Singularity theory of fitness functions under dimorphism equivalence

Xiaohui Wang,M. Golubitsky

DOI: https://doi.org/10.1007/s00285-015-0958-0

2016-01-05

Journal of Mathematical Biology

Abstract:

What problem does this paper attempt to address?

An All‐Prussian‐Blue‐Based Aqueous Sodium‐Ion Battery

Baoqi Wang,Xiao Wang,Chu Liang,Mi Yan,Yinzhu Jiang

DOI: https://doi.org/10.1002/celc.201901223

IF: 4

2019-01-01

ChemElectroChem

Abstract:Aqueous rechargeable sodium-ion batteries have received great attention as an alternative to meet the growing demand of large-scale electrochemical energy storage systems due to the earth-abundant and low-cost sodium resources. In this study, an all Prussian-blue-based aqueous sodium-ion battery is constructed using copper and iron-based Prussian blue analogues as cathode and anode, respectively, and neutral NaNO3 solution as electrolyte. The battery delivers an average output voltage of 0.70 V, a specific capacity of 50 mAh g(-1), and good rate capability with similar to 86 % capacity retention over 250 cycles at 5 C. Moreover, the cathode, anode, and electrolyte materials are inexpensive, environmentally friendly, and inherently safe, which is particularly attractive for large-scale energy storage applications.
Achieving long-life Prussian blue analogue cathode for Na-ion batteries via triple-cation lattice substitution and coordinated water capture

Bingxing Xie,Pengjian Zuo,Liguang Wang,Jiajun Wang,Hua Huo,Mengxue He,Jie Shu,Haifeng Li,Shuaifeng Lou,Geping Yin

DOI: https://doi.org/10.1016/j.nanoen.2019.04.059

IF: 17.6

2019-01-01

Nano Energy

Abstract:Prussian blue and its analogues have attracted tremendous interests as cathode materials for sodium ion batteries because of their low cost and high capacity. However, their commercial applications are hindered by low capacity utilization and insufficient cycle life. Here, we report on a MnCoNi-co-doped Prussian blue analogue with high purity and crystallinity by a citrate-assisted controlled crystallization process. Moreover, a novel strategy of in situ capturing for residual coordinated water during sodiation/desodiation process is proposed to achieve a high cyclability by using the aluminium chloride Lewis acid as electrolyte additive. The reversible cubic-rhombohedral phase transition is revealed by in situ X-ray diffraction, ex situ X-ray absorption spectroscopy and transient electrochemical impedance spectroscopy. The MnCoNi-co-doped composite delivers a capacity of 111 mAh g−1 even at 1C and retains a capacity retention of 78.7% after 1500 cycles for sodium ion batteries. This work provides important insights on eliminating the parasitical coordinated water in lattice and modulating the crystallinity to develop high-performance Prussian blue and its analogues.
Flexible and free-supporting Prussian blue analogs /MXene film for high-performance sodium-ion batteries

Jingyun Chun,Xiaolong Wang,Chuanliang Wei,Zhengran Wang,Yuchan Zhang,Jinkui Feng

DOI: https://doi.org/10.1016/j.jpowsour.2023.233165

IF: 9.2

2023-05-26

Journal of Power Sources

Abstract:Sodium-ion batteries are the most promising alternative to lithium-ion batteries because of their low cost and environmental friendliness. Prussian blue analogs (PBAs) have attracted the attention of researchers because of their open skeleton structure and abundant redox active sites. However, the interstitial water in its crystal structure and poor electron conductivity limit its performance in sodium-ion batteries. A flexible self-supporting electrode is prepared by anhydrous preparation in a ball mill and simple filtration method. The high surface area nanoparticles and the high flexibility MXene layer in the electrode adapt to the rapid Na + dynamics, alleviating the electrode expansion. The formation of a NaF-rich cathode-electrolyte interface (CEI) layer on the electrode surface inhibits the erosion of active substances by electrolyte, reduces the capacity attenuation of the electrode, and enhances the cyclic stability of the electrode. Electrode without a conductive agent and binder shows excellent electrochemical performance. The discharge capacity of the electrode is 58.3 mAh g −1 at 1000 mA g −1 current density, and the capacity retention rate is 59.7% after 1000 cycles. This work has implications for the design of the next generation of low-cost, flexible, and fast charge and discharge energy storage devices.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Low‐Cost Zinc Substitution of Iron‐Based Prussian Blue Analogs as Long Lifespan Cathode Materials for Fast Charging Sodium‐Ion Batteries

Hang Zhang,Jian Peng,Lin Li,Yanan Zhao,Yun Gao,Jiazhao Wang,Yuliang Cao,Shixue Dou,Shulei Chou

DOI: https://doi.org/10.1002/adfm.202210725

IF: 19

2022-11-22

Advanced Functional Materials

Abstract:An inert element (Zn) substitution strategy is reported to prepare highly crystallized Prussian blue analogs (PBAs) with excellent cycling stability, fast kinetics, less volume distortion, and a highly reversible phase transition process for promising practical sodium‐ion batteries. Iron‐based Prussian blue analogs (Fe‐PBAs) are extensively studied as promising cathode materials for rechargeable sodium‐ion batteries owing to their high theoretical capacity, low‐cost and facile synthesis method. However, Fe‐PBAs suffer poor cycle stability and low specific capacity due to the low crystallinity and irreversible phase transition during excess sodium‐ion storage. Herein, a modified co‐precipitation method to prepare highly crystallized PBAs is reported. By introducing an electrochemical inert element (Zn) to substitute the high‐spin Fe in the Fe‐PBAs (ZnFeHCF‐2), the depth of charge/discharge is rationally controlled to form a highly reversible phase transition process for sustainable sodium‐ion storage. Minor lattice distortion and highly reversible phase transition process of ZnFeHCF‐2 during the sodium‐ions insertion and extraction are proved by in‐situ tests, which have significantly impacted the cycling stability. The ZnFeHCF‐2 shows a remarkably enhanced cycling performance with capacity retention of 58.5% over 2000 cycles at 150 mA g−1 as well as superior rate performance up to 6000 mA g−1 (fast kinetics). Furthermore, the successful fabrication of the full cell on the as‐prepared cathode and commercial hard carbon anode demonstrates their potential as high‐performance electrode materials for large‐scale energy storage systems.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Defect‐Healing Induced Monoclinic Iron‐Based Prussian Blue Analogs as High‐Performance Cathode Materials for Sodium‐Ion Batteries

Jian Peng,Jiaqi Huang,Yun Gao,Yun Qiao,Huanhuan Dong,Yang Liu,Li Li,Jiazhao Wang,Shixue Dou,Shulei Chou

DOI: https://doi.org/10.1002/smll.202300435

IF: 13.3

2023-05-13

Small

Abstract:In this study, highly crystalline Fe‐based Prussian blue analogs (Fe‐HCF) are synthesized via a one‐step pyrophosphate‐assisted co‐precipitation method. The as‐prepared Fe‐HCF can deliver a high specific capacity of up to 152.0 mA h g−1 and an excellent rate capability. A highly reversible three‐phase‐transition sodium‐ion storage mechanism has been revealed via multiple in situ techniques. Prussian blue analogs (PBAs) have attracted wide interest as a class of ideal cathodes for rechargeable sodium‐ion batteries due to their low cost, high theoretical capacity, and facile synthesis. Herein, a series of highly crystalline Fe‐based PBAs (FeHCF) cubes, where HCF stands for the hexacyanoferrate, is synthesized via a one‐step pyrophosphate‐assisted co‐precipitation method. By applying this proposed facile crystallization‐controlled method to slow down the crystallization process and suppress the defect content of the crystal framework of the PBAs, the as‐prepared materials demonstrate high crystallization and a sodium‐rich induced rhombohedral phase. As a result, the as prepared FeHCF can deliver a high specific capacity of up to 152.0 mA h g−1 (achieving ≈90% of its theoretical value) and an excellent rate capability with a high‐capacity retention ratio of 88% at 10 C, which makes it one of the most competitive candidates among the cathodes reported regarding both capacity and rate performance. A highly reversible three‐phase‐transition sodium‐ion storage mechanism has been revealed via multiple in situ techniques. Furthermore, the full cells fabricated with as‐prepared cathode and commercial hard carbon anode exhibit excellent compatibility which shows great prospects for application in the large‐scale energy storage systems.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Transparent aqueous rechargeable sodium-ion battery

Samantha Husmann,Maria Karolina Ramos,Aldo J.G. Zarbin

DOI: https://doi.org/10.1016/j.electacta.2022.140548

IF: 6.6

2022-08-01

Electrochimica Acta

Abstract:Aqueous sodium-ion battery is a sustainable, non-toxic, non-flammable, and low-cost alternative to lithium-ion batteries, while transparency is a growing requisite of modern and integrated devices that batteries have yet to fulfill. In this work we present the preparation of a transparent and rechargeable aqueous Na-ion battery, assembled with different thin films of carbon/cobalt-based nanomaterials as electrodes. Cobalt-filled carbon nanotubes and cobalt/cobalt oxide encapsulated carbon nanoparticles are simultaneously synthesized in one single experimental procedure and deposited as thin and transparent films through the liquid/liquid interfacial route. The former is used for the electrosynthesis of a Prussian blue analogue, yielding carbon nanotubes/cobalt hexacyanoferrate thin film nanocomposite used as cathodes, while the cobalt/cobalt oxide/carbon nanoparticles thin film is used as the anode. The transparent device is prepared using a diluted aqueous solution of NaCl as the electrolyte, reaching capacities of 22 mAh•g−1 at 2 A•g−1 that remains stable after 2000 charge/discharge cycles, and energy density of 19.2 Wh•kg−1 at 1.4 kW•kg−1.

electrochemistry
High Capacity and Fast Kinetics Enabled by Metal‐Doping in Prussian Blue Analogue Cathodes for Sodium‐Ion Batteries

Trakarn Yimtrakarn,Yi-An Lo,Jakkraphat Kongcharoenkitkul,Jui-Chin Lee,Watchareeya Kaveevivitchai

DOI: https://doi.org/10.1002/asia.202301145

2024-05-06

Chemistry - An Asian Journal

Abstract:Prussian blue analogues (PBAs) have gained tremendous attention as promising low‐cost electrochemically‐tunable electrode materials, which can accommodate large Na+ ions with attractive specific capacity and charge‐discharge kinetics. However, poor cycling stability caused by lattice strain and volume change remains to be improved. Herein, metal‐doping strategy has been demonstrated in FeNiHCF, Na1.40Fe0.90Ni0.10[Fe(CN)6]0.85·1.3H2O, delivering a capacity as high as 148 mAh g‒1 at 10 mA g‒1. At an exceptionally high rate of 25.6 A g‒1, a reversible capacity of ~55 mAh g‒1 still can be obtained with a very small capacity decay rate of 0.02% per cycle for 1000 cycles, considered one of the best among all metal‐doped PBAs. This exhibits the stabilizing effect of Ni doping which enhances structural stability and long‐term cyclability. In situ synchrotron X‐ray diffraction reveals an extremely small (~1%) change in unit cell parameters. The Ni substitution is found to increase the electronic conductivity and redox activity, especially at the low‐spin (LS) Fe center due to inductive effect. This larger capacity contribution from LS Fe2+C6/Fe3+C6 redox couple is responsible for stable high‐rate capability of FeNiHCF. The insight gained in this work may pave the way for the design of other high‐performance electrode materials for sustainable sodium‐ion batteries.

chemistry, multidisciplinary
[Pleural effusion in subacute pancreatitis].

H. Warembourg,J. Lekieffre,M. Bertrand,H. Delbecque

1966-04-01

Abstract:
Hollow Stair-Stepping Spherical High-Entropy Prussian Blue Analogue for High-Rate Sodium Ion Batteries

Yifan Zhang,Jiajia Huang,Linyang Qiu,Runyu Jiao,Yanhua Zhang,Guozheng Yang,Leiqian Zhang,Zhihong Tian,Elke Debroye,Tianxi Liu,Jean-François Gohy,Johan Hofkens,Feili Lai

DOI: https://doi.org/10.1021/acsami.4c04785

2024-05-29

Abstract:Prussian blue analogues (PBAs) are considered to be one of the most suitable sodium storage materials, especially with the introduction of the high-entropy (HE) concept into their structure to further improve their various abilities. However, severe agglomeration of the HEPBA particles still limits the fast charging capabilities. Here, an HEPBA (Nax(FeMnCoNiCu)[Fe(CN)6]y□1-y·nH2O) with a hollow stair-stepping spherical structure has been prepared through the chemical etching process of the traditional cubic structure of HEPBA. Electrochemical characterization (sodium ion battery), kinetic analysis, and COMSOL Multiphysics simulations reveal that the nature of the high-entropy and the hollow stair-stepping spherical structure can greatly improve the diffusion behavior of Na+ ions. Moreover, the hollow structure effectively mitigates the volume change of HEPBA during SIBs operation, ultimately extending the lifespan. Consequently, the as-prepared HEPBA cathode exhibits excellent rate performance (126.5 and 76.4 mAh g-1 at 0.1 and 4.0 A g-1, respectively) and stable long-term capability (maintaining its 75.6% capacity after 1000 cycles) due to its unique structure. Furthermore, the waste of the etching process can easily be recycled to prepare more HEPBA product. This processing method holds great promise for designing nanostructures of advanced high-entropy Prussian blue analogues for sodium ion batteries.
Structural Engineering of Prussian Blue Analogues Enabling All-Climate and Ultralong Cycling Sodium-Ion Batteries

Jian Peng,Weibo Hua,Zhuo Yang,Jia-Yang Li,Jinsong Wang,Yaru Liang,Lingfei Zhao,Weihong Lai,Xingqiao Wu,Zhenxiang Cheng,Germanas Peleckis,Sylvio Indris,Jia-Zhao Wang,Hua Kun Liu,Shi Xue Dou,Shulei Chou

DOI: https://doi.org/10.1021/acsnano.4c07021

IF: 17.1

2024-07-15

ACS Nano

Abstract:The development of cost-efficient, long-lifespan, and all-climate sodium-ion batteries is of great importance for advancing large-scale energy storage but is plagued by the lack of suitable cathode materials. Here, we report low-cost Na-rich Mn-based Prussian blue analogues with superior rate capability and ultralong cycling stability over 10,000 cycles via structural optimization with electrochemically inert Ni atoms. Their thermal stability, all-climate properties, and potential in full cells are investigated in detail. Multiple in situ characterizations reveal that the outstanding performances benefit from their highly reversible three-phase transformations and trimetal (Mn-Ni-Fe) synergistic effects. In addition, a high sodium diffusion coefficient and a low volume distortion of 2.3% are observed through in situ transmission electron microscopy and first-principles calculations. Our results provide insights into the structural engineering of Prussian blue analogues for advanced sodium-ion batteries in large-scale energy storage applications.
Highly crystalline Prussian blue anchored on electrospun carbon nanofibers as flexible electrode for high power sodium-ion batteries

Xiaowu Liu,Kun Liu,Renyong Liu,Jian Zhang,Hequn Hao,Juncheng Jin,Xin Chen

DOI: https://doi.org/10.1007/s11581-024-05536-y

IF: 2.961

2024-04-23

Ionics

Abstract:Flexible electrode is an important part of wearable electronics. Herein, flexible Prussian blue@Carbon nanofibers electrode is fabricated using electrospun carbon nanofiber as electron-donating agents and carbon skeletons. Cubic-shaped Prussian blue with an edge length of 140 nm is in situ deposited on the surface of carbon nanofibers by slow co-precipitation process. The unique design not only obtains the core–shell structure, which is efficient to shorten the diffusion path of sodium ions and improve the electronic conductivity, but also effectively improves the crystallinity of Prussian blue, which is conducive to the improvement of specific capacity and cyclic life. The flexible electrode exhibits superior sodium storage properties including excellent cycling stability (89 mAh g −1 after 2000 cycles at 10C with a considerable capacity retention of 92%) and exceptional rate capability (a capacity up to 90.2 mAh g −1 even at an ultrahigh current density of 50 C). In addition, the self-supporting structure effectively improves the overall energy density of the battery. The strategy using the electron-donating properties of carbon nanofibers open new perspectives to construct other flexible electrodes.

chemistry, physical,physics, condensed matter,electrochemistry
Prussian Blue@C Composite as an Ultrahigh‐Rate and Long‐Life Sodium‐Ion Battery Cathode

Baoqi Wang,Sheng-lan Yu,M. Yan,Yong Li,Shixue Dou,Yinzhu Jiang,Wenping Sun,B. Song,Yunhao Lu

DOI: https://doi.org/10.1002/adfm.201600747

2016-08-01

Abstract:Rechargeable sodium ion batteries (SIBs) are surfacing as promising candidates for applications in large‐scale energy‐storage systems. Prussian blue (PB) and its analogues (PBAs) have been considered as potential cathodes because of their rigid open framework and low‐cost synthesis. Nevertheless, PBAs suffer from inferior rate capability and poor cycling stability resulting from the low electronic conductivity and deficiencies in the PBAs framework. Herein, to understand the vacancy‐impacted sodium storage and Na‐insertion reaction kinetics, we report on an in‐situ synthesized PB@C composite as a high‐performance SIB cathode. Perfectly shaped, nanosized PB cubes were grown directly on carbon chains, assuring fast charge transfer and Na‐ion diffusion. The existence of [Fe(CN)6] vacancies in the PB crystal is found to greatly degrade the electrochemical activity of the FeLS(C) redox couple via first‐principles computation. Superior reaction kinetics are demonstrated for the redox reactions of the FeHS(N) couple, which rely on the partial insertion of Na ions to enhance the electron conduction. The synergistic effects of the structure and morphology results in the PB@C composite achieving an unprecedented rate capability and outstanding cycling stability (77.5 mAh g−1 at 90 C, 90 mAh g−1 after 2000 cycles at 20 C with 90% capacity retention).

Materials Science,Chemistry,Engineering
Boosting the Sodium‐Ion Storage Performance of Prussian Blue Analogs by Crystalline Regulation

Liangliang Qie,Yiming Chen,Guiling Wu,Xiaowen Zhang,Jiage Yu,Yuqiang Pi,Yu Ding,Feng Wang

DOI: https://doi.org/10.1002/slct.202401605

2024-08-25

ChemistrySelect

Abstract:In this study, Qie and co‐authors introduce a straightforward "chelating agent‐assisted" method for producing highly crystalline PBAs. The low structure distortion and high sodium diffusion coefficient can be attributed to the suppression of structural defects, as evidenced by in situ synchrotron powder diffraction. In the development of practical sodium‐ion batteries, electrochemical performance and cost efficiency of the electrode materials are vital considerations. Prussian blue analogs (PBAs) have emerged as promising cathode materials due to their affordability, high theoretical capacity, and cycling stability. However, low crystallinity can negatively impact their performance. This study introduces a straightforward "chelating agent‐assisted" method for producing highly crystalline PBAs. The resulting cathode boasts excellent characteristics, including a high capacity of 150 mAh g−1, an initial Coulombic efficiency of 87.2 %, a long cycling lifespan of 1000 cycles, and superior rate performance. Furthermore, the study shows that the low structure distortion and high sodium diffusion coefficient can be attributed to the suppression of structural defects, as evidenced by in situ synchrotron powder diffraction. We believe these findings have the potential to enable the widespread use of PBAs in sodium‐ion batteries for an affordable and large‐scale energy storage system.

chemistry, multidisciplinary
A Dual Effect Additive Modified Electrolyte Strategy to Improve the Electrochemical Performance of Zinc‐Based Prussian Blue Analogs Energy Storage Device

Qing Xiong,Chuanyin Xiong,Qiusheng Zhou,Mengxia Shen,Jiangnan Song,Mengjie Zhao,Yongkang Zhang,Meng An,Yonghao Ni

DOI: https://doi.org/10.1002/smtd.202401254

IF: 12.4

2024-11-03

Small Methods

Abstract:Prussian blue analogs (PBA) are a class of good electrode materials for energy storage devices, but the presence of transition metal ions dissolving in water leads to performance degradation. This paper proposes a dual effect additive‐modified electrolyte method. Through experiments and molecular simulation calculations, it demonstrates the construction of a stable and efficient PBA energy storage materials application system. Prussian blue analogs (PBA) exhibit excellent potential for energy storage due to their unique three‐dimensional open framework and abundant redox active sites. However, the dissolution of transition metal ions in water can compromise the structural integrity of PBAs, leading to significant issues such as low cycle life and capacity decay. To address these challenges, we proposed a dual‐effect additive‐modified electrolyte method to alleviate such issues, introducing sodium ferrocyanide (Na4Fe(CN)6) into aqueous alkaline electrolytes. It could not only capture Zn2+ dissolved on the surface of Na1.86Zn1.46[Fe(CN)6]0.87 (ZnHCF) electrode material during the cycling process but also conduct redox reactions on the electrode surface to provide additional capacitance. Through experiments and molecular simulation calculations, it showed that Na4Fe(CN)6 can restrict the movement of Zn dissolution into the electrolyte on the electrode surface. Based on this, an asymmetric supercapacitor based on ZnHCF//activated carbon was assembled with a modified electrolyte. The assembled supercapacitor displayed a specific capacitance of 1,329.65 mF cm−2, a power density of 2,900 mW cm−2, and an energy density of 388.28 mW h cm−2. This study provides a new idea for the design and construction of stable and efficient PBA energy storage materials by inhibiting the leaching of transition metals in PBA.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
(Invited) Recent Progress Towards Giga-Scale Sodium-Ion Batteries

Colin D Wessells

DOI: https://doi.org/10.1149/ma2023-015897mtgabs

2023-08-28

ECS Meeting Abstracts

Abstract:Ongoing lithium-ion minerals supply chain volatility has driven price increases and supply shortages, and motivates the development and commercialization of alternative cell chemistries not dependent on those minerals. 1-2 Among these alternative chemistries, sodium-ion cells offer promise due to the abundance and low cost of both sodium salts and typical electrode active species such as iron and manganese. 2-3 Among sodium-ion electrode systems, Prussian blue analogues offer unique performance advantages including high C-rate charge and discharge, long cycle life, and thermal stability. 4-6 Natron Energy has commercialized a unique sodium-ion cell in which each of the anode and cathode active materials are Prussian blue analogues. Products based on these cells are capable of full discharge at up to 60C, full recharge at up to 20C, and operate for tens of thousands of cycles without risk of thermal runaway. However, their energy density is limited by relatively low electrode specific capacities and cell voltage. This presentation will introduce the key materials science concepts that make Prussian blues a commercially viable materials system, as well as those that limit product performance, manufacturability, and the resulting applicable markets. In addition, Natron’s recent progress towards mass manufacturing of cells based on these materials will be summarized. This presentation will conclude with an overview of the key open scientific questions that must be answered for cost effective, giga-factory scale manufacturing of sodium-ion cells to become a reality. References: “2H 2021 Battery Metals Outlook: The Long Road to Recovery,” BloombergNEF, December 16, 2021. “Technology Radar: Sodium-Ion Batteries,” BloombergNEF, October 27, 2022. “2021 roadmap for sodium-ion batteries,” Nuria Tabia-Ruiz et al, 2021 J. Phys. Energy 3 031503. “Assessment of the first commercial Prussian blue based sodium-ion battery,” He, Minglong, et al, J. Power Sources 548 (2022) 232036. “Nickel Hexacyanoferrate Nanoparticle Electrodes for Aqueous Sodium and Potassium Ion Batteries,” Wessells, C.D., et al, Nano Letters 11 (2011) 5421-5425. “Monovalent manganese based anodes and co-solvent electrolyte for stable low-cost high-rate sodium-ion batteries,” Firouzi, A., et al, Nat. Commun. 9 (2018) 861.
Solid–Solid Interfacial Charge Storage of Prussian Blue/rGO Mixed-Conductor Cathode for High-Power Na Ion Batteries

Jing Zhang,Jiliang Zhang,Haihua Wang,Vincent Wing-hei Lau,Gi-Hyeok Lee,Kai Zhang,Mihui Park,Yong-Mook Kang

DOI: https://doi.org/10.1021/acsenergylett.2c02369

IF: 22

2022-11-14

ACS Energy Letters

Abstract:For the cathode materials potentially available for high power capability, reducing their particle size can improve the bulk ionic conductivity due to reduced ion diffusion length, and exploiting new reaction mechanisms must be fundamentally advantageous. However, other issues such as synthesis difficulty, poor charge-storage stability, and capacity decay can emerge. To simultaneously address these issues, in this work, we discover a reversible solid–solid interfacial storage in the space-charge region of ultrafine Prussian blue analogues (PBAs)/reduced graphene oxide (rGO), a mixed ion/electron conductor through a so-called “job-sharing” mechanism. This mechanism shows that electrons and ions can be stored in the different phases around the interface and transport only inside there, which looks thermodynamically distinct from most conventional charge-storage mechanisms in terms of the relationship between charge storage and cell voltage. The insertion cathodes governed by the job-sharing mechanism thus exhibit outstanding performance with high capacity, fast kinetics, and stable cyclability.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Prussian White Hierarchical Nanotubes with Surface‐Controlled Charge Storage for Sodium‐Ion Batteries

Wenhao Ren,Zixuan Zhu,Mingsheng Qin,Sheng Chen,Xuhui Yao,Qi Li,Xiaoming Xu,Qiulong Wei,Liqiang Mai,Chuan Zhao

DOI: https://doi.org/10.1002/adfm.201806405

IF: 19

2019-02-20

Advanced Functional Materials

Abstract:Abstract Coordination compounds such as Prussian blue and its analogues are acknowledged as promising candidates for electrochemical sodium storage owing to their tailorable and open frameworks. However, a key challenge for these electrode materials is the trade‐off between energy and power. Here, it is demonstrate that Prussian white (Na 3.1 Fe 4 [Fe(CN) 6 ] 3 ) hierarchical nanotubes with fully open configurations render extrinsic Na + intercalation pseudocapacitance. The cathode exhibits a capacity up to 83 mA h g −1 at an ultrahigh rate of 50 C and an unprecedented cycle life over 10 000 times for sodium storage. In situ Raman spectroscopy together with in situ X‐ray diffraction analysis reveal that intercalation pseudocapacitance enables full reaction of N ‐Fe III /Fe II sites in Prussian white with a negligible volume expansion (<2.1%). The discovery of surface‐controlled charge storage occurring inside the entire bulk of intercalation cathodes paves a new way for developing high power, high energy, and long life‐span sodium‐ion batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High-stability monoclinic nickel hexacyanoferrate cathode materials for ultrafast aqueous sodium ion battery

Liuxue Shen,Yu Jiang,Yuefeng Liu,Junlin Ma,Tongrui Sun,Nan Zhu

DOI: https://doi.org/10.1016/j.cej.2020.124228

IF: 15.1

2020-05-01

Chemical Engineering Journal

Abstract:Prussian blue and its analogues are regarded as superior cathode materials for sodium ion batteries (SIBs) owing to low cost, open framework and large interstitial spaces for the insertion/extraction of sodium ion. Herein, a highly stable monoclinic sodium rich nickel hexacyanoferrate (II) nanocube (m-NiHCF) has been synthesized via a facile coprecipitation method with the aid of chelating agent and surfactant. It delivers a high specific capacity of 70.1 mAh g−1 and maintains 97.1% capacity retention after 8000 cycles. Even at a high current density of 2000 mA g−1, an impressive capacity of 53.2 mAh g−1 is obtained. The fast kinetics of m-NiHCF is mainly benefited from the capacitive-controlled domination under the charge storage process. Meanwhile, ex-situ X-ray diffraction together with ex-situ X-ray photoelectron spectroscope and ex-situ Raman and ex-situ Fourier transform infrared analysis have revealed the reversible phase transition between monoclinic and cubic phases with the reaction of carbon coordinated FeII/FeIII redox-active site during extraction and insertion of sodium ion in m-NiHCF framework. Furthermore, a high voltage aqueous SIB full cell assembled with NaTi2(PO4)3@C anode achieves a high energy density of 86 Wh kg−1 with capacity retention of 83% after 600 cycles, showing great prospects in the grid-scale energy storage application.

engineering, chemical, environmental
From Lab to Application: Challenges and Opportunities in Achieving Fast Charging with Polyanionic Cathodes for Sodium‐Ion Batteries

Xueying Lu,Shuqiang Li,Yu Li,Feng Wu,Chuan Wu,Ying Bai

DOI: https://doi.org/10.1002/adma.202407359

IF: 29.4

2024-06-29

Advanced Materials

Abstract:Sodium‐ion batteries (SIBs), recognized for balanced energy density and cost‐effectiveness, are positioned as a promising complement to lithium‐ion batteries (LIBs) and a substitute for lead‐acid batteries, particularly in low‐speed electric vehicles and large‐scale energy storage. Despite their extensive potential, concerns about range anxiety due to lower energy density underscore the importance of fast‐charging technologies, which drives the exploration of high‐rate electrode materials. Polyanionic cathode materials are emerging as promising candidates in this regard. However, their intrinsic limitation in electronic conductivity poses challenges for synchronized electron and ion transport, hindering their suitability for fast‐charging applications. This review provides a comprehensive analysis of sodium ion migration during charging/discharging, highlighting it as a critical rate‐limiting step for fast charging. By delving into intrinsic dynamics, we identify and summarize key factors that constrain fast‐charging characteristics. Innovative modification routes are then introduced, with a focus on shortening migration paths and increasing diffusion coefficients, providing detailed insights into feasible strategies. Moreover, the discussion extends beyond half cells to full cells, addressing challenges and opportunities in transitioning polyanionic materials from the laboratory to practical applications. This review aims to offer valuable insights into the development of high‐rate polyanionic cathodes, acknowledging their pivotal role in advancing fast‐charging SIBs. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Stepwise Hollow Prussian Blue Nanoframes/Carbon Nanotubes Composite Film as Ultrahigh Rate Sodium Ion Cathode

Ping Wan,Hui Xie,Nan Zhang,Shuang Zhu,Changda Wang,Zhen Yu,Wangsheng Chu,Li Song,Shiqiang Wei

DOI: https://doi.org/10.1002/adfm.202002624

IF: 19

2020-07-15

Advanced Functional Materials

Abstract:Prussian blue and its analogues (PBAs) have been proposed as promising cathode materials for sodium‐ion batteries (SIBs) due to high theoretical capacity and low cost, but they often suffer from poor electronic conductivity and structural instability. Herein, a stepwise hollow cubic framework structure is first designed and a hybridized hierarchical film synthesized from single‐crystal PBA nanoframes/carbon nanotubes (CNTs) composite is demonstrated as a binder‐free ultrahigh rate sodium ion cathode. This hierarchical configuration offers improved tolerance for lattice expansion, reduced sodium ion diffusion path, enhanced electronic conductivity, and optimized redox reactions, thereby achieving the excellent rate capability, high specific capacity, and long cycle life. As expected, the developed FeHCFe nanoframes/CNTs electrode film exhibits a super high rate capacity of 149.2 mAh g−1 at 0.1C and 35.0 mAh g−1 at 100C. Moreover, it displays an excellent cycling stability with about 92% capacity retention at 5C after 500 cycles. This work will pave a new way to engineer advanced electrode materials for ultrahigh rate SIBs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Singularity theory of fitness functions under dimorphism equivalence

An All‐Prussian‐Blue‐Based Aqueous Sodium‐Ion Battery

Achieving long-life Prussian blue analogue cathode for Na-ion batteries via triple-cation lattice substitution and coordinated water capture

Flexible and free-supporting Prussian blue analogs /MXene film for high-performance sodium-ion batteries

Low‐Cost Zinc Substitution of Iron‐Based Prussian Blue Analogs as Long Lifespan Cathode Materials for Fast Charging Sodium‐Ion Batteries

Defect‐Healing Induced Monoclinic Iron‐Based Prussian Blue Analogs as High‐Performance Cathode Materials for Sodium‐Ion Batteries

Transparent aqueous rechargeable sodium-ion battery

High Capacity and Fast Kinetics Enabled by Metal‐Doping in Prussian Blue Analogue Cathodes for Sodium‐Ion Batteries

[Pleural effusion in subacute pancreatitis].

Hollow Stair-Stepping Spherical High-Entropy Prussian Blue Analogue for High-Rate Sodium Ion Batteries

Structural Engineering of Prussian Blue Analogues Enabling All-Climate and Ultralong Cycling Sodium-Ion Batteries

Highly crystalline Prussian blue anchored on electrospun carbon nanofibers as flexible electrode for high power sodium-ion batteries

Prussian Blue@C Composite as an Ultrahigh‐Rate and Long‐Life Sodium‐Ion Battery Cathode

Boosting the Sodium‐Ion Storage Performance of Prussian Blue Analogs by Crystalline Regulation

A Dual Effect Additive Modified Electrolyte Strategy to Improve the Electrochemical Performance of Zinc‐Based Prussian Blue Analogs Energy Storage Device

(Invited) Recent Progress Towards Giga-Scale Sodium-Ion Batteries

Solid–Solid Interfacial Charge Storage of Prussian Blue/rGO Mixed-Conductor Cathode for High-Power Na Ion Batteries

Prussian White Hierarchical Nanotubes with Surface‐Controlled Charge Storage for Sodium‐Ion Batteries

High-stability monoclinic nickel hexacyanoferrate cathode materials for ultrafast aqueous sodium ion battery

From Lab to Application: Challenges and Opportunities in Achieving Fast Charging with Polyanionic Cathodes for Sodium‐Ion Batteries

Stepwise Hollow Prussian Blue Nanoframes/Carbon Nanotubes Composite Film as Ultrahigh Rate Sodium Ion Cathode