior of hydrogen and mechanical properties of TiCrTaV high-entropy alloys

Hydrogen trapping and embrittlement of titanium- and vanadium carbide-containing steels after high-temperature hydrogen charging

Hydrogen interaction with vacancy defects in tungsten: Unraveling the influence on diffusion mechanisms and mechanical properties