Abstract:Highlights • An eco-friendly route was employed to synthesize binary CuO/ZnO nanocomposites. • State-of-the-art analytical techniques were employed to determine the surface morphology, elemental composition, crystal structure, chemical states and important functional groups of the engineered photocomposites. • The optimization of sulfasalazine degradation was successfully investigated by applying a "response surface methodology (RSM)" model. • The optimized reaction values, pH = 4.06, SSZ dose = 47.75 mg/L, CuO/ZnO dose = 44.42 mg, and temperature = 23.60 °C. • The prepared photocomposites presented an exceptional hydrogen production value of 1136 μmolh -1 g -1 . Background Approaches for sustainable, green, and expensive catalyst-free hydrogen production have not been explored extensively. Moreover, during photocatalysis, a lot of material gets wasted due to a lack of proper optimization of the reaction parameters to remove the toxic industrial effluents. Methods Here in this study, we present the green synthesis of CuO/ZnO nanocomposites from the ethanolic crude extract of Oxystelma esculentum . The synthesized photocomposites were systematically characterized by Fourier transform infrared spectroscopy, zeta potential, x-ray diffraction, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and x-ray photoelectron spectroscopy. The performed analyses provided useful insights into identifying important functional groups, size, morphology, elemental composition, crystallinity, and defects in the synthesized photocomposites. Significant Findings After characterization, the nanocomposites were evaluated for photocatalytic sulfasalazine (SSZ) degradation and hydrogen production. The response surface methodology (RSM) was employed to optimize SSZ's photocatalytic degradation. The optimized values of reaction parameters for the photocatalytic degradation of SSZ comprise pH = 4.06, SSZ dose = 47.75 mg/L, CuO/ZnO dose = 44.42 mg, and temperature = 23.60 °C. The rates observed in the hydrogen production (1136 μmolh -1 g -1 ) were obtained without costly co-catalyst. The optimized values for hydrogen production include photocatalyst dosage = 50 mg, pH = 7, and time = 5 hours. These features signify the efficient separation of charge carriers between synthesized nanocomposites, resulting in exquisite activities. Graphical abstract Download: Download high-res image (391KB) Download: Download full-size image CuO/ZnO nanocomposites towards Excellent Removal of Sulfasalazine from Wastewater and Pt free Hydrogen Production: Evaluation of Reaction Parameters by Response Surface Methodology.

Response Surface Methodology (RSM) modelling for the photocatalytic optimization study of benzophenone removal using CuWO4/NiO nanocomposite

Synthesis of CuO, ZnO nanoparticles, and CuO-ZnO nanocomposite for enhanced photocatalytic degradation of Rhodamine B: a comparative study

Photo-Catalytic Activity Improvement for Organic Pollutant Removal in Wastewater using Zinc Oxide Quantum Dots: An Experimental and Modeling Study

Clean technology and response surface approach for the photodegradation of selected antibiotics by catalyst supported on pine activated carbon

Ultrasonic-assisted synthesis of TiO2/MWCNT/Pani nanocomposite: Photocatalyst characterization and optimization of efficient variables in the degradation of benzene via RSM-CCD

Analysis of Photocatalytic Degradation of Phenol by Zinc Oxide Using Response Surface Methodology

Response surface methodology for optimization of photocatalytic degradation of aqueous ammonia

The Synthesis of Titania Nanoparticles (TiO2) and its Methylene Blue Dye removal efficiency through Photocatalysis based on Response Surface Methodology (RSM)

Insight into mechanism of excellent visible-light photocatalytic activity of CuO/MgO/ZnO nanocomposite for advanced solution of environmental remediation

Phenol contaminated water treatment by photocatalytic degradation on electrospun Ag/TiO2 nanofibers: Optimization by the response surface method

Photocatalytic Removal of Water Emerging Pollutants in an Optimized Packed Bed Photoreactor Using Solar Light

Design of an S-scheme photo-catalyst utilizing a Cu-doped perovskite and MOF-5 for simultaneous degradation of organic pollutants under LED light irradiation: Application of EXRSM method for spectra separation and BBD-RSM modeling

S-Schematic CuWO 4 /ZnO nanocomposite boosted photocatalytic degradation of organic dye pollutants

Green Engineered CuO/SnO2/HNT Composites: Illuminating the Photocatalytic Path for Organic Pollutant Remediation and Zebrafish Embryo Toxicity Evaluation

A multivariate modeling and experimental realization of photocatalytic system of engineered S-C3N4/ZnO hybrid for ciprofloxacin removal: Influencing factors and degradation pathways

Surfactant-Assisted Synthesis of NiO-ZnO and NiO-CuO Nanocomposites for Enhanced Photocatalytic Degradation of Methylene Blue Under UV Light Irradiation

Efficient Photocatalytic Degradation of Sulfamethazine by Cu-Cu O/TiO2 Composites: Performance, Photocatalytic Mechanism and Degradation Pathways

Synthesis of a novel biomass waste-based photocatalyst for degradation of high concentration organic pollutants under visible light: Optimization of synthesis condition and operational parameters via RSM-CCD

Response Surface Methodology: Photocatalytic Degradation Kinetics of Basic Blue 41 Dye Using Activated Carbon with TiO2

Surface Engineering and Built‐In Electric Field within Copper Sulfide/Graphitic Carbon Nitride Photocatalyst for Extremely Enhanced Charge Separation and Broad‐Spectrum Pharmaceuticals and Personal Care Products Degradation

Solar-driven Pt free hydrogen production and successive degradation of sulfasalazine using CuO/ZnO binary nanocomposites: Reaction kinetics and determination of reaction parameters using response surface methodology