Orthopaedic training and education in Australia.

T. Taylor

DOI: https://doi.org/10.1111/J.1445-2197.1992.TB05348.X

Australian and New Zealand Journal of Surgery

Abstract:

What problem does this paper attempt to address?

Spherical Cu2O-Fe3O4@chitosan bifunctional catalyst for coupled Cr-organic complex oxidation and Cr(VI) capture-reduction

Chensi Shen,Hao Li,Yuezhong Wen,Feng Zhao,Yaopeng Zhang,Deli Wu,Yanbiao Liu,Fang Li

DOI: https://doi.org/10.1016/j.cej.2019.123105

IF: 15.1

2020-01-01

Chemical Engineering Journal

Abstract:Unlike the removal of chromium (Cr) ions, the efficient treatment of Cr complexes with organic ligands is a challenging issue in wastewater treatment. The generation and accumulation of highly toxic Cr(VI) species should be minimized. In this study, well-dispersed Cu2O and Fe3O4 nanoparticles inlaid in chitosan beads were prepared. This catalyst demonstrated dual functions, i.e., catalytic oxidation of Cr(III)-organic complexes and efficient inhibition of Cr(VI) accumulation in the presence of H2O2. More than 85% of the Cr(III)-organic complexes were removed in a wide pH range and a negligible amount of Cr(VI) remained in solution in the presence of 20 mmol/L H2O2. The synergistic effect of Cu2O, Fe3O4, and the chitosan matrix was the key factor for the ligand disruption and Cr removal. X-ray photoelectron spectroscopy (XPS) and electron spin resonance (ESR) analysis were used to determine the underlying mechanism. The results showed that the generated Cu+ species of Cu2O transferred electrons to accelerate the Fe(III)/Fe(II) cycle during the Fenton reaction, which favored the production of center dot OH radicals. The generated Cr(VI) in the Fenton-like reaction was efficiently adsorbed by chitosan and reduced to Cr(III) by chitosan and Cu2O. The reduced Cr(III) was then incorporated into the surface structure of Fe3O4 and generated a stable complex oxides of Fe and Cr(III). Overall, this paper demonstrated a new method for the treatment of Cr(III)-organic complexes from wastewater.
Boosting peroxymonosulfate activation via Fe–Cu bimetallic hollow nanoreactor derived from copper smelting slag for efficient degradation of organics: The dual role of Cu

Cuirong Yan,Xiunan Cai,Xintao Zhou,Zhongqiu Luo,Jiguang Deng,Xincong Tian,Jinyu Shi,Wenhao Li,Yongming Luo

DOI: https://doi.org/10.1016/j.jcis.2024.08.203

IF: 9.9

2024-09-03

Journal of Colloid and Interface Science

Abstract:Valorization of iron-rich metallurgical slags in the construction of Fenton-like catalysts has an appealing potential from the perspective of sustainable development. For the first time, copper smelting slag (CSS) was utilized as the precursor to synthesize hollow sea urchin-like Fe–Cu nanoreactors (Cu 1.5 Fe 1 Si) to activate peroxymonosulfate (PMS) for chlortetracycline hydrochloride (CTC) degradation. The hyper-channels and nano-sized cavities were formed in the catalysts owing to the induction and modification of Cu, not only promoting the in-situ growth of silicates and the formation of cavities due to the etching of SiO 2 microspheres, but also resulting the generation of nanotubes through the distortion and rotation of the nanosheets. It was found that 100 % CTC degradation rate can be achieved within 10 min for Cu 1.5 Fe 1 Si, 75 times higher than that of Cu 0 Fe 1 Si (0.0024 up to 0.18 M −1 ‧min −1 ). The unique nanoconfined microenvironment structure could enrich reactants in the catalyst cavities, prolong the residence time of molecules, and increase the utilization efficiency of active species. Density functional theory (DFT) calculations show that Cu 1.5 Fe 1 Si has strong adsorption energy and excellent electron transport capacity for PMS, and Fe-Fe sites are mainly responsible for the activation of PMS, while Cu assists in accelerating the Fe(II)/Fe(III) cycle and promotes the catalytic efficiency. The excellent mineralization rate (83.32 % within 10 min) and efficient treatment of CTC in consecutive trials corroborated the high activity and stability of the Cu 1.5 Fe 1 Si. This work provides a new idea for the rational design of solid waste-based eco-friendly functional materials, aiming at consolidating their practical application in advanced wastewater treatment.

chemistry, physical
Enhanced Fenton-like catalysis via interfacial regulation of g-C3N4 for efficient aromatic organic pollutant degradation

Bin Zhou,Qingsong Liu,Caihong Zheng,Yao Ge,Lili Huang,Haoyang Fu,Shengqiong Fang

DOI: https://doi.org/10.1016/j.envpol.2024.124341

2024-09-01

Abstract:For the efficient degradation of organic pollutants with the goal of reducing the water environment pollution, we employed an alkaline hydrothermal treatment on primeval g-C3N4 to synthesize a hydroxyl-grafted g-C3N4 (CN-0.5) material, from which we engineered a novel Fenton-like catalyst, known as Cu-CN-0.5. The introduction of numerous hydroxyl functional groups allowed the CN-0.5 substrate to stably fix active copper oxide particles through surface complexation, resulting in a low Cu leaching rate during a Cu-CN-0.5 Fenton-like process. A sequence of characterization techniques and theoretical calculations uncovered that interfacial complexation induced charge redistribution on the Cu-CN-0.5 surface. Specifically, some of the π electrons in the tris-s-triazine units were transferred to the copper oxide particles along the newly formed chemical bonds (C(π)-O-Cu), forming a π-deficient area on the tris-s-triazine plane near the complexation site. In a typical Cu-CN-0.5 Fenton-like process, a stable π-π interaction was established due to the favorable positive-negative match of electrostatic potential between the aromatic pollutants and π-deficient areas, leading to a significant improvement in Cu-CN-0.5's adsorption capacity for aromatic pollutants. Furthermore, pollutants also delivered electrons to the Cu-CN-0.5 Fenton-like system via a "through-space" approach, which suppressed the futile oxidation of H2O2 in reducing the high-valent Cu2+ and significantly improved the generation efficiency of •OH with high oxidative capacity. As expected, Cu-CN-0.5 not only exhibited an efficient Fenton degradation for several typical aromatic organic pollutants, but also demonstrated both a low metal leaching rate (0.12 mg/L) and a H2O2 utilization rate exceeding 80%. The distinctive Fenton degradation mechanism substantiated the potential of the as-prepared material for effective wastewater treatment applications.
MOF-derived Three-Dimensional Flower-Like FeCu@C Composite As an Efficient Fenton-like Catalyst for Sulfamethazine Degradation

Juntao Tang,Jianlong Wang

DOI: https://doi.org/10.1016/j.cej.2019.122007

IF: 15.1

2019-01-01

Chemical Engineering Journal

Abstract:In this paper, a novel three-dimensional flower-like Fenton-like catalyst with iron-copper bimetallic NPs within the mesoporous carbon shell (FeCu@C) was successfully prepared through a simple pyrolysis of a [Fe,Cu]-BDC precursor and applied for catalytic degradation of sulfamethazine (SMT) in the presence of H2O2. The FeCu@C catalyst showed a 100% SMT removal within 90 min and a 72.3% total organic carbon (TOC) conversion within 240 min under the conditions of 20 mg L-1 SMT, 0.25 g L-1 FeCu@C, 1.5 mM H2O2, and initial solution pH 3.0. Combined with the characterization results, we proposed that the unique structure and composition of FeCu@C enable the catalyst to exhibit outstanding adsorption capability and catalytic performance in SMT degradation by H2O2 activation. The porous flower-like carbon matrix not only favors the rapid diffusion of reactants towards the internal bimetallic nanoparticles (NPs), but also offers specific adsorption for the enrichment of SMT molecules from bulk solution through pi - pi interaction. In addition, the iron and copper species existing in the inner bimetallic NPs are available active sites for a Fenton reaction, and a possible synergistic effect between them could facilitate the generation of additional center dot OH radicals to enhance SMT degradation. Moreover, the accumulation (i.e. adsorption) of SMT molecules on the surface of FeCu@C could increase their contact probability with the center dot OH radicals generated from H2O2 decomposition, further enhancing the reaction efficiency. With its high-magnetization properties, FeCu@C can be magnetically recovered and reused in SMT degradation. Furthermore, the possible reaction mechanism of the FeCu@C/H2O2 system and SMT degradation pathways were also tentatively proposed.
Mechanism study on a novel Cu/Fe co-catalyzed heterogeneous particle mediated activation of hydrogen peroxide for efficient degradation of cyanides

Xiuping Chen,Ting Zhang,Guangfei Qu,Yuanchuan Ren,Zuoliang Wang,Jun Wang,Ping Lu,Minhua Cheng,Xiaomei Chu

DOI: https://doi.org/10.1016/j.jwpe.2023.104414

IF: 7

2023-11-02

Journal of Water Process Engineering

Abstract:The degradation of cyanide ions in cyanide containing wastewater is a major challenge in water treatment. This article uses a one-step hydrothermal method to prepare iron copper bimetallic oxide catalysts and applies them for the rapid degradation of cyanide (CN − ). The experimental results show that under the optimal conditions, the removal rate of CN − in the bimetallic catalyst/H 2 O 2 system is close to 100 % within 1 h, which is significantly better than the single metal oxide catalyst. Through characterization by SEM-EDS, XRD, XPS, and combined with catalytic performance experimental analysis, it was found that. There is a synergistic effect between Cu and Fe, which can effectively promote the cycling of metal ions and improve the generation efficiency of hydroxyl radicals (HO • ) to a certain extent, thereby improving the degradation performance of CN − . In addition, ion chromatography was used to analyze the oxidation products and a possible pathway for CN − degradation was proposed. This provides new insights and ideas for the development of high-performance bimetallic oxide catalysts for cyanide degradation.

engineering, chemical, environmental,water resources
Enhanced sulfamethazine degradation via peroxydisulfate activation by biochar-supported nano zero-valent iron-copper: The key role of Fe(IV) and electron transfer induced by doped Cu

Wenbo Xu,Danlian Huang,Guangfu Wang,Sai Li,Li Du,Wei Zhou,Hai Huang

DOI: https://doi.org/10.1016/j.jclepro.2023.140133

IF: 11.1

2023-12-23

Journal of Cleaner Production

Abstract:The effective treatment of antibiotic wastewater is necessary to the cleaner production of many industries. Herein, a novel catalyst of biochar-supported nano zero-valent iron-copper (nZVI/Cu@BC) was synthesized, which showed more efficient activation of peroxydisulfate (PDS) for sulfamethazine (SMZ) degradation than the catalyst before nZVC doping, from 77.81% to 96.44%. And it was found to be mainly owing to the role of Fe(IV) and electron transfer induced by doped Cu. Specifically speaking, the doped Cu caused over an order of magnitude increase in Fe(IV) formation from 1.84×10 −10 M to 4.75 × 10 −9 M. And the more significant electron transfer between nZVI/Cu@BC, PDS and SMZ was confirmed by series electrochemical tests. In contrast, the formation of SO 4 ·- and OH was still at a low concentration, playing a small role. The different activation mechanisms were identified to be that doped Cu provided Cu(I)/Cu(II) cycle to accelerate Fe(II)/Fe(III) cycle for enhanced PDS activation. Besides, the Fe 0 /Cu 0 co-active sites appeared on the material surface after nZVC doping, exhibiting a stronger interaction with PDS. Therefore, nZVI/Cu@BC performed better under a wider pH range as well as complex water environment, and eliminated the toxicity of SMZ due to the nonradical-dominant process. This work provides a new insight into the rational design of nano zero-valent metals for efficient wastewater treatment to ensure cleaner production.

environmental sciences,green & sustainable science & technology,engineering, environmental
Doping Sb into CuFe2O4 Improved the Catalytic Performance in the Electrochemically Enhanced Homogeneous Peroxymonosulfate-Heterogeneous Catalytic System for the Degradation of Ciprofloxacin

Sha Yu,Qianyu Zhang,Xiaoqin Sun,Shuangli Chen,Jieli Tang,Jun-Jie Zhu,Yuan Dang

DOI: https://doi.org/10.1016/j.jece.2022.108335

IF: 7.7

2022-01-01

Journal of Environmental Chemical Engineering

Abstract:In this study, the electrochemically enhanced homogeneous-heterogeneous catalytic system (EC/Sb-CuFe2O4/ PMS and EC/Sn-CuFe2O4/PMS) was constructed by placing the heterogeneous CuFe2O4-based catalyst in parallel between the anode and the cathode, which was applied to activate PMS to remove cipmfloxacin (CIP). Sb and Sn were doped into CuFe2O4 nanosheets to improve its intrinsic catalytic performance. Under the optimal conditions (3.5 mM PMS, the catalyst area of 4 x 5 cm(2), natural pH and the current density of 15 mA/cm(2)), 90.3 % of CIP was removed by the proposed EC/Sb-CuFe2O4 /PMS system, which was much higher than that of the EC/CuFe2O4/PMS (71.56 %) and EC/Sn-CuFe2O4/PMS (77.71 %) systems. The enhanced degradation performance of EC/Sb-CuFe2O4/PMS system was mainly due to the increased species and content of low-valence metal ions (beneficial to the activation reaction of PMS) and the rougher surface for the sufficient contact between the SbCuFe2O4 heterogeneous catalyst and the homogeneous PMS, which in return promoted the activation of PMS and generated more center dot OH and SO4 for the degradation of CIP. The generated intermediates in the degradation process were analyzed and the possible degradation pathways were proposed. The developed EC/Sb-CuFe2O4/PMS system was a potential candidate for the degradation of CIP in the environment. In addition, improving the catalytic performance of heterogeneous spinet catalysts by moderate doping also provided new opportunities to develop more efficient catalytic materials.
A novel electrocatalytic filtration system with carbon nanotube supported nanoscale zerovalent copper toward ultrafast oxidation of organic pollutants

Wentian Zheng,Yanbiao Liu,Wen Liu,Haodong Ji,Fang Li,Chensi Shen,Xiaofeng Fang,Xiang Li,Xiaoguang Duan

DOI: https://doi.org/10.1016/j.watres.2021.116961

IF: 12.8

2021-04-01

Water Research

Abstract:In this study, we designed an integrated electrochemical filtration system for catalytic activation of peroxymonosulfate (PMS) and degradation of aqueous microcontaminants. Composites of carbon nanotube (CNT) and nanoscale zero valence copper (nZVC) were developed to serve as high-performance catalysts, electrode and filtration media simultaneously. We observed both radical and nonradical reaction pathways, which collectively contributed to the degradation of model pollutants. Congo red was completely removed via a single-pass through the nZVC-CNT filter (τ <2 sec) at neutral pH. The rapid kinetics of Congo red degradation were maintained across a wide pH range (from 3.0-7.0), in complicated matrixes (e.g., tap water and lake water), and for the degradation of a wide array of persistent organic contaminants. The superior activity of nZVC-CNT stems from the boosted redox cycles of Cu2+/Cu+ in the presence of an external electric field. The flow-through design remarkably outperformed the conventional batch system due to the convection-enhanced mass transport. Mechanism studies suggested that the carbonyl group and electrophilic oxygen of CNT served as electron donor and electron acceptor, respectively, to activate PMS to generate •OH and 1O2 via one-electron transport. The electron-deficient Cu atoms are prone to react with PMS via surface hydroxyl group to produce reactive intermediates (Cu2+-O-O-SO3−), and then 1O2 will be generated by breaking the coordination bond of the metastable intermediate. The study will provide a green strategy for the remediation of organic pollution by a highly efficient and integrated system based on catalytic oxidation, electrochemistry, and nano-filtration techniques.

environmental sciences,engineering, environmental,water resources
Boosting the activation of Peroxymonosulfate and the degradation of metronidazole over FeCo2O4 quantum dots anchored on β-FeOOH Nanosheets: Inspired from octahedral Co(II) with missing angle

Hejun Ren,Hongwei Liu,Tingchen Cui,Shuai Liu,Taigang Ma,Zhonghui Han,Rui Zhou

DOI: https://doi.org/10.1016/j.cej.2021.133803

IF: 15.1

2022-03-01

Chemical Engineering Journal

Abstract:Peroxymonosulfate (PMS) activation by bimetallic Co/Fe oxides, especially spinel FeCo2O4, is a promising way in decontaminating organic pollutants in wastewaters. However, it suffers from low efficiency and the intrinsic catalytic mechanisms are still poorly understood. Therefore, we applied lattice VOs (oxygen vacancies) adjustment strategy to construct a octahedral Co(II)–enriched FeCo2O4 quantum dots anchored on β-FeOOH nanosheets composite (Co(II)-FCQDs/FNS) for boosting PMS activation during the degradation of Metronidazole (MNZ), and pure FeCo2O4 quantum dots (FCQDs) was studied as a comparison. As a result, in PMS/Co(II)-FCQDs/FNS system, 5–30 mg·L−1 MNZ could be completely degraded within 5 min with the usage of 0.05 g·L−1 catalyst, and the degradation efficiency of 100 mg·L−1 MNZ reached 99.92% within 40 min with the PMS utilization of 62.90% at the same condition, whose degradation rate constant was 6.45 times than that of the FCQDs/PMS system. The electron paramagnetic resonance (EPR) and quenching experiments indicated that PMS /Co(II)-FCQDs/FNS system was a pure radical-based (sulfate radicals (SO4 •−), hydroxyl radicals (•OH) and superoxide radical (O2 •−) oxidation process. Density functional theory (DFT) calculation revealed that the generation of octahedral Co(II) derived from oxygen vacancies, improved the charge transfer in the spinel lattice while providing a new electron transfer channel from lattice Co(II)/Fe(II) to the surface of FeCo2O4. Simultaneously, strengthened the surface adsorption of HSO5 − and increased the number of unpaired electrons, thus boosting the PMS activation performance. In addition, the influence of reaction parameters and water matrix were investigated. Finally, the degradation pathway of MNZ was proposed and the toxicity of intermediates was also assessed. This work is expected to facilitate the design and application of PMS/Co(II)-FCQDs/FNS system for decontaminating organic pollutants from wastewater.

engineering, chemical, environmental
Characteristics of Fe/C catalysts based on pyrolysis of ferric citrate and its peroxymonosulfate activation performance to degrade sulfadiazine in water

Baowei Zhao,Jiani Yang

DOI: https://doi.org/10.1039/d4ra00768a

IF: 4.036

2024-05-15

RSC Advances

Abstract:Advanced oxidation techniques based on peroxysulfate activation have been paid much attention owing to their excellent performance in degrading stubborn pollutants in water. In response to the current situation that requires more raw materials and higher costs and involves more complicated processes for the preparation of Fe/C catalysts to activate persulfates, novel catalysts (Fe/C-700, Fe/C-800, Fe/C-900 and Fe/C-1000) were prepared by a high-temperature carbonization method at different pyrolysis temperatures (700, 800, 900 and 1000 °C) using inexpensive and environmentally friendly ferric citrate as raw material. Fe/C catalysts were characterized using SEM, EDS, XRD, XPS, and VSM and were screened for the activation of peroxymonosulfate (PMS) to degrade sulfadiazine (SDZ) in water, where Fe/C-900 exhibited higher efficiency. Thus, its activation performance for PMS to degrade SDZ was comprehensively investigated and the mechanisms of activation degradation were analyzed. The results showed that the degradation rate of 98.7% can be achieved to 10 mg L −1 SDZ by 0.1 g L −1 Fe/C-900 and 0.5 mmol L −1 PMS within 60 min. A wide range of solution pH, low catalyst dosage and good recycling performance were found in the Fe/C-900 application and the amount of iron ions dissolved at the end of the reaction was low (0.350 mg L −1 ). It was shown that both free radical and non-free radical pathways existed in the reaction system, where 1 O 2 , SO 4 − ̇ and O 2 − ̇ played dominant roles in the degradation process of SDZ. The results could provide new ideas for the preparation of Fe/C catalysts and their heterogeneous activation for PMS to degrade stubborn organic pollutants in water.

chemistry, multidisciplinary
Core-shell structured Fe 0 /Mn 0 @Fe/Mn oxides bimetallic nanocomposites as novel heterogeneous electro-Fenton catalysts for methylene blue removal

Liangqian Fan,Xianda Wang,Jiaxin Miao,Jie Cai,Fenghui Chen,Wei Chen,Hongbing Luo,Lin Cheng,Xiaochan An,Xiaoxiao Zhang,Ke Zhang,Dandan Ma

DOI: https://doi.org/10.1016/j.molliq.2023.122069

IF: 6

2023-05-18

Journal of Molecular Liquids

Abstract:Zero-valent iron (Fe 0 ) is a promising catalyst for the heterogeneous electro-Fenton (EF) process. However, for practical application of Fe 0 , there are some problems such as the Fe 2+ /Fe 3+ cycle is not fast enough, the leaching stability is poor, and F 0 is easy to be oxidized. Herein, to overcome the defects, core–shell structured Fe 0 /Mn 0 @Fe/Mn oxides bimetallic nanocomposites (C-nZVIM) were developed, which were used as novel heterogeneous EF catalysts for treating MB-containing wastewater to explore their catalytic effect and mechanism. Results indicated that the suitable Mn/Fe mass ratio for the preparation of C-nZVIM was 3:1. C-nZVIM had a core–shell structure with an Fe 0 /Mn 0 core surrounded by an Fe/Mn oxides shell. C-nZVIM could be applied to the heterogeneous EF process over a wide range of initial pH (2.5–8) with high MB removal efficiencies (96.75 %–81.97 %). Mn doped in C-nZVIM promoted the Fe 2+ /Fe 3+ cycle and enhanced •OH generation. Considerable MB mineralization (62.3 % at 150 min and 71.2 % at 300 min) was gained due to •OH. The application of C-nZVIM in the heterogeneous EF process for MB removal achieved a low total leaching of Fe and Mn and desirable catalytic effect. This work offered a novel efficient and stable catalyst for the heterogeneous EF process and provided accurate guidance for its application.

chemistry, physical,physics, atomic, molecular & chemical
Octahedron of zero-valent and mono-valent copper anchored on nitrogen doping porous carbon to enhance heterogeneous electro-Fenton like activity

Yueqin Lv,Yaru Liu,Yuan Meng,Wenwen Zheng,Yi Li,He Zhang,Sihui Zhan,Wenping Hu,Yueqin Lv,Yaru Liu,Yuan Meng,Wenwen Zheng,Yi Li,He Zhang,Sihui Zhan,Wenping Hu

DOI: https://doi.org/10.1016/j.jwpe.2022.102803

IF: 7

2022-06-01

Journal of Water Process Engineering

Abstract:The development of integrated porous carbon materials based on transition metal oxides for used as catalysts with high efficiency and robust advantages in heterogeneous electro-Fenton like (EF-like) reaction were supposed to be widely used in effectual removing refractory sewage. Herein, an octahedral composite material of Cu+/Cu0 anchored on nitrogen doping porous carbon (Cu+/Cu0-NC-800) was designed. The regulated Cu+/Cu0-NC-800 catalyst was efficient for the catalytic oxidation of ciprofloxacin via heterogeneous EF-like reaction, and the degradation efficiency was almost 100% in 120 min with outstanding cyclic stability. Compared to irregular Cu+/Cu0-C-800, the regular octahedral structure of Cu+/Cu0-NC-800 catalyst was beneficial to exposing more active sites. The excellent redox and electronic transmission capability benefited from the synergistic effect of doped nitrogen and polyvalent copper. What's more, with the assistance of nitrogen doping sites and polyvalent copper (Cu0, Cu+ and Cu2+) redox reaction, the directional decomposition of H2O2 into hydroxide radical and superoxide radical was realized, consequently boosting the performance in heterogeneous EF-like reaction. Our discovery greatly advanced the practical application value in wastewater treatment.

engineering, chemical, environmental,water resources
CoFe 2 O 4 /MWCNTs as peroxymonosulfate activator for sulfadiazine degradation in wastewater: Performance, mechanisms, degradation pathway, and products toxicity assessment

Junyuan Guo,Yihua Chen,Wenjing Chen,Ziyi Chen,Fengyuan Gao,Jin Wang,Yuting Fu

DOI: https://doi.org/10.1016/j.jallcom.2023.170868

IF: 6.2

2023-06-12

Journal of Alloys and Compounds

Abstract:Bimetal oxide-based compounds have potential in the degradation of antibiotics in wastewater. In this study, cobalt-ferrite-coated multi-walled carbon nanotubes (CoFe 2 O 4 /MWCNTs) have been synthesized by solvothermal method and characterized. Then, the degradation of sulfadiazine (SDZ) by CoFe 2 O 4 /MWCNTs activated peroxymonosulfate (PMS) system was determined, mainly including the effects of CoFe 2 O 4 /MWCNTs dosage, PMS concentration, solution pH, initial SDZ concentration, and co-existing anions on the degradation of SDZ. Based on reactive oxygen species identification and XPS analysis, the possible reaction mechanisms were investigated. In addition, the potential degradation pathways of SDZ were discussed. The results showed that CoFe 2 O 4 /MWCNTs exhibited superior catalytic activity and stability toward SDZ removal, and 97.5% of SDZ was degraded within 30 min under the condition of CoFe 2 O 4 /MWCNTs dosage 0.3 g/L, PMS concentration 0.5 mM and solution pH 7. The possible mechanism of PMS activation by CoFe 2 O 4 /MWCNTs involved both free-radical and non-radical pathways, and the generated reactive species (SO 4 •− , • OH, O 2 •− and 1 O 2 ) were responsible for the degradation of SDZ. In addition, four potential degradation pathways were proposed and 15 intermediates were identified. In view of the ecotoxicity assessment, it was found that the toxicity of the degradation intermediates was lower than that of SDZ. Overall, this study established an effective strategy for PMS activation to remove recalcitrant organic pollutants in wastewater.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Efficient Removal of Organic Contaminants in CuS-Mediated Solid-Liquid-Interfacial Fenton-Like System: Role of Bimetallic Cycle and Sulfur Species

Zhu Wang,Kunjie Hou,Fei Chen,Shanshan Zhang,Zhoujie Pi,Li He,Shengjie Chen,Xiaoming Li,Qi Yang

DOI: https://doi.org/10.1016/j.jhazmat.2023.131103

IF: 13.6

2023-03-01

Journal of Hazardous Materials

Abstract:The conventional Fenton-like system (Fe(III)/H 2 O 2 ) is severely limited by the inferior activity of Fe(III) on H 2 O 2 activation to produce highly active species and the sluggish regeneration rate of Fe(II). This work significantly enhanced the oxidative breakdown of the target organic contaminant bisphenol A (BPA) by Fe(III)/H 2 O 2 by introducing cheap CuS at a low dose of 50 mg/L. The BPA removal (20 mg/L) in CuS/Fe(III)/H 2 O 2 system reached 89.5% within 30 min under the optimal conditions: CuS dosage 50 mg/L, Fe(III) concentration 0.05 mM, H 2 O 2 concentration 0.5 mM and pH 5.6. Compared to CuS/H 2 O 2 and Fe(III)/H 2 O 2 systems, the reaction constants had a 47- and 12.3-fold enhancement, respectively. Even compared with the conventional Fe(II)/H 2 O 2 system, the kinetic constant also increased more than twice, further confirming the distinctive superiority of constructed system. Element species change analyses showed that Fe(III) in solution was adsorbed onto the CuS surface, and then Fe(III) was rapidly reduced by Cu(I) in the CuS lattice. Combining CuS and Fe(III) (in-situ formed CuS-Fe(III) composite) created a robust co-effect on the activation of H 2 O 2 . Also, S(-II) and its derivatives, e.g., S n 2- and S 0 (as an electron donor), could quickly reduce Cu(II) to Cu(I) and ultimately oxidize to the harmless product SO 4 2- . Notably, a mere 50 μM of Fe(III) was sufficient to maintain enough regenerated Fe(II) to effectively activate H 2 O 2 in CuS/Fe(III)/H 2 O 2 system. In addition, such a system achieved a broad range of pH applications and was more suitable for real wastewater containing anions and natural organic matter. Scavenging tests, electron paramagnetic resonance (EPR), and probes further verified the critical role of •OH. This work provides a new approach to solving the problems of Fenton systems through a solid-liquid-interfacial system design and exhibits considerable application potential in wastewater decontamination.

environmental sciences,engineering, environmental
In-situ synthesis of N-doped biochar encapsulated Cu(0) nanoparticles with excellent Fenton-like catalytic performance and good environmental stability

Chaogang Yu,Ruoyi Huang,Yuxue Xie,Yunxiang Wang,Yizhang Cong,Long Chen,Liu Feng,Qingyang Du,Wuzhu Sun,Haibin Sun

DOI: https://doi.org/10.1016/j.seppur.2022.121334

IF: 8.6

2022-08-15

Separation and Purification Technology

Abstract:Low-valent transition metal catalysts show promising application in the catalytic degradation of organic pollutants in wastewater. However, the catalysts themselves are susceptible to be oxidized and easy to agglomerate, thus reducing the catalytic ability. Herein, a facile in-situ carbonization method is utilized to synthesize N-doped biochar encapsulated zero valent copper (Cu(0)) nanoparticles (Cu@N: C). The formed Cu(0) nanoparticles are uniformly dispersed in biochar. The carbon layers wrapped outside of Cu(0) nanoparticles can present the oxidation of Cu(0) to a certain extent. Therefore, the 12% Cu@N: C catalyst exhibits good environmental stability. The catalytic ability remains basically unchanged after directly exposing it to air for four months. In addition, the 12% Cu@N: C catalyst exhibits excellent catalytic performances for the degradation of various organic pollutants at near neutral pH range (pH = 4.0 ∼ 8.0). Low valent copper (Cu(0)/Cu(I)) and pyridinic N both contribute to the excellent catalytic ability. Furthermore, the catalytic performances are less interfered in natural water matrices, and even obviously enhanced in sea water. Based on the experimental and characterization results, a possible catalytic mechanism is also proposed.

engineering, chemical
Modulating electronic structure of Fe site by adjacent Cu site through orbital coupling in Cu-Fe 2 O 3 catalyst derived from Fenton sludge quenching

Aihua Xu,Runshi Chen,Aimal Khan,Wenpei Zhao,Jiajin Lin,Rongrong Hu,Wei Li,Xiuying Liu,Xiaoxia Li,Shuaiqi Zhao

DOI: https://doi.org/10.1016/j.cej.2024.152489

IF: 15.1

2024-05-26

Chemical Engineering Journal

Abstract:The incorporation of specific atoms into catalysts derived from Fenton sludge has the potential to regulate active site for promoting peroxymonosulfate (PMS) activation. Here, quenching technology was employed in this study to facilitate the production of a highly active Fe 2 O 3 -based catalyst from Fenton sludge. In this process, Cu atoms effectively substituted Fe atoms and regulated the local electronic structure of neighbouring Fe sites, thereby enhancing the catalytic performance in PMS activation for the degradation of Levofloxacin (LEVO) in wastewater. The strong orbital coupling between Fe and Cu, as confirmed by comprehensive characterization and density functional theory (DFT), facilitated the delocalization of d-orbital electrons, thereby enabling efficient electron transfer and redox cycling of Cu 2+ /Cu + and Fe 3+ /Fe 2+ . This allowed degradation reaction to proceed continuously. The present study will offer a novel approach to the design of Fenton sludge derived catalysts, thereby expanding the utilization of quenching chemistry in solid waste recycling.

engineering, chemical, environmental
A novel bifunctional particle electrode with abundant Fe/Fe 3 C and Fe-N-C sites to enhance the performance of electro- in degrading organic pollutant

Junjie Cheng,Xinman Tu,Li Zhang,Mingzhu Han,Rentao Zhou,Shaohua Luo,Honghu Zeng,Tingting Li,Jianping Zou

DOI: https://doi.org/10.1016/j.jece.2024.112902

IF: 7.7

2024-05-02

Journal of Environmental Chemical Engineering

Abstract:Electro-Fenton (EF) technology emerges as a promising approach to address the treatment of persistent organic pollutants. Nevertheless, its practical implementation often comes with certain drawbacks, like the low H 2 O 2 activation efficiency, poor pH adaptability, and difficult recycling of the catalysts. To this end, we introduced highly active Fe-N-C sites onto the surface of nitrogen-doped graphene, improved the chemical environment of its central Fe atoms with Fe/Fe 3 C nanoparticles, effectively regulated the multi-electron oxygen reduction process of the catalyst in the electrochemical reaction, and realized the efficient production and activation of H 2 O 2 in the electro-Fenton process. The synthesized Fe/Fe 3 C@FeNG-1000 achieved efficient removal of refractory organic pollutants in neutral conditions. The rate constant of degradation for tetracycline hydrochloride (TC) in the electro-Fenton reaction system at pH 7 was recorded as 0.1011 min −1 . Additionally, a removal rate of 67.4% for total organic carbon (TOC) was achieved in just 120 min. The treatment of actual wastewater also showed excellent performance, with an average specific energy consumption of 6.16 kWh kg −1 COD −1 . Fe/Fe 3 C@FeNG-1000 can still achieve more than 90% degradation efficiency after 5 consecutive cycles of the experiment, showing excellent stability, and the catalyst can be conveniently retrieved via magnetic methods following the reaction. The results show that the Fe/Fe 3 C@FeNG-1000-EF system has a wide range of pH applicability, long-term stability and good recyclability, has a good application value in practical wastewater treatment.

engineering, chemical, environmental
Nitrogen-doped iron carbide composites for activating peroxymonosulfate to degrade sulfonamides

Qinwei Lu,Jian Lu,Yi Zhou,Yanbo Zhou

DOI: https://doi.org/10.1016/j.seppur.2024.130458

IF: 8.6

2024-11-13

Separation and Purification Technology

Abstract:Advanced oxidation technology based on persulfate can efficiently remove trace pollutants in water, but there are problems with poor electronic cycling efficiency and metal leaching. In this work, we successfully fabricated in-situ nitrogen doped biochar composite material Fe 3 C/C by chelating Fe 2+ ions with chitosan and carbonizing the precursor. The main active component of Fe 3 C/C was Fe 3 C, and nitrogen doping and biochar structure promoted the cycling of Fe 2+ /Fe 3+ . The catalyst Fe 3 C/C exhibits excellent synergistic "adsorption-oxidation" ability, and the removal efficiency of sulfonamide (SA) can reach 80 % (k = 0.1793 min −1 ). The degradation kinetics, free radical chemistry, and characterization were combined to investigate the synergistic effect of Fe 3 C and carbon substrate on the generation of persistent free radicals. Fe 3 C/C is not only an electron donor, but also an electron acceptor and electron transfer carrier. In the Fe 3 C/C/PMS system, free radical and non-free radical pathways coexist, which makes it suitable for the treatment of various pollutants in complex water matrices. The contribution of defects and pyrrole nitrogen constitutes the synergistic degradation process of free and non-free radicals. In addition, Fe 3 C/C-3 showed good continuous processing ability and less iron dissolution in the packed column experiment. This work provides theoretical support and technical means for the efficient removal of trace pollutants in water by biochar-based advanced oxidation technology.

engineering, chemical
Cu Quantum Dots Anchored Core-Shell Submicrosphere Catalyst for Electro-Enhanced Degradation of Diclofenac Sodium

Qiongfang Zhuo,Cuilin Meng,Anqi Wang,Zhenghua Zhang,Xingxin Liu,Guanlin Chen,Yongfu Qiu,Ghulam Yasin,Junfeng Niu

DOI: https://doi.org/10.1016/j.apcatb.2024.124280

2024-01-01

Abstract:The low mass transfer efficiency, sluggish redox cycles of metal ions, and poor recycling rate of S2O82-→SO42-→S2O82- greatly limit the application of two-dimensional (2D) electrodes and persulfate (PS) techniques. In this study, an interface engineering strategy was developed to anchor Cu quantum dots (CuQDs) onto a novel Cu-CoO@NC (N-doped carbon) core-shell submicrosphere catalyst. The 3D electrochemical system (2D electrodes combined with Cu-CoO@NC particle electrodes) exhibited excellent catalytic behavior with 99.1% removal of diclofenac sodium in 30min. The Cu-CoO@NC catalyst presented effectiveness and strong environmental adaptability in a broad pH range, in actual water bodies, and for multiple PPCPs. Based on the results analyses of experiments and density functional theory (DFT) calculations, the excellent performance of Cu-CoO@NC/PS during electrochemical oxidation (EO) are results from the effective mass transfer, efficient interfacial charge transport, rapid redox cycling of bimetallic ions promoted by cathode, repetitive cycle of S2O82- → SO42- → S2O82- caused by anode and multiple active sites of PS.
The CoO-doped carbon nanotubes enhance electronic performance and effectively activate persulfate for the degradation of sulfafurazole

Qingsong Liu,Bin Zhou,Caihong Zheng,Dong Wang,Yao Ge,Shengqiong Fang

DOI: https://doi.org/10.1016/j.envres.2024.118646

IF: 8.3

2024-06-01

Environmental Research

Abstract:In recent studies, carbon nanotube (CNTs) materials and their composites have demonstrated remarkable catalytic activity in the activation of persulfate (PS), facilitating the efficient degradation of organic pollutants. In this study, a novel Co loaded carbon nanotubes (CoO@CNT) catalyst was prepared to promote PDS activation for the degradation of sulfafurazole (SIZ). Experimental results, the CNT as a carrier effectively reduces the leaching of cobalt ions and improves the electron transport capacity,whereas the introduced Co effectively activates the PDS, promoting the generation of highly reactive radicals to degrade SIZ. Under optimized conditions (a catalyst dose of 0.2 g/L, a PDS dose of 1 g/L and an initial pH = 9.0), the obtained CoO@CNT demonstrated favorable Fenton-like performance, reaching a degradation efficiency of 95.55% within 30 min. Furthermore, density functional theory (DFT) calculations demonstrate that the introduction of cobalt (Co) accelerates electron transfer, promoting the decomposition of PDS while facilitating the Co2+/Co3+ redox cycling. We further employed the environmental chemistry and risk assessment system (ECOSAR) to evaluate the ecological toxicity of intermediate products, revealing a significant reduction in ecological toxicity associated with this degradation process, thereby confirming its environmental harmlessness. Through batch experiments and studies, we gained a comprehensive understanding of the mechanism and influencing factors of CoO@CNT in the role of SIZ degradation, and provided robust support for evaluating the ecological toxicity of degradation products. This study provides a significant strategy for the development of efficient catalysts incorporating Co for the environmentally friendly degradation of organic pollutants.

environmental sciences,public, environmental & occupational health

Orthopaedic training and education in Australia.

Spherical Cu<sub>2</sub>O-Fe<sub>3</sub>O<sub>4</sub>@chitosan bifunctional catalyst for coupled Cr-organic complex oxidation and Cr(VI) capture-reduction

Boosting peroxymonosulfate activation via Fe–Cu bimetallic hollow nanoreactor derived from copper smelting slag for efficient degradation of organics: The dual role of Cu

Enhanced Fenton-like catalysis via interfacial regulation of g-C3N4 for efficient aromatic organic pollutant degradation

MOF-derived Three-Dimensional Flower-Like FeCu@C Composite As an Efficient Fenton-like Catalyst for Sulfamethazine Degradation

Mechanism study on a novel Cu/Fe co-catalyzed heterogeneous particle mediated activation of hydrogen peroxide for efficient degradation of cyanides

Enhanced sulfamethazine degradation via peroxydisulfate activation by biochar-supported nano zero-valent iron-copper: The key role of Fe(IV) and electron transfer induced by doped Cu

Doping Sb into CuFe2O4 Improved the Catalytic Performance in the Electrochemically Enhanced Homogeneous Peroxymonosulfate-Heterogeneous Catalytic System for the Degradation of Ciprofloxacin

A novel electrocatalytic filtration system with carbon nanotube supported nanoscale zerovalent copper toward ultrafast oxidation of organic pollutants

Boosting the activation of Peroxymonosulfate and the degradation of metronidazole over FeCo2O4 quantum dots anchored on β-FeOOH Nanosheets: Inspired from octahedral Co(II) with missing angle

Characteristics of Fe/C catalysts based on pyrolysis of ferric citrate and its peroxymonosulfate activation performance to degrade sulfadiazine in water

Core-shell structured Fe 0 /Mn 0 @Fe/Mn oxides bimetallic nanocomposites as novel heterogeneous electro-Fenton catalysts for methylene blue removal

Octahedron of zero-valent and mono-valent copper anchored on nitrogen doping porous carbon to enhance heterogeneous electro-Fenton like activity

CoFe 2 O 4 /MWCNTs as peroxymonosulfate activator for sulfadiazine degradation in wastewater: Performance, mechanisms, degradation pathway, and products toxicity assessment

Efficient Removal of Organic Contaminants in CuS-Mediated Solid-Liquid-Interfacial Fenton-Like System: Role of Bimetallic Cycle and Sulfur Species

In-situ synthesis of N-doped biochar encapsulated Cu(0) nanoparticles with excellent Fenton-like catalytic performance and good environmental stability

Modulating electronic structure of Fe site by adjacent Cu site through orbital coupling in Cu-Fe 2 O 3 catalyst derived from Fenton sludge quenching

A novel bifunctional particle electrode with abundant Fe/Fe 3 C and Fe-N-C sites to enhance the performance of electro- in degrading organic pollutant

Nitrogen-doped iron carbide composites for activating peroxymonosulfate to degrade sulfonamides

Cu Quantum Dots Anchored Core-Shell Submicrosphere Catalyst for Electro-Enhanced Degradation of Diclofenac Sodium

The CoO-doped carbon nanotubes enhance electronic performance and effectively activate persulfate for the degradation of sulfafurazole