Avicins, a novel plant-derived metabolite lowers energy metabolism in tumor cells by targeting the outer mitochondrial membrane.

V. Haridas,Xiao-xiao Li,T. Mizumachi,M. Higuchi,V. V. Lemeshko,M. Colombini,J. Gutterman

DOI: https://doi.org/10.1016/J.MITO.2006.12.005

2007-05-01

Abstract:

What problem does this paper attempt to address?

Short-term effects of customized arch support insoles on symptomatic flexible flatfoot in children: A randomized controlled trial

Ru-Lan Hsieh,Hui-Ling Peng,Wen-Chung Lee

DOI: https://doi.org/10.1097/MD.0000000000010655

Abstract:Background: Limited evidence is available regarding the effects of insoles on pediatric flexible flatfoot because of the heterogeneity and low methodological quality of previous studies. The purpose of this prospective trial is to examine the short-term effects of customized arch support insoles on symptomatic flexible flatfoot in children by using the International Classification of Functioning, randomized controlled Disability, and Health (ICF) framework. Methods: This study was conducted in a rehabilitation outpatient clinic of a teaching hospital. Fifty-two children with symptomatic flexible flatfoot were included. The children in the treatment group wore customized arch support insoles for 12 weeks, whereas those in the control group did not wear the insoles. Both clinical and radiographic measurements, including the navicular drop, foot posture index, Beighton hypermobility score, talonavicular coverage angle, calcaneal inclination angle, and calcaneal-first metatarsal angle, were used for diagnosing flexible flatfoot. Physical activity (10-m normal and fast walking, stair ascent, stair descent, and chair rising), physical function, and psychometric properties (Pediatric Outcome Data Collection Instrument and Pediatric Quality of Life Inventory) were evaluated at the baseline and 12 weeks after the intervention. Results: Compared with the control group, the treatment group exhibited significant improvement in pain/comfort (P = .048), physical health (P = .035), stair ascent time (P = .015), upper extremity and physical function (P = .016), and transfer and basic mobility (P = .042) during the intervention period. Conclusion: Children with flexible flatfoot who wore customized arch support insoles for 12 weeks exhibited significantly improved pain/comfort, physical health, stair ascent time, upper extremity and physical function, and transfer and basic mobility. These variables belong to the domains of body functions and structures and activity and participation in the ICF framework. However, because the groups were not comparable, additional studies with larger sample sizes should be conducted.
Effect of Custom-Made Orthotic Insoles on Lower Limb Biomechanics in Children with Flexible Flat Feet

Yunqi TANG,Shizhe CHENG,Lingqiu ZOU,Liying ZHOU,Peiyao LIANG,Hui REN,Xiaoli LIU

DOI: https://doi.org/10.24264/lfj.23.2.2

2023-06-30

Leather and Footwear Journal

Abstract:This study aimed to investigate the effect of custom-made orthotic insoles on the lower limb biomechanics in children with flexible flat feet. A sample of 27 children (19 boys and eight girls) aged 7 to 13 years old with flexible flat feet participated in the study. Each custom-made orthotic insole was individually designed based on the foot of each subject, using ethylene-vinyl acetate (EVA) material with medium density. The study was conducted using a gait analysis laboratory, and participants were required to walk randomly at a self-selected speed with one of three insole conditions (custom-made orthotic insole, flat insole, and barefoot). The data was processed using Visual 3D software and analyzed by SPSS software. The results showed that using custom-made orthotic insoles resulted in a significant reduction in the maximum ankle inversion angle and ankle inversion moment while increasing the knee adduction moment during the stance phase when compared to wearing either flat insoles or being barefoot (p<0.05). This study found that custom-made orthotic insoles significantly altered the biomechanical characteristics of the lower limbs of children with flexible flat feet, reducing the movement of the ankle joint in the frontal plane, thereby enhancing ankle joint stability, but may increase knee joint load.
[Multiple myeloma in renal transplant recipients].

I. Rekhtina,L. Biriukova,V. A. Varshavskii,G. P. Golitsina,V. Savchenko

2010-07-15

Abstract:Severe renal failure (RF) may be the first and only clinical manifestation of multiple myeloma (MM). Occasionally the disease remains long unrecognized and the patients receive renal function replacement therapy, including renal transplantation (RT). To treat MM in renal transplant recipients is a complex medical and ethical problem. The paper presents the authors' experience in treating 3 patients with MM diagnosed after RT and evolving transplant lesion. Various morphological types of grafted kidney lesion were detected. These included fibrillar glomerulonephritis, cast nephropathy, and the latter concurrent with light-chain deposition disease. RF most rapidly progressed in cast nephropathy. The natural history of the disease was unfavorable in all patients; VAD and PAD chemotherapy programs proved to be ineffective. It is concluded that RT should not be performed in patients with extended-stage MM due to the fact that there is a considerable risk for renal transplant lesion and severe infectious complications that may occur during chemotherapy. Blood and urine immunochemical studies should be conducted in all the patients who are to undergo RT.
Comparative study of the effects of custom-made insole and ordinary insole in adults with flexible flatfoot on different slopes

Yangzheng Jiang,Jiantao Yang,Hui Tian,Chuan Jiang,Hongzhu Wang

DOI: https://doi.org/10.3233/THC-231785

Abstract:Background: Flatfoot (pes planus) is a common foot deformity, and its causes are mainly related to age, gender, weight, and genetics. Previous studies have shown that custom-made insoles could have a positive effect in improving plantar pressure and symptoms in individuals with flexible flatfeet, but it remains to be explored whether they can still show benefits in daily walking on different slopes. Objective: This study aims to investigate a custom-made insole based on plantar pressure redistribution and to verify its effectiveness by gait analysis on different slopes. Methods: We recruited 10 subjects and compared the peak pressure and impulse in each area between custom-made insole (CI) and ordinary insole (OI) groups. Results: The results illustrate that CI raises the pressure in T area, improves the ability of the subjects to move forward in the slope walking, which was beneficial to gait stability. Conclusion: The redistribution of pressure in MF and MH area is promoted to provide active protection for subjects. Meanwhile, CI could decrease the impulse in MF area during uphill and level walking, which effectively reduces the accumulation of fatigue during gait. Moreover, avoiding downhill walking could be able to protect foot from injury in daily life.
Blood and marrow transplantation: a perspective from the University of Minnesota

J. Kersey

DOI: https://doi.org/10.1007/S12026-007-0037-8

2007-06-23

Immunologic Research

Abstract:
Design and Preliminary Validation of Individual Customized Insole for Adults with Flexible Flatfeet Based on the Plantar Pressure Redistribution

Yangzheng Jiang,Duojin Wang,Jiming Ying,Pengfei Chu,Yu Qian,Wenming Chen

DOI: https://doi.org/10.3390/s21051780

IF: 3.9

2021-03-04

Sensors

Abstract:Flatfoot is a common musculoskeletal deformity. One of the most effective treatments is to wear individually customized plantar pressure-based insoles to help users change the abnormally distributed pressure on the pelma. However, most previous studies were divided only into several plantar areas without detailed plantar characteristic analysis. In this study, a new insole is designed which redistributes pressure following the analysis of characteristic points of plantar pressure, and practical evaluation during walking of subjects while wearing the insole. In total, 10 subjects with flexible flatfeet have participated in the performance of gait experiments by wearing flat insoles, orthotic insoles, and plantar pressure redistribution insoles (PPRI). The results showed that the stance time of PPRI was significantly lower than that of the flat insoles under slow gait. PPRI in the second to third metatarsal and medial heel area showed better unloading capabilities than orthotic insoles. In the metatarsal and heel area, the PPRI also had its advantage in percentage of contact area compared to flat insole and orthotic insole. The results prove that PPRI improves the plantar pressure distribution and gait efficiency of adults with flexible flatfeet, and can be applied into clinical application.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Comparison of different media for preservation and transport of viable rickettsiae.

H. Frickmann,G. Dobler

DOI: https://doi.org/10.1556/EuJMI.3.2013.3.7

2013-09-23

Abstract:Rickettsiae tend to have a rapid decrease of viability outside living cells. Therefore, the transport of samples containing viable rickettsiae for culturing in cell culture for diagnostic purposes is challenging. The viability of rickettsiae in different transport media (commercially available transport medium COPAN "UTM-RT transport medium for viruses, chlamydia, mycoplasma, and ureaplasma," minimal essential medium (MEM) with and without 10% foetal calf serum) at various time points at 4 °C and at ambient temperature (22 °C) was compared. Rickettsia honei was used as model organism. After 2 weeks of storage at room temperature, no viable rickettsiae were detectable any more while storage at 4 °C kept rickettsiae viable for up to 4 weeks. The commercially available COPAN medium showed similarly good or slightly better stabilizing effects on rickettsiae compared with MEM + 10% foetal calf serum, pure MEM demonstrated the poorest results. It is important to transport and store media with potentially rickettsiae-containing samples at 4 °C to prevent inactivation. MEM + 10% foetal calf serum can be used if no commercial medium is available with similarly good results.
The long-term structural effect of orthoses for pediatric flexible flat foot: A systematic review

Jun Young Choi,Woi Hyun Hong,Jin Soo Suh,Jae Hwi Han,Dong Joo Lee,Yong Jae Lee

DOI: https://doi.org/10.1016/j.fas.2019.01.007

Abstract:Background: We aimed to evaluate the structural effects of the long-term use of orthoses for pediatric flexible flat foot (PFFF) using an algorithmic approach and a structured critical framework to assess the methodological quality of reported studies. Methods: A comprehensive literature search using five databases, namely MEDLINE, the Cochrane Library, Scopus, the Web of Science, and EMBASE, was performed for pertinent articles published before March 30, 2018. Studies with quantitative data on the effects of the long-term use of orthoses for PFFF were included. The search strategy was adapted as appropriate for all other databases searched considering the differences in indexing terms and search syntax for each database. Results: Randomized controlled trials and prospective cohort studies could not prove the estimated effects of orthoses on the medial longitudinal arch. They revealed that flexible flat feet in young children slowly improved with growth, regardless of the type of footwear used. However, three of four case series studies revealed that positive long-term effects could be achieved using orthoses. Conclusion: There is no strong evidence that the long-term use of orthoses improved the structural problem of PFFF.
Perception of interrupted speech: cross-rate variation in the intelligibility of gated and concatenated sentences.

Valeriy Shafiro,S. Sheft,Robert Risley

DOI: https://doi.org/10.1121/1.3606463

2011-07-26

Abstract:Temporal constraints on the perception of variable-size speech fragments produced by interruption rates between 0.5 and 16 Hz were investigated by contrasting the intelligibility of gated sentences with and without silent intervals. Concatenation of consecutive speech fragments produced a significant decrease in intelligibility at 2 and 4 Hz, while having little effect at lower and higher rates. Consistent with previous studies, these findings indicate that (1) syllable-sized intervals associated with intermediate-rate interruptions are more susceptible to temporal distortions than the longer word-size or shorter phoneme-size intervals and (2) suggest qualitative differences in underlying perceptual processes at different rates.
A Three-Dimensional Printed Foot Orthosis for Flexible Flatfoot: An Exploratory Biomechanical Study on Arch Support Reinforcement and Undercut

Ka-Wing Cheng,Yinghu Peng,Tony Lin-Wei Chen,Guoxin Zhang,James Chung-Wai Cheung,Wing-Kai Lam,Duo Wai-Chi Wong,Ming Zhang

DOI: https://doi.org/10.3390/ma14185297

IF: 3.4

2021-09-14

Materials

Abstract:The advancement of 3D printing and scanning technology enables the digitalization and customization of foot orthosis with better accuracy. However, customized insoles require rectification to direct control and/or correct foot deformity, particularly flatfoot. In this exploratory study, we aimed at two design rectification features (arch stiffness and arch height) using three sets of customized 3D-printed arch support insoles (R+U+, R+U−, and R−U+). The arch support stiffness could be with or without reinforcement (R+/−) and the arch height may or may not have an additional elevation, undercutting (U+/−), which were compared to the control (no insole). Ten collegiate participants (four males and six females) with flexible flatfoot were recruited for gait analysis on foot kinematics, vertical ground reaction force, and plantar pressure parameters. A randomized crossover trial was conducted on the four conditions and analyzed using the Friedman test with pairwise Wilcoxon signed-rank test. Compared to the control, there were significant increases in peak ankle dorsiflexion and peak pressure at the medial midfoot region, accompanied by a significant reduction in peak pressure at the hindfoot region for the insole conditions. In addition, the insoles tended to control hindfoot eversion and forefoot abduction though the effects were not significant. An insole with stronger support features (R+U+) did not necessarily produce more favorable outcomes, probably due to over-cutting or impingement. The outcome of this study provides additional data to assist the design rectification process. Future studies should consider a larger sample size with stratified flatfoot features and covariating ankle flexibility while incorporating more design features, particularly medial insole postings.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Marketing myopia. 1960.

T. Levitt

2004-07-01

Harvard business review

Abstract:
Biomechanical effect between conventional and 3-dimensional printed customized foot orthoses on medial longitudinal arch support and rearfoot angle in adults with flexible flatfeet

Bongkoch Praewpipat,Yoshihiro Ehara,Wasana Kosorn,Nutdanai Nampichai

DOI: https://doi.org/10.1097/PXR.0000000000000383

2024-10-03

Abstract:Background: Customized foot orthoses are used to treat flexible flatfoot regarding medial longitudinal arch (MLA) support, alignment correction, and pain management. Recently, 3-dimensional (3D) printing orthosis has become the focus of discussion regarding function and manufacturing. We aimed to investigate differences in biomechanical effects between flat insole (Flat), conventional foot orthosis (Cinsole), and 3D printed foot orthosis (3Dinsole) use on MLA support and rearfoot alignment during walking in adult flexible flatfeet. Methods: Twelve men with flexible flatfoot were recruited. Data were collected and analyzed using a Vicon motion capture system under 3 trial conditions: Flat and >1 month after using Cinsole and 3Dinsole. Repeated-measures analysis of variance with Bonferroni post hoc tests was used to compare kinematics variables, foot pain, and satisfaction. Result: Dynamic navicular drop significantly reduced with the use of the Cinsole and 3Dinsole compared with Flat ( P < 0.001; ηp 2 = 0.65). The maximum rearfoot eversion angle with the use of the Cinsole and 3Dinsole significantly reduced from Flat ( P < 0.001; ηp 2 = 0.56). Foot pain score significantly decreased after using foot orthoses; satisfaction between Cinsole and 3Dinsole was not significantly different. Conclusions: Thus, Cinsole and 3Dinsole are effective alternative treatments of MLA support and rearfoot alignment in adults with flexible flatfoot. 3D printing is a future technology with potential to replace conventional production methods. However, material characteristics, design, and manufacturing process can affect treatment outcomes; hence, our results may not represent all variations of 3D printed foot orthoses.
Location of heitz's zerstäubungsstadium (dispersion phase) in the mitotic cycle ofPhaseolus coccineus and the concept of Angiosperm endomitosis

A. Cavallini,P. Cionini,F. D'amato

DOI: https://doi.org/10.1007/BF01287455

1981-09-01

PROTOPLASMA

Abstract:
Influence of glucose and fructose in the extender during long-term storage of chilled canine semen.

S. Ponglowhapan,B. Essén‐Gustavsson,C. Linde Forsberg

DOI: https://doi.org/10.1016/J.THERIOGENOLOGY.2004.02.014

IF: 2.923

2004-11-01

Theriogenology

Abstract:
The effect of personalized orthopedic insoles on plantar pressure during running in subtle cavus foot

Mujia Ma,Qingquan Song,Hui Liu

DOI: https://doi.org/10.3389/fbioe.2024.1343001

IF: 5.7

2024-02-22

Frontiers in Bioengineering and Biotechnology

Abstract:Objective: This study aims to investigate the patterns of plantar pressure distribution during running for patients with subtle cavus foot (SCF) and determine the impact of personalized orthopedic insoles with forefoot wedge on plantar pressure distribution in patients with SCF. Methods: Sixteen undergraduate participants (8 with SCF and 8 with normal arches) were recruited based on arch height index measurements. Two full-length insoles were personalized for each SCF based on plantar pressures during running, an arch support insole (ASI) and an arch support with forefoot wedge insole (AFI). Foot pressure data collected during different insole conditions in running, analyzing ten regions of footprints for peak pressure and pressure-time integral. Results: Higher peak pressures were observed in patients with SCF at the medial forefoot ( p = 0.021), medial heel ( p = 0.013), and lateral heel ( p = 0.025), with a higher pressure-time integral also noted at the medial forefoot ( p = 0.025), medial heel ( p = 0.015), and lateral heel ( p = 0.047) when compared to normal arches. Compared with without-insole, both the AFI and the ASI reduced peak pressure at the medial (AFI p = 0.011; ASI p = 0.024) and lateral heel (AFI p = 0.028; ASI p = 0.032). The AFI reduced peak pressure at the medial heel ( p = 0.013) compared with the ASI. Both the AFI and the ASI reduced pressure-time integral at the medial forefoot (AFI p = 0.003; ASI p = 0.026), central forefoot (AFI p = 0.005; ASI p = 0.011), medial heel (AFI p = 0.017; ASI p = 0.005), and lateral heel (AFI p = 0.017; ASI p = 0.019). Additionally, the ASI reduced pressure-time integral at the big toe ( p = 0.015) compared with the without-insole. Conclusion: These findings demonstrate that during running in patients with SCF, plantar pressures are concentrated in the forefoot and heel compared to the normal arch. The personalized orthotic insoles can be used to effectively redistribute plantar pressure in patients with SCF running. Incorporating a forefoot wedge to specifically address the biomechanical abnormalities associated with SCF may enhance the effectiveness of orthopedic insoles.

multidisciplinary sciences
Induction of G2 arrest and gene expression by 2-aminopurine in human U937 promonocyte-macrophage cells.

J. Maio,G. Graham,F. L. Brown

DOI: https://doi.org/10.1006/EXCR.1995.1250

IF: 4.145

1995-08-01

Experimental Cell Research

Abstract:The adenine analogue, 2-aminopurine (2-AP), induces G2 arrest in the human promonocyte-macrophage cell line, U937. The arrest is reversible and cells enter mitosis to resume normal logarithmic growth upon removal of the drug. These physiological changes are accompanied by markedly stimulated expression of eukaryotic gene constructs stably integrated in the chromosomes or introduced into the cells by transient transfection. Induction by 2-AP has two components: one involves increased transcription of the introduced genes as shown by run-on transcription experiments. The other involves markedly increased mRNA half-life that affects mRNA transcribed from transiently transfected DNA but apparently does not affect mRNA transcribed from the same chromosomally integrated sequences. Together, these two components could account for the 100- to 1000-fold inductions observed with various transfected gene constructs reported here and elsewhere. Maximum induction by 2-AP is promiscuous with respect to eukaryotic promoter origins or sequences, but appears to require a minimum of two such promoter elements. Thus, G2 cell cycle arrest induced by 2-AP is also associated with transcriptional and post-transcriptional alterations in gene expression. The data also suggest that transiently transfected DNAs may enter spatial or biochemical compartments of the nucleus that are different from those of normal genes in their native locations. These differences may affect the abundance and fate of the transcribed mRNA and, in some circumstances, introduce serious discordances into studies of gene regulation.
Influence of Contoured Insoles with Different Materials on Kinematics and Kinetics Changes in Diabetic Elderly during Gait

Qiu-Qiong Shi,Pui-Ling Li,Kit-Lun Yick,Jiao Jiao,Qi-Long Liu

DOI: https://doi.org/10.3390/ijerph191912502

2022-09-30

Abstract:Background: Alterations in the lower limb kinematics and kinetics of diabetic patients have been reported in previous studies. Inappropriate choices of orthopedic insole materials, however, fail to prevent diabetic foot ulcers and modify abnormal gait. The aim of this study was to quantitatively compare the effects of contoured insoles with different materials on the kinematics of and kinetics changes in the diabetic elderly during gait. Methods: There were 21 diabetic patients who participated in this study. Three-dimensional (3D) experimental contoured insoles constructed of soft (i.e., Nora Lunalastik EVA and PORON® Medical 4708) and rigid (i.e., Nora Lunalight A fresh and Pe-Lite) materials with Langer Biomechanics longitudinal PPT® arch pads were adopted. An eight-camera motion capture system (VICON), two force plates, and an insole measurement system-Pedar® with 99 sensors-were utilized to obtain the kinematics and kinetics data. The plug-in lower body gait model landmarks were used for dynamic data acquisition during gait. The corresponding data from five gait cycles were selected and calculated. Results: The range of motions (ROMs) of the ankle joint (p = 0.001) and knee joint (p = 0.044) were significantly influenced when the contoured insoles were worn in comparison to the barefoot condition. The joint moments of the lower limbs with maximum ankle plantarflexion during the loading response and maximum knee and hip flexions were significantly influenced by the use of contoured insoles with different materials in the diabetic elderly. The peak plantar pressure (PPP) of the forefoot (p < 0.001), midfoot (p = 0.009), and rearfoot (p < 0.001) was significantly offloaded by the contoured insoles during the stance phase, whilst the PPP of the rearfoot (p < 0.001) was significantly offloaded during the swing phase. Conclusions: The contoured insoles, especially those constructed with soft materials, significantly offloaded the PPP during gait-hence accommodating certain abnormal gait patterns more effectively compared to going barefoot.
Zur Kenntniss des Blutlaufs in den Kranzgefässen des Herzens

O. Langendorff

DOI: https://doi.org/10.1007/BF01661902

Abstract:
Biomechanical Analysis of the FlatFoot with Different 3D-Printed Insoles on the Lower Extremities

Chia-Yi Hsu,Chien-Shun Wang,Kuang-Wei Lin,Mu-Jung Chien,Shun-Hwa Wei,Chen-Sheng Chen

DOI: https://doi.org/10.3390/bioengineering9100563

IF: 5.046

2022-10-17

Bioengineering

Abstract:Insoles play an important role in the conservative treatment of functional flat foot. The features of 3D-printed insoles are high customizability, low cost, and rapid prototyping. However, different designed insoles tend to have different effects. The study aimed to use 3D printing technology to fabricate three different kinds of designed insoles in order to compare the biomechanical effects on the lower extremities in flat foot participants. Ten participants with functional flat foot were recruited for this study. Data were recorded via a Vicon motion capture system and force plates during walking under four conditions: without insoles (shoe condition), with auto-scan insoles (scan condition), with total contact insoles (total condition), and with 5-mm wedge added total contact insoles (wedge condition). The navicular height, eversion and dorsiflexion angles of the ankle joint, eversion moment of the ankle joint, and adduction moment of the knee joint were analyzed, and comfort scales were recorded after finishing the analysis. Compared to the shoe condition, all three 3D printed insoles could increase the navicular height and ankle dorsiflexion angle and improve comfort. Among the three insoles, the wedge condition was the most efficient in navicular height support and increasing the ankle dorsiflexion angle.
Smart insole-based analysis of gait biomechanics for insoles in patients with flatfoot

Taro Kasai,Eisuke Orito,Azusa Furukawa,Tomohiro Kobata,Tetsuro Yasui

DOI: https://doi.org/10.1016/j.gaitpost.2024.08.074

Abstract:Background: Assessing the effect of insoles on gait biomechanics and foot comfort remains challenging. Our novel in-insole-type wearable sensor device (smart insole) enables accurate quantitative evaluation of gait parameters without affecting the subject's foot comfort. Research question: What are the effects of insoles on gait biomechanics and foot comfort in patients with flatfoot, as evaluated using a novel smart insole? Methods: Thirty-three subjects with 61 flatfeet were recruited. Three different types of prefabricated insoles were tested: a control insole as an experimental control, a flat insole with only cushion pads for the shock absorbing function, and an arch support insole with both cushioning pads and arch support functions. Gait parameters and visual analog scale (VAS) scores for foot comfort were measured during 30 m of straight walking with each insole incorporating the wearable sensor device. The differences in gait parameters and foot comfort between the flat and arch support insoles relative to the control insole were analyzed. Additionally, the correlations between gait parameters and foot comfort were evaluated. Results: Maximum plantarflexion angle significantly decreased (p = 0.03) and the toe-out angle significantly increased (p < 0.01) with arch support insoles compared to flat insoles. Significantly better foot comfort was demonstrated when walking with arch support insoles than with flat insoles (p < 0.01). The only gait parameter correlated with foot comfort was foot lift height while walking with an arch support insole (r = -0.45, p < 0.01). Significance: A novel smart insole revealed that foot lift height was a key gait parameter for determining foot comfort while walking with an arch support insole. Our findings provide important evidence for selecting a comfortable flatfoot insole based on gait data measured using a smart insole.

Avicins, a novel plant-derived metabolite lowers energy metabolism in tumor cells by targeting the outer mitochondrial membrane.

Short-term effects of customized arch support insoles on symptomatic flexible flatfoot in children: A randomized controlled trial

Effect of Custom-Made Orthotic Insoles on Lower Limb Biomechanics in Children with Flexible Flat Feet

[Multiple myeloma in renal transplant recipients].

Comparative study of the effects of custom-made insole and ordinary insole in adults with flexible flatfoot on different slopes

Blood and marrow transplantation: a perspective from the University of Minnesota

Design and Preliminary Validation of Individual Customized Insole for Adults with Flexible Flatfeet Based on the Plantar Pressure Redistribution

Comparison of different media for preservation and transport of viable rickettsiae.

The long-term structural effect of orthoses for pediatric flexible flat foot: A systematic review

Perception of interrupted speech: cross-rate variation in the intelligibility of gated and concatenated sentences.

A Three-Dimensional Printed Foot Orthosis for Flexible Flatfoot: An Exploratory Biomechanical Study on Arch Support Reinforcement and Undercut

Marketing myopia. 1960.

Biomechanical effect between conventional and 3-dimensional printed customized foot orthoses on medial longitudinal arch support and rearfoot angle in adults with flexible flatfeet

Location of heitz's zerstäubungsstadium (dispersion phase) in the mitotic cycle ofPhaseolus coccineus and the concept of Angiosperm endomitosis

Influence of glucose and fructose in the extender during long-term storage of chilled canine semen.

The effect of personalized orthopedic insoles on plantar pressure during running in subtle cavus foot

Induction of G2 arrest and gene expression by 2-aminopurine in human U937 promonocyte-macrophage cells.

Influence of Contoured Insoles with Different Materials on Kinematics and Kinetics Changes in Diabetic Elderly during Gait

Zur Kenntniss des Blutlaufs in den Kranzgefässen des Herzens

Biomechanical Analysis of the FlatFoot with Different 3D-Printed Insoles on the Lower Extremities

Smart insole-based analysis of gait biomechanics for insoles in patients with flatfoot