Comment on "Quantum coherence and sensitivity of avian magnetoreception".

E. Gauger,S. Benjamin

DOI: https://doi.org/10.1103/PhysRevLett.110.178901

IF: 8.6

2013-03-19

Physical Review Letters

Abstract:A Comment on the Letter by J. Bandyopadhyay, T. Paterek, and D. Kaszlikowski, Phys. Rev. Lett. 109, 110502 (2012). The authors of the Letter offer a Reply.

What problem does this paper attempt to address?

Reducing the Carbon Footprint: Primary Production of Aluminum and Silicon with Changing Energy Systems

Gudrun Saevarsdottir,Thordur Magnusson,Halvor Kvande

DOI: https://doi.org/10.1007/s40831-021-00429-0

2021-08-31

Journal of Sustainable Metallurgy

Abstract:Abstract The world now pushes for a low-carbon future, and international goals for greenhouse gas emission reductions have been set. Industrial processes, including metallurgical processes, make up more than a fifth of the total global emissions, and those have been rising with infrastructure development and the expansion of the middle-class worldwide. This paper focuses on two energy-intensive processes, aluminum production and metallurgical grade silicon production, and how the carbon footprints from these industrial processes have developed in recent decades. The main trend is that the increased demand for these metals has led to expanding primary production for both of them, based on energy with an increasing share of fossil-based electric power. In fact, the average carbon footprint of the energy used in aluminum and silicon production has increased by 38% and 43%, respectively, from 2000 to 2019. The change in energy mix offsets any progress in process efficiencies. This work addresses this and discusses opportunities for improvements. Graphical Abstract

metallurgy & metallurgical engineering,green & sustainable science & technology
Decomposing the Change of CO2 Emissions: A Joint Production Theoretical Approach

Xing-Ping Zhang,Jing Zhang,Qin-Liang Tan

DOI: https://doi.org/10.1016/j.enpol.2013.03.034

IF: 9

2013-01-01

Energy Policy

Abstract:This paper presents an alternative decomposition method to explore the driving forces of change in carbon emissions by using distance functions estimated by data envelopment analysis. The proposed approach can isolate the effects of changes in GDP composition and energy supply composition on the change of carbon emissions. In addition, it is capable of identifying the effects of changes in different input ratios, which may be very important if there are substitution effects among different inputs. Moreover, the proposed model can measure the effects of changes in good and bad output technical efficiencies. Consequently, this decomposition technique allows a change of carbon emissions to be decomposed into contributions from ten factors, which provides more insights for policy makers. We apply this model to decompose carbon emissions in 25 OECD counties and China. For the sample countries as a whole, the empirical results indicate that the economic growth is the crucial driver to carbon emissions increase, while the changes in GDP composition and capital–energy ratio are two main drivers to carbon emissions reduction. In particular, we discuss in detail the driving forces of China's carbon emissions change in order to propose some valuable policy implications for China from an international perspective.
Driving factors and key paths of metal consumption in China: Evidence from structural decomposition and structural path analysis

Xuesong Dong,Jianbai Huang,Jinyu Chen

DOI: https://doi.org/10.1007/s10668-023-04285-8

IF: 4.08

2024-01-14

Environment Development and Sustainability

Abstract:The dependence of economic development on the metal resource is one of the challenges for developing countries. Given the enormous pressure of resource shortage in China, exploring the flow of metals between sectors is critical to achieve the Sustainable Development Goals. Based on the Chinese environmentally extended input–output (CEEIO) database from 1997 to 2017, the structural decomposition analysis (SDA) and the structural path analysis (SPA) models were combined to analyze the main driving factors and key paths of metal consumption in China. The results show that from 1997 to 2017, China's economic development and metal consumption presented states of weak decoupling and expansion coupling. Capital formation, consumption expansion, and export expansion were main drivers of metal consumption. Sectors such as metal smelting, construction, and other manufacturing products consumed a large amount of metal directly or provide intermediate products for other sectors. In the future, the upstream and downstream links of the industrial chain should be managed according to the key path, so as to optimize the structure of intermediate products and final demand and realize metal resources conservation from production to consumption.

environmental sciences,green & sustainable science & technology
Global carbon transfer and emissions of aluminum production and consumption

Xiaojie Yi,Yonglong Lu,Guizhen He,Hongkun Li,Chunci Chen,Haotian Cui

DOI: https://doi.org/10.1016/j.jclepro.2022.132513

IF: 11.1

2022-08-15

Journal of Cleaner Production

Abstract:Aluminum is the second most used metal after iron and steel worldwide, and its production is highly energy-intensive. It's increasingly important to focus on carbon reduction in the aluminum industry. The global aluminum cycle depends on international trade with great influence on the carbon distribution, but few studies have analyzed the aluminum industry from the perspective of carbon transfer. We analyze global carbon emissions and transfers from aluminum production, consumption, and trade from 2000 to 2018 to reveal the carbon distribution across regions and countries. The results show that 1) the aluminum trade carbon transfer increased from 99 to 114 Mt, mainly from resource-rich Oceania and Africa to faster-developing or developed regions such as Asia, Europe and North America, with a high degree of industrial concentration; 2) the carbon emissions of aluminum production increased from 363 to 1005 Mt, with China accounting for the largest share; 3) different countries had different consumption structure, and the northern hemisphere as the main consumption region has greater potential for recycling and emission reduction. There is a long way to go for the aluminum industry toward its low-carbon transition, and this study will provide important insights into carbon reduction in the global aluminum industry.

environmental sciences,green & sustainable science & technology,engineering, environmental
Tracing metal footprints via global renewable power value chains

Rao Fu,Kun Peng,Peng Wang,Honglin Zhong,Bin Chen,Pengfei Zhang,Yiyi Zhang,Dongyang Chen,Xi Liu,Kuishuang Feng,Jiashuo Li

DOI: https://doi.org/10.1038/s41467-023-39356-x

IF: 16.6

2023-06-22

Nature Communications

Abstract:The globally booming renewable power industry has stimulated an unprecedented interest in metals as key infrastructure components. Many economies with different endowments and levels of technology participate in various production stages and cultivate value in global renewable power industry production networks, known as global renewable power value chains (RPVCs), complicating the identification of metal supply for the subsequent low-carbon power generation and demand. Here, we use a multi-regional input-output model (MRIO) combined with a value chain decomposition model to trace the metal footprints (MFs) and value-added of major global economies' renewable power sectors. We find that the MFs of the global renewable power demand increased by 97% during 2005—2015. Developed economies occupy the high-end segments of RPVCs while allocating metal-intensive (but low value-added) production activities to developing economies. The fast-growing demand for renewable power in developed economies or developing economies with upper middle income, particularly China, is a major contributor to the embodied metal transfer increment within RPVCs, which is partly offset by the declining metal intensities in developing economies. Therefore, it is urgent to establish a metal-efficient and green supply chain for upstream suppliers as well as downstream renewable power installers for just transition in the power sector across the globe.

multidisciplinary sciences
Environmental Implications of Future Demand Scenarios for Metals: Methodology and Application to the Case of Seven Major Metals

Ester Van der Voet,Lauran Van Oers,Miranda Verboon,Koen Kuipers

DOI: https://doi.org/10.1111/jiec.12722

2018-01-22

Journal of Industrial Ecology

Abstract:Summary In this paper, we develop a method to assess the environmental impacts of metal scenarios. The method is life cycle based, but enables forward looking and upscaling. The method aims at translating metal demand scenarios into technology‐specific supply scenarios, necessary to make the translation into environmental impacts. To illustrate the different steps of the methodology, we apply it to the case of seven major metals. Demand scenarios for seven major metals are taken from literature. We translate those into technology‐specific supply scenarios, and future time series of environmental impacts are specified including recycling rates, energy system transformation, efficiency improvement, and ore grade decline. We show that the method is applicable and may lead to relevant and, despite many uncertainties, fairly robust results. The projections show that the environmental impacts related to metal production are expected to increase steeply. Iron is responsible for the majority of impacts and emissions are relatively unaffected by changes in the production and energy system. For the other metals, the energy transition may have substantial benefits. By far, the most effective option for all metals appears to be to increase the share of secondary production. This would reduce emissions, but is expected to become effective only in the second half of the twenty‐first century. The circular economy agenda for metals is therefore a long‐term agenda, similar to climate change: Action must be taken soon while benefits will become apparent only at the long term.

environmental sciences,green & sustainable science & technology,engineering, environmental
Online Carbon Emissions Auto-Accounting Approach in Aluminum Casting Production

Zhihui Wang,Jun Wu,Yanan Wang,Xuxia Zhang,Tao Peng,Weipeng Liu,Renzhong Tang

DOI: https://doi.org/10.1016/j.procir.2024.01.128

2024-01-01

Procedia CIRP

Abstract:The 2030 Agenda for Sustainable Development is driving national and international strategic shift towards new generation of innovative technologies. Electric vehicle is one of these technologies that revolutionizes the global automotive industry. It also triggers a consecutive surge of aluminum castings production. However, as a key lightweight-enabling process, aluminum casting is energy-intensive and accounts for significant carbon emissions. The arriving carbon tariff further challenges overseas aluminum casting suppliers. Accurate carbon emissions accounting in aluminum casting production can support the development of product carbon label, which is an essential step for manufacturing enterprises to tackle carbon tariff. Existing carbon emissions accounting in production normally uses life cycle assessment (LCA), but in the actual production situation, the LCA-required multi-source data, including materials, process parameters, energy, quality, and etc., as these data are widely sourced, heterogeneous and complex to correlate, remain difficult to be used in the accurate carbon emissions accounting directly. This leads to low creditability of the results and low efficiency of the accounting performance. To address this issue, an online carbon emissions auto-accounting approach in aluminum casting production is proposed. First, based on the minimum data collection unit in each process, the accurate production data related to carbon emissions (CEPD) is identified and gathered using Internet of Things technology. Subsequently, the activity level data of aluminum casting is calculated through the developed mathematical model. Finally, the multi-level carbon emissions of aluminum casting can be obtained employing the emission factor method. An aluminum casting workshop that produces electric vehicle subframes is taken as a case study to implement and validate this online auto-accounting approach. It shows that the carbon emissions accounting is feasible.
Assessment of impacts of green technology and innovation on sustainable mineral resource production

Wei Wang,Dongsheng Liu,Lifeng Chen,Meizhe Song,Jiaqi Xu

DOI: https://doi.org/10.1016/j.resourpol.2024.104770

IF: 8.222

2024-02-09

Resources Policy

Abstract:This study, employing the System-GMM estimation method, investigates the influence of importing green technological components on ferrous metal production in 22 Asian and 20 European countries from 2000 to 2021. The results reveal a substantial decline of 0.35 % and 0.21 % in ferrous metal production in response to a 1 % increase in green technological component imports in Asian and European nations. A positive correlation between GDP growth and ferrous metal production is observed, indicating significant increases of 0.63 % and 0.32 % in Asian and European countries. Additionally, heightened electricity consumption is linked to a notable surge of 0.42 % and 0.19 % in Asian and European nations, reflecting industrial growth. Foreign Direct Investment emerges as a motivating factor for ferrous metal production, emphasizing the need for environmentally aligned green FDI. The study concludes with actionable policy recommendations, including prioritizing green technologies, enforcing environmental regulations, integrating economic growth with sustainability, transitioning to renewable energy sources, stabilizing commodity prices, and promoting green FDI.

environmental studies
Regional disparities in steel production and restrictions to progress on global decarbonization: A cross-national analysis

Peng Wang,Shen Zhao,Tao Dai,Kun Peng,Qi Zhang,Jiashuo Li,Wei-Qiang Chen

DOI: https://doi.org/10.1016/j.rser.2022.112367

IF: 16.799

2022-06-01

Renewable and Sustainable Energy Reviews

Abstract:Steel production is one of few "difficult-to-decarbonize" sectors that requires strong decarbonization actions. However, the present focus is mainly limited to technical efforts, while regional disparities in steel production and its impacts on energy and carbon efficiency are rarely explored. By integrating environmental extended input-output analysis and material flow analysis, this study, as one of the first attempts, provides an analytical perspective to explore the regional emission performance of steel production across 44 countries and the rest 5 regions from 2000 to 2015, in which the physical indicators such as CO2 emission, energy use, and carbon intensity are compared. The results show that the CO2 emission associated with global steel production has increased by 2.5-fold from 2000 to 2015, and the global steel production has only increased by 1.9-fold, indicating a worsening environmental performance with emission intensity increasing from 2.1 tCO2/t in 2000 to 2.8 tCO2/t in 2015. This is closely linked to the historical changes in the geographical distribution of steel production as well as the faster increase of steel production in less efficient regions compared to that of more efficient regions. Despite the efficiency improvement in several nations, the carbon intensity of both developed (OECD, from 1.6 t CO2/t to 2.3 t CO2/t) and developing nations (non-OECD: 2.7 t CO2/t to 3.0 t CO2/t) were increasing during the past decade. Thus, there is a need to incorporate regional disparities and inequalities in the designingglobal decarbonization strategies of steel and other heavy industrial sectors.

energy & fuels,green & sustainable science & technology
Decoupling analysis between economic growth and aluminum cycle: From the perspective of aluminum use and carbon emissions

Ying Chen,Xuehong Zhu,Anqi Zeng

DOI: https://doi.org/10.1016/j.jenvman.2023.118461

2023-10-15

Abstract:Increasing aluminum demand under the clean energy and low-carbon transformation background increases the fuzziness of relationships between economic growth and aluminum use or aluminum related carbon emissions. To figure this out, this paper established an aluminum use and carbon emissions integrated decoupling model within the framework of anthropogenic aluminum cycle. A material flow analysis (MFA) during 2000-2020 for China's aluminum cycle was firstly conducted to quantify both aluminum flow and carbon emissions in each aluminum life-cycle process. Then, this paper evaluated and decomposed the decoupling index of aluminum use-economy and carbon emission-economy via the LMDI decomposition model. Results show that: (1) secondary aluminum has not become effective supplement for primary aluminum in China; (2) the expansive negative decoupling state was the most prevalent state. The decoupling effects of carbon emission were better than that of aluminum use; (3) technology improvement was an important impactor to decoupling process but didn't offset the growth in aluminum consumption or carbon emissions at most of the time. The government and industry organizers should implement active countermeasures to stimulate aluminum companies developing technology to improve aluminum use efficiency and reduce carbon emissions.
Understanding the Drivers of CO2 Growth in China's Iron and Steel Sector: an Integrated Analysis of the Energy–material–economy Nexus

Yuancheng Lin,Linwei Ma,Zheng Li,Weidou Ni

DOI: https://doi.org/10.1016/j.jclepro.2023.138849

IF: 11.1

2023-01-01

Journal of Cleaner Production

Abstract:China's iron and steel sector has experienced a significant rise in CO2 emissions over recent decades, largely due to complex interplays among energy use, material demand, and economy growth along the steel flow chain. Understanding these interconnected drivers is crucial for effective decarbonization policies. To address this issue, this study integrates extended input-output analysis, material flow analysis, and CO2 accounting to quantitatively assess the relative impacts of these drivers within the energy–material–economy nexus. The concept of exergy is introduced to account for heterogeneous energy and material flows within the nexus. The findings highlight the primary narrative behind CO2 growth in China's iron and steel sector: substantial investments facilitated construction sector expansion, subsequently driving up crude steel production via blast furnace routes and escalating CO2 emissions due to extensive coke use. Historical decomposition analysis from 2002 to 2017 underscores construction sector investments as the primary driver of CO2 growth, while energy efficiency improvements in steel production processes progressively contribute to CO2 reduction. Nevertheless, efforts to shift steel production routes for CO2 reduction are challenged by limited scrap supply. Furthermore, the analytical approach holds potential for investigating the underlying narrative and drivers of CO2 growth in other metal sectors across China.
Decoupling of environmental impacts in the iron and steel sector is still needed beyond emissions

Chaohui Li,Prajal Pradhan

DOI: https://doi.org/10.1002/sd.3204

IF: 12.5

2024-09-26

Sustainable Development

Abstract:The iron and steel (IAS) sector forms a critical foundation of the global economy, and the successful eco‐economic decoupling of this sector has been a focus of academic inquiry. However, existing literature in decoupling analysis often adopts a "carbon tunnel vision," that is, concentrating on carbon alone while neglecting a broader array of environmental consequences. Here, we conduct multi‐footprint accounting for the IAS sector from 2000 to 2022 for carbon, energy, water, and particulate matter dimensions, examining decoupling patterns across different regions and various footprint types. Contrary to existing literature showing the successful decoupling of the IAS sector's environmental impact with economic growth, our study highlights that the decoupling trend is only observed in carbon footprints. We find that the carbon intensity has experienced a substantial decrease in the post‐2016 period, effectively counterbalancing the growth induced by increased demand. Such a pattern is unobserved for other footprint types. This suggests that while carbon has decoupled, other environmental impacts, such as water use and particulate matter, remain closely linked to the economic activity in this sector. These findings highlight a need for achieving sustainability on a diverse scale beyond decarbonizing the IAS sector. A shift away from the "carbon tunnel vision" in scholarly inquiry and public attention is essential, as it may hinder achieving diverse sustainability goals.

green & sustainable science & technology,regional & urban planning,development studies
How Does Energy Consumption and Economic Development Affect Carbon Emissions? A Multi-Process Decomposition Framework

Xiao Liu,Yancai Zhang,Yingying Li

DOI: https://doi.org/10.3390/en15238802

IF: 3.2

2022-11-23

Energies

Abstract:Against the background that climate warming has become a global challenge, exploring the factors that drive carbon emissions change is important to achieve emission reduction targets. Because of the differences in economic development, resource endowment, and historical accumulation, different countries generally have significant technological heterogeneity in the carbon generation process. Therefore, the heterogeneity-related factors should also be understood, which can help policy making and responsibility attribution more accurate. As such, this study developed a meta-frontier-based production–theoretical decomposition analysis method to track the progress of carbon emission change in 42 countries during 2012–2019 with production heterogeneity between the countries taken into account. The empirical study draws the following three meaningful conclusions: firstly, the carbon emission process of different countries has clear technological heterogeneity, mainly reflected in aspects of their energy-use efficiency and energy-use technology. Secondly, the decomposition analysis results showed that the potential energy intensity effect and the economic activity effect played the dominant role in driving and reducing carbon emissions, respectively. Additionally, this conclusion is right for all types of countries. Thirdly, the attribution analysis showed that different types of countries have significantly different contributions to the influencing factors of carbon emission changes, among which countries with large energy consumption and large economies need to take more responsibility for emission reduction.

energy & fuels
Spatiotemporal evolution and driving factors for GHG emissions of aluminum industry in China

Chao Tang,Yong Geng,Xue Rui,Guimei Zhao

DOI: https://doi.org/10.1007/s11708-022-0819-7

2022-03-10

Frontiers in Energy

Abstract:China's aluminum (Al) production has released a huge amount of greenhouse gas (GHG) emissions. As one of the biggest country of primary Al production, China must mitigate its overall GHG emission from its Al industry so that the national carbon neutrality target can be achieved. Under such a background, the study described in this paper conducts a dynamic material flow analysis to reveal the spatiotemporal evolution features of Al flows in China from 2000 to 2020. Decomposition analysis is also performed to uncover the driving factors of GHG emission generated from the Al industry. The major findings include the fact that China's primary Al production center has transferred to the western region; the primary Al smelting and carbon anode consumption are the most carbonintensive processes in the Al life cycle; the accumulative GHG emission from electricity accounts for 78.14% of the total GHG emission generated from the Al industry; China's current Al recycling ratio is low although the corresponding GHG emission can be reduced by 93.73% if all the primary Al can be replaced by secondary Al; and the total GHG emission can be reduced by 88.58% if major primary Al manufacturing firms are transferred from Inner Mongolia to Yunnan. Based upon these findings and considering regional disparity, several policy implications are proposed, including promotion of secondary Al production, support of clean electricity penetration, and relocation of the Al industry.

energy & fuels
Study on Circularly Polarized Patch Antenna With Asymmetric Chiral Metamaterial

Yanwen Hu,Yu Wang,Le Liang,Yingda He,Wei-rong Chen,Zhongming Yan

DOI: https://doi.org/10.1109/LAWP.2018.2822820

IF: 4.2

2018-04-06

IEEE Antennas and Wireless Propagation Letters

Abstract:A circularly polarized (CP) patch antenna with a new chiral metamaterial structure was proposed. The proposed CP antenna is composed of a conventional linearly polarized patch antenna and a chiral metamaterial (CMM) board. For the CMM unit cell, the geometric parameters of the two pieces of copper films that are patterned on opposite sides of an FR-4 board are quite different. The function that a linear-polarization wave is converted into a circular polarization wave can be realized by the designed structure through simulation verification. When the CMM board is placed in the front of a conventional linear-polarized patch antenna, the antenna polarization mode can be changed to the circular polarized mode. The antenna performances have been investigated numerically and experimentally. Meanwhile, the new CMM structure could be applied to the field of circular-polarized antenna.
Carbon-Neutral Steel Production and Its Impact on the Economies of China, Japan, and Korea: A Simulation with E3ME-FTT:Steel

Pim Vercoulen,Soocheol Lee,Xu Han,Wendan Zhang,Yongsung Cho,Jun Pang

DOI: https://doi.org/10.3390/en16114498

IF: 3.2

2023-06-03

Energies

Abstract:The iron and steel industry is a large emitter of CO2 globally. This is especially true for the iron and steel industries in China, Japan, and Korea due to their production volumes and the prevalence of carbon-based steel production. With few low-carbon and commercially available alternatives, the iron and steel industry is truly a hard-to-abate sector. Each of the countries of interest have committed to a net-zero future involving the mitigation of emissions from steel production. However, few studies have investigated the means by which to achieve decarbonization beyond the inclusion of price signalling policies (e.g., carbon tax or emission trading schemes). Here, we use E3ME-FTT:Steel to simulate technology diffusion in the ISI under several policy environments and we investigate the likely impacts on the wider economy. The results show that penalizing carbon intensive processes can incentivize a transition towards scrap recycling, but it is relatively unsuccessful in aiding the uptake of low carbon primary steelmaking. A combination of support and penalizing policies can achieve deep decarbonisation (>80% emission reduction compared with the baseline). Mitigating the emissions in the iron and steel industry can lead to economic benefits in terms of GDP (China: +0.8%; Japan: +1.3%; Korea: +0.1%), and employment (Japan: +0.7%; Korea: +0.3%) with China, where job losses in the coal sector would negate job gains elsewhere, as the exception.

energy & fuels
Structural path decomposition of carbon emission: A study of China's manufacturing industry

Yushen Tian,Siqin Xiong,Xiaoming Ma,Junping Ji

DOI: https://doi.org/10.1016/j.jclepro.2018.05.047

IF: 11.1

2018-08-01

Journal of Cleaner Production

Abstract:Manufacturing is the foundation of China's economy and accounts for a large proportion of China's CO2 emissions. In this study, the structural path decomposition (SPD) methodology, based on an environmental input-output model, was used to find critical supply chain paths that drive changes in CO2 life cycle in China's manufacturing industry from 1992 to 2012. The changes in CO2 emissions were decomposed into three main factors: carbon emissions intensity, input-output structure, and final demand. In this study, the “weighted average decompositions” method of structural decomposition analysis and the non-comparable input-output table were first applied to the SPD method to obtain accurate results. The results indicate that higher-order paths, especially the paths that started from the “Smelting and Rolling of Metals” and the “Production and Supply of Electricity and Steam” sectors, led to an increase in carbon emissions. This was mainly due to the extension of the industrial chain as well as policy priorities. Moreover, CO2 emissions from the “Chemical Industry”, “Manufacture of Nonmetallic Mineral Products”, and “Smelting and Rolling of Metals” sectors were mainly induced by the increase of final export demands. Based on the results of this study, relevant policy changes have also been recommended.

environmental sciences,green & sustainable science & technology,engineering, environmental
Cluster characteristics of embodied carbon emissions in the international trade of metals: a sectoral-regional modeling perspective

Youfeng Cheng,Laijun Zhao,Hongru Yi,Chenchen Wang,Ke Wang,George N. Papageorgiou

DOI: https://doi.org/10.1007/s11356-023-30268-3

IF: 5.8

2023-11-01

Environmental Science and Pollution Research

Abstract:To be able to formulate any plausible strategies for sustainability, it is critical to establish a clear understanding of the international metals trade system complexity and the consequences in emergent embodied carbon emissions (ECE). For this purpose, we proposed a two-layer framework based on the multi-regional input-output model for calculating ECE: the intermediate production and final consumption trade layers. The proposed framework model combines the construction of a clustering index system and conducting cluster analysis from both the regional and sectoral dimensions. It is shown that developed regions transfer carbon emissions to developing regions via metals trading. This happens especially in the intermediate production stage at a level of 1.35 times higher than the final consumption stage. Furthermore, the metal sector suffers the most from carbon transfers from manufacturing, with the most carbon emissions transferred to mining. Moreover, considering environmental and technological factors to cluster regions and sectors into four and three clusters. China and Russia are in a cluster under greater pressure to reduce emissions as compared to other nations. Also, the construction and manufacturing form a cluster that their reduction of carbon emissions will effectively reduce the ECE of the metal sector. As a result, policy implications for reducing carbon emissions are investigated for each cluster in the international trade of metals contributing to the ultimate goal of global sustainable development.

environmental sciences
Material efficiency at the component level: how much metal can we do without?

Julian M. Allwood,Omer Music

DOI: https://doi.org/10.1098/rsta.2023.0245

2024-11-05

Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences

Abstract:Global production of steel and aluminium is a major driver of greenhouse gas emissions. Various processes might allow continued primary production of the two metals, but all depend on emissions-free electricity or carbon storage, and global capacity of these two key resources will be below demand for decades to come. As a result, zero-emissions steel and aluminium will mainly come from recycling, but supply will be lower than demand. This motivates demand reduction, and for the first time, this article estimates the inefficiency in current metal use by component type. The results demonstrate that around 80% of steel and 90% of aluminium liquid metal produced today may be unnecessary. Around 40% of liquid steel and 60% of liquid aluminium are never used in final components as they are removed along the supply chain of manufacturing. Of the metal that enters final service, approximately one-third could be saved by avoiding component over-specification. A further third could be saved, where the properties of metal are not used to their limits. These results point to specific opportunities for innovation in design and manufacturing technology, of which the highest priority is to re-think the use of sheet metal in construction. This article is part of the discussion meeting issue ‘Sustainable metals: science and systems’.

multidisciplinary sciences
Greenhouse gas emissions and future development trends of primary aluminum in China

Qiang Wanga,Peng Huang,Qinmeng Wang,Xueyi Guo

DOI: https://doi.org/10.1016/j.jclepro.2023.136828

IF: 11.1

2023-03-18

Journal of Cleaner Production

Abstract:Primary aluminum is widely used because of its excellent performance, and world primary aluminum production has increased 2.73 times in the past 20 years, with China increasing up to 13.9 times. China's primary aluminum industry (CPAI) is a high greenhouse gas (GHG) emitting industry and is facing a grim situation to reduce emissions. Therefore, quantifying the GHG emissions of CPAI and exploring future development trends are beneficial to the sustainable development of CPAI. In this study, the emission factor method was used to calculate the GHG emissions of CPAI from 2000 to 2020. The result shows that GHG emissions increased dramatically from 65.85 Mt CO 2 -eq in 2000 to 460.32 Mt CO 2 -eq in 2020, a seven-fold increase. GHG emissions from aluminum smelting were 363.62 Mt CO 2 -eq in 2020, which was the largest sub-process of emissions in CPAI, with a high share of 79%. Electricity emissions were the largest source of GHG emissions, accounting for more than 60%, with a maximum of 70.5%. The intrinsic drivers of GHG emissions were explored by the Log-Mean Divisia Index (LMDI) method, and the results showed that primary aluminum production was the largest driver of GHG emissions promotion, while energy intensity was the most important driver of GHG emissions suppression in the last decade. In this study, a modified "S" shaped mathematical model was used to predict the primary aluminum production, which laid the foundation for the subsequent analysis of emission reduction potential. On this basis, five types of scenarios were set based on the results of the driving force analysis. Finally, based on the results of our analysis, we propose strategies for low-carbon development in the primary aluminum industry, including the use of clean energy, and the development of new low-carbon technologies.

environmental sciences,green & sustainable science & technology,engineering, environmental

Comment on "Quantum coherence and sensitivity of avian magnetoreception".

Reducing the Carbon Footprint: Primary Production of Aluminum and Silicon with Changing Energy Systems

Decomposing the Change of CO2 Emissions: A Joint Production Theoretical Approach

Driving factors and key paths of metal consumption in China: Evidence from structural decomposition and structural path analysis

Global carbon transfer and emissions of aluminum production and consumption

Tracing metal footprints via global renewable power value chains

Environmental Implications of Future Demand Scenarios for Metals: Methodology and Application to the Case of Seven Major Metals

Online Carbon Emissions Auto-Accounting Approach in Aluminum Casting Production

Assessment of impacts of green technology and innovation on sustainable mineral resource production

Regional disparities in steel production and restrictions to progress on global decarbonization: A cross-national analysis

Decoupling analysis between economic growth and aluminum cycle: From the perspective of aluminum use and carbon emissions

Understanding the Drivers of CO2 Growth in China's Iron and Steel Sector: an Integrated Analysis of the Energy–material–economy Nexus

Decoupling of environmental impacts in the iron and steel sector is still needed beyond emissions

How Does Energy Consumption and Economic Development Affect Carbon Emissions? A Multi-Process Decomposition Framework

Spatiotemporal evolution and driving factors for GHG emissions of aluminum industry in China

Study on Circularly Polarized Patch Antenna With Asymmetric Chiral Metamaterial

Carbon-Neutral Steel Production and Its Impact on the Economies of China, Japan, and Korea: A Simulation with E3ME-FTT:Steel

Structural path decomposition of carbon emission: A study of China's manufacturing industry

Cluster characteristics of embodied carbon emissions in the international trade of metals: a sectoral-regional modeling perspective

Material efficiency at the component level: how much metal can we do without?

Greenhouse gas emissions and future development trends of primary aluminum in China